No sound from audio jack and screen doesn't dim, using BootCamp 3.1 in W7

I'm using BootCamp 3.1 in Windows 7 on a MacBook Pro (13-inch, Mid 2009)
When I plug in headphones I get no output sound; however, I do get sound from the main speakers (regardless of the headphones being connected or not). Side note, there is no red light coming from the audio jack.
Another problem that I'm having: when I try to dim the display, using either F1 or F2, or from the BootCamp Control Panel in the Dim tab, it doesn't dim.
I've saw in Apple's Support Download section that there is "Boot Camp Update for MacBook Pro (13-inch, Mid 2010) (Windows 64 bit)", but as you can see it's "Mid 2010" and not "Mid 2009".
However, for the sake of exhausting everything I can think of before posting here, I tried to download and install it. Only to get an error that states "The patch upgrade cannot be installed by the Windows Installer service because the program to be updated may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be updated exists on your computer and that you have the correct update patch."
Any suggestions?

the G5 is not en intel based cpu so people here may not know too much about the hardware setup but
people here
https://discussions.apple.com/community/desktop_computers/imac_powerpc
would own the same type of computer as you do any that may result in them having more insight into what could be the issue

Similar Messages

  • No sound from audio jack and screen doesn't dim, using BootCamp 3.1 in Win7

    I'm using BootCamp 3.1 in Windows 7 on a MacBook Pro (13-inch, Mid 2009)
    When I plug in headphones I get no output sound; however, I do get sound from the main speakers (regardless of the headphones being connected or not). Side note, there is no red light coming from the audio jack.
    Another problem that I'm having: when I try to dim the display, using either F1 or F2, or from the BootCamp Control Panel in the Dim tab, it doesn't dim.
    I've saw in Apple's Support Download section that there is "Boot Camp Update for MacBook Pro (13-inch, Mid 2010) (Windows 64 bit)", but as you can see it's "Mid 2010" and not "Mid 2009".
    However, for the sake of exhausting everything I can think of before posting here, I tried to download and install it. Only to get an error that states "The patch upgrade cannot be installed by the Windows Installer service because the program to be updated may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be updated exists on your computer and that you have the correct update patch."
    Any suggestions?

    the G5 is not en intel based cpu so people here may not know too much about the hardware setup but
    people here
    https://discussions.apple.com/community/desktop_computers/imac_powerpc
    would own the same type of computer as you do any that may result in them having more insight into what could be the issue

  • No sound from both jack and speakers of my hp pavilion laptop

    I'm not getting any sound from the speakers or headphones on my HP 2000 Note Book PC. When I try to test the speakers I get an error message saying, "The device is being used by other application.Please close any devices that are playing audio to this device and then try again".

    Hi,
    Can you post back with the following details.
      The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
      The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • M7690N Installed a Galaxy GT520 now no sound from audio jacks

    I have a HP M7690N that i just installed a Galaxy GT520 video card in and now i cant get any audio from any of my audio jacks. Though i do get audio from the HDMI. My system is a M7690N running Windows 7 and windows XP (dual boot). also the Realtek audo card dose not show up in device manager on XP or win 7.

    Hi,
    Please close this, use other post:
       http://h30434.www3.hp.com/t5/forums/replypage/board-id/Monitor/message-id/21590
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Record Sound From a Microphone and convert it text file using jave applicat

    Hi, I want source code for recording sound from a microphone which is connected to a sound card fixed in my machine,and convert that sound file to a text file , so that i can compare that text later with the command which i have stored already in my computer.How to do this in Java ? If any one could help me in solving this problem, it would be very helpful for me !

    Have you looked into the JSAPI?
    http://www.esus.com/docs/GetQuestionPage.jsp?uid=1471

  • Bad sound from audio jack

    please help - i just got the mini 1000 vivienne tam, which i love, but the audio output from the headphone jack is terrible. it sounds like i'm listening to a cassette in my 1983 boombox. i'm running windows xp. i've seen solutions for those on linux, but nothing helpful for xp. please help! i have a great bose wave radio that's going to poor use as i listen to all music from my notebook.
    hp person, random person, anyone, please save me!
    (and please explain in very very simple nontechy terms)
    thank you!

    omg, it worked it worked! thank you so much. i spent an hour online with tech support yesterday and didn't get it fixed. but this worked! may blessings rain down upon your house.

  • HP pavilion g6 no sound from audio jack or usb

    Hi, I normally use my laptop with some headphones on the headphone jack, but just a few minutes ago my headphone jack stopped working and all the sound came out of the internal speakers. When I connected my USB headset on it didnt work either and all the sound stil comes from the speakers. The troubeshooter couldnt find any problems. Plz help

    Your iPod will require a replacement logic board.  A chip necessary for audio production has gone faulty and since it's integrated to your mainboard, it will require replacement.  Oftentimes you can squeeze hard along the bottom front edges of the device and failtly get partial sound.  This is another key sign of this damage.

  • U350 Ideapad crappy sound from audio jack

    Hi, 
    Hopefully someone can help me. 
    I just bougth a U350 Ideapad and everythig works perfect, but when I plug my headphones I can hear everthing but it sounds terribly, like an eco. If I plug the headphones slowly but not all the way in I can hear the sound perfect but they dont stay there and If I press all the way down the sound is terrible.
    What can I do? 
    Thanks 
    Gabriel

    Hi Jimmys_51,
    Take a look at this document and let me know if the troubleshooting steps help resolve your issue.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I have downloaded an audio talk from Audio Audible, and have authorised my computer to for my Audible Account, yet I still can't get the computer to play the download.

