No sound and am unable to compress

I have a Sony Handycam and have noticed that when I download my videos to my desktop there is no sound. I downloaded MPEG Streamclip and it pretty much took care of the problem, but it has also created new issues.
A. Once I convert the video through MPEG I am not able to put the movie into imovie, whereas if I don't convert it (leave it w/out sound) then I can.
B. If I were to try to import clips directly from my Sony Handycam the program says I still need to plug in my camera (even though it is). It's just not reading it. I don't see a way to set it to "VCR" as I've seen demonstrated in the demo.
I am ultimately trying to compress some videos to post on youtube and also would like to burn dvd's. But it seems that beacause I can't ge through imovie I am also not able to work w/the videos in idvd.
Also, is there a way to convert .mpg's from my sony digital camera (I took some small videos w/it. This isn't my video cam)? When I pulled those videos off the camera they were mpg's and I'm not seeing a way to convert them.
Any advice would be appreciated. I've been working on this for about 3 months and have made absolutely no progess. *pulls out hair*
Thanks!
nicollette

Sorry for all the edits, I'll just tack on the new question here.
With SC open to "export" my setting choices are as follows:
Compression - set to: DV (DV25)
Standard - set to: NTSC, 720x480,29.97fps with PAL option in drop-down box. I'm think PAL is for non-US DVD's?
*Aspect Ratio* - set to: 4:3 with a 16:9 option in drop-down box.
*I also have an option to "check" any of the following:*
Frame Blending
Better Downscaling (currently checked)
Deinterlace Video
Resample Audio to 48KHZ (currently checked)
Split DV stream in Segment (use this option to prepare the stream for imovie) currently not checked but I now realize it needs to be.
*"Deselect (the following) for progressive movies -*
Interlaced Scaling (currently checked)
Reinterlace Chroma (currently checked)
Rotation - set to: No
Zoom: 100% X/Y: 1 Center: 0,0
Cropping (currently unchecked)
Presets
*Reset All*
Adjustments...
I'm not sure what most of these settings do/affect. Is there something online that explains each of these steps? To export an mpg1 for use to burn as a dvd (just copy directly from desktop, not using a program) or for use in imovie/idvd I'm not sure where the settings need to be before I export.

Similar Messages

Media Offline not offline and unable to re-import sound and movie files

I'm getting the dreaded red Media Offline screen and I've tried everything to fix it. To explain I am working on a movie with sound and various bunches of still images imported as numbered stills to be automatically converted to a movie for an exhibition. All well and I was bringing the finished project into Encore when something happened... I don't know, maybe it's because all of the files are on an external hard drive (LaCie) and I had to plug into the LaCie another harddrive with my CS4 install files on it to install Encore... Whatever it was it broke the connection and even though all the files are still there Premiere can't see them. And when I try and re-import them it gives me the message "File video dimensions (width/height) too large" even though it is the same project. And it gives me the same message even with the sound file. From googling I have tried: deleting .xmp files on the HD, repairing disk admissions, creating a new project in Premiere and re-importing the files to see if that worked - didn't work, still kept up the same "File video...too large" message and this is even after..re-updating the software (up-to-date but re-installed it anyway).
I can only think of two other things: it's the hard drive or to get CS6 somehow. Can anyone suggest something else to fix?

Well it can't be a codec problem either as I am mostly only using jpegs in numbered stills. anyone help?

Equium-A100-147 - broken sound and video

Hi everyone,
I have the Equium A100-147, Its been working fine for last couple of year.
But in the last few weeks has get problem in sound and video (broken sound and video).
The sound is breaking and sometimes uable to listen + video breaking and so much delay due to its get so slow with so much sound distorsion etc..
This remains after new installation (format HDD) of Wind XP unable to fix even installed new drivers.
The Device Manager shows all drivers including audio and video working ok, d'nt know what's problem please help me.
Thanks.

Hi
Something like that can happen during high HDD activity this means that the reading/writing process could affect the sound/video playback
But usually this should not take long time
At the other hand this can happen because of higher temperature
High temperature can affect the CPU and GPU performance
I think you have used this notebook for couple of month without any troubles in my opinion you should check if cooling modules and fans are clogged and could remove the dust and debris from cooling modules use compressed air spray this helps p get rid of dust
Maybe then the notebook will run much better

Pls Help. Sounds and ringtones wont open after software update

Hi Im using BB Bold 9700 and after I did the update to 5.0.0.862 I was unable to open the sounds and ringtones to change my SMS tonw, pls help I already rebooted my device and still unable to open that menu..

