No sound between 5.0.3 & 4.0.9

Hi,
i've been searching the forum to get a solution for my problem and i can't find someone having the same.
We've been video chating with my family for almost 3 years without any major trouble (except network failure or this kind of trouble). But since my wife macbook change (going from MBP v1 to MBP 2009) we can have sound with ichat using video conf.
The old portable is a 10.5.8 with ichat 4.0.9.
The new one is a 10.6.5 with ichat 5.0.3.
Ichat config is the same on both computer, but using the new one will always have no sound (but the other peer get sound) using the old one everything works correctly.
Did anyone know what can make this happen (using another mbp early 2010 have the same issue)
Regards

Hi,
Does this thread help ?
http://discussions.apple.com/thread.jspa?threadID=2651683
8:28 PM Friday; November 19, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

Clicking sound between shots

HELP!!
I've captured all of my footage into final cut express (camcorder: Sony HDR HC7) and there's an audio problem. I've noticed that final cut captures video in pieces from camcorders. I've taken these pieces, placed some I/O points on them and put them in the timeline. In the canvas, when I play the entire project, there is this 'click' sound between each clip. No matter where the I/O points are, as soon as one clip ends and the slider continues onto the next clip, this clicking sound happens. I've tried exporting the video and it's still there!! When I preview the clips in the viewer and there is no click. Please help me someone!!
Brendan

Hi(Bonjour)!
What are clips and sequence properties? (select their icon and use contextual menu to get this info).
Did you render audio mixdown?
Michel Boissonneault

Difference in sound between Logic on PPC and Intel (64 Bit)

hi,
I'm using PPC for Logic Pro. Is there any difference in sound between using logic pro on PPC and running it on Intel Macs. I'm not good in tecnical things, but someone told me, Logic would sound better on Intel based Macs, because the system is 64 bit instead of 32 bit on PPC. Is that true? Any experiences?
Thanx,
grooveX

There are no differences!
the "sound quality" is stryctly relted with the Audio equipment.
(the new Intel Xeon processors are faster than PPC... in 2008... obviously... but in 2003/4/5 PPC G5 was much faster than same year 2003 Intel Xeon release
If you work with DAE TDM HD accell in PPC or on Intel the sound will be the same...
obviosly if some update shoot down the compatibilty with PPC side you will cannot use the future upgrades...
if you use a Motu 828 Mk3 the sound will be great... and same as ppc or Intel or Windows and Linux
(but Logic works on Mac... PPC and Intel... is the same... logic is the master of the sound).
Anyway... I think the analog recording studio in the 1970 1990 gives you a super great sound... in some cases the analog recording studio sonds much better that digital studios..
I'm talking about a simple example.. the audio frequency are from 20 to 20.000 HZ... the music quality... (artistically) is not related with the quality of the machine that you use for make it....
I suggest you not follow the mode ... and run to buy the last model .. most often are money thrown to the wind.
if you buy a good new interface.... you are in the rigth way...
but the very important thing is:
MAKE YOUR MUSIC AND DON'T MATTER ABOUT these unnecessary competitions ... is only useful to those who sells computer!
I know people that doing good music with old G4 ...
...music with highest quality ...
is not the machine that makes the music .... Only MEN can obtain a piece of art ... even using dirt!
G

Recording sound between applications.

On my old G4 Mac running Tiger I used a free programme called Soundflower to record audio from any program into a recording app like Audacity or Garageband. Now I am using OS X Yosemite and Soundflower is not compatible. Is there a viable alternative? I looked on the App store and on-line, where there are alternatives, but after downloading them as trials they don't really work.
Soundflower was perfect as a conduit to let me record sounds coming from the computer and I miss not having that ability for the work that I need to do.
Many thanks.

Your subject mentions switching between sound playback applications, but the details in your message only mention a problem occurring when you open/close the laptop screen. Tell us more about the sound application switching you mentioned.
Did you perform a recovery because of this symptom, or did the symptom appear after you performed the recovery? And are the videos that you're watching on DVD media or are you streaming them in a web browser.
Jim

Click sound between gapless tracks

So I got a CD (Demigod from Behemoth to be specific), and I'm trying to rip it with iTunes. The first two songs are supposed to flow together gaplessly/seamlessly. However, instead of it flowing perfectly like when I play the CD, the ripped MP3s (very high quality VBR) have a small "click" sound in between the songs. This has never happened to me on iTunes and I don't know how to fix it. Anyone know what to do?

If you mean checking the "Gapless album" thing in the song info, I've done that, but nothing happened.

