No sound coming from my ipod

I have a 5th gen. ipod video and it works fine but the only problem is that no sound comes out.....I can't hear anything and it's not my headphones
Toshiba   Windows XP Pro  

Hey Dear,
Have you got the Solution of your problem of Ipod giving no sound. I m having the same problem with my ipod. Everything seems working well in ipod but there is no sound coming out of ipod.
Please guide me if you have got the solution.
Best Regards
Ajay
[email protected]

Similar Messages

  • TS1425 My iPod Classic was working fine all day.  Came home and uploaded to voice memos via iTunes, now there is no sound coming from my iPod.  I've used both headphones and a docking station.  The songs don't even begin, they just skip to the next one. 

    My iPod Classic was working fine all day.  Came home and uploaded 2 files via iTunes, now there is no sound coming from my iPod.  I've tried both headphones and a docking station......nothing.  The songs don't even engage, they skip to the next one.  I've tried rebooting the iPod and still nothing.  Any ideas?
    Kim

    Hi, and welcome to Apple Discussions.
    Have you tried resetting the PMU?
    I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
    Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
    How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
    All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.

  • Why is there no sound coming from my Ipod speaker?

    Why is there no sound coming from my ipod speaker?

    Do headphones work?
    Do you have volume set to max?
    You can try the standard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.
    If you still have the problem then it is likely have a hardware problem and an appointment at the Geniu Bar of an Apple store is in order.

  • There is no sound coming from my ipod!!

    Hi, I am using an itouch 2nd gen. and there is no sound coming from it when i attach my ear phones to it. I have reset the settings, restored it, switched it off many times, still nothing. The earphones are working just fine. Some help would be great!! Thanks!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod. Not clear if you did that type of restore
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. I would say not worth it for a 2G iPod
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Why isn't sound coming from my ipod nano?

    I recieved a brand new 7th generation ipod nano. no matter what I plug into the device to listen to my music (headphones, earbuds, speakers), there is no sound coming from the device. even when I attempt to use only the built- in speakers, i can hear nothing. video works fine.

    First, ipod nano 7th gen does not have a built-in speaker. Second, a brand new nano jack is sometimes ifficult to insert, make sure it is fully inserted or flushed to the ipod body. Cheers!

  • Why do i not have sound coming from my ipod?

    Problem started after the iPod was left in a hot car. At first it played nothing, then it played a few songs flawlessly and finally the sound has completely vanished. I restored factory settings and have done some of the suggested tips from various sites to no avail. All things appear normal as far as operation is concerned.
    I have all the music that was on it and it shows it as playing. I'm stumped. Any help would be greatly appreciated.

    You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Weird sound coming from my ipod, help

    My ipod has just frozen and it's emiting a high-pitched sound (not throught the ear phones, but directly from the device itself). What do i do? I'm going crazy with this sound.

    Run an Apple Hardware Test to see if it picks up any anomalies.
    I would open the MBP and inspect the internal components with emphasis on the fan, as suggested by dalstott.
    Also make certain that you data is backed up.  Though you HDD is not in the upper left hand corner, I don't discount that as a possibility.
    If your purchase date is less than 12 months ago you are still under warranty.  I would then take to Apple and have them perform diagnostics to determine what the problem may be.
    Ciao.

  • There is a very loud, distorted sound coming from my Ipod Nano 7th generation no matter what headphones i use. Any fixes?

    I bought an Ipod Nano 7th generation and out of the box, there was a really loud distorted sound as soon as i pressed play. When i press pause, it stops. If i use a different pair of headphones is does it. So, i exchanged it, and all was good for about three weeks, now even the new one is doing it. The sound is so loud and fuzzy that i cant even hear what the song is supposed to be.

    First, ipod nano 7th gen does not have a built-in speaker. Second, a brand new nano jack is sometimes ifficult to insert, make sure it is fully inserted or flushed to the ipod body. Cheers!

  • Weird sound coming from my ipod

    Hi, Problem 1:My ipod mini makes a grinding noise when connected to my computer.. It only generates this sound while updating.
    Problem 2: I bought an album on Itunes store and when I tried to put it on my ipod it only copies the first three songs..
    Whats wrong???
    // Fredrik
    PC   Windows XP   Ipod mini

    Same thing happened to me. I took the ipod back yesterday to the apple store and I got a new one. However, I'm still having the same problem. I think that something is wrong with the settings or itunes 9 itself. Going to keep checking.

  • There is not sound coming from my ipod.

    I have an ipod classic 30G Video. I have tried resetting, restoring, trying different headphones... nothing working so far.

    If a restore to factory settings did not resolve the issue, it's likely hardware related as a restore would eliminate the possibility of a software error or data corruption.  And you have already ruled out a bad set of headphones. You'll need to either take or send your iPod in for repair either via Apple or a third party service.
    B-rock

  • I put a case on my iPod touch 5 and now there is no sound coming from the speaker.  The head phones work though.  I called Apple Support and the 2 people I spoke with seemed baffled.  Has this happened to anyone and how do I resolve this?

