No sound after Win 7 install w/Pavillion a1430n

Hey, I've just did a full install of Windows 7 on my HP Pavillion A1430N and I've got no sound. Got the red x next to the speaker in the icon tray. I've seen while searching that loosing the sound is common with this upgrade/install, but I haven't seen my issue specifically. When I do the sound troubleshooter, it claims that the speaker/headphones are not connected. Though they are. I've connected front and back of PC using the designated jacks and have used two different sets of speakers. The device manager says that there is a sound device and that it is working properly. When I hit the tabs for more details on the driver, etc.., I get a very generic, "High Definition Audio Device", but no specifics. Says driver version 6.1.7600.16385, by microsoft. appreciate the help
This question was solved.
View Solution.

Realtek HD Audio_choose High Definition Audio Codecs,accept agreement, then get the "Executable" file:
http://218.210.127.131/downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownTyp...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

After win xp install?????

what do i do after win xp is installed...i reboot and it stays in win xp...i want to boot into osx...any help much appreciated!!! thanks in advance!!
this is a new macbook 1.8 ...it is for work...i installed a brand new win xp system earlier today... the mac os was all up to date, was done via software update....

the moment you see the gray screen hold down the option key and it will bring up mac osx or windows

No sound after trying to install audio unit

After trying to install M-Tron and failing, G Media instructed me to dump M-Tron and start over. Now I have no sound at all from Garageband. Any suggestions? Do I need to reload Garageband and if so, how? it came w/the iMac.

Software inst., previous soundfiles, loops. The volume indicator shows a good strong signal playing. It is just not making it to the speakers which are working when I play something on iTunes. Garageband was playing fine a couple of days ago so I'm thinking is that it is a Garageband problem possibly caused by my problems with loading M-Tron.

Satellite P100-257 - No sound after Win 7 installation

Need help...
I have Satellite P100-257, upgraded from XP to WIN 7. Now my sound device don't work.
I installed driver, but still nothing. In device properties says: device not installed.
However, when I run diagnostic, says that driver has problems and that problem will be fixed after reinstalling driver.
So, it keeps me in the loop all the time.
Tried download some drivers from net, even buy Toshiba Recovery Disk for my model (payed 15$ !!!! for gad's sake!!!!)...
Now, my knowledge here is limited, so any tips, suggestions, solutions are more than welcome!
Thanks!

Thanks m8!
Acctually, after 2 days cracking my head about it, I was this close to buying new machine :)
But, solution was acctually more simple than I thought...And felt so stupid after I finally figured it. Well, Win 7 is more similar to XP than it is to Vista, so I just run simple chec for XP sound drivers on Toshiba download support web site, and it came with one driver for this specific model: *sound-20071106151533.zip* driver. Just needed to check in driver properties for compatibility (XP service pack 3 mode) and simple install...That was it... Run smoothly on WIn 7.
Sometimes, only solution is the simplyest one :)
Thanks anyway!

No sound after windows 10 install

I installed windows 10 Enterprise on separate partition with windows 7 on a different partition it boots fine and lets me choose which system on boot. Windows 7 works fine as always including sound, so that eliminates hardware issues, but when I
boot into Windows 10 their is not sound. I tried playing cds, dvds, and video files but no sound. I tried hulu and netflix still no sound. I checked the sound mixer and it looks fine. I checked the driver in the device manager for the
sound card and it says its working properly but still no sound. I welcome any suggestions. My motherboard is a MSI MS-7788 and the sound card is a realtek hd audio. I also tried the audio troubleshooting app but no issues were detected.

Go into services and start Windows audio, doing it as admin. My machine does this constantly. Evens sometimes, cannot start the windows audio service and forced to reboot. When the service won't start, says that the account I am using is not the same as
some of the other services that use audio. Dependencies show RPC is involved and have not checked further into why RDC is listed. Not sure why after some minutes passes, the services again stops, was not set to even start, not maunal, not delayed auto or auto.
I have it set to auto now but it still keeps stopping on its own, and sometimes requires a reboot. Does not hold the settings in services if I change it, even as an admin.

No sound after windows 7 install on T60p

1. connect the Win7 to internet...it should find drivers with WindowsUpdate
2. there is a program on Lenovo site...it can find all the drivers needed 4 ur computer...have to look & home how is it called?check download: http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t60
3. also, check FAQs here: http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t60

Another thing that might be close...
I've installed Win7 64-bit on a second HDD. It is Ok to choose boot with 'option' key, but another option is missing: while in win7 apple's bootcamp control panel shows both MacHD and Win7 bootable partitions, so I can tell 'software way' to boot to win or to Snow Leo. It's OK. However when I open 'startup disk' in OS X there's only Mac HD so if I need to reboot to windows I can't just do it with several clicks. I actually have to shut down OS X, wait for boot screen, press option and then wait for the boot options to appear and them choose. It's 'a bit' annoying, let alone windows version of bootcamp seems to do the job smarter. And it really is a good thing to choose "reboot into desired OS" with a click and go to kitchen for tea or something and not seat in front of the machine waiting for boot screen...
Am I missing something? Is it done the other way then 'system preferences>startup disk'?

No sound after i've install alsa...

