No Sound?!?! Everything appears to be working though???

Hi...
I just had an issue with Logic Pro 9.1.3 and suddenly I have no sound output via Core Audio? I appear to be sending and receiving midi data but for some reason I can't hear it...
Does anyone have any idea of why I would get this?
Thanks in Advance!!

Nevermind... I had it set to the wrong line in/line out setting. Fixed. Whew! :o)

Similar Messages

After an hp update today i have lost all sound. everything appears to be turned on and up? any ideas

After an hp update today i have lost all sound. everything appears to be turned on and up? Any ideas?

Never mind!!! After reading someone elses similar problem I applied their repliers advice and it works! Thanks.

My hotmail email has been hacked into. I've changed my password and hope this fixes the problem. Does this mean my imac software is infected. If so what should I do? Everything appears to be working ok.

My hotmail email account has been hacked into. I've changed my email password and hope this fixes the problem. Will my iMac system software now be infected and if so what should I do about it? Everything appears to be working ok. Is there a free to use software package available on the web, totally secure and reliable, which can scan my iMac for viruses and fix them if any are found.

Unless you have installed anything, you are fine.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
http://www.f-secure.com/weblog/archives/00002300.html
(I have ClamXav set to scan incoming emails, but nothing else.)

On IPad running iOS 7 when I select mail, I get several warnings saying "Caanot Get Mail " can't connect to server However, everything appears to be working fine with mail ?

On iPad when selecting mail getting multiple boxes saying "Cannot Get Mail" cannot connect to server. However, mail appears to be working fine ? Ca not figure why this is happening ?

Hi there wjmcder,
I would recommend removing and re-adding the affected account as an inital troubleshooting step
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
-Griff W.

Ipod 80 gb classis no longer plays music, although everything appears to be working on my screen

HI, my classic Ipod 80gb charges correctly and uploads files etc. However, it no longer outputs any sound, either by headphones or by the port via any type speaker.
Presume something has 'broken' inside.
Loath to throw it away, but would welcome any ideas.
regards
PDLitten

Try:
- A reset. Nothing will be lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next restore from backup va iTunes
- Then restore to factory defaults/new iPod. For how to restore see:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

The auxillary jack on my Itouch does not allow sound to come through with headphones, though it works in a dock as well as external speakers. How can I fix this?

The auxillary jack on my Itouch does not allow sound to come through with headphones, though it works in a dock as well as external speakers. How can I fix this?

You can try the standard fixes of reset, restore from backup and restore to factory defaults to rule out a hsoftware proble. Frequently it is to to a problem with the eadphone jack and the solution is to replace the jack.

HT1338 on my macbook my one button delete botton sound buttons and escape doesnt work i updated everything and it still doesnt work what do i do

on my macbook my one button delete botton sound buttons and escape doesnt work i updated everything and it still doesnt work what do i do

Unless somebody else has a micracle workaround I don't know. Probably get the phone in for repair since it has been living on borrowed time so far and now you absolutely must have a working button.