    I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker.  There is sound when we use the headphones.  Is there a mute function that I may have switched on and if so how do I turn it off?
    It was a gift bought by her Godparents in January and I live in the islands so I can't just drive it back to the store to have them look @ it!
    Called Apple Support and spoke to 2 people who seemed baffled and who could only suggest I reset the device.  Who h has not helped.
    HELP!!!!!!!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • My daughters Ipod touch 2nd generation has been freezing today.  We have updated, restored etc and will not play any music as in no sound coming from it. It is almost fully charged and played ok 2 days ago. Any suggestions?

    My Ipod touch 2nd generation has been freezing today.  We have updated, restored etc and now it will not play any music - as in no sound coming from it.  It looks as if it is playing, but no sound comes out. It played ok 2 days ago. Any suggestions?

    So, here is an update to my original question, in case anyone else has this issue. I spoke with a senior adviser at apple, who had me use the "devmgmt.msc" command in the search line of Windows 7; after expanding the USB controllers menu, she had me uninstall/delete the "apple mobile device driver" and then open "control panel" and "uninstall programs." Once the menu of programs was open, she had me highlight the program "apple mobile device controller", then repair it, and restart the computer. This fixed the issue and the iPod synced.
    However, just one day ago, when I plugged in both the iPod, then the iPad (not at the same time), I get the message that "this library has already been synced to another iPod/iPad or other IOS device." It then asked if I wanted to set up as a new device or from restore of previous. That is wher I am right now; I am trying to get the same apple adviser again to discuss the case number. More to follow.

  • Low muffled sound coming from the speakers on IPod Touch

    How can I resolve the low muffled sound coming from speakers on IPod Touch 4th generation? 
    Reset of apps was done and full reset of the IPod was done.

    This is not normal and there is no solution you can administer from home without voiding any warranty you may have... i suggest taking it to your nearest apple store and letting them know, they are very good when it comes to these small problems and will most likely give you another iPod while they fix/throw away your old one... Do a backup first though, so you can load your files back onto the new one.

  • "Thump" sound coming from speakers after upgrading to 10.4.10

    After updating to 10.4.10, there's a not so loud but discernible "thump" sound coming from the speakers every like 5 minutes or so. Very anoying.
    It's very easy to spot it when having external speakers connected to the audio port.
    It just wasn't there before, anyone else having that??

    I can't seem to find any of the posts you mention (??) about the "pop" sound, it has to be the same type of sound is very anoying I had to disconnect my external speakers.
    My volume has been always very low, yes 1-3 clicks are not audible. I would hope they made an option of this lower volume thing just like the ipods have it, where one would decide where to limit (or not of course) the volume.
    I hope they resolve this issue soon.

  • Sound coming from both speakers and headphones at the same time in probook 4440s

    I have a Probook 4440s with windows 8 pro(64 bit) with IDT high definition codec installed. Yesterday when i was playing some songs i noticed that the sound was coming from both headphones and speakers even when my headphones are plugeed in and my lappy was having no such problems a few hours earliers while i was watching a movie. Please help..

    It may be because you have both the internal speakers and headphones enabled at the sametime on your laptop. This might just happen automatically when you plug your headphones in. You need to manage your audio devices on your laptop.
    Go to Control Panel> Hardware and Sounds> Manage Audio Devices> Playback Tab (which should already be selected)    
    In the playback tab there should be a list of all the audio devices you are using on your computer. Right click on the one you don't want to use and click disable. This should stop the sound coming from that audio device. 
    Remember: You will need to enable that audio device if you want to listen to sound through it again. Your internal speakers won't work once you enable them again. This might also be the case with your headphones. You may also have to do this every time your plug in a device or once you restart your computer.
    Another note: Sometimes disabled devices will not show up on the audio device list so once you disable a device it will dissappear. This is an easy fix too. Just right click on an audio device and make sure show disabled devices and show disconnected devices is checked.
    I hope this helps.
    (I was using a computer with Windows XP to explain the instructions but it should be similar with your Windows Operating System. You may however have to play around a little on your computer because it may be slightly different) 

Maybe you are looking for

  • How do I get my playlists back?

    I have an old iPod- one of the originals. 20gig. It's finally full and made me create a new playlist in my iTunes this last time I updated that it will now pull from, since it can't fit all my music in ("xx's iPod Selection"). However, when I'm scrol

  • After starting firefox, I cannot visit any website or see anything but a grey screen where the website should be.

    I opened FireFox to browse the internet and after clicking on FireFox the brower screen split into 2 different screens for a period of about 5 seconds then went back to just 1 screen. After returning back to one screen the browser screen then turned

  • Safari consuming 80% + CPU

    On our PowerBook G4 - we've noticed that Safari seems to be consuming more and more CPU lately. Restarting Safari if it's been running for more than a few days, or even rebooting the PowerBook helped in the past when we had this issue, but not anymor

  • How to change the track order in an album

    I have created a mix album, with the tracks in the order I want them. Somehow, the tracks have now gone out of order in my music library. I can order them however I want in a playlist, but not in the actual library. I have burned a CD from the playli

  • Identifying a Car Plate number

    Hi dear friends, I have a sequence of low quality images that captured by a regular shop camera. I wanna identify license plate of the car in images. I am wondering if it is possible to use the sequences to zoom in the image and identify the license