Hello Crimson_Night and welcome to the BlackBerry Support Community Forums.
If you go into the Media player, are you able to hear the tones?
Try clearing out the Sounds/Profiles database as shown in KB10167 and reconfigure them.
Let me know how you make out.
Thanks! And have a great day
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.

i placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.

I don't know if this will work but it's worth a try. I wonder if somehow you ended up with a short inside of your iPad. Give the things below are trying to see if that helps. Good luck.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

*FIXED* No sound and 'No Audio Device' in Control Panel. *FIX

I?m having a problem with my sound. Basically all I get is a system sound, which means no sounds from itunes but the error prompt sounds still play. I?m tempted to say that this is a detection issue because of several things:
-First, when looking in the ?sounds and audio devices? in the control panel I get grayed out selections and a ?no audio device?.
-Secondly, when running the directX diagnostic tool (typing ?dxdiag? in the ?run? window) I get several troubling indications. First under device I have no manufacturer or product ID. Second under drivers I have (copied from dxdiag text file):
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8//2006 4:45:38, 499584 bytes
Other Files:
Seems hunky-doorey but then I have a note at the bottom that reads:
Sound Test Result: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
I have seen another similar post that seemed to have the same problem, but they didn?t provide much information and the fix was to pull out the audio card, run start up, turn it off, and then put it back in and run start up. If this is what needs to be done, could I have a picture or something of what the sound card looks like?
This problem started when I tried to update my sound card and since then my sound has been? possessed? or prone to working at sometimes and then (most of the time)failing at others.
Here is the dxdiag.txt file without the lengthy directShow filters and directx components:
System Information
Time of this report: 5/9/2007, 2:8:45
Machine name: GURU7892COMPUTE
Operating System: Windows XP Home Edition (5., Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension XPS
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz (2 CPUs)
Memory: 022MB RAM
Page File: 436MB used, 2026MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.280 32bit Unicode
DxDiag Previously: Crashed in system information (stage 3)
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab : No problems found.
Sound Tab : DirectSound test results: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RADEON 9800 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9800 PRO AGP (0x4E48)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_002&DEV_4E48&SUBSYS_3002002&REV_00
Display Memory: 28.0 MB
Current Mode: 52 x 864 (32 bit) (75Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 600,200
Driver Name: ati2dvag.dll
Driver Version: 6.4.000.6660 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 2/6/2006 9:50:46, 26368 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 2/6/2006 9:50:29, 98464 bytes
Device Identifier: {D7B7EE2-0D08-CF-B669-080AC2CB35}
Vendor ID: 0x002
Device ID: 0x4E48
SubSys ID: 0x3002002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C-6FB7-44F5-908-056BF2EE449D}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{552C0DAD-CCBC-420B-83C8-74943CF9FA6}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: SB Audigy 2 Audio [CF00]
Default Sound Playback: Yes
Default Voice Playback: No
Hardware ID: PCI\VEN_02&DEV_0004&SUBSYS_00302&REV_04
Manufacturer ID:
Product ID:
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8//2006 4:45:38, 499584 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Standard
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 92000
Static/Strm HW Mix Bufs: 64, 62
Static/Strm HW 3D Bufs: 64, 62
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
Sound Capture Devices