    I have downloaded an audio talk from Audio Audible, and have authorised my computer to for my Audible Account, yet I still can't get the computer to play the download.

    The apps I currently have are for the i phone and i pad but i would like to see this on this computer
    On the Mac Air launch iTunes. Then connect either the iPad or iPhone.
    Select the iPad or iPhone under Devices left side of the iTunes window in the source list.
    Then select Apps from the menu on the right.
    If you don't see the apps listed there, from your iTunes menu bar (top of your screen), click Store > Authorize This Computer.
    See if that makes a difference...

  • When I plug my headphones in the my laptop I still have sound from my speakers and headphones

    Hello, I'm having trouble with the sound on
    my laptop and it's only just started to happen.
    When I plug my headphones in the my laptop my speakers don't get muted, So I
    have sound from my speakers and headphones at the same time.
    I've reinstalled the drivers and this didn't work, So I'll hoping you can help me.
    HP Pavilion g6 Notebook PC, Product number A8M62EA Windows 7 64-bit

    Here's the trick (and it's been verified on 3 other Win 7 systems):
    1) R click on your speaker icon, select 'Recording Devices' (if you have the sounds dialog up, it's the 2nd tab 'Recording')
    2) R click in the white space, be sure that BOTH "show disabled devices" AND "show disconnected devices" are checked.
    3) **Now this step is going to take a little bit of thought for each computer being used: on my laptop (HP Elitebook) I get a device "Stereo Mix", ENABLE this device.
    4) Click on Properties, go to the tab 'Listen'
    5) Check the box "Listen to this device", also change the drop-down box below "Playback through this device" to be your second audio device
    -- To verify that you've done this correctly, go back to the Sound dialog tab Playback, you should now see both of your audio devices showing the little green graphs moving.
    Here are the specific settings that I have on my laptop, maybe this will help with your settings:
    Speakers- GN9350 (Default Communications Device)
    Speakers- SoundMAX Integrated Digital HD Audio (Default Device)
    Stereo Mix- 'Listen' feature points this  device to my GN9350 headset.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • I cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.

    i cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.

    Did you already reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can cure some glitches.
    If this does not help, try to set it up as new device, explained here:
    How to back up your data and set up as a new device

  • Hello Mac heads.! I just downloaded Onyx for tiger.  All went well.  But I try to launch onyx from my applications and it doesn't offer checking the S.M.A.R.T. status so I can check my disk.  Everything else appears.  Uninstall only, forums, website etc.

    Hello Mac heads.! I just downloaded Onyx for tiger.  All went well.  But I try to launch onyx from my applications and it doesn't offer checking the S.M.A.R.T. status so I can check my disk.  Everything else appears.  Uninstall only, forums, website etc.

    I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

  • My I phone 4 fall from my hand and screen broke. Can I replace my I phone 4 from Apple Store ? How much it will cost in Dubai ? Please help with information.

    My I phone 4 fall from my hand and screen broke. Can I replace my I phone 4 from Apple Store ? How much it will cost in Dubai ? Please help me with the information.

    I'm assuming you can..now I don't know the prices for your area, you'll have to check around, I just did a quick web search and I'm pulling all sorts of prices up, I'd look into a repair facility near you and see what they can do for you :-) shouldn't be too expensive though! Good luck!

  • AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

    AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

    I had a bright house cable modem that also had built-in wi-fi.
    Don't mean to be picky here, but if the "modem" had built in Wi-Fi, it was not a modem. It was a modem/router, also known as a gateway type of device.
    A device like this combines the functions of a separate modem and separate router in one package. Turning off the wireless on a device like this does not make a it modem.....it is still a modem/router or gateway with the WiFi turned off.
    I think that if I have them replace the current "complicated" modem with a "simple" one I should be able to get the guest network up and running.
    That would be correct. Hopefully, they offer this type of option for their customers.

  • Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

    Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

    Hi Liz,
    Sorry to hear you are having a similar problem.  Last night I went to the tool bar at the top of iphoto, clicked on "File",  then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups  opened the iphoto pages in the Time Machine.  I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked  "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1).  I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do. 
    The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu,  when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.  
    I am now a happy camper. 
    I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto,  that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"? 
    Good luck Liz,  if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
    Karen

Maybe you are looking for

  • Adobe flash cs6 fatal error

    i installed a demo version of adobe flash cs6 and after 1day , when i try to save my stuff it gives me a fatal error , can anybody give me a soluction please, THANKS IN ADVANCE

  • New "throttled" ICE pricing model proposal to Adobe

    First off I agree that the ICE service should not be free, but for it to be worth while from a business standpoint, and at $20 per month paid to Adobe, the "web shop" would need to charge at least $10 per month to each client to use the service. It's

  • Using dimension properties in LOOKUP

    Hi, I'm trying to use dimension properties in a LOOKUP, but when I execute the script the log tells me that COMPANY, SALESORG, PRODUCT and TRANSCURRENCY is not defined and therefore create a lookup on all members. THe usage of properties in LOOKUP is

  • Just got new ram and new errors

    I picked up 2 F2-6400CL6D-8GBMQ G.SKILL 8GB (2 x 4GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL6D-8GBMQ - N- I'm running windows 7 32 bit intel core2duo 3.00GHZ geforce gtx 275 10GB ram. I upgraded and now

  • Passing request to htmldb_goSubmit

    I have an onLoad java script as onUnload:"javascript:htmldb_goSubmit(:REQUEST);" in my page level attributes(Page HTML body attribute). The request could be a parent tab,a standard tab or a breadcrumb menu item. If I press Cancel on the htmldb_goSubm