No sound at all on hp compaq nx8220 notebook

My HP COMPAQ nx8220 notebook with Windows XP OS has no sound at all.
The Notebook has problem booting and the OS was reinstalled.
After the installation, there was no sound at all.
I do not have the driver CD for the mother board, so I down loaded the sound driver from HP website.
The installed driver looks okay from the Device Manager, but still no sound at all.

Hi,
Please click on the link below that offers solutions for fixing problems that you may be experiencing with sound. There are several reasons that you may not hear sound coming from your notebook PC.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00035555&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
The methods mentioned in the above link fix several sound failures. Perform the steps in order until you hear sound from the speakers. The methods that are listed in this document apply to the sound devices and speakers that were originally installed on HP Notebook PCs.
I hope the above document helps you in fixing the issue.
I am an HP employee.
Regards,
Jashy
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.***Click on “Kudos” STAR to say thanks!***
I work for HP

Similar Messages

My new macbook pro has little to no sound on all video's. I've changed all the settings but it's still no loud. is there something i've missed trying?

my new macbook pro has little to no sound on all video's. I've changed all the settings but it's still no loud. is there something i've missed trying?

Turn off Find My iPhone in iCloud on the iDevice.
Log out of iMessage, Facetime, remove Apple ID from iTunes & App Store.
Use Settings > Reset > Erase All Content and Settings.
Then set it up as a new iPhone with your own Apple ID.

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

My ipod classic has started making a mewing sound and all it does is scroll through the songs. It will not play except when connected to my computer. I tried resyncing and that did not work. How do I fix this problem?

My ipod classic has started making a mewling sound and all it does is scroll through the songs. It does not play on my Bose sound dock or through earbuds. It will play when connected to the computer...but that makes it hard to take it on a walk with me I thought it might be a synching problem so tried that--still doesn't work. How do I fix this problem with out restoring it to the factory setting? I do not want to lose all my music content as some of it I cannot replace easily. Please help with suggestions and advice. Thanks. Karen in GA

Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
See this Apple support Article
http://www.apple.com/support/ipod/five_rs/classic/
You did not by chance bought the Hello Kitty special edition?
Have nice day!

In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
i have been provided with this info
You can find troubleshooting tips, how-to articles, and moderated
> > discussion forums on our support website:
> >
> > www.apple.com/support
> >
> > iPhone: Basic troubleshooting
> > http://support.apple.com/kb/HT1737
> >
I did every step in the link that i have been provided with (thank you), but I’m
still experiencing the same issue. My experience with Apple has been
excellent and this has been the first time I have experienced something
like this with an Apple product. I hope we can find a quick solution.
In order to get the iPhone 5 as soon as it launched (being a major fan of
Apple products!), I purchased my iPhone 5 from the UK through a friend of
mine who lives there.
My question is: can I have the faulty device replaced within Saudi by one
of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
avoid the disruption, complication and expense of sending it back to the
UK.
Could you advise whether this is possible or not, and if not how should I
go about having the device replaced?
Thank you in advance for your cooperation.

Nice try! Take a hike.

Everytime I install iTunes 10.7 and then reboot, I have no sound at all.

Scenario:
I install iTunes 10.7 and everything works great. Until I shut down my computer. When I turn my computer back on, there is no sound at all. No startup chimes from Windows 7, none of my music or video files have any sound. If I open iTunes and start playing a song, there is no sound, but also the song doesn't even start playing.
When this happened the first time, I tried everything I could to try and get sound back. I installed the newest versions of my sound drivers and also for the chipsets on the mb, and even the video card. Everything is up to date already. I tried unplugging all of the cables and plugging them back in. Nothing worked.
So I did a system restore to the only restore point available which was a couple of days before. Voila. Success. Everything is hunky dory. Oops, no iTunes. I'll just go reinstall that. Alrighty, now we're cooking. Time for bed, I'll just shut this down. Next morning...no sound again. I have repeated this process 4 times all weekend, trying to work out why it is happening and on the most recent one, the only thing I reinstalled was iTunes. And then I immediately rebooted. No sound. It would seem that iTunes is the culprit.
On the most recent attempt I made, there is strangely no restore point available that is not corrupted. I no longer have a process with which to reverse it.
Does anyone have any ideas on what I can try in order to resolve this more permenantly?

Best post this in the MacPro forum.
Have fun.
x

No sound at all after 10.4.6 update

Hi, does the 10.4.6 update have a firmware update included ?, because after restart etc no sound at all eminates from my powerbooks built in sound.
No start up chime, system sounds .... nothing [only thing i can see in "sound on the system prefs is a greyed out "headphones" for output device]?
if so anyway of "going back" to a prior "firmware ? or has anybody else had this issue and resolved it ?
TIA secondhead.
PB 17" 1.5 Mac OS X (10.4.6)

heydez and mtd,
If the solution provided in this thread doesn't help, please start a new topic thread, unless you have another solution to help the original poster. The link below gets you to a point where you can click on Post a New Topic:
http://discussions.apple.com/forum.jspa?forumID=752&start=0
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.
Audio works just fine in 10.4.6. Both of you have some contributing factor that is causing it to fail.

