NO Sound; experts please help

I currently have no sound on my HP Spectre XT Ultrabook PC!!! Upon buying the laptop it had Beats audio on the laptop. That stopped working recently, but I still had the normal reduced audio, until that stopped completely soon after. I have tried multiple things to fix this problem, all without success; I tried troubleshooting the problem, I tried updating the audio driver (it said I already had the most current version), I tried uninstalling and reinstalling the driver, I tried updating the BIOS on my computer and NONE of these have worked; I still have no sound! Please help to fix this problem!
The product number is B6V42PA#ABG and it currently has Windows 7 Home Premium installed on it!

Hi
Please try doing a system restore to the date where unit was working fine. In case this does not work last option is to run a recovery please back up your data. This does not work please call HP technical support & get the Speaker replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

BDC - table control - experts please help

Hi experts,
Please help. I am in need of your help.
I am working with BDC and I have a table control in one of the screen. Table control has a check box in the first column. While recording how I entered the data is : I select the check box in a row, enter two values in next two columns of that row and then hit enter then the other columns in that row turn from grey to white (initially these columns are greyed out).
NOw in BDC when I run my session in foreground, I am able to check(select) the check box and enter the values in next two columns and then I have a Enter OKCODE. But when I hit enter it is not able to recognize the row and its unable to turn the greyed out columns in that particular row to white.
Is there a way to specify in my program that I am hitting enter in one particular row.
Please help. Let me know if something is not clear. Very urgent . Pleasee respond. Thanks

Hi Rich,
Thanks for the replies. I will try that. I got one more doubt. While manually creating the recipes using C201, there is a screen Recipe header. When I record this transaction, I see a different screen for the Recipe header. Fro example the screen numbers are like 4210(manual) and 4211(recording).
But my problem is there are two fields which are missing in the screen which I am getting while recording C201. These two fields are present on the screen for manual creation. I need to enter those two fields while I record. But how can I do this.
Please help.

SQL experts please help for a query

I have following table1.
What query can give the result as given below, SQL experts please help on this.
TABLE1
Event DATETIME
in 2/JAN/2010
out 2/JAN/2010
in 13/JAN/2010
out 13/JAN/2010
in 5/JAN/2010
out 5/JAN/2010
RESULT REQUIRED FROM THE SQL QUERY
COL1_IN COL2_OUT
2/JAN/2010 2/JAN/2010
13/JAN/2010 13/JAN/2010
5/JAN/2010 5/JAN/2010

I tried to help, but this puzzles me.
Why is this not returning pre-selected set of rows, why it's doing some merge join cartezian ?
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> select * from table1;
EVENT      DATETIME
in         2/JAN/2010
out        2/JAN/2010
in         13/JAN/2010
out        13/JAN/2010
in         5/JAN/2010
out        5/JAN/2010
6 rows selected.
SQL> explain plan for
2 with a as
(select datetime from table1 where event='in'),
b as
(select datetime from table1 where event='out')
select a.datetime COL1_IN ,b.datetime COL2_OUT from a,b ;
Explained.
SQL> set wrap off
SQL> set linesize 200
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 185132177
| Id | Operation            | Name   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |        |     9 |   288 |     8   (0)| 00:00:01 |
|   1 | MERGE JOIN CARTESIAN|        |     9 |   288 |     8   (0)| 00:00:01 |
|* 2 |   TABLE ACCESS FULL | TABLE1 |     3 |    48 |     3   (0)| 00:00:01 |
|   3 |   BUFFER SORT        |        |     3 |    48 |     5   (0)| 00:00:01 |
|* 4 |    TABLE ACCESS FULL | TABLE1 |     3 |    48 |     2   (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
   2 - filter("EVENT"='in')
   4 - filter("EVENT"='out')
Note
   - dynamic sampling used for this statement
21 rows selected.
SQL> with a as
(select datetime from table1 where event='in'),
b as
(select datetime from table1 where event='out')
select a.datetime COL1_IN ,b.datetime COL2_OUT from a,b ;
COL1_IN         COL2_OUT
2/JAN/2010      2/JAN/2010
2/JAN/2010      13/JAN/2010
2/JAN/2010      5/JAN/2010
13/JAN/2010     2/JAN/2010
13/JAN/2010     13/JAN/2010
13/JAN/2010     5/JAN/2010
5/JAN/2010      2/JAN/2010
5/JAN/2010      13/JAN/2010
5/JAN/2010      5/JAN/2010
9 rows selected.
SQL>

I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!

