No sound and meters do not move with the new Motu Traveler
I recorded four channel of audio with the built in sound on my power book G4 1.6 until I got a Motu Traveler fire wire audio interface. I got to preference/Audio in Logic and switch to Motu. Then when I play the song, there is no sound and the channel meters do not move. I have Logic Pro 7 version 1.0.1. I updated the OSX Tiger to 10.4.2 and the Motu fire wire to 1.2.5.2.
I can here audio throe head phones on the Motu if I plug a mic in to it but it will not show up in Logic.
Yes the fire wire cable is connected. It reacts to logic start up (click,click etc,.)
What am I doing wrong.
I'm an ex Cubase user whom switched to Logic and thought it would be easy.
I dont use logic but I have had some similar audio routing issues with my mac and my traveler. if you can hear audio out your phones see if the default stereo output for the traveler is set to phones, that could cause this problem. click on the motu fire wire icon (not the cue mix dsp) and make sure you default outs are set to whatever you have speakers plugged in, also go into your audio midi set up for OSX and make sure every thing is for the traveler to be the default output. you might have to re-launch logic to make it see the changes, not sure though i dont use it.
Similar Messages
-
I Have a 2nd gen iPod and it will not sync with the new update of iTunes is there a fix coming for this or not I'd hate to have to buy a new iPod if I don't have to
Have you tried syncing manually using the manual method included in
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
Was the iPod previously synced to another computer/iTunes library?
Next wold be to retore from backup.
iOS: How to back up -
Menu Bar - Sound Volume icon does not move with the press of the F key
So I normally press the F keys to control the Sound Volume, right, just like everyone else does -
but the Sound Volume icon in the Menu Bar at the top right does not respond to the F key at all!
Isn't it supposed to react simultaneous with the press of the F key?
I have to actually use my mouse click to make that volume go up and down.
The actual volume does work with the F key, it goes up and down.
But to make the 2 work in sync, I have to point the mouse to the one at the Menu Bar, fiddle with it, and then I can use the F key and both work together at the same time.
If I haven't touched the Menu Bar one for a while and I only use the F key, the Menu Bar one doesn't move at all.
It's weird. Any ideas?I see what Al is seeing. Normally I just use one method or the other. The Volume Adjustment keys provide visual feedback, so it's unnecessary to check the menu extra, i.e. the Volume menu bar icon, to see the same feedback.
The slight delay in the reaction of the Volume menu extra, when open and while adjusting the volume with the Volume keys is normal.
They're independent methods for adjusting the Volume setting. The Volume menu extra takes a moment to refresh when the slider is displayed and you're changing the setting via the Volume keys.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
It's probably really easy to figure this out and uninstall the updates but, well, I'm slightly tech-illiterate! I use my Norton Toolbar a lot for those sites I visit infrequently, and this non-compatibility issue is the same reason I stick with Mozilla over Chrome, but now I can't even use my Norton information with Mozilla. Thanks.
http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788
-
When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?
Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling -
The sound does not sync with the new iMovie (In Mavericks)
I've finally managed to update my old projects to iMovie 10.0 but the sound does not sync.
Is it my computer (Mac Pro Late 2008) who can not cope with the new iMovie??
Could it be that my Graphics card can not be bothered with?
GeForce 9400M and GeForce 9600M
Excuse my bad english! :-/I have MacBook Pro!
-
I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host> -
I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
my iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud. However, when i change documents on my mac (documents that are supposed to be in the iCloud), the changes do not sync with my other devices nor with iCloud. Even when i create new documents on my mac and save them to iCloud, all seems okay and i can access them from my mac, however they do not show up in the iCloud and i can't access them with my other devices.
Most recent version of mountain lion updated over a month ago. New iPad in use for over a month.
thanksThe same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password. Typical when today I'm waiting some important emails!
-
I try and buy in app purchases but it won't let me and gives me the above error message: "iTunes password and account is not synced with the email address"! How can I fix this?
Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.
-
Dear Ones,
I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanxsee if this is helpful : [http://support.mozilla.org/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
i'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk
Page 5, step 2, #2, 2nd bullet.
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.7.pdf -
I got a new computer and my IPOD will not sync with the new computer.....I have a ITUNES account on the new computer and is downloading music just fine but it will not sync to the IPOD....What should I do to sync my IPOD? thanks
Copy the ENTIRE iTunes folder from the old computer to the new computer.
Attempts to sync an iDevice to a new computer will remove all content from the device and replace it with content from the new, empty library. -
The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem
Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...
Maybe you are looking for
-
How can I transfer photos from my Imac OS9 to a Macbook Pro OS 10 ? 10
How can I transfer photos from my Imac OS9 to a Macbook Pro OS 10 ?
-
ITunes 6 - still can't see CDs
Okay, I was having this problem in iTunes 5.0.1.4, as well. When I put an audio CD in either of my drives (external or internal), it doesn't show up in iTunes. My work-around right now is to rip the CD to mp3 using RealPlayer, then import the mp3 fil
-
This problem has just started, only with CC 2014. It doesn't happen with CC or CS6. When I open a particular layered file, then Duplicate it, then close the original Master file I get the "text engine" warning box when I try to enter text in the copy
-
HELP!!! Oracle Developer 6.0 Install
Can someone PLEASE!!! tell me where to get the above software
-
Hi Can any one Please tell me which is the NEW GL table which got replaced with GLPCA. I am in need of LIFNR (Vendor), Profit Centre, EBELN (Purchase document number). I am not able to get from FAGLFLEXA and T aswell. Reg Ashok