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

[SOLVED] Firefox: no sound for HTML5, yet Flash works well

Hello.
I have a fresh installation of the arch distro and I am facing a sound problem with firefox. Flash sounds work perfectly, yet I can't make HTML5 to sound. It works in Chromium(perfectly) and Opera(with lags).
gst and gstream plugins are installed
[root@DKOI_LAP ~]# pacman -Qs gst
local/gst-libav 1.4.1-1
Gstreamer libav Plugin
local/gst-plugins-bad 1.4.1-1
GStreamer Multimedia Framework Bad Plugins
local/gst-plugins-base 1.4.1-1
GStreamer Multimedia Framework Base Plugins
local/gst-plugins-base-libs 1.4.1-1
GStreamer Multimedia Framework Base Plugin libraries
local/gst-plugins-good 1.4.1-1
GStreamer Multimedia Framework Good Plugins
local/gst-plugins-ugly 1.4.1-1
GStreamer Multimedia Framework Ugly Plugins
local/gstreamer 1.4.1-1
GStreamer Multimedia Framework
local/gstreamer0.10 0.10.36-4
GStreamer Multimedia Framework
local/gstreamer0.10-bad 0.10.23-8
GStreamer Multimedia Framework Bad Plugin libraries (gst-plugins-bad)
local/gstreamer0.10-bad-plugins 0.10.23-8 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Bad Plugins (gst-plugins-bad)
local/gstreamer0.10-base 0.10.36-3
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.36-3 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-ffmpeg 0.10.13-2 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
local/gstreamer0.10-good 0.10.31-6
GStreamer Multimedia Framework Good plugin libraries
local/gstreamer0.10-good-plugins 0.10.31-6 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Good Plugins (gst-plugins-good)
local/gstreamer0.10-ugly 0.10.19-12
GStreamer Multimedia Framework Ugly plugin libraries
local/gstreamer0.10-ugly-plugins 0.10.19-12 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Ugly Plugins (gst-plugins-ugly)
local/gstreamer0.10-vaapi 0.5.9-1
GStreamer Multimedia Framework VA Plugins
[root@DKOI_LAP ~]# pacman -Qs gstreamer
local/gst-libav 1.4.1-1
Gstreamer libav Plugin
local/gst-plugins-bad 1.4.1-1
GStreamer Multimedia Framework Bad Plugins
local/gst-plugins-base 1.4.1-1
GStreamer Multimedia Framework Base Plugins
local/gst-plugins-base-libs 1.4.1-1
GStreamer Multimedia Framework Base Plugin libraries
local/gst-plugins-good 1.4.1-1
GStreamer Multimedia Framework Good Plugins
local/gst-plugins-ugly 1.4.1-1
GStreamer Multimedia Framework Ugly Plugins
local/gstreamer 1.4.1-1
GStreamer Multimedia Framework
local/gstreamer0.10 0.10.36-4
GStreamer Multimedia Framework
local/gstreamer0.10-bad 0.10.23-8
GStreamer Multimedia Framework Bad Plugin libraries (gst-plugins-bad)
local/gstreamer0.10-bad-plugins 0.10.23-8 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Bad Plugins (gst-plugins-bad)
local/gstreamer0.10-base 0.10.36-3
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.36-3 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-ffmpeg 0.10.13-2 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
local/gstreamer0.10-good 0.10.31-6
GStreamer Multimedia Framework Good plugin libraries
local/gstreamer0.10-good-plugins 0.10.31-6 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Good Plugins (gst-plugins-good)
local/gstreamer0.10-ugly 0.10.19-12
GStreamer Multimedia Framework Ugly plugin libraries
local/gstreamer0.10-ugly-plugins 0.10.19-12 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Ugly Plugins (gst-plugins-ugly)
local/gstreamer0.10-vaapi 0.5.9-1
GStreamer Multimedia Framework VA Plugins
~/.asoundrc and /etc/sasound.conf contain
pcm.pulse {
type hw
card 1
ctl.pulse {
type hw
card 1
pcm.!default {
type hw
card 1
ctl.!default {
type hw
card 1
I would apreciate any ideas how to make HTML5 working in ff as I don't want to change the browser..
Last edited by DKOIman (2014-09-05 12:05:50)

No, I use ALSA, not pulseaudio. Two of that files is a try to fix everything up. I use this configuration because I have
[dkoi@DKOI_LAP ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC663 Analog [ALC663 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC663 Digital [ALC663 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
But HDMI appears not to work (no controls in alsa mixer -S/PDIFs only, no sound via aplay/speaker-test), so I use PCH instead. And everything works but HTML5 sounds in FF

Sound input and output not working

Last night my audio was working fine. I was going to record some stuff in garage band and had a microphone plugged into the input line-in on my macbook. everything was working fine still, turned on the "auto leveling" and then put in my headphones. i then turned on the "monitor" to get the sound to actually come to my headphones. I didnt realize until after it was done but you cant have the auto level and monitor on at the same time. There was a short blast of sound in the headphones and then everything cut out. I couldnt get sound from anything, headphones, built in speakers. No sound going in either.
I restarted my computer and if I remember correctly (maybe i'm imagining it) there was the start up chime. when I started up garageband again I got an error message reading "selected driver not found. error 10202" still no sound input or output. When trying to adjust the volume all I got was the grayed out volume thing with the little cross thingy at the bottom. I checked the sound settings and there was nothing in the input or output sound.
I did some searching around and saw people with similar problems (none with an answer).
This is what I've already tried:
I reset the permissions
I reset the PRAM
I did a hardware check (hold d which restarting) i even did the hour long check and there was no problems.
I tried putting headphones in an out (there was no red light in the headphone jack)
I updated all my software (there was an update to OS X to 10.5.8)
After the update there was no longer a startup chime, and i got no error messages when opening garage band. however there was still no input or output sound. when adjusting the volume on the screen it appears to be normal, but there is still no sound from built in speakers or headphones. I did notice there was a very faint "clicking" noise when i try and adjust the volume... like the speakers are getting power or something... but then nothing comes out. In the sound settings there everything appears to be back to normal.
I know this is long, but I wanted to be thorough in describing my problem. I'm posting this on several boards as well.

I'm having the exact same problem. I did install the newest version of Skype the last time my computer was running (with sound)... so not sure if the new Skype had something to do with it.
Also, when I try to change volume with the keyboard keys, there is a little icon (circle with slash) indicating that the sound has been disabled or not allowed to be changed.
I can't find any answers on any forums.