I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!

The friend who sold it to you needed to clear his Apple ID off the phone before he sold it to you. Of course if it wasn't his phone in the first place then he could not do so. He is your friend but you don't know where he is?
There is nothing that will help you short of getting the password for the Apple ID from your friend. If you cannot obtain that there is no workaround.

Dear experts please help me~

Hello,
i bought a blackberry 9220 after a week it broke.. i usually put it in my pocket. one time i want to check my bbm's but somehow i can't turn it on, i tried charging it but it only shows a battery with a red "X" mark on it.. i tried charging it for hours but no use, i used my friends battery no use, my friend used my battery but it worked.. can someone please help me with my problem ASAP! thank you!

Hi gerardedwards4
Welcome to BlackBerry Support Forums
I am not the Expert Our expert will look into your post , but for the time can you tell what happen when you connect your device to a PC ? Do you hear any sound for anything !
let us know.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Front panel sound.. please help

hi,
My motherboard is MSI 915G Combo. It has CMEDIA AZALIA sound chip which supports multistreaming functionality. The sound output can be taken from frontpanel as well as backpanel audio connectors. But the frontpanel connectors are provided as pins in this motherboard. I got a Mercury KM08 ATX cabinet which has frontpanel ports. But how can I connect the pins?? The cabinet have wires to connect the pins to frontpanel.
There are 7 wires for front panel connectors in cabinet which are
1) Line out FR
2) Line out RR
3) Line out FL
4) Line out RL
5) MIC IN(R)
6) GND
7) MIC Power (L)
In my mobos manual the front pannel connection design is given as,
Pin1 - PORT 1L - Analog port 1-left channel
Pin2 - GND - Ground
Pin3 - PORT 1R - Analog port 1- Right channel
Pin4 - PRESENCE# - Active low signal
Pin5 - PORT 2R - Analog Port 2-Right Channel
Pin6 - SENSE1_RETIRN - jack detection return from front pannel jack1
Pin7 - SENSE_SEND - jack detection sense line
Pin8 - KEY - connector key
Pin9 - PORT 2L - Analog Port2-left channel
Pin10 - SENSE2_RETIRN - jack detection return from front pannel jack2
Please help me to connect the pins to the frontpanel connectors of the cabinet!!!!
also whats are jack sensing pins?? what are they used for??

Jack Sensing is a feature that allows the codec to choose what kind of device (mic, speaker or line-in) you're plugging into the jack by sensing its impedance. It's of no use here for your front panel chassis.
What I would try is to match the PORT 1L/1R with your Line Out FL/FR, and PORT 2L/2R with LineOut RL/RR. There is no MIC connection I guess from the pin names.

Expert please help me!

Hello Experts,
I have added key listener to frame and textfield. If I don't implement KeyEventDispatcher interface,
only event for textfield get notified and if I implement the interface, only event for frame get notified
I want both to work simultaniously. Is it possible? Please help me in this regard.
Here is my code :
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class KeyTest extends JFrame implements KeyEventDispatcher
Container cont = getContentPane();
JTextField jt;
public KeyTest()
cont.setLayout(null);
setBounds(100,100,400,400);
jt = new JTextField();
jt.setBounds(100,100,200,20);
cont.add(jt);
jt.addKeyListener(new KeyAdapter()
public void keyPressed(KeyEvent ke)
System.out.println("Key pressed event of textfield....");
addKeyListener(new KeyAdapter()
public void keyPressed(KeyEvent ke)
System.out.println("Key pressed event of window....");
DefaultKeyboardFocusManager.getCurrentKeyboardFocusManager().addKeyEventDispatcher(this);
public boolean dispatchKeyEvent(KeyEvent e)
processKeyEvent(e);
return true ;
public static void main(String[] args)
KeyTest kt = new KeyTest();
kt.show();
Regards,
Sachin Dare.

