No Sound At All After 1st Burn

I'm working in iDVD 6.0.4 and burn a DVD and everything is fine. The first DVD comes out great. When it asks me if I want to make another copy, I simply put another DVD in and it starts ripping away. However, the second DVD has absolutely no sound at all on any of the videos. The menus though, have sound. ???
Any clues?

Doesn't sound logical. A workaround is to duplicate your good DVD with Roxio Toast or Apple's Disk Utility.
Another approach is to Save As Disk Image from iDVD; make sure this virtual DVD works fine, and then copy the disk image to an actual disk with Disk Utility. Slow down the burn speed in Disk Utility (perhaps to half the speed of your burner, or to 1x or 2x, to reduce burning errors).
John

Similar Messages

No sound at all after 10.4.6 update

Hi, does the 10.4.6 update have a firmware update included ?, because after restart etc no sound at all eminates from my powerbooks built in sound.
No start up chime, system sounds .... nothing [only thing i can see in "sound on the system prefs is a greyed out "headphones" for output device]?
if so anyway of "going back" to a prior "firmware ? or has anybody else had this issue and resolved it ?
TIA secondhead.
PB 17" 1.5 Mac OS X (10.4.6)

heydez and mtd,
If the solution provided in this thread doesn't help, please start a new topic thread, unless you have another solution to help the original poster. The link below gets you to a point where you can click on Post a New Topic:
http://discussions.apple.com/forum.jspa?forumID=752&start=0
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.
Audio works just fine in 10.4.6. Both of you have some contributing factor that is causing it to fail.

No sound at all after trying to fix Flash Player 9!

Can someone please help me? I couldn't hear sound in YouTube,
so I tried the following (according to someone else's post):
Simply copy the following text to a text file
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Drivers32]
"midimapper"="midimap.dll"
"msacm.imaadpcm"="imaadp32.acm"
"msacm.msadpcm"="msadp32.acm"
"msacm.msg711"="msg711.acm"
"msacm.msgsm610"="msgsm32.acm"
"msacm.trspch"="tssoft32.acm"
"vidc.cvid"="iccvid.dll"
"VIDC.I420"="i420vfw.dll"
"vidc.iv31"="ir32_32.dll"
"vidc.iv32"="ir32_32.dll"
"vidc.iv41"="ir41_32.ax"
"VIDC.IYUV"="iyuv_32.dll"
"vidc.mrle"="msrle32.dll"
"vidc.msvc"="msvidc32.dll"
"VIDC.YVYU"="msyuv.dll"
"wavemapper"="msacm32.drv"
"msacm.msg723"="msg723.acm"
"vidc.M263"="msh263.drv"
"vidc.M261"="msh261.drv"
"msacm.msaudio1"="msaud32.acm"
"msacm.sl_anet"="sl_anet.acm"
"msacm.iac2"="C:\\WINDOWS\\system32\\iac25_32.ax"
"vidc.iv50"="ir50_32.dll"
"wave"="wdmaud.drv"
"midi"="wdmaud.drv"
"mixer"="wdmaud.drv"
"VIDC.WMV3"="wmv9vcm.dll"
"VIDC.VP40"="vp4vfw.dll"
"msacm.voxacm160"="vct3216.acm"
"MSVideo"="vfwwdm32.dll"
"MSVideo8"="VfWWDM32.dll"
"wave1"="wdmaud.drv"
"midi1"="wdmaud.drv"
"mixer1"="wdmaud.drv"
"aux"="wdmaud.drv"
"vidc.VP70"="vp7vfw.dll"
"vidc.X264"="x264vfw.dll"
"VIDC.FPS1"="frapsvid.dll"
"vidc.VP60"="vp6vfw.dll"
"vidc.VP61"="vp6vfw.dll"
"vidc.VP62"="vp6vfw.dll"
"vidc.DIVX"="DivX.dll"
"VIDC.UYVY"="msyuv.dll"
"VIDC.YUY2"="msyuv.dll"
"VIDC.YVU9"="tsbyuv.dll"
"VIDC.DRAW"="DVIDEO.DLL"
"VIDC.YV12"="yv12vfw.dll"
"wave2"="wdmaud.drv"
"midi2"="wdmaud.drv"
"mixer2"="wdmaud.drv"
"aux1"="wdmaud.drv"
"wave3"="wdmaud.drv"
"midi3"="wdmaud.drv"
"mixer3"="wdmaud.drv"
"aux2"="wdmaud.drv"
"VIDC.MSUD"="msulvc05.dll"
"wave4"="wdmaud.drv"
"midi4"="wdmaud.drv"
"mixer4"="wdmaud.drv"
"aux3"="wdmaud.drv"
Save it as missing.reg (Make sure you include the Windows
Regestry Editor Version 5.00 line) and then double click on the
saved file to import it into your regestry and hey presto, you now
get sound of flash content. You may have to reedit your sound
scheme when you have finnished but at least flash content now works
properly.
Now, I can't hear sound at all and my computer refuses to
play CD's, iTunes, Windows Media Player, etc. Under 'sounds and
audio devices', it says that it can't find the location of my audio
codecs, legacy audio drivers, media control devices, legacy video
capture devices, and video codecs. Someone please help!! I'm going
crazy!!!