Popping sound between cuts in multicam edit

Hello,
I have a multicam project with two cameras. Each camera have 1.5 hours of footage.
I have finished the syncing, cutting, color correction and audio adjustments and the final project is 1.5 hour long.
After I had finished a very tedious and long edit of the sound (by adjusting sound levels from the camera I use sound from) I came back to the angle switcher timeline and found that in between cuts I now hear this "popping" sound. I can hear the cut.
I have spent so many hours on this project at this point and thought I was finally done, but this issue is really noticeable and makes it hard to watch the cuts as I find the popping sound disturbing and it really makes the cuts feel more like "jump cuts".
Before I started to adjust the audio, the cuts were fine in the angle viewer timeline, with no popping sounds in between.
How can I resolve this issue?

@Prebenlm: I've run into this issue before. See the following other discussions for a solution:
https://discussions.apple.com/message/24113622#24113622
https://discussions.apple.com/message/22380018#22380018
Brad

Pop sound between tracks on ipod/iphone but not iTunes

hello,
not sure if this is the correct forum but i have an iphone 3G (and an ipod nano 3G) and like to listen to music without breaks so i delete any spaces of silence in between tracks (with Audacity). my problem is that when music is lined back to back like this (without any silence), there is a pop sound at the beginning of the second track. the editing should be clean because it plays perfectly fine on iTunes.
my question: is it just a matter of my equipment being too old and needing to upgrade? is the processing too slow? would a iphone 5 be able to play just as well as iTunes?
appreciate any comments or assistance in advance.
way

Hi
If I keep them on itunes thet will sync over to the ipod when connected.We didnt want them on the opod because when on shuffle they will play which isnt what we want.any ideas appreciated.
Cheers

No Sound between LG tv and Apple TV

I have tried almost everything! Just purchased AppleTv3, set it up and have perfect picture but no sound. Read many forums and tried many things eg: new hdmi cable, all hdmi ports, different TV And when I did this all works perfectly! Bring it back to my TV no sound. Tested another device, Boxee and all works ok, picture and sound good. Turned off Dolby in both Apple TV and TV, I am using AirVideo and can't find many settings there but looked anyway. Tried all settings ion TV just don't know what else to do!
In short by setting up on another TV I believe I have prove AppleTv and cables are ok, so it's something to do with TV? Does anyone know if there is a comparability problem with LG and AppleTv? Any other help, any help at all would be greatly appreciated!

I have an LG 42PG60UD. I just bought an appletv3 recently and I had exactly the same issue. I live in Australia.
PROBLEM:
Plugged the appletv directly to TV via HDMI. Video worked well but no sound. I don't have a receiver.
TROUBLESHOOTING:
I tried the following:
1. Changed HDMI cable, even bought an Apple HDMI cable: Still no sound
2. Turned off dolby digital: Still no sound
3. Reset Apple TV to factory default: Still no sound
4. Tried AppleTV on my crappy LCD TV in the back room: (Sound & Video) worked perfectly.
This wasn't a solution for me because I wanted the AppleTV to work on my LG TV at the front. So I went to drastic measures and bought a converter for HDMI to RCA (composite). BIG MISTAKE! DO NOT TRY THIS! because quality was terrible, luckily I was able to return it.
SOLUTION:
I was just about to give up, when I thought I'd play with the settings one more time.
Kept everything as default but changed the Screen Resolution via the settings menu
Audio & Video> TV Resolution> Auto (changed to 1080p 50hz)
Looked like it was picking up 1080p 60hz which my TV didn't like. I don't know how it affects the audio but right after changing that setting the sound worked right away.
SOLVED!!!!!!!! Well for me. I hope this fixes your issues too. Might even solve it for issues with your receiver too.

Missing sound between video clips

I have been using PE10 for some while now. One thing that I have noticed is that when you put together clips there is a silent gap on the soundtrack which lasts about 3-4 frames. I use MTS files. When you add another clip to an existing one- if you go through the transition from one clip to the next frame by frame there is a short gap of 3/4 frames with no sound but still the picture. Currently I cut the next clip after I gone though it frame by frame until the first frame when the sound reappears. I them delete that small section and when the remaining clip automatically shifts and joins the previous clip I get an unbroken sound and picture transition. But I am curious as to why PE should introduce this silent gap in the first place. Any ideas?
cheers
bill

Thanks for the link. Is the solution to try using that tsMuxeR program or is there a better way of importing the clips into PE? Once I download the files/folders off the SD card from the camera I format the card ready for new recordings. So the only copies are on the main HD and backup external HD.
When I use PE I use its "Get video from files and folders" option to find the files which are located in the Stream folder.