No sound at ALL upgrading to iTunes 7

after upgrading to iTunes 7, I can't play ANY of my songs AT ALL in my library, they hang entirely, even the ones I purchased from the iTunes store.
am having the same problem inside the iTunes store trying to listen to 30 second clips of songs, either I get no sound at all, or the song freezes on the first second of playback and makes an annoying "da da da da da da da" sound..
I tried the quicktime fix, that didn't work,
and I also tried the
While in iTunes
Click on File -> Preferences
Select the Playback Tab
Check the box that says Sound Enhancer
Click OK
fix, didn't work either.
any other suggestions? I'm about ready to downgrade back to iTunes 6.4 for windows, this totally *****.. does anyone know how to downgrade back to 6.4? because I may have to do that if I don't get this figured out.
I have tried rebooting, defragmenting, checking the disk for errors, nothing seems to be working
I am using WIndows XP, Sound Blaster Gamer sound card.
sound works fine everywhere else but iTunes 7..
apple, any ideas on this one?

nevermind, figured out a workaround
followed this article
http://docs.info.apple.com/article.html?artnum=93610
well part of it anyway.
I had to set Quicktime audio settings to 24 bit (instead of 16) and then in iTunes, turn the volume slider all the way to the right..
and that fixed the problem so far (shrugs) still a little distorted, but sounds alot better now. iTunes wouldn't play at all in 8 or 16bit modes, I had to turn it up to 24bit, and then playback was all distorted and hissy so I upped the slider all the way and that fixed it.
nothing else affected it, tried disabling sound enhancer that had no effect whatsoever on it, enabling it didn't even make it sound any better, so I just left it off. weird. but I agree iTunes 7 needs some work.

Stereo sound from all speake

Hii, I have a X-Fi Xtreme music and a 5. speaker setup, can someone tell me how can I get stereo sound from all of my speakers? thanks in advance.

Hmmm, I don't have an X-Fi, but to answer your question the first thing someone needs to know is how you have your speakers connected. If, for example, you're running throgh a receiver you need to separately output each channel (using 3.5mm mini plug to RCA cables/converters you would buy at Radio Shack) to the external decoder of your receiver. Of course, in that insance, you would output the DD source stream from the optical out of the card through the optical in of the receiver; stereo playback would be from a 2. signal. I run both configs on mine. Now, if you're running computer speakers already plugged into the correct outputs of the sound card that's a different question, and it's one I can only relate from my experience with the Audigy 2 software.

Why did my video record muted - did not pick up any sound at all?

There was no sound what so ever. I had just restored and synced my iPhone - no back up cause some how during the restore process the only back up (***) was over written. Have no clue with this day and age of the size of hard drives why there can be only one back up file/folder - at least that is what my iTunes stated - one backup even though before the change to the phone I synced and in the top section of iTunes it lead me to believe that it was doing a backup cause that is what it said - backing up/syncing.
Anyway, so after the concert the next day, I made some changes and turned off some sounds like the clicking sound. Then went to view my video from last night and great videos, but no sound, not even muffled sound on ten different videos. I then did a test on my camera and there was sound. Download the videos to my computer just to make sure it was not something stupid and QuickTime video had the audio section of the video graded out like there was no sound at all - which is why I am posting this. I had read that you need certain software/app to record video without sound, but mine did - why???

No, no one has been able to tell my why this even happend. It has not happened again though. But the fact I missed all the sound at the concert was a bit hard to deal with.

My volume button became sound effects, no sound at all

Can anyone help me with my ipad2, my button volume became Sound Effects label, and my iPad has no sound at all.

Hello Skeetercove,
Thanks for using Apple Support Communities.
Please follow the steps below to troubleshoot the issue of having no audio output from your iPad's speakers. Please note that even though the steps state it's for iPhone, the same applies to your iPad.
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Take care,
Alex H.

I am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app. also I can hear the games if I am using earphones

i am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app. also I can hear the games if I am using earphones

You have your mute button on. In Settings check to see if you have Lock Orientation checked or Mute checked on the right hand side. If you have Mute checked, all you need to do is click the mute button above the volume control buttons on the upper right hand side of your iPad. If you have Lock Orientation checked in settings, you double click your home button and the most recent apps will appear. Swipe your finger to the right until the Mute icon appears on the left side. Touch it and you will unmute system sounds.

After recent download of update to iPad, I now have no sound and all my games are slow.What happened?

