No sound after windows 7 install on T60p

1. connect the Win7 to internet...it should find drivers with WindowsUpdate
2. there is a program on Lenovo site...it can find all the drivers needed 4 ur computer...have to look & home how is it called?check download: http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t60
3. also, check FAQs here: http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t60

Another thing that might be close...
I've installed Win7 64-bit on a second HDD. It is Ok to choose boot with 'option' key, but another option is missing: while in win7 apple's bootcamp control panel shows both MacHD and Win7 bootable partitions, so I can tell 'software way' to boot to win or to Snow Leo. It's OK. However when I open 'startup disk' in OS X there's only Mac HD so if I need to reboot to windows I can't just do it with several clicks. I actually have to shut down OS X, wait for boot screen, press option and then wait for the boot options to appear and them choose. It's 'a bit' annoying, let alone windows version of bootcamp seems to do the job smarter. And it really is a good thing to choose "reboot into desired OS" with a click and go to kitchen for tea or something and not seat in front of the machine waiting for boot screen...
Am I missing something? Is it done the other way then 'system preferences>startup disk'?

Similar Messages

No sound after windows 10 install

I installed windows 10 Enterprise on separate partition with windows 7 on a different partition it boots fine and lets me choose which system on boot. Windows 7 works fine as always including sound, so that eliminates hardware issues, but when I
boot into Windows 10 their is not sound. I tried playing cds, dvds, and video files but no sound. I tried hulu and netflix still no sound. I checked the sound mixer and it looks fine. I checked the driver in the device manager for the
sound card and it says its working properly but still no sound. I welcome any suggestions. My motherboard is a MSI MS-7788 and the sound card is a realtek hd audio. I also tried the audio troubleshooting app but no issues were detected.

Go into services and start Windows audio, doing it as admin. My machine does this constantly. Evens sometimes, cannot start the windows audio service and forced to reboot. When the service won't start, says that the account I am using is not the same as
some of the other services that use audio. Dependencies show RPC is involved and have not checked further into why RDC is listed. Not sure why after some minutes passes, the services again stops, was not set to even start, not maunal, not delayed auto or auto.
I have it set to auto now but it still keeps stopping on its own, and sometimes requires a reboot. Does not hold the settings in services if I change it, even as an admin.

I m unable to access apple os after windows 7 instalation and its not giving the boot option

i m unable to access apple os after windows 7 instalation and its not giving the boot option. plz any one help me out .. how to fix it or how to delete windows 7 on my macbook

Reboot, as soon as you hear the chime press and hold the option key, when the Boot Manager appears select OSX.

No network connection after windows 10 install

No internet connection after windows 10 install- laptop wont recognize any wi-fi networks- repair option on MY ATT has no option for windows 10 system

Hi,
Sorry about that. One other thing to try is to try this in the command prompt:
Start - All Programs - Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt. [For Windows 8 or 10: <Windows Logo> + x - Command Prompt(Admin)]
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog
Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log
Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log
Reboot the machine
If still having issues, you may need to uninstall your network adapter and install it again.
-ATTU-verseCare

Lack of sound after Window 7 (64) installation into iMac OX 10.6.7. Tried to install driver from Snow Lepard disc (Cirrus 64).Wizard installed driver. No sound, Device Manager indicated that "driver is not installed" but also that the"device is working"

I don't know how to proceed. I didn't have sound after installing Windows 7 inot iMac OX 10.6.7 (64bit) After unsuccessful attempt to upgrade the driver from the BootCamp file, I deleted the driver from the Sound and Game controlled hoping that I would allow me to automatically install the correct driver from Boot camp.
Now the Sound Video Game controller disappeared from the Device Manager
How can I find out which is the correct sound driver for my computer (The Speaker Properties only say:WIndows)?
How can I install it without seing the Sound and Game controller in the Device Manager?

When you say "manually download", you mean from the BootCamp File on Snow Leopard, or from the Internet.
My additional problem is that the "Sound and Video Game Controller" disappeared from the Device Manager when I removed the previous driver. I don't find the place where I can reistall the new driver.