oh i forgot to say that i have windows xp and my browser is
firefox.

No sound at all after windows re-install. Both x-fi and onboard! neo4-f

Well i just reinstalled Windows along with:
AMD 64 3700+
msi neo4-f
1gb ocz ddr400
250gb WD sata
x1900xt 512mb
x-fi xtrememusic
masscool 460w (made by sytrin)
and i am getting 0 sound. I cant get either of my onboard or my x-fi to work. I cant even get into windows with my x-fi installed.. it just keeps rebooting before it gets to the windows screen. I have the latest chipset drivers and have installed the latest realtek AC97 drivers as well (after uninstalling x-fi stuff)... What is going on?! The onboard sound worked fine before i reinstalled windows..

Please firstly make sure that your audio controller has been enabled in the bios; Then please check in the device manager to see whether there is yellow mark like"!" or "?" on the audio controller. If it is in that case, I suggest you uninstall the audio drivers and reisntall the drivers to have another try.

HT202157 For a while now sound is slow to come on with Apple TV. We have no sound at all after an hour. We are running with the 5.2 update.

Sound isn't coming on with Apple TV. Sound works otherwise.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

No sound at all After Installat

I just bought a sound blaster li've 24 bit card last night installed it without a fuss the computer see's the card everywhere i.e volume control etc. I disabled my onboard integrated sound card but still no sound comes out of my speakers kinda stuck here any help?

I am also having this problem. Went to the store and bought a new Sound Blaster Li've 24 bit sound card. Installation of the card went fine, installation of the software went great. However no sound. I restarted, disabled my integrated sound card. My computer, also, see the card and says it's working fine. I am getting no sound out of two sets of speakers that I know work (one is digital one is analog). I ran the diagnostic and it said I passed. And also my microphone is not working. Thanks for any help with us as I believe we have the same problem...
Have an ASUS mobo with SoundMAX integrated audio. I am running Win2000 and have 52mb RAM, Athlon 2400+.

In my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to S

in my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to Sort out the Problem?

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

Hi
Try in iDVD
• Save as a DiskImage
• Play this by use of DVD-player tool
Still OK or problems ?
If OK - Burn it by use of
• Apple Disk Util tool - or -
• Roxio Toast™ (if You got this - I love it)
Yours Bengt W

After downloading the latest update my pc has no sound at all, can anyone help?

after downloading the latest update my pc has no sound at all, can anyone help?

Try reading the suggestions here: http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/

After Firefox updated itself to 3.6.12 I lost sound regarding all facebook applications

after Firefox updated itself to 3.6.12 I lost sound regarding all facebook applications and videos. I have installed the latest flash and that doesn't solve the problem

After Firefox updated to 3.6.12, my homepage stated that I did not have the Flash Player installed. The latest player was installed, but I uninstalled and attempted to re-install. The installation process worked, but the Adobe Flash banner on their page does not Flash like when a proper install occurs. The Adobe DLM add on will not allow me to change options on Firefox Addon page. Now Flash content on homepage will not play, and I am forced to use IE to view content.

After 5 minutes, all sound goes all grainy and distorted PLEASE HELP!!