Description: SB Audigy 2 Audio [CF00]
Default Sound Capture: No
Default Voice Capture: No
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
Date and Size: 8//2006 4:45:38, 499584 bytes
Cap Flags: 0x4
Format Flags: 0xFFF
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: .00.006.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
SB Audigy 2 DirectMusic Synthesizer [CF00], Hardware (Kernel Mode), Output, DLS, Internal
SB Audigy 2 Audio [CF00], Software (Kernel Mode), Output, DLS, Internal
Registry: OK
Test Result: All tests were successful.
DirectInput Devices
Device Name: Mouse
Attached:
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached:
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x24D7
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 23:08:42, 57600 bytes
| Driver: usbd.sys, 8/29/2002 03:00:00, 4736 bytes
Gameport Devices
PS/2 Devices
+ Logitech PS/2 Keyboard
| Matching Device ID: *pnp0303
| Upper Filters: L8042Kbd
| Service: i8042prt
| Driver: i8042prt.sys, 8/3/2004 23:4:36, 52736 bytes
| Driver: kbdclass.sys, 8/3/2004 22:58:32, 24576 bytes
| Driver: L8042Kbd.sys, 2/0/2004 2:47:58, 3056 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 0:0:07, 40840 bytes
| Driver: kbdclass.sys, 8/3/2004 22:58:32, 24576 bytes
|
+ HID-compliant MX58 Optical Mouse
| Vendor/Product ID: 0x046D, 0xC0E
| Matching Device ID: hid\vid_046d&pid_c0e
| Upper Filters: LMouKE
| Lower Filters: LHidKE
| Service: mouhid
| Driver: mouhid.sys, 8/7/200 3:48:00, 260 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:32, 23040 bytes
| Driver: LHidKE.Sys, 2/0/2004 2:48:46, 24704 bytes
| Driver: LMouKE.Sys, 2/0/2004 2:48:40, 68992 bytes
| Driver: KHALMNPR.Exe, 2/0/2004 2:45:26, 4952 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 0:0:07, 40840 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:32, 23040 bytes
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: Not run
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM
DirectPlay8 Serial Service Provider: COM2
DirectPlay8 TCP/IP Service Provider: Wireless Network Connection - IPv4 -
DirectPlay Voice Codecs
Voxware VR2 .4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.0 3 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Age of Empires II (DX7) - Registry: OK, ExeFile: Empires2. ICD (0.4.0022.072)
Age of Empires II - The Conquerors Expansion (DX7) - Registry: OK, ExeFile: \age2_x.icd (0.07.0025.064)
Dungeon Siege 2 (DX7) - Registry: OK, ExeFile: DS2.icd ()
Dungeon Siege II Demo (DX7) - Registry: OK, ExeFile: DS2.icd ()
MechWarrior Black Knight (DX7) - Registry: OK, ExeFile: MW4x.exe (45.05.000.070)
MechWarrior Vengeance (DX7) - Registry: OK, ExeFile: MW4. ICD (.30.0004.908)
Star Wars JK II Jedi Outcast (DX7) - Registry: OK, ExeFile: jk2mp.exe ()
WDM Streaming Data Transforms:
Microsoft Kernel Acoustic Echo Canceller,0x00000000,0,0,,
Microsoft Kernel GS Wavetable Synthesizer,0x00200000,,,,5.03.2600.280
Microsoft Kernel DLS Synthesizer,0x00200000,,,,5.03.2600.280
Microsoft Kernel DRM Audio Descrambler,0x00200000,,,,5.03.2600.280
Video Compressors:
WMVideo Encoder DMO,0x00600800,,,,
WMVideo8 Encoder DMO,0x00600800,,,,
MSScreen encoder DMO,0x00600800,,,,
WMVideo8 Encoder DMO,0x00600800,,,,
WMVideo9 Encoder DMO,0x00600800,,,,
MSScreen 9 encoder DMO,0x00600800,,,,
DV Video Encoder,0x00200000,0,0,qdv.dll,6.05.2600.280
Indeo? video 5.0 Compression Filter,0x0000000,,,ir50_32.dll,5.2820.005.0058
Indeo? Video 5.2 Compression Filter,0x0000000,,,ir50_32.dll,5.2820.005.0058
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.05.2600.274 9
3ivx D4 4.0.4,0x00200000,,,qcap.dll,6.05.2600.280
Cinepak Codec by Radius,0x00200000,,,qcap.dll,6.05.2600.280
DivX ;-) MPEG-4 Low-Motion,0x00200000,,,qcap.dll,6.05.2600.280
DivX ;-) MPEG-4 Fast-Motion,0x00200000,,,qcap.dll,6.05.2600.280
DivX? 6.. Codec (2 Logical CPUs),0x00200000,,,qcap.dll,6.05.2600.280
Intel 4:2:0 Video V2.50,0x00200000,,,qcap.dll,6.05.2600.280
Intel Indeo(R) Video R3.2,0x00200000,,,qcap.dll,6.05.2600.280
Intel Indeo? Video 4.5,0x00200000,,,qcap.dll,6.05.2600.280
Ligos Indeo? XP Video 5.2,0x00200000,,,qcap.dll,6.05.2600.280