Captivate 4 can't publish or preview files/sound layers appear black

After re-installing Captivate 4, I was unable to preview or publish files. Additionally, my sound layers appeared as black, empty layers.
I had a difficult time finding a solution, so I wanted to post it here in case somebody else has the same problem.
I was indicating in my searches that I was unable to publish or preview files in C4 and could not find a solution, then I switched the focus of my searches to the audio layers and that's when I found a solution at: http://blogs.adobe.com/captivate/2009/03/adobe_captivate_4_installation.html
Now, I have to say this for anyone who may not be aware. You should always back up your registry anytime you make changes to it and that changes to the registry can cause problems. Having said that, here is the fix I used:.
Adobe Captivate 4 Installation Issues on Microsoft Windows XP
You can use SubInAcl tool from Microsoft to try fixing the permission issues in the Windows Registry.
Close all instances of Adobe Captivate and do the following steps -
1) Download the SubInAcl tool from Microsoft Download Center and install it.
2) Download this zip file
3) Extract the zip file in a temporary folder. You will get two files - restoreRegPermCP4.bat, restoreCP4regentries.bat
4) Copy the restoreRegPermCP4.bat to the folder which has SubInAcl.exe installed. Typically this would be at C:\Program Files\Windows Resource Kits\Tools\.
5) Double click to run the restoreRegPermCP4.bat file.
6) Copy the restoreCP4regentries.bat to the folder in which Captivate 4 is installed. Typically it is at C:\Program Files\Adobe\Adobe Captivate 4
7) Open command prompt and navigate to that folder.
8) Type restoreCP4regentries.bat and press enter.
9) Make sure that all the messages that popup say "DllRegisterServer in 'some dll name' Succeeded"
This should have fixed the registry issues and things should work fine.
I hope this saves someone hours of searching for a solution.

So glad it helped you! I know what you mean about Adobe.
Take Care!
Tannia Elsworth
Senior Instructional Technologist,
Training Services
Products & Support
Amadeus North America, Inc.
T: 1 305 499-6522
F: 1 305 499-6964
[email protected]
Amadeus e-University® Website
Amadeus e-University® Blog
568568568568 <[email protected]>
To
Tannia Elsworth <[email protected]>
cc
bcc
Subject
Captivate 4 can't publish or preview files/sound layers
appear black
568568568568 <[email protected]>
Please respond to :
[email protected]
06/24/2009 04:01 PM
tannia: Thanks for your post. I have been struggling with this issue for
over a year. I have a serious love/hate relationship with Adobe. If it
weren't for folks like you, I'd swear off any and everything they make.

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

Video will not play on BBC site error message this content does not appear to be working .Help

I have bbc news as home page after i updated to firefox 10 if i try to play embedded video i get the eror message [this content does not appear to be working] Help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Problem with tiny white lines appearing in my work

Hi all,
I'm very new to photoshop. I find that while I'm working this white noise (and also other times in the form of a bunch of tiny white lines) appears to cover most of my image. See to the right of the man's head as well as from his neck down on the orange background. It's manageable (though annoying and distracting) while working, but I got to thinking what if the finished file displays the lines as well? To test this, I saved it in a few file formats and I still see the lines. Also, this project, including the starting file, is from the adobe tutorial classroom in a book, if that helps. I'm hoping someone can help me! Thanks!

Thanks for your help.
8 GB 1600 MHz DDR3
OS X 10.9.5
174.08GB free of 250.14GB
I haven't set any scratch discs. Should I set them up at this point?
The book is showing the same exact image without the lines.
The attached screen shots show each layer on its own - some show the white lines, some do not. None of the channels show the white lines. They appear often when working with masks.

HT4527 I transferred my library to a new laptop and everything appeared on the screen. I turned off the old computer and the library disappeared. How can I make it a permanent transfer as my old computer is being scrapped. Thanks

I transferred my library to a new laptop and everything appeared on the screen. I turned off the old computer and the library disappeared. How can I make it a permanent transfer as my old computer is being scrapped. Thanks

Hello Terryfrank,
Congratulations on your new laptop! Also, thank you for the details of the issue you are experiencing with transferring your iTunes Library to your new computer.
I notice that you are coming from the article “iTunes: How to move your music to a new computer,” and it sounds like you might have used the Home Sharing method outlined in that article.
With Home Sharing, you can stream content from another computer, and it sounds like that is how you have it currently set up. The last step is to import the content to your new computer. Use these steps on the new computer (while the old computer is on) to import the music to your new computer’s hard drive:
Once your new computer sees the Home Share from your old computer, click that Home Share on the left side of iTunes on your new computer.
Select the content in the Home Share that you want to transfer to your iTunes library on your new computer, or choose Edit > Select All to choose all of it. Then, click the Import button in the bottom-right corner of iTunes.
Wait for the content to finish transferring.
Additionally, if you want to transfer your playlists, you can export them from the old computer to the new computer:
Transferring playlists
If you want not only your content but also your playlists to exist on your new computer, you will want to transfer a copy of all your playlists from your old computer. To do this, choose File > Library > Export Library on your old computer. Save the XML file that is created to your desktop.
Send the playlists file to yourself as an e-mail attachment, use an external drive, or use file sharing to move the playlists file to your new computer. Once the file is on your new computer, open iTunes and choose File > Library > Import Playlist. The import process will remove any items from the playlists that you didn't share via Home Sharing.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Thank you for using Apple Support Communities.
Best,
Sheila M.

No Sound?!?! Everything appears to be working though???

Similar Messages

Maybe you are looking for