No sound from built in speakers on iPhone 4

I had this problem once before and am not sure how I fixed it.  When I unplugged my earphones I no longer get sound via the built iin speakers.

Unfortunately I didn't. I took the time to make an appointment with the Genius Bar and was told (by an unusually smug tech) to go home, back up my data, then restart the phone with the power button and center button down.  If that didn't work to then Resotre as new through iTunes.  I had already done all that so it seems I will eventually have to get a new phone. I asked said agent before I jump and pay for a new (4S) phone if there was the iPhone 5 set tp debit.  He answered unequivacally that there wasn't.  Several days later there was a news story hinting that there was.  With all that said I will live with my phone that sometimes rings and sometimes doesn't for as long as I can and wait to see what story is correct. 
If you haven't tried any of the above you should (it worked once for me several months ago).  Good luck.

Similar Messages

  • No sound from built in speakers but headphones ok, pavilion dv6

    HI all,
    Out of a sudden , after watching a youtube video, my speakers and headphone gave  noise when I was RE playing the video that I watched seconds ago.
    I restarted my lap, and then didn't hear a sound at all
    checked my drivers and updated them
    the headphone is working fine. but when I unplug it I hear no sound from my built in speakers. though the drivers are working fine.
    took my lap for maintenance to get it cleaned up and checked, they told me the speakers are connected and the wires are all fine! but the problem still exists.
    they wanted me to leave it with them to be checked ... but I just didn't trust them since they suggested the sound card is damaged! if it was dagamed I don't think I'll be getting any sounds ! right ?
    please, can any one tell me what could be the problem ? and how to solve it ?
    Pavilion Dv6 3120
    running windows 8.1 for the past year

    Hi Chaand,
    You can try installing this IDT High-Definition Audio driver, it is not for your model but it is a Windows 8.1 driver. There are no Windows 8.1 driver for your model. If installing that driver doesn't work then it is a most likely a hardware issue with the speakers and you should have either a local technician take a look at it or send it to HP for repairs. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • No sound from built in speakers only headphone jack works

    Not sure what happened but I only get sounds with headphones there is no sound from the speakers from my laptop envy15

    Hi
    Please find the link given below might help you to fix your issue.
    Sound Issue
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • DM4-1160US - No Sound From Built-In Speakers!

    Hello:
    Last week I suddenly stopped hearing sound from the dm4-1160us (Windows 7 Home Premium 64-bit)  laptop.  As a technician myself for over 25 years, I have uninstalled, reinstalled, checked Device Manager for possible error notations, updated the BIOS to the model's latest version, tried the Microsoft so-called "fix" for the problem, and shut down and rebooted dozens of times, etc.  Still, nothing!  If anyone knows of a possible solution for this issue, I would greatly appