No sound coming from October 2013 macbook pro

I have the newest macbook pro, and on top of the infamous keyboard/trackpad freezing problem, the sound is starting to not come out now.  Anyone know a solution to this problem? Or should I just give up and return it...? (I have 2 days until the 14 day timeframe for returns)

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Similar Messages

  • Whenever I use the trackpad on my 17" Macbook Pro (2010 model) there is a small, trebly processor sound coming from within the enclosure.

    Whenever I use my trackpad, there is a whirring, trebly sound coming from within the computer itself. It happens also when webpages are loaded or programs are compiled, but not when I use the keyboard or when the computer is in disuse. It has become louder over time, and it is obvious that when the computer senses input from the trackpad and must translate it, the sound is produced. Is there any way to reset the firmware or an option on the Settings menu that could perhaps help? I am concerned that it is a symptom of a larger problem. Thanks.

    The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
    You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

  • Can't boot 2013 MacBook Pro from 10.6.8

    I've been trying to boot my 2013 MacBook Pro (OS 10.8.5) from a clone on of an old drive running 10.6.8 and then from the original 10.6.8 drive itself (on a 2007 MacBook) but with no success. All I get is the startup sound and then the grey screen with the Apple Logo but with no spinning gear. Waited as long as an hour while I ran errands.
    Any ideas?
    btw, I did search around on the net and it seems this should work, and I'm pretty sure I remember doing this a year or so ago with success.

    One more question if you guys don't mind.
    Has this always been the case, i.e. newer Macs with higher number OS's not being able to boot into older OS's? Like I mentioned above, it seems I used to be able to do this a few years ago. If it's not the case then about what year, or OS version, did this practice start?
    Thx again.

  • What cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

    what cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

    Actually you need a Thunderbolt to HDMI adapter. It will carry both audio and video.
    This one will work: Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support

  • Late 2013 Macbook Pro Retina 15' will not boot an external disk from a Mid-2012 MAcbook Pro. What should I do?

    In order to simplify moving all my files from the previous mid-2012 macbook pro 15' when moving to my new late-2013 macbook pro, i superdup-ed the full hard-disk to an external ssd. Unfortunatelly the new mac resuses to boot from this external disk (i get the grey disk with a line over it). The external disk works just fine so if I boot the new mac from its internal SSD I can read/write the external disk without problems.
    Old OS X is 10.9 as is the OS on the new mac.
    What I need to do is to boot the new mac from the external ssd, use the same superduper to copy the external content onto the internal ssd.
    How can I solve this issue?

    Welcome to Apple Support Communities
    If you made a backup of your files with SuperDuper, use Migration Assistant (in /Applications/Utilities) to transfer your files from the external drive > http://pondini.org/OSX/MigrateLion.html It will create a new user account with the transferred files, so you may want to merge both user accounts > https://discussions.apple.com/docs/DOC-5472
    The Late 2013 MacBook Pro uses a special OS X Mavericks version which makes OS X compatible with it, and older OS X versions do not work with it. That's the reason why you cannot start up from the external drive created from the Mid 2012 MacBook Pro

  • I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed.  Is there an adapter available so that I can use it?

    I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed.  Is there an adapter available so that I can use it?

    Welcome to the Apple Support Communities
    Use the MagSafe to MagSafe 2 Converter > http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter?fnode =51 However, note that the MacBook Air doesn't provide enough energy to charge the MacBook Pro with Retina display, so it could not work

  • My sound coming from the internet on my MacBook Air is not working!

    I bought this MacBook Air a month ago is the new one, everything was working well but suddenly the sound coming from the internet stop working.
    My computer sound is working perfectly is just when I want to watch a video or listed a song from youtube talk on skype isnt working at all.
    When I press the volume button i can hear it.
    Can someone tell me what can it be?

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    4. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • Every time I scroll, there's a clicking sound coming from the top left corner of my macbook

    Similar to the clicking sound of my hard drive, every time I scroll, or whenever there is any sort of animation on my screen, there's a similar clicking sound coming from the top left corner on my , around the area where the microphone is. I know the hard drive is at the bottom right corner, so is this a graphics card issue or am I overlooking the issue?

    It is better to take the MBP to the Apple store for evaluation.
    They have the diagnostic tools to make sure that there is no problem with the computer.

  • I have no sound coming from my MacBook which is 3 years old.  I have checked the sound setting under preferences.  Any suggestions beyond going to the Apple store?

    I have no sound coming out of my MacBook and I have checked the sound settings in preferences.  Any other idea?  Thanks.

    can you hear sound using headphones?

  • Is there a way to digitize audio using the headphone input on the 15-inch (late 2013) Macbook Pro with Retina display?

    I'd like to digitize audio from a minidisc player into my 15-inch (late 2013) Macbook Pro with retina display, but can't see a way to change the internal mic input.  I understand that previous MacBooks allowed the headphone jack to double as a mic input, but mine doesn't seem capable of switching.  I've tried using a mini to mini cable, with no luck, and also tried using a headset splitter adapter (3.5 mm 4-pin to 2x3-pin 3.5 mm headset splitter adapter from Amazon) because I read that that would allow me to plug in headphones and input audio.  But in both cases, the only "input" available in my sound preferences is the built-in internal microphone.  Am I missing something?  Is there a way to digitize audio through the headphone jack? 