I recently downloaded the offered update to iPad. Now I have now sound and all my games are slow. Plus, anything with a video while surfing can't be viewed. Does anyone know hat happened and how to fix it?

1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo.

No sound at all after trying to fix Flash Player 9!

Can someone please help me? I couldn't hear sound in YouTube,
so I tried the following (according to someone else's post):
Simply copy the following text to a text file
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Drivers32]
"midimapper"="midimap.dll"
"msacm.imaadpcm"="imaadp32.acm"
"msacm.msadpcm"="msadp32.acm"
"msacm.msg711"="msg711.acm"
"msacm.msgsm610"="msgsm32.acm"
"msacm.trspch"="tssoft32.acm"
"vidc.cvid"="iccvid.dll"
"VIDC.I420"="i420vfw.dll"
"vidc.iv31"="ir32_32.dll"
"vidc.iv32"="ir32_32.dll"
"vidc.iv41"="ir41_32.ax"
"VIDC.IYUV"="iyuv_32.dll"
"vidc.mrle"="msrle32.dll"
"vidc.msvc"="msvidc32.dll"
"VIDC.YVYU"="msyuv.dll"
"wavemapper"="msacm32.drv"
"msacm.msg723"="msg723.acm"
"vidc.M263"="msh263.drv"
"vidc.M261"="msh261.drv"
"msacm.msaudio1"="msaud32.acm"
"msacm.sl_anet"="sl_anet.acm"
"msacm.iac2"="C:\\WINDOWS\\system32\\iac25_32.ax"
"vidc.iv50"="ir50_32.dll"
"wave"="wdmaud.drv"
"midi"="wdmaud.drv"
"mixer"="wdmaud.drv"
"VIDC.WMV3"="wmv9vcm.dll"
"VIDC.VP40"="vp4vfw.dll"
"msacm.voxacm160"="vct3216.acm"
"MSVideo"="vfwwdm32.dll"
"MSVideo8"="VfWWDM32.dll"
"wave1"="wdmaud.drv"
"midi1"="wdmaud.drv"
"mixer1"="wdmaud.drv"
"aux"="wdmaud.drv"
"vidc.VP70"="vp7vfw.dll"
"vidc.X264"="x264vfw.dll"
"VIDC.FPS1"="frapsvid.dll"
"vidc.VP60"="vp6vfw.dll"
"vidc.VP61"="vp6vfw.dll"
"vidc.VP62"="vp6vfw.dll"
"vidc.DIVX"="DivX.dll"
"VIDC.UYVY"="msyuv.dll"
"VIDC.YUY2"="msyuv.dll"
"VIDC.YVU9"="tsbyuv.dll"
"VIDC.DRAW"="DVIDEO.DLL"
"VIDC.YV12"="yv12vfw.dll"
"wave2"="wdmaud.drv"
"midi2"="wdmaud.drv"
"mixer2"="wdmaud.drv"
"aux1"="wdmaud.drv"
"wave3"="wdmaud.drv"
"midi3"="wdmaud.drv"
"mixer3"="wdmaud.drv"
"aux2"="wdmaud.drv"
"VIDC.MSUD"="msulvc05.dll"
"wave4"="wdmaud.drv"
"midi4"="wdmaud.drv"
"mixer4"="wdmaud.drv"
"aux3"="wdmaud.drv"
Save it as missing.reg (Make sure you include the Windows
Regestry Editor Version 5.00 line) and then double click on the
saved file to import it into your regestry and hey presto, you now
get sound of flash content. You may have to reedit your sound
scheme when you have finnished but at least flash content now works
properly.
Now, I can't hear sound at all and my computer refuses to
play CD's, iTunes, Windows Media Player, etc. Under 'sounds and
audio devices', it says that it can't find the location of my audio
codecs, legacy audio drivers, media control devices, legacy video
capture devices, and video codecs. Someone please help!! I'm going
crazy!!!

oh i forgot to say that i have windows xp and my browser is
firefox.

No Sound At All After 1st Burn

I'm working in iDVD 6.0.4 and burn a DVD and everything is fine. The first DVD comes out great. When it asks me if I want to make another copy, I simply put another DVD in and it starts ripping away. However, the second DVD has absolutely no sound at all on any of the videos. The menus though, have sound. ???
Any clues?

Doesn't sound logical. A workaround is to duplicate your good DVD with Roxio Toast or Apple's Disk Utility.
Another approach is to Save As Disk Image from iDVD; make sure this virtual DVD works fine, and then copy the disk image to an actual disk with Disk Utility. Slow down the burn speed in Disk Utility (perhaps to half the speed of your burner, or to 1x or 2x, to reduce burning errors).
John

No sound at all on hp compaq nx8220 notebook

Similar Messages

Maybe you are looking for