Intel IYUV codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft H.26 Video Codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft H.263 Video Codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V2,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V3,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft RLE,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft Video ,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft Windows Media Video 9,0x00200000,,,qcap.dll,6.05.2600.280
XviD MPEG-4 Codec,0x00200000,,,qcap.dll,6.05.2600.280
DivX? 6.. YV2 Decoder,0x00200000,,,qcap.dll,6.05.2600.280
Audio Compressors:
WMA Voice Encoder DMO,0x00600800,,,,
WM Speech Encoder DMO,0x00600800,,,,
WMAudio Encoder DMO,0x00600800,,,,
Indeo? Audio Software,0x00500000,,,iac25_32.ax,2.00.0005.0054
Vorbis Encoder,0x00200000,,,OggDs.dll,0.09.0009.0005
IAC2,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie CELP 4.8kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 8kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 2kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 6kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
IMA ADPCM,0x00200000,,,quartz.dll,6.05.2600.2749
PCM,0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode2),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode3),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode+),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode2+),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode3+),0x00200000,,,quartz.dll,6.05.2600.2749
Microsoft ADPCM,0x00200000,,,quartz.dll,6.05.2600.2749
ACELP.net,0x00200000,,,quartz.dll,6.05.2600.2749
DSP Group TrueSpeech(TM),0x00200000,,,quartz.dll,6.05.2600.2 749
Windows Media Audio V,0x00200000,,,quartz.dll,6.05.2600.2749
Windows Media Audio V2,0x00200000,,,quartz.dll,6.05.2600.2749
GSM 6.0,0x00200000,,,quartz.dll,6.05.2600.2749
Messenger Audio Codec,0x00200000,,,quartz.dll,6.05.2600.2749
Microsoft G.723.,0x00200000,,,quartz.dll,6.05.2600.2749
CCITT A-Law,0x00200000,,,quartz.dll,6.05.2600.2749
CCITT u-Law,0x00200000,,,quartz.dll,6.05.2600.2749
MPEG Layer-3,0x00200000,,,quartz.dll,6.05.2600.2749
Midi Renderers:
Default MidiOut Device,0x00800000,,0,quartz.dll,6.05.2600.2749
WDM Streaming Capture Devices:
SB Audigy 2 Audio [CF00],0x00200000,3,2,,5.03.2600.280
WDM Streaming Rendering Devices:
SB Audigy 2 DirectMusic Synthesizer [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Sw Synth [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth A [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth B [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Audio [CF00],0x00200000,3,2,,5.03.2600.280
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,,msdvbnp.ax,6.05.2600.280
Microsoft DVBC Network Provider,0x00200000,0,,msdvbnp.ax,
Microsoft DVBS Network Provider,0x00200000,0,,msdvbnp.ax,6.05.2600.280
Microsoft DVBT Network Provider,0x00200000,0,,msdvbnp.ax,
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,,0,psisrndr.ax,6.05.2600.280
MPEG-2 Sections and Tables,0x00600000,,0,mpeg2data.ax,
WDM Streaming Mixer Devices:
Microsoft Kernel Wave Audio Mixer,0x00000000,0,0,,
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,,0,encdec.dll,6.05.2600.280
Encrypt/Tag,0x00200000,0,0,encdec.dll,6.05.2600.280
XDS Codec,0x00200000,0,0,encdec.dll,6.05.2600.280
Audio Renderers:
CyberLink Audio Renderer for Dell,0x00200000,,0,cladr.ax,3.05.0000.2409
Default DirectSound Device,0x00800000,,0,quartz.dll,6.05.2600.2749
Default WaveOut Device,0x00200000,,0,quartz.dll,6.05.2600.2749
DirectSound: SB Audigy 2 Audio [CF00],0x00200000,,0,quartz.dll,6.05.2600.2749
WDM Streaming System Devices:
SB Audigy 2 DirectMusic Synthesizer [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Sw Synth [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth A [CF00],0x00200000,0,2,,5.03.2600.280
SB Audigy 2 Synth B [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Audio [CF00],0x00200000,2,2,,5.03.2600.280Message Edited by guru7892 on 05-20-20072:43 PM
Message Edited by guru7892 on 05-24-200705:55 PM