    Not likely. headphone jacks are usually output only devices unless specifically stated to support input, and even then, it may not be audio input that they support, but merely control input for volume and such.
    You can get a USB audio input instead. i.e:
    http://www.amazon.com/Griffin-Technology-iMic-Audio-Device/dp/B000BVV2IC

  • I put a case on my iPod touch 5 and now there is no sound coming from the speaker.  The head phones work though.  I called Apple Support and the 2 people I spoke with seemed baffled.  Has this happened to anyone and how do I resolve this?

    I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker.  There is sound when we use the headphones.  Is there a mute function that I may have switched on and if so how do I turn it off?
    It was a gift bought by her Godparents in January and I live in the islands so I can't just drive it back to the store to have them look @ it!
    Called Apple Support and spoke to 2 people who seemed baffled and who could only suggest I reset the device.  Who h has not helped.
    HELP!!!!!!!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • There is no sound coming from my ipod!!

    Hi, I am using an itouch 2nd gen. and there is no sound coming from it when i attach my ear phones to it. I have reset the settings, restored it, switched it off many times, still nothing. The earphones are working just fine. Some help would be great!! Thanks!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod. Not clear if you did that type of restore
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. I would say not worth it for a 2G iPod
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Downgrade late 2013 Macbook Pro to Mountain Lion

    Hello,
    I've seen a few threads on this and the consensus seems to be that it can't/shouldn't be done. Some of us are in situations in corporate environments where we can't upgrade so please don't post here to tell me I can't/shouldn't downgrade. I started this thread in the hopes that with enough people working on it we can figure out a way to make it work.
    I can get my 10.8.5 image to boot my late 2013 Macbook Pro by replacing /System/Library/CoreServices/PlatformSupport.plist with a PlatformSupport.plist from the original 10.9 install. It seems stable however I don't get any sound. No input or output devices show up in System Information --> Audio --> devices. I've tried replacing AudioAUUC.kext and AppleHDA.kext with ones from a 10.9 machine but that doesn't help.
    Does anyone have any ideas on how to get the sound working?

    Hello tor.support
    Did you ever get a solutin for this?
    I just spent £1700 on a new MBP to find my audio soundscard does not support Mavericks - normally not such a big deal as I work with computers and thought it would be a simple downgrade to Lion.
    Really dont want to take the machine back to apple, but I cant wait for Zoom (audio manufacturer) to get their software updated. It's been 8 months. I need a system that works.
    Any help would be much appreciated.
    Thank you

  • Sound coming from headphone jack becomes heavily distorted at the slightest movement of the headphone cable.

    I use headphones almost exclusively of my Macbook Pro (Early 2011, way out of warranty) so this has really been annoying me. For about 1-2 weeks now whenever the wire from the headphones I have plugged in to the jack moves, even slightly, the sound coming from the left side disappears almost entirely while the sound from the right side becomes quiet and filled with static. Strangely, it doesn't appear to happen with everything that I'm doing on my computer. For example when playing games the sound seems to work just fine for the most part, but playing music or watching Netflix causes issues whenever the cord moves, which is really annoying.
    To get it to stop, I have to move wiggle the plug around in the jack and slowly move the cord into a place where it will not be affected by movement very easily. I read that some people have been able to get around this by buying an external sound card and using the headphone jack on there, but I'd rather not do that if possible as there isn't really anywhere that I can put it without most likely picking up some interference. Plus I only have two USB ports, so I have to use a powered USB hub thats about 2-3 feet away from my computer for most things. Anyone know if this is a viable solution or how much it would cost to fix at the Apple Store?

    Also, I have tried restarting my computer, messing with the audio settings, and various other settings that I thought might help.

  • Sound coming from both speakers and headphones at the same time in probook 4440s

    I have a Probook 4440s with windows 8 pro(64 bit) with IDT high definition codec installed. Yesterday when i was playing some songs i noticed that the sound was coming from both headphones and speakers even when my headphones are plugeed in and my lappy was having no such problems a few hours earliers while i was watching a movie. Please help..

    It may be because you have both the internal speakers and headphones enabled at the sametime on your laptop. This might just happen automatically when you plug your headphones in. You need to manage your audio devices on your laptop.
    Go to Control Panel> Hardware and Sounds> Manage Audio Devices> Playback Tab (which should already be selected)    
    In the playback tab there should be a list of all the audio devices you are using on your computer. Right click on the one you don't want to use and click disable. This should stop the sound coming from that audio device. 
    Remember: You will need to enable that audio device if you want to listen to sound through it again. Your internal speakers won't work once you enable them again. This might also be the case with your headphones. You may also have to do this every time your plug in a device or once you restart your computer.
    Another note: Sometimes disabled devices will not show up on the audio device list so once you disable a device it will dissappear. This is an easy fix too. Just right click on an audio device and make sure show disabled devices and show disconnected devices is checked.
    I hope this helps.
    (I was using a computer with Windows XP to explain the instructions but it should be similar with your Windows Operating System. You may however have to play around a little on your computer because it may be slightly different) 

Maybe you are looking for