No sound from apps

*when i'm playing games/open video/music but there's sound for incoming call..please help
*when i plug my iphone to my cpu,it only charging no pop up screen like accesing my ipohne device

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Similar Messages

  • Sound from apps/radio/browsers clicks not working after IOS 8.3 update

    aafter the new update 8.3 my iPad sounds are not working like "app games" "app news" " sound clicks from keyboard and browser, is someone else having problems with sounds, however, the speakers are working, I went to "music" and it is fine, sound from web browsers stream is fine or playback videos are all ok.
    any ideas, I'm lost in this issue, besides the new update made my iPad faster, as well as, the wifi.
    how can I contact apple support??. cant send even an email to this guys for an answer? My service tags are over.
    thanks, community, I hope some one can advice me. also, I did unistall and install all my apps.

    Check that the mute switch (top right side switch above volume control) is pushed up OR
    pull up from the bottom of the screen to bring up control Center & make sure the bell with a line going through it  (mute) is not highlighted. It would only be there if the side switch is set to lock screen rotation.
    Settings->Sounds->check the volume slider is up & that lock sounds & keyboard clicks are enabled.
    If the first two don't work, try a general reset:
    Settings->General->Reset->Reset All Settings.  You won't lose data but will have to log back into your wifi network(s)

  • Bdp-s1500 No sound from Apps apart from Beeps

    I've just installed my BDP-S1500.It works fine for DVDs. My TV is a bit temporamental, so I've had to force the the video to output at 720, but now I'm having problems with the sound. Disks are fine, but some apps are buggy. Example. YouTube gives the clinks and beeps as you move and make selections. However, the clips themselves are silent.Netflix is silent. Amazon has sound.Berlin Phil has sound I have tried numerous HDMI cables into numerous numerous HDMI ports, all with the same results.Any ideas?I've updated the firmware and done factory resets.Any ideas? Thanks.

    Hello Louise,
    Thank you for the details of the issue you are experiencing with sound on your iPad.  I recommend the following steps for an issue like this (the steps refer to an iPhone but are also applicable to the iPad):
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the full article here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I upgraded my iphone 3GS and now it won't play sounds from apps or music. I also cannot sync my music onto my phone.. PLEASE HELP! :(

    Hi Guys
    I recently upgraded my iphone 3GS to the new ioS 5.1. After I did this and synced my phone, it won't let me play any audio from apps, itunes or music. It will allow the phone to ring but that is all. When I use viber I have to press this button and change it from docking to iphone. I take it that the phone thinks I'm permanently on a docking system.
    It also will not sync my music back to my phone. My music is on itunes but it won't let it sync.
    I have restored my phone twice and it still won't work - HELP!! Please???

    Your device is broken.  If you want a device that works better than the one you have now, then you'll either need to bring your phone into Apple for out of warranty exchange ($149), or find a 3rd party repair shop in your area and see what they can do, if anything at all.

  • No sound from apps or ipod

    i have turned the sound off button on and off several times i plugged and unplugged the head phones several times and i still ahve no sound what is going on

    I have what seems to be the same problem as sean2303, in that my ringtone plays through the external speakers (custom ringtone created from an AAC track), and I can make loudspeaker calls, however no other sound comes from the speakers. I occasionally get an error message as if I had docked the iPhone into a device which was not designed for it and I'm asked if I want to activate airplane mode, however this only happens when there is nothing connected to the iPhone. The volume control disappears when the headphones are removed too. I have reset the device multiple times and restored it twice, neither of which seem to work.

  • Sound on iPhone4S disappears at frequent intervals, no ring or sound from Apps

    Sound suddenly decides to cut out such as no alarm going off this morning! Comes back after switching off but then will happen again later. Issue was on 4G so I cahnged to partner's iPhone4S only to find it's happening again! Apple Care had suggested it was speaker issue in 4G but can't be in this 4S as partner never had issue. Any ideas folks? Please? Or am I jinxed!

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue is not resolved by the basic troubleshooting, contact Apple for evaluation and possible replacement.
    FYI, there is not a "4G" model iPhone, there is an iPhone 4 and 4S.

  • No sound from external speakers with music and apps on 3gS

    I'm having sound problems with my 3gs.  I've read quite a few posts about this and have come to a dead end. 
    My problem is that there is no sound from apps of music etc from the external speaker but there is from phone calls.
    This is what I've tried:
    The silent button is off.
    I've put the headphone in and out many times to know avail.  (I don't consider this to be the problem as when the jack is taken out the volume bar dissapears)
    I've blown down the headphone jack.
    I've cleaned out the usb socket with a toothpick
    I've done a restart
    I've done a reset and a full reset with newly downloaded firmware.
    To me it's acting as if it is docked into an external speaker.
    Any other suggestions.
    Darren

    Is the iPhone able to still play ringtones and songs via headphones? If so, your iPhone probably thinks it is connected to a dock. I had this problem and while I don't suggest it, I messed rather vigorously with the dock/cable port at the bottom before the volume reappeared. I hope this helps.