I found that once you reinstall your sound card you need to make sure you hook everything back up correctly.
basically all you need to do is run a start up with your sound card out ofyou computer and then re-run start up with the card back in.

Unable to Compress the request of a Cube

Hi All,
I was trying to compress the cube data,At one request I got stuck. When ever I try to compress that request manually, but it is unable to compress the request and sends the following job logs
Job started
Step 001 started (program RSCOMP1, variant &0000000000190, user ID XXXXXX0006)
Performing check and potential update for status control table
No requests needing to be aggregated have been found in InfoCube 0XX_X01
Compression not necessary; no requests found for compressing
Compression not necessary; no requests found for compressing
Job finished
After further analysis, I observed the request which I am compressing , has an selective deletion.Since its is 2year old data I would like to compress the data,please suggest is it possible to compress,If the request has selective deletion.
please suggest.
Thanks & Regards,
Abdul

Hi Abdul,
Check that, if the cube that is being compressed feeds the data to a different InfoProvider, if yes then complete that laod first and then do the compression. this might be the reason sometimes. if the cube is not feeding anything currently try compressing the request again.
In some cases ,when the compression is manually performed (in the tab collapse of the cube) no compression would be done. In those cases you can try creating a process chain with only the compression step. This often solves the problem.
If both the above process don't solve your problem,
Try the SAP note :407230 (such problems occure after installing SP15.)
Regards,
Sudheer.

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

Adobe Media Encoder lost sound and had 128MB file - Why?

Guys,
Any help would be appreciated. I usually use Adobe Media Encoder to convert my files to flv or f4l - But something happened on the way to the party - The file was an .avi file about 100MB and AME would give me a file of about 128MB with no sound and the conversion took about 11 minutes. Someone on another forum suggested Xilisoft Video Converter I had never used. This thing got the sound right file was 48MB and it was done in ONE MINUTE AND 48 SECONDS...
Obviously I was doing something wrong with Adobe Media Encoder can anyone suggested what I was messing up.
Cheers,

Hi,
I do not know exactly the setting to did in the AME, but this problem generally happned when you do not select to export the sound along with the video and do not set a compression for the output video.
Hope this helps
Rafiq

IMac won't turn on. Only a clicking sound and a grey folder with flashing question mark.

iMac won't turn on. Only a clicking sound and a grey folder with flashing question mark.
Help.

Your iMac is actually turning ON as proven by the grey folder with the flashing question mark.
The flashing question mark indicates that your system is unable to find a bootable volume. The clicking sound that you hear is probably coming from your hard drive while it tries to recalibrate. I suspect your hard drive has failed.
What model imac do you have? If it's under warranty I suggest taking it in for service. Hopefully you've been maintaining a regular backup of your data as all users should. I lost my data once and it was a valuable lesson. I back up regularily now.
If your iMac came with install disks then you can boot from them, choose your language when asked, then pull down the Utilities menu to launch the Disk Utility application. The Disk Utility application will allow you to verify whether your hard drive has an issue. Usually a clicking sound, assuming it's coming from the hard drive, is a sign of a bad hard drive.
If your system has Lion installed then you can hold down the Command and R keys when you restart the system, then launch the Disk Utility application from the menu that appears.

I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

Hi nitramred,
To start troubleshooting this issue where you are unable to adjust the volume after receiving a call, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
Take care,
Alex H.

Trouble with sounds and banners

I have installed my email address from my company website on on iPhone 5 and I am unable to receive either sound and banner alerts when i receive a new email and I am unable to open new mailboxes on my email. I seem to have all the right buttons on and my iCloud email and text messages are working fine and alert e by sound and banner when a new mail or message arrive.
Thank you
Tracy

That's a very general question. I think you'd get a better response if you included the version of Parallels you're asking about, any machine information you have, any Windows information you have, and any specific concerns you have / specific questions you have on any Parallels problems.
Have you googled a bit? I seem to remember a recent Parallels 6.x release; their web page certainly should have Lion information by now.

Sound and vibration colormap to measurement file

Evening,
Still pretty new to the both labview and the sound and vibration suite so probably a basic question on data types i cant get my head round.
I want to the data from a colormap to a tdms file for future analysis but cat get the correct type of data for the measurement file function
Essenstially i've used used the 3rd order function for a while when writing motor gearbox specifications, so not just sound pressure level but also type of noise (eg happy baby at 60dB vs screaming baby at 60dB)
I want to go a step further and see how these values change over short periods of time hence colormap but cant seem to be able to record the data.
I've attached a very basic vi of what i want to do and left the 'bad data type wire' in to show what i want to achive. i've searched extensively all the normal places but been unable to find any discussions or examples close.
Any help would be greatfully
Received
Martin
Attachments:
Sound Map_v002.vi ‏146 KB

Hello Mjm1968,
When you hover over the broken wire with Context Help on (Ctrl-H), you can see that it's a bundle of multiple data types. Right click on the broken wire, and you can go to Cluster, Class, & Variant Palatte » Unbundle By Name. Attach the left side of that node to the wire, and you can break out all of the components of the signal, which you can feed to a Build Array node (as necessary), and then into a Write to Measurement File VI. If that slows down your loop too much, we can look into some other options, but that may be the simplest solution to writing to a TDMS file.
Chris H
Applications Engineer
National Instruments

Shift between sound and image ?

Hi there!
I have a weird issue on my computer: there is a tiny shift between the sound and the image: the image goes faster than the sound, which is very annoying, especially when the movies are long. Sometimes it works perfectly and it seems to be because the computer is busy doing something else in the background. Otherwise when I'm just running quicktime, the shift appears... But I am not sure this is because of that actually. Any idea ? Thank you a lot !

Any idea?
Afraid I don't fully understand your question. If you are asking why this occurs, the reasons most frequently are:
1) Camcorder audio recorded at 12 bits is converted/captured by harware/software that expects audio to be in a 16-bit format. In this case audio data is processed in groups of 16-bits where only 12 represent a discrete unit of coded sound.
or
2) "Muxed" source file using custom/non-standard bit rates and/or VBR audio is converted to a "frame-to-frame" sync format file. In this case, audio and video is "demuxed" to individual intermediate audio and video streams before final conversion to the target format. Once again, the intermediate audio usually expects a fixed/constant number of bits to represent a discrete unit of coded sound.
Basically, what's happening is that the audio and video streams of information are no longer of the same length when laid out side by side (i.e., "frame-to-frame) and, thus, the audio and video are "out of sync." Specifics may vary. It all depends on the actual source formats, as well as, the manner in which the final streams are merged. Most frequently, the audio track ends up shorter than the video track. If they are merged by starting both tracks at the same time ("added"), then the audio gradually diverges from the video more and more throughout the movie and by the end of a long clip can be noticeable "out of sync." If the tracks are merged by "adding and scaling" one of the tracks, then the problem is somewhat more difficult to define. In this case, the beginning and end of the movie may be nticeable "out of sync" while the middle may almost seem to be "in sync."
Now, if you are asking about solutions, then those depend on the source of the problem. Where the problem is merely in the camcorder setting, change it. If it is in the conversion/capture by hardware/software and user settings are available, then change them. If no such user settings are available, consider changing your work flow. (E.g., capture/convert using different hardware, software, or methodology such as digital-analog-digital double conversion where all else fails). Lastly, you could attemtp to "fix" the problem in "post-production." While is should be a last resort, many good editor applications do allow you to analyze the audio graphically and scale (compress/expand) tracks in order to "re-sync" them. While I have yet to try the utility myself, a dedicated application called "Movie Sync v1.0" is currently available for Mac machines. This utility allows the user to loop audio at a desired point in order to "locally" re-sync audio and video. (I can only assume a localized "scaling" is being performed.)
Does that help?

Help!! Static sound and Lock ups

I recently updated to the newest Ipod Mini version software 1.4. and when i play the songs on my ipod i get static sounding sounds and when i look at the display timer, it looks like the ipod i slowing down.
Also i'm getting lockups when i'm browsing.
Ipod service told me to restore the ipod, and i have 3 times, 1 to the factory software version, and twice to the newer version. It didn't help, as i'm still hearing static sounds, and I've switched headphones and headphone jacks, and it still doesn't help.

the exact same thing happened to me. Mine is an original mini which needless to say is out of warranty, so I need an answer that is not "replace the hardware". Is there a way to restore it to a previous version of the software?
mini Windows XP
Windows XP

No sound and am unable to compress

Similar Messages

Maybe you are looking for