Microphone doesn't work after Windows clean install

I have a satellite A135-S4677 (Part# PSAD0U-0N700P) which came with 32 bit vista.
I recently did a 32 bit windows 7 clean install on a new hard drive. Everything works fine except the internal microphone which does not work. If I connect an external mic it works. Speakers work fine.
I have tried the Toshiba Software Installer but it didnt help
I have tried both drivers on toshiba's website for Realtek but it still doesnt work
driver_audio_realtek_TC40053600B.exe
driver_audio_realtek_TC40064600A.exe
Anything else I can try. Please help
Thank you.

Satellite A135-S4677
After a clean install, the order of loading first the Toshiba supplied hardware drivers and hardware utilities, then the Toshiba utilities and software is critical for success.
1st Hardware Drivers & Hardware Utilities
1) Chipset related
2) Display
3) Sound
4) All other hardware drivers & hardware utilities
2nd Toshiba Utilities & Toshiba Software
1) Toshiba Value Added Package (TVAP)
2) Toshiba Flash Card Utility (sometimes included in the TVAP)
3) All other Toshiba utilities and Toshiba software
Also, Toshiba laptops are very finicky about only using Toshiba supplied hardware drivers to work properly, and those drivers supplied by Windows Update and/or the chip makers. That's why I recommend disabling automatic Windows Updates. To do this, click 'Start - All Programs - Windows Update', on the menu at left click on 'Change settings', under 'Important updates' click on the drop down menu at right and choose 'Never check for updates (not recommended)', and click OK. Then only manually check for Windows Updates, check all available updates carefully, and never allow Windows Update to change any of your hardware drivers. Though you should still regularly check for updates.
So, after disabling automatic Windows Updates, try downloading and installing these drivers in this order, and see if it resolves your mic problem.
Intel Chipset SW Installation Utility for Windows 7 (32/64)
Intel Display Driver for Windows 7 (32)(v8.15.10.1825)
Realtek Audio Driver for Windows 7 (32/64)(v6.0.1.5904)
Please let us know what happens. Good luck.
Mike

Satellite Pro U200 - No sound after Windows 7 installation

Hi,
I'm having a problem with the sound after installing Windows 7 on a Satelite Pro U200 (PLUA1E). No Win7 sound driver found on the Nordic driver website. Please help.
G.Magnason

Hi buddy,
Have you already checked the Toshiba website itself?
http://eu.computers.toshiba-europe.com
I found a sound driver for Vista 32bit and the most Vista drivers also work on Windows 7 so its worth a try!!! :)

Strippe Problem after windows re-install...

Hi,
I'm the happy owner of a K8N Diamond Plus with, as you know, two raid controllers onboard (NVidia & Silicon Image).
I've been using two strippe (Raid0) on the two raid controllers for 6 months now w/o any problem...
Since my windows became unstable, i've decided to do a fresh windows xp re-install.
My system boots from a strippe (connected to the NVidia Raid controller, 2x250Gb Raid0) w/o any problem BUT after reinstalling windows and installed the
silicon image raid driver it couldn't recover the strippe (raid0) connected to the silicon image controller (drivers & utility are installed correctly).
How can i recover my partitions on this strippe !!
I really need to recover those because i've really valuable data on those drive.
I can't understand why my raid0 & my partitions where automaticaly recovered when installing the drivers & software... It works fine with all other raid controllers i've ever used.. (promise & nvidia)
Any help appreciated..
Yves

Hello !!
MSI released new silicon image drivers for this mobo, install them while windows setup using F6.
You can find them here:
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=710&kind=1
Greetz

No sound after Windows XP reinstall

# Hello Everyone,
I reinstalled Windows XP and now my sound isn't working. I have all the drivers installed, the card is acti've and shows as working in the Device Manager. When I start the computer, I get the Windows sound when Windows loads, at least the first couple of seconds of it, then it stops and no more sound. Any help will be appreciated.

' Rognarok,
. In Control Panel, Sound and Audio Devices, Audio tab, is your Soundblaster selected as the default Recording and Playback device? Also, you may want to place a check in the box next to "Use only default devices."
2. In Control Panel, Administrati've Tools, click on Services. Make sure Windows Audio is started and set to Automatic.