Hello people,
After 5 minutes, all sound goes all grainy and distorted!! Using Logic Pro 8.
This happens especially if I crank the speakers semi-loud. This is not a problem with the speakers as Itunes plays perfectly. I have no idea why this is happening! The problem disappears when I restart Logic only to reappear again 5 minutes later.
The sound goes super grainy and I cant really make out anything. Is Logic overloading the sound card or something? Although this never happened before and it is a Tascam US-144, usually very good.
If anyone knows why this is happening I'd really appreciate some help.
Thank you, all the best!!
Tristan

Hello and thank you for your time! The speakers I do believe are active in that they have their own power source. They are Behringer MS40's. The headphones indeed also suffer the graininess, any sound that comes out of the sound card via Logic!
At the moment the buffer is at maximum of 1024 with a large Process Buffer Range as it runs more smoothly this way. Does it help if I change this? Is there any other settings I can try changing which may realistically fix the problem? Unfortunately the technical side is not my forte, being a songwriter rather than a producer.
Yes Itunes also plays via the Tascam with perfect results!
Unfortunately, this distorted sound and graininess happens with every Logic project, the more Audio tracks it seems, the more frequently.
You have been very kind, thank you. If you have any ideas of how I can fix this then please do let me know.
PS. Something I noticed is that this started happening after some guy screamed into the Mic for a laugh whilst recording and the project instantly crashed. I do believe there is a connection between the Audio tracks and the grainiess rather than the MIDI tracks.
Sometimes I can get a good 15/20 minutes of working time before the sound becomes distorted again! Which is what I've been doing these past 2 days.
All the best,
Tristan

After recent download of update to iPad, I now have no sound and all my games are slow.What happened?

I recently downloaded the offered update to iPad. Now I have now sound and all my games are slow. Plus, anything with a video while surfing can't be viewed. Does anyone know hat happened and how to fix it?

1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo.

After download an application from the app store on my iPad i lost all sound for all my application, how do i sought this out?

i lost sound for all my application on my ipad 3, how do i resolve this problem

Is it all apps or do Music and Videos apps still have sound ? If they do then have you got notifications muted ? Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Lost all sounds except ringtone after recent upgrade

No sound except ringtone after recent upgrade followed by the upgrade fix. Since the ringtone was only affected I didn't notice immediately! If I plug in my headphones everything works. Unable to use volume buttons on side unless headphones are plugged in, the volume symbol with white dots doesn't even appear anymore. The volume control in itunes music only works when plugged into headphones otherwise it can't be adjusted. Worked with apple support tried everything include a restore to new still no go! It appears that a few people are having the same problem and seems weird that it happened after last upgrade!

If you are unable to adjust the volume without headphones even after restoring, then the iPhone thinks it's plugged into a dock or cable. This is the behavor that will happen if you plug your iPhone in to the car or iHome dock to play you music and sounds, but a docked connection will never play ringtones through the dock connection and headphones override that dock connection which is why your headphones work.
How does the phone think its connected to a dock? Well, this can happen if the charging port gets wet at some point or if some trauma happens in there like pushing the cable in when it doesnt fit, etc.
So it happens even after restoring what do I do? Service your iPhone. https://selfsolve.apple.com

Text sound before and after touchstone usage

I have had a ton of issues since I purchased a touchstone for my pre.     Before the touchstone, no issues at all. After:
- 1st/2nd and 3rd phones:   Every time I put a phone on the touchstone it charged & uncharged for hours (the ring was going off all night) in another room didn't know & burned out the ringer.       Phone and stone too hot to touch.     Finally confirned it was the touchstone that was the issue & they got me a new one.(after trying everything else)
- 4th phone. Text sound was a little higher pitched UNTIL I put on the Stone.   Then it went to the lower quieter one. Also had an issue where the phone was scratching so got a new one.
- 5th phone.   Did not use the touchstone. It was fine. Brought back to Sprint b/c when I got home realized they had forgotten to put the back for the stone on the phone.    They put it back on,. Got it home & ringer was lower again.
Could the issue just be the back from the touchstone???     I'm starting to think the touchstone needs to go back.
Anyone else have this issue?
Thanks!
Post relates to: Pre p100eww (Sprint)

For general Adobe program installation, I have compiled this Tips & Tricks article: http://forums.adobe.com/message/3419692#3419692
In his PrE books, Steve Grisetti has a very useful set of appendices on setting up one's computer, to run PrE as smoothly, as possible. I find his tips to be very useful.
Good luck, and I am sure that others will have more thoughts on this.
Hunt

No Sound At All After 1st Burn

Similar Messages

Maybe you are looking for