Overlaping sounds between SWF files

Hi there!
I'm making a serie of animations at my work. Each animation is a different SWF file (with a different background music) and they are all linked by a "Menu".
The music was placed in a single layer of the first scene of each animation by using "Sync: Start > Loop". Although it is only in the first scene, the music keeps playing during the other scenes. That's no problem at all for me!
But when I navigate through the files, each file's background music keeps playing, even though it's not running any more. So, in a certain moment, there are 3 or 4 sounds playing at the same time.
Can anyone help me? Please! =P

Actually, solved this adding "SoundMixer.stopAll()" inside AS code of the button that I've created to change from scene to scene.
But thanks anyways, Ned Murphy!

Moving Drum Sounds Between 2 Ultrabeats

Hey all,
I am sure this is very simple, but I have not been able to figure it out through reading the manual. How does one move an analog synthesized drum sound from one Ultrabeat to another Ultrabeat. I have not been able to figure this out and have spent very large amounts of time recreating the sounds in one ultrabeat that I found in another kit. I would really like to not have to do that. A friend suggested bouncing the sound from one ultrabeat and then loading it in as a sample in the other, which seems like it would work. Any other methods?
Thanks for the help.

Just save the first UB settings as a preset.
In the second UB, use the 'import' function, load up the saved UB, and drag and drop the sounds you wish to use.

Share sound between XP and Archlinux computer [M-AUDIO firewire 410]

Hi,
This might be a strange question but anyway,
I bought a M-AUDIO firewire 410 soundcard about 3-4 yeas ago, i never had a problem with it, and now that i've tasted the sound produced by the device, i can't get rid of it,
I've searched for over one year in order to make it work under linux (tried FreeBOB, wine...), no success in making it work under arch (or unbuntu for that matter), but that's not the point of this topic
The only solution that i've found can be by "sharing" the audio from my main computer (wich is running archlinux) to an auxiliary computer running Windows XP and has the firewire 410 plugged and installed.
My question is, does anyone knows a way to share the audio buffer from my arch computer to my auxiliary computer without loosing too much quality ? Both computers are connected over ethernet at a speed of 1Gbts/sec
I think it might be tricky, tried googleing it, but no success.
I Consider myself as an advanced linux user, so fire away !

s/pdif seems to be for such situations. You could also try running some networked sound daemon, pulseaudio supposedly runs on windows as well, not sure what support phonon has for networked audio.

Annoying clicking sound between slides

We have this on all of our presentations - you can hear it in
this one, for instance:
http://breeze.quinnipiac.edu/p79364952/
I've even gone into audio edit to see if I could make it go
away. I did edit down the volume around the red line that marked
the boundaries between slides. Net result - the clicks got
louder.

Jeff,
Yes, the post-editing worked. I'd tried to do something like
that using volume control (no results), but found silence under
Insert. Silence is golden. Thanks!
Terry

Glitch sound between songs

I have noticed ever since I upgraded to iTunes 7.1.3 that evertime a song ends and the next begins there is a major glitch once the new song starts. It is really annoying and I want my old iTunes back. Has anyone else experienced this problem? HELP!!!

Try changing the volume set for the in iTunes (in the get info option)
btabz

Sound Quality changes between itunes 8.2.1 and itunes 9.1

I am using itunes and a modified Airport Express as my audio source in my Hifi Stereo system.
It is working so well that I have discarded my high end audiophile CD player.
However I found an issue with itunes consistency from version to version in audio quality.
Here is the experience I conducted:
Using:
- a mac mini with Snow Leopard and itunes 8.2.1 and a macbook pro with Snow Leopard and itunes 9.1.
- Identical Wav (full res 16bit 44.1Khz) files local to each mac.
to be completely accurate the music used was:
Ben Webster Meets Oscar Peterson: T01 The Touch Of Your Lips
Diana Krall Live in Paris: T11 A Case of You
- in both cases itunes streams to the Airport Express (same one)
-> The result is that the there is a difference in sound between the two itunes, and I would like to understand what changed or why this difference?
If I were to describe the differences I would say that itunes 8.2.1 delivers a softer sound with more medium than itunes 9.1. Itunes 9.1 would have a brighter sound with less medium than itunes 8.2.1.
(On a side note, not relevant for the problem above, but could interest some people: When I access with my mac with itunes 9.1 the itunes 8.2.1 library on the other mac, the sound quality streamed to the AE is poor compared to either itunes version used with local files. I wonder how apple streams the music from one itunes to the next but that music it altered may be compressed in this case.)
Message was edited by: cdfr

Chris thanks for this answer.
I did check the settings on both Macs/itunes and they are identical. Everything is disabled. The remote volume is also disabled on both.
So the sound quality difference cannot be explained by that.

No sound between 5.0.3 & 4.0.9

Similar Messages

Maybe you are looking for