Satellite P35-S6112 - No sound after Windows 7 installation

I installed Windows 7 on this Satellite P35-S6112 with a Realtek AC97 sound card in it. The card and drivers are working but there is no volume. I can hear sound with a headset very faint. I have uninstalled, reinstalled, attempted update but I have the current drivers installed.
Troubleshooting has been done and system reports no issues. I am in desparate need of help here as my daughter needs this for her college as her other notebook is in the shop. Any help is greatly appreciated!!

I have checked US support page and this old notebook is not supported for WIN7 so Im glad to hear you have installed Win7 successfully.
If the sound card driver is installed properly I dont understand what do you mean with there is no volume. Can you use speakers symbol in task bar and change speakers sound level?
Click also on speakers symbol and open Playback devices. Can you set Speakers to be default device?
Which OS have you used before Win7 installation? Have you noticed the same problem?

No sound after trying to install audio unit

After trying to install M-Tron and failing, G Media instructed me to dump M-Tron and start over. Now I have no sound at all from Garageband. Any suggestions? Do I need to reload Garageband and if so, how? it came w/the iMac.

Software inst., previous soundfiles, loops. The volume indicator shows a good strong signal playing. It is just not making it to the speakers which are working when I play something on iTunes. Garageband was playing fine a couple of days ago so I'm thinking is that it is a Garageband problem possibly caused by my problems with loading M-Tron.

Computer OS wont startup after windows 10 install

Hello im having problem booting my system after installing windows 10 . I made the installation and it worked fine from upgrading from 8.1. But then I wanted to format the drive and at the format menu it got stuck at 2 % and then I restarted the computer. Now it will hang at hp logo and go back to the same logo again. Do I have to replace my hard drive?

From what I understand, if you completed the Windows 10 install and all went to completion, then you are supposed to be able to do a clean install with the Windows 10 DVD or USB download. With a working computer, GO TO THIS PAGE and scroll down to the "Download Tool button" Pick the 64 Bit version. Once clicked it will ask if you want a DVD or USB for the iso.Once it is done and you have either the DVD or the USB version, see if you can then install Windows 10. If that fails, you might need to replace the hard drive.

Z580 won't boot after Windows 7 Install

Hi,
After a clean install of windows 7 on the hard drive, Lenovo Z580 wont boot up but when hard drive it put into my old Acer laptop, boots fine.
Initially had to remove the hard drive from the Lenovo and put into another laptop to install windows 7 as lenovo wouldnt boot from usb or CD. And then after install tried putting hard drive back into Lenovo and just doesn't boot at all. Just goes to boot manager sceen and then blank in a continous loop.
Please help!
Thanks in advance!

Welcome to the forum!
"remove the hard drive from the Lenovo and put into another laptop to install windows "
You stated the exact reason for your problem. You can't install Windows 7 on one laptop and expect it run on another by swapping the hard drive. It doesn't work. During the installation Windows inventories the installed hardware and configures itself accordingly. Since they are two different machines, Windows won't boot. You are going to have to resolve the USB or Optical drive boot problem on the Lenovo laptop you wish to install Windows on.
During bootup have you tried using the Boot Menu to boot the machine specifically from the optical drive?
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

How do I use existing sync key after Windows clean install?

Hi,
I had setup Firefox Sync on my old Windows 7 install and I have the Sync Key given during the set up. I had to clean install (format C drive) my Windows.
Is there any way I can use the old Sync Key to get all my bookmarks and stuff back?

The problem has resolved itself...
...despite spending several pointless hours trying to delete the existing BootCamp drivers without success, I finally restarted Windows yet again - and this time I was easily able to delete the existing drivers.
I then restarted my Mac, installed the latest drivers without issue and it all works just fine.
Windows, eh?!

Can't get Fn keys to work after Windows 7 install

I have completed the Windows 7 install but can't get the Fn buttons to work. I have found and installed the 'flash cards' which seems to do a similar thing but would like the proper Fn button as well.
Does anyone know which of the drivers does this?
thanks,
Tim.

Hi
Hardware FN keys doesn't work in Vista or Seven even if you had TVAP installed.
You can use the Key via Flash cards, to do that you need to open flash card
settings and select "allow to show flash cards on mous over" (or someting similar).
Now you can use the functions of flash cards, but you can't use it via key, i'll hope with the new relase of TVAP could fix that problem.

No sound after windows 7 install on T60p

Similar Messages

Maybe you are looking for