My mistake - sorry. Not a cross-post.

Sound problem, please help

Hello, An year or 2 ago, I bought this HP computer, a DX7200 Slim Tower. Due to it's poor performance, I decided to buy another GPU, an Asus R7240. I installed it, and then noticed the sound was not working anymore. To my understanding, it was because the sound card was no longer detected. Fastforward half an year. I just decided to play my games without sound. I then moved a considerable distance and had my computer shipped over in a truck. While in truck, my computer was probably shaken a bit and the graphics card was no longer properly "plugged" in the slot and thus didn't work. I started my computer without knowing this and then noticed that I could the sound was working. I also noticed a severe issue with my FPS on games so I figured that there must be a problem with the graphics card; I therefore opened my case, put the gpu back how it should be. And then I start my computer and notice that the sound is no longer working. tl;dr GPU= No soundNo GPU= sound I really want to fix this now, please help me! This is a screenie of what I see wen I click on "playback devices"

Satellite A105-S4384
Try reinstalling this driver.
Realtek Audio Driver for Windows XP/2000
-Jerry

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/

Is this BUG or Feature of APEX 4.0.1 - Any expert please help to answer

Try this to stimulate the BUG or Feature
- Development -
1. Create Basic Master Detail with tabular form
2. Create a basic LOV and display NULL -> RETURN NULL
- Run -
1. Run the Page click "ADD ROW"
2. Do not enter any data into the tabular
3. Click on Apply Changes
Apex smart enough to know user do not want to add anything very nice....
now... observe this
- Development -
1. Modify the LOV, remove the display NULL, so it will show first value of the LOV
- Run -
1. Run the Page click "ADD ROW"
2. Do not enter any data into the tabular
3. Click on Apply Changes
Apex don't bother to test all validations straight to GIGO and end user see those ORA-.
I have a page that the tabular form has a default value (not LOV but default value) the validation is not working, GIGO....
Any expert please explain is this suppose how Apex work? or do we need to handle those default value.
I try to debug the page with good one and bad one, I think I still have a lot to learn I don't understand the debug message. I guess is something about Branching....
Siere

Hi,
Unfortunately there isn't really much that could be done to work around this issue in 4.0.x. The validation logic treats these new rows as not having been touched by the user, hence they are ignored. But the DML (update/insert) logic thinks the data did change due to that default value, and thus attempts an insert for the new row. There might be a way to trick APEX into doing the right thing with some JavaScript, but I would advice against that, considering that this might break after a future upgrade.
Regards,
Marc

Experts please help me.......

Hi,
i want to create table script in oracle as table name is in other database and i have to create same table with TEMP prefix in table name. So please help me.
For example :
Create table 'Temp_'||table_name as select * from users_table@database
But its not working....
Surender

there are 1083 tables ,So for every table i have write a DDL.So please tell some other logic.
Write a dynmic sql to rename all the tables.
declare
msg varchar2(200);
begin
for s in (select table_name from user_tables order by table_name) loop
msg := 'rename '||s.table_name||' to '||s.table_name||'_TEMP';
-- dbms_output.put_line(msg);
execute immediate (msg);
end loop;
end;
Jaffar

Should i Start with SAP SD...Experts please help

HI,
I have 7+ experience in Channel and Direct sales of IT products.
I work for a company who is fortune 100 and only global distributor of IT products having presence in 6 Continents.
I am Exploring SAP as my career path as i am planning to work overseas and this is not possible having only Sales experience.
Please help as I am in dillemma to look SAP as my career path and invest approx 4-5 lacs in it.
I would also have to take a loan for it.
Please advice.
Thanx

Hi
This thing has been discussed many times. This is not advisable that you take loan for starting your career in SAP until and unless you have hundred percent job surety which is almost impossible. You have to sacrifice your prior non IT related experience. When you start career in SAP you start from scratch. Please check this blog where I have shared some tips and my personal experience as well. There are also many other blogs and threads in Career Center which can go through. This query was supposed to be posted in career forum and now some moderator can move it there. You'll get better responses from there.
Five key factors and basic tips for SAP consultant.
Thank$

Just bought an ipad3. Downloaded a music video desk which works perfectly except there is no sound. Please help

Just bought an ipad3. Downloaded a music video desk which works perfectly except there is no sound. Please help

Contact iTunes and request a redownload.
How to report an issue with Your iTunes Store purchase

Any Java experts,please help this Newbie.