Hello, i've just install alsa and install everything as i read <a href="http://wiki.archlinux.org/index.php/ALSA_Setup">here</a> and everything seems to work fine, but still i can't here anything...
This is my card: ALSA(sound): Creative Labs|Sound Blaster AudioPCI64V/AudioPCI128 module: snd-ens1371.
My modprobe.conf:
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.9a ---
alias snd-card-0 snd-ens1371
alias sound-slot-0 snd-ens1371
# --- END: Generated by ALSACONF, do not edit. ---
My rc.conf:
MODULES=(snd-ens1371 snd-pcm-oss)
My modules:
[root@arch ~]# lsmod
Module Size Used by
snd_pcm_oss 49536 0
snd_mixer_oss 17408 1 snd_pcm_oss
snd_ens1371 19620 2
snd_rawmidi 20736 1 snd_ens1371
snd_seq_device 6732 1 snd_rawmidi
snd_ac97_codec 83356 1 snd_ens1371
snd_pcm 83496 3 snd_pcm_oss,snd_ens1371,snd_ac97_codec
snd_timer 22020 1 snd_pcm
snd 45412 12 snd_pcm_oss,snd_mixer_oss,snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
soundcore 7456 1 snd
snd_page_alloc 8360 1 snd_pcm
Any ideas?
Thanks Advanced!

Wha?!?
I've unmuted the sound and the volume is 100%(XFCE4-MIXER).

Can't restore win 8.1 after win 10 install

I have a Yoga Tablet 2-1051f. I installed Windows 10 but just didn't like it. During installation ot created a recovery file on my SD card. I tried to revert back to windows 8.1 but after it finally rebooted, boot failed. I get error code 0xc000025. It says I need an installation disc and to PRESS THE WINDOWS KEY FOR UEFI FIRMWARE SETTINGS. Of course I can't do this because the keyboard doesn't link. Does anyone have any ideas how to recover my tablet? Thanks

Turned out it was a problem with PRAM. I reset the PRAM (holding Command + Option + P + R) after "Windows could not update the boot configuration". And ran the install disc once more and it worked!
Hope this helps somebody.

IPod Touch 5 not recognized by iTunes after Win 8 install

The heading pretty much says it all. Can anyone help? Ever since Windows 8 Pro install I have not been able to connect my iPod Touch 5th gen to iTunes.
I never had this problem with windows 7.
- I connect my iPodTouch by cable to the USB
- The computer recognizes the iPod TOuch
- I can access the iPod Touch from My Computer
- iTunes does not recognize it. It doesn't pull it up as a device. All other iTunes servies work fine.
I have...
1. The most up to date version of iTunes.
2. Restarted my computer multiple times.
3. Powered down, reset, my iPod Touch multiple times.
4. I have downloaded all computer updates recommend from my manufacturer (Asus) for Windows 8 Pro compatability

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar
Then see:
iOS: Device not recognized in iTunes for Windows
I would try the following first
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Where Can I find The Toshiba Assist on P505 after Win 7 Install?

Hello,
I am just wondering where can I find or download the previous Toshiba icons and programs had on my taskbar on Windows Vista which came pre installed o my laptop, ever since I upgraded to Windows 7 I cant seem to find them anymore. I only have Toshiba PC Health Monitor and Toshiba HDD Protection, am I missing one more? I think I am.
Can someone please help.

Anyone?

Amd video drivers not working after win 10 upgrade

AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.

Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

Videos on my macbook pro won't play sound after apple tv was installed in the house

Hi! Need some help... for christmas my dad received the little black Apple TV device to watch videos on our big tv from his iPad. After it was installed no sound came from my macbook, it instead comes out of the tv speakers. When dad is airplaying a video from his iPad and I open a video on my mac, the iPad video gets interrupted and the sound from my video comes on without the visual. What's going on?! I see the airplay symbol on the top right bar but it always says disconnected, yet obviously the sound is somehow connected.

that figures, VLC.
Consider getting your dad the APP VLC streamer for his Ipad, that way he can wifi beam movies etc. to his Ipad from any Mac.
removes putting movies on an Ipad and clogging it up with large movie files. Very handy

Bad sound after installing Leopard

After my Leopard install the iTunes sound is horrible. It sounds like AM radio ...
When I play the same song over Frontrow it sounds fine....
What could be wrong?
Ch

I shut down iTunes and then started again ... now the sound is ok ...

So long sound after installing iTunes 7.7

Upgraded to iTunes 7.7. Had no issue with the download, installed just fine. Closed down iTunes and re-opened to ensure updates were correct. Had a window pop up stating, "iTunes has detected a problem w/ audio configuration. Audio/Video playback may not operate properly". This was immediately after the install of 7.7, iTunes was working properly on older version. Checked other media programs (Windows Media Player), nothing will play any audio or video files. Also tried re-booting, no luck. According to my system info, my sound card is not installed. Re-installing the sound card is separate issue, but issues of 7.7 causing this problem before? Any suggestions or tips to downgrade to older iTunes. I have a 2nd Gen. Nano if that makes a difference. (Never had issues before when upgrading versions.)

I ran disk utility from my Leopard DVD, repaired the disk. The sound worked upon restarting.

After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity. Right before i installed additional content I was working on a project, and everything was OK.

After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity.
Right before i installed the additional content I was working on a project, and everything was OK. What is wrong. How do I make Logic reconnect to the instrument files?

Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

No sound after Win 7 install w/Pavillion a1430n

Similar Messages

Maybe you are looking for