  • LTE - Volume buttons, sound and apps

    I guess this just another one of those issues that comes with having a phone OS installed on a tablet?
    Using the volume buttons when on the home screen automatically adjusts the sound levels for the ringtone instead of the general volume level for like.. everything.. as it would otherwise be intended.
    Also, when turning off volume completely through the shortcut button, sound from apps is still enabled.
    Is there a workaround to this?
    Managed to get the shortcut and volume buttons to work up to my expectations with these 2 apps.
    Volume Sync Links the mute call volume to media volume as well (shortcut). Works for both mute on and off. (Free).
    Volume Sync Pro Links all the different volumes together to go up and down together with ringtone volume (side buttons). Originally designed for mobiles, the UI can be a bit buggy on tablet and might not be able to select which volumes should be synced. Works well with sync all though. (Not free but relatively cheap)
    Solved!
    Go to Solution.

    Found a couple of apps to enable the functionality of the shortcut and volume buttons to be as I expected, so I'm posting links here in case others stumble upon this annoyance.
    Volume Sync will link the mute for call volume with media volume (shortcut). Works both for mute on and off. (FREE)
    Volume Sync Pro will actively sync volume up and down for call sound through the side buttons to all the other volumes. Originally designed for phones, the options do not properly show up on the Z2 tablet, so it might be a bit complicated to choose which volumes to sync, but syncing all is relatively easy. (Not free but relatively cheap)

  • HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

    So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

    In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
    Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
    Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

  • WNo Sound from Internal Microphone - Windows 8.1 Lync App on Lenovo Yoga 13

    After upgrading from Windows 8 to 8.1 the microphone input in Lync ceased to work.
    Lync correctly shows that I have both a webcam and microphone in my laptop, and both are turned on under Permissions.
    I have updated all my drivers to latest available on Lenovo's website.
    When I examine the microphone driver in the Device Manager, it shows that audio is being picked up and can properly route audio through to the laptops internal speakers.
    The only app that appears to have a problem with the internal microphone is Lync.  For example, the YouCam application properly captures both audio and video.
    Any suggestions?
    Windows 8.1 64bit
    Lync (from app store)
    Lenovo Yoga 13
    The YouCam app can properly capture audio and video.
    The YouCam app can properly capture audio and video.

    Hi,
    Are you able to make call using this Internal Microphone? I would like to confirm if the call can be established and there is no sound from Microphone.
    Please check the Audio and Video Device in Lync client option. Please also select "Before I join meetings, ask me which audio device I want to use" in Phones option so that you can choose the correct audio device for call.
    Kent Huang
    TechNet Community Support

  • Garageband is not picking sound from builtin mic (rMBP). I recorded some tracks, now it is not working. All other apps can use the mic. Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.

    Garageband is not picking sound from builtin mic (rMBP).
    I recorded some tracks, now it is not working. I have checked GB Preferences, Audio/MIDI > Audio Input > Built In Microphone.
    All other apps can use the mic. Dictation, Skype etc. can use the mic!
    Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.
    Can any one help me, Please!
    Many thanks!

    I have foud the solution - rather stupid. The system setting for audio input was at 70%, increasing it to 100% solves the problem!

  • I have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?

    i have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?reco

    You may get a better response in this community:
    https://discussions.apple.com/community/app_store/garageband_for_ios

  • I am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app.  also I can hear the games if I am using earphones

    i am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app.  also I can hear the games if I am using earphones

    You have your mute button on.  In Settings check to see if you have Lock Orientation checked or Mute checked on the right hand side.  If you have Mute checked, all you need to do is click the mute button above the volume control buttons on the upper right hand side of your iPad.  If you have Lock Orientation checked in settings, you double click your home button and the most recent apps will appear.  Swipe your finger to the right until the Mute icon appears on the left side.  Touch it and you will unmute system sounds.

  • I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?

    I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?

    you might need codecs on you pc. i find vlc player and codecs is perfect for music and videos.

  • HT2178 No sound from Doom3 after installed from the App store onto my intel iMac

    No sound from Doom3 after installed from the App store onto my intel iMac 10.7.3  Any solutions?

    Just just launch the Mac App Store, select the "Purchased" tab and download MainStage or any other application you already bought.

Maybe you are looking for

  • How to delete backorder lines?

    hi experts, i cancelled one sales order, this salesorder has 3 lines and i cancelled line by line and it came up at the end "order status = close" "lines status =cancelled"  but one line stays in backorder that should not be stay there coz it has bee

  • T500 - Windows Update no longer works after using factory recovery disks.

    I'm running  Windows 7 32bit.  I needed to restore my T-500 hard drive because of a fatal windows registry error caused by a 3rd party registry cleaner/tuner software... Windows 7 was DOA .    I used the factory recovery disks I created after I first

  • Wont sync because of not enough space but it also says i have free space at the bottom

    I synced my entire itunes at first. Then  I got some more music off an old ipod and wanted to put it on knowing I have to select specific artist or albums instead of the whole collection. I have around 3000 songs on the ipod now. Its not letting me s

  • NEED STANDARD INFOOBJECTS FOR STANDARD R3 FIELDS?

    HI ALL, RESBU BRESWK BRTWR_R BSAKZ EGLKZ EMNFR KTWRT KZKPF KZKPO MEPRF MPROF NETWR_R PRDAT REVNO STAKO STAPO The above are R3 Fields, i have taken it from datasource (2LIS_02_ITM), I Just want to know the standard infoobjects used for the above said

  • Table in vertical direction?

    Hi All, I'd like to know if we can display a table in vertical direction: the table is rotated 90 degree anticlockwise, so the visual effect is the the rows becomes columns? Example:             Item1     Item2 ... Header1       1         -2 Header2