Hey,any one of you knows how do you call a program from a button?
For example,I created a chat program and peer to peer share Program,and I want to join them together.
By clicking on a button on the peer to peer share program,the chat program would open in a new window.
Please Help Me!
Thanks alot.

Hi here is the complete example for you how you can call the other java classes in your main java class. Hope it will give you the idea. If still you have problems do write to me at [email protected]
* SixFrame.java
* Created on July 15, 2003, 10:26 AM
* @author sandeep
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
public class SixFrame extends JFrame implements ActionListener{
JButton btn[] = new JButton[6]; // this no will vary as per you requirements
/** Creates a new instance of SixFrame */
public SixFrame() {
JPanel pan = new JPanel();
for(int i=0;i<btn.length;i++){
btn[i] = new JButton((i+1)+"");
btn.addActionListener(this);
pan.add(btn[i]);
getContentPane().add(pan,BorderLayout.CENTER);
setSize(300,300);
setVisible(true);
/** Invoked when an action occurs.
public void actionPerformed(ActionEvent e) {
String comm = e.getActionCommand();
if(comm.equals("1")){
new FrameOne("One");
}else if(comm.equals("2")){
new FrameTwo("Two");
}else if(comm.equals("3")){
new FrameThree("Three");
}else if(comm.equals("4")){
new FrameFour("Four");
}else if(comm.equals("5")){
new FrameFive("Five");
}else if(comm.equals("6")){
new FrameSix("Six");
public static void main(String args[]){
new SixFrame();
class FrameOne extends JFrame{
FrameOne(String str){
super(str);
setSize(200,200);
setVisible(true);
class FrameTwo extends JFrame{
FrameTwo(String str){
super(str);
setSize(200,200);
setVisible(true);
class FrameThree extends JFrame{
FrameThree(String str){
super(str);
setSize(200,200);
setVisible(true);
class FrameFour extends JFrame{
FrameFour(String str){
super(str);
setSize(200,200);
setVisible(true);
class FrameFive extends JFrame{
FrameFive(String str){
super(str);
setSize(200,200);
setVisible(true);
class FrameSix extends JFrame{
FrameSix(String str){
super(str);
setSize(200,200);
setVisible(true);

Hello Experts Please help me to solve this problem.

Hello Experts,
I am getting a problem while installing the SOLUTION MANAGER 4.0.
in step 17/45 IMPORT ABAP :
the problem is :
ERROR 2008-04-29 03:10:28.110
CJS-30023 Process call '/usr/sap/SLM/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
when i saw R3load.exe.log file it has the following contain :
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SLM/SYS/exe/run/R3load: START OF LOG: 20080428095833
/usr/sap/SLM/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/SLM/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jul 14 2007 02:19:03
/usr/sap/SLM/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SLM/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SLM/SYS/exe/run/R3load: END OF LOG: 20080428095834
Please can any body help me to solve this problem.
waiting for fast response, as my installtion is pending due to this problem.
have a nice day.
Regards,
Shivendra.

Hi,
The following should be verified:
(1) check what DB instances the listener currently is aware of. This can be done with the command 'lsnrctl services'.
(in case you listener does not have the default name LISTENER, then use 'lsnrctl services <listener name>' )
(2) Perhaps there is an issue with the dynamic instance registration, even though the error code is different, you should nevertheless check the points from note #563574.
(3) Verfiy the value of the parameter local_listener (see mentioned note). Since you have changed the listener, the parameter might still be wrong.
In case local_listener is correcly set you should give the command
ALTER SYSTEM REGISTER;
a try.
Best Regards,
Michael

NO Sound; experts please help

Similar Messages

Maybe you are looking for