No sound Dxdiag shows Error 19 (User verification of Softwa

Just installed card after a Reformating and it doesnt work, worked perfectly fine before, now dxdiag shows an error msg, need some help

noarch wrote:I tried tweaking my ~/.asoundrc . The original file looked like this...
What do you mean "the original"? Where did that original come from? There is no "original" or default for this file in archlinux. This all reminds me a lot of this previous thread. Are you using an AUR package to "autoconfigure" alsa? Can you post the output of the following command:
uname -a

Similar Messages

Want to show errors to user using struts !!

Hi, I am working on a application which is using struts framework., If any errors / exceptions occur, then they are forwarded to Fail.jsp.
if (!errors.isEmpty()) {
               saveErrors(request, errors);
               // Forward control to the appropriate 'failure' URI (change name as desired)
                    forward = mapping.findForward("fail");I want to show to the user. the error/exception that occured. How can i send these errors to Fail.jsp. Please advice. thanks !!

Then maybe you should go learn Struts before you come to a Java (not to be confused with Struts) forum and post unrelated questions. No go and get before I take a switch to ya! Ya bes simma!

HR t.code showing error

Hii,
T.code (S_PHO_48000513) in reporting tools of HR is showing error
No user group created
i have used t.code SQ02,SQ03.
thanks
Edited by: aks on Dec 6, 2008 5:33 AM

Hi Adamski,
I have been facing the same problem with Ad Hoc query (S_PHO_48000513 ) Your suggestion helped me.
This tcode will work only for standard query area user groups and infosets
Whereas S_PHO_48000510 will work for global query areas and infosets.
Thanks,
Raghu Kolukuluri

Can we set the Option "Show add-in user interface errors" with VBA?

Does anyone know if the advanced Option "Show add-in user interface errors" can be set with VBA in Project Pro 2013?
\Spiro Theopoulos, Montreal, QC (Canada)

Spiro,
Sorry but as far as I know that option is not available through VBA.
John

Validator shows errors affecting SERPs for my site

This is the SERP for my site for the keyword Loan Modification:
I cannot figure out why it is not picking up my title tag and meta from my index.html page, which is what I need the SERPs to pick up
Here is the head section of my Index.html code.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta name="google-site-verification" content="cavkExxxxxxxxxxxxxxxxxxhNw" />
<title>Step by Step Loan Modification eBook. Need Loan Modification Help?</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<meta name="keywords" content="Loan modification, Loan Modification Help" />
<meta name="Keyphrases" content="Loan Modification help, Loan Modification" />
<meta name="y_key" content="eb2xxxxxxxxxx902">
<meta name="msvalidate.01" content="6DxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxD0" />
<link rel="stylesheet" href="images/thump.css" type="text/css" />
</head>
<body>
Here are the validation errors:
Report time: 14:52:23
Severity
File
Description
Line
Error
C:\Users\Greg\Desktop\loan mod site\Website\index.html
The tag: META does not conform to upper/lower case requirements.
9
Error
C:\Users\Greg\Desktop\loan mod site\Website\index.html
The tag:"meta" is not allowed within: "meta" It is only allowed within: head.
10
Error
C:\Users\Greg\Desktop\loan mod site\Website\index.html
The tag:"link" is not allowed within: "meta" It is only allowed within: head.
11
Nesting
C:\Users\Greg\Desktop\loan mod site\Website\index.html
Nesting error, "meta" should be closed before closing "head"
12
Error
C:\Users\Greg\Desktop\loan mod site\Website\index.html
The tag name: "u" Not found in currently active versions.
183
Error
C:\Users\Greg\Desktop\loan mod site\Website\index.html
The tag name: "s" Not found in currently active versions.
316
Error
C:\Users\Greg\Desktop\loan mod site\Website\index.html
The tag:"strong" is not allowed within: "s" It is only allowed within: a, abbr, acronym, address, b, bdo, big, button, caption, cite, code, dd, del, dfn, div, dt, em, fieldset, h1, h2, h3, h4, h5, h6. . ..
316
Error
C:\Users\Greg\Desktop\loan mod site\Website\index.html
The tag name: "s" Not found in currently active versions.
322
Error
C:\Users\Greg\Desktop\loan mod site\Website\index.html
The tag: "a" doesn't have an attribute: "target" in currently active versions.
372
Nesting
C:\Users\Greg\Desktop\loan mod site\Website\index.html
Nesting error, "img" should be closed before closing "a"
374
Message was edited by: greg134 - trying to get HTML code to show to show,

Fix your HTML code.
HTML - http://validator.w3.org/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

When I update my nano ipod I get an error message "User ipod cannot be updated. The disk couldnot be read from or written to." How can I overcome this error message.

In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.

Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling

11i Login Page is showing 'Error on Page' while using IE 7

Hi DBAs,
I am using Oracle 11.5.10.2 with DB 10.2.0.4 (Single Instance). The EBS is on RUP6 and using JDK 1.6.0_12.
I was using Firefox and not getting any issue. I used first time IE-7 (7.0.5x) to access the application. I noticed that Pressing the 'Login' button on Login Page , it was saying in the left bottom of the IE says 'Error on page' and was not navigate to any page or did not perform any action.
I verified all the services and everything was OK. While using Firefox , I was able to navigate the application w/o any issue.
Using IE 7 , I am able to access
http://host.domain:8000/OA_HTML/fndvald.jsp?username=sysadmin&;password=sysadmin
Most of the stuff seems to be working fine while logging in using above URL but the 'GO' buttons are throwing same error in IE 'Error on page'. Rest of the Bottons like 'Edit Navigator' , 'Edit Favorites' are working fine but when on any Page I press the 'Go' button then IE showing Error. It seems to me that when a button need to navigate to next page then IE saying 'Error on page' but when a button have to lunch a new page it is working fine.
All the responsibilities and links are working fine. Application Navigation using Firefox is working absolutely fine.
Seeking your advise and suggestions to resolve the issue.
Thanks
-Samar-

Hi Samar,
You can clear the cache as follows (login as applmgr user, and source the application env file):
$ cd $COMMON_TOP/_pages
$ rm -R *
ML Note: 285218.1 is not helpful as I am on later version of EBS (11.5.10.2 with RUP6 and Developer6i Patchset 19). At Client side I am using Windows XP SP3 with IE 7.0.5.x with JInit 1.3.21 and JRE 1.6.0.12.Did you review the steps under "Recommended MSIE Browser Settings" section?
Can you reproduce the issue with JInitiator? If yes, any errors in the JInitiator console window? Enable debug (you may also enable trace for Sun JRE) and see if any errors are reported there.
Note: 549423.1 - How to enable tracing and logging for Sun JRE (Native Plug-in)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=549423.1
Regards,
Hussein

NOOK Simple Touch says "Error Dialog: user not activated" whenever I try to open e-books?

I have had my Nook Simple Touch for about a year now, and I have been using Adobe Digital Editions without a problem. Now, all of the sudden, Barnes and Noble updated my software and I can't read any of my ADE books!! It just says "Error Dialog: User not activated" every time I click on them. I have looked at many other websites and I have tried plugging my nook in to my computer and reauthorizing it, reauthorizing my computer, deleting the digital editions file and .adobe-digital-editions file, redownloading my books, turning my nook off and on, crying, and screaming. The weird thing is, in all the instructions, it says a pop-up box will come up when I delete the files, but it never does. Is that normal? I always have to do it manually by clicking on the gear. I even made sure I "unhid" all the hidden files. I HAVE DONE EACH OF THESE AT LEAST 5 TIMES AND THEY NEVER WORK!!! HELP ME, PLEASE.
Also, a lot of the websites say to make sure your Barnes and Noble ADE I.D. is the same as the one on your ADE computer I.D.. Is the B&N ADE I.D. different from just the Barnes and Noble ID? Becasue I have been using my sisters email for my computer ADE and my email for the B&N I.D.. Are they supposed to be the same? If so, how come I was able to use it without a problem before?? I tried reauthorizing ADE with my email, because I also have an ADE account with my email, but then it wouldn't let me redownload my books onto the new account. Does this mean I have to change the ADE computer I.D. and wait until my books are available again to read them? Is that the way to fix it? UGH!
Help is much appreciated.
P.S. I have ADE version 2.0

Just to clarify, there are two levels of Authorization -- one for the ADE software and one for the nook. You have to use your Adobe account to authorize both (and they have to be authorized with the same user name). It sounded like your original problem (Kcoline) was with the Nook authorization, and it was the same problem the rest of us were having.
To get your files back, I suggest carefully reading over the "Activation and Authorization" section of the ADE help. It appears that ADE will automatically find your files but note the "Note" in quoted text below...
http://www.adobe.com/products/digitaleditions/help/
"After activation, any books, magazines, or other documents you previously bought with Adobe Acrobat® or Reader® software are migrated to Adobe Digital Editions. This is usually a relatively quick process. Adobe Digital Editions opens each item and reverifies its license to the user. If you don't have DRM-protected items, you don't need to be online during the migration. If you have a large number of items (for example, more than 100), then this process may take a while, but you will see a progress bar indicating the state of the migration as it proceeds.
Note: Items that you previously borrowed from a public library with Adobe Acrobat® or Reader® software are not migrated to Adobe Digital Editions. You need to return the library item and then borrow the item again with Digital Editions."
If it's not finding your files, it may be because they're located in a folder different from the one that ADE is trying to use to find them.
You may also want to check the "Transferring items between computers" section, as this describes where the files should be located, and how to reimport them into your library.
Good luck!

While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

How to show error message on page #NOTIFICATION_MESSAGE#?

Hi,
Is it possible to show error message on a page, where apex substitutes #NOTIFICATION_MESSAGE# at page template, with a javascript call? My requirement is to report error messages which i get from ondemand process, these on-demand processes were called from my javascript code. If any error message is returned by on-demand process, as of now, I'm reporting the error message to user by javascript based alert dialog box, but it would much better if i could keep the error message reporting by my application in a consistent manner. So any suggestion please?
-Krishna

Hi Roel,
Thanks, jumping in for help.
I tried your given code, i found that the page html source doesnt has any element with a name '#messages'. As per my understanding, its the apex engine which checks for any error, if found it shows it by adding an element id '#messages', but here on my requirement its not the apex engine which has detected the error, its my functional logic which wants to report a message. On a normal and error free page condition, we usually dont find '#message' element. I'm curious on how apex inbuilt engine is reporting an error to a page?

EPM 10 NW Report showing error - No Current connection

Hi Team,
We are using EPM NW 10 Version SP 15 Patch 1.NET 4
When we Open the report from offline , The report is showing Error : " Error - No Current Connection"
And also some reports showing Value error , While opening the report in the offline . In this report we used EPM retrieve formula
This issue facing for one user machine
Please suggest whether we need to change settings in the user machine

Hi Andy,
No Offline Mode.
After refresh the EPM report , We saved the report locally in the desktop
The problem is User send this report to another user
So receiving user , When ever he opening that report , Its showing this Value error
He using the Excel 2010 Version
Please suggest

When deploying the webdynpro java application , showing error message

Hi Masters,
when deploying the webdynpro java application , showing error message. Please reply why this problem showing and what is the solution
But Iogin to sdm tool ( remote gui .sh) with same password, which password i am using for deploy the webdynpro java application.here in sdm tool i am able to login. and i restart the sdm , and again trying to deploy the same problem it showing.
URL to deploy : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Aborted: development component 'sales'/'rupa.com'/'LOKAL'/'0.2010.02.13.14.32.39':Caught exception during application deployment from SAP J2EE Engine's deploy API:com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [devsap] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment exception : The deployment of at least one item aborted
Edited by: sujana mullapudi on Feb 13, 2010 2:52 PM

Hi Sujana,
For deploying Web Dynpro for Java application, J2EE_admin correct password must be stored in the scured area of config tool.
Your error show that J2EE_admin information is not correct.
So, Please ask your basis team to update new J2EE_ADMIN password or you can do it in scured area of config tool.
Hope this will helps you.
Thanks
Arun Jaiswal

Am trying to upgrade iPad 2 to 6.1.2 and it shows error like "Unable to verify Update" you are no longer connected to the internet. But am connect to my wi-fi. Can somebody throw some light on this.

Am trying to upgrade iPad 2 to 6.1.2 and it shows error like "Unable to verify Update" you are no longer connected to the internet. But am connect to my wi-fi. Can somebody throw some light on this.
============================================================
Throws error saying
"Unable to Verify Update"
iOS 6.1.2 failed verification because you are no longer connected to the internet
============================================================
Can anybody please respond

Try this and see if it resolves the issue.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Then try again.

Show error message when Install SM7 in step 4 execute Service

Hi All
Show error message when Install SM7 in step 4 execute Service.
Anyone can help me fix the problem pls!
Regards
Kevin
Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
Information for SAPInst:
sid=SMD
number=98
2009.06.08 11:16:59
Task completed with status 0
INFO 2009-06-08 11:17:00.0
Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.250
FSL-02077 File system export (share) saploc does not exist.
INFO 2009-06-08 11:17:00.484
Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.718
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:05.265
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO 2009-06-08 11:17:05.609
Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:05.875
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:08.187
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:10.531
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:12.859
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:15.156
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
WARNING[E] 2009-06-08 11:17:20.281
FSL-01002 Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
INFO 2009-06-08 11:17:20.562
Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:20.781
Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:22.312
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
INFO 2009-06-08 11:17:28.828
Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:29.093
Node C:\WINDOWS\system32 already exists.
INFO 2009-06-08 11:17:31.0
Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:32.390
Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
INFO 2009-06-08 11:17:33.171
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.203
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.250
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.281
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.328
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.375
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.421
Nothing to do. User privileges are an empty string.
INFO[E] 2009-06-08 11:17:35.703
FSL-01027 Account user="hk-is-000818\SAPServicePAS" does not exist.
WARNING[E] 2009-06-08 11:17:40.796
FSL-01002 Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
WARNING[E] 2009-06-08 11:17:40.796
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-06-08 11:17:40.843
FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .

hi Subhash
tkx it work
but I got another error when install afterwards. do u know how can fix , many tkx
Kevin
WARNING 2009-06-09 20:39:02.421
Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-06-09 20:39:02.468
FCO-00011 The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .

When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

No sound Dxdiag shows Error 19 (User verification of Softwa

Similar Messages

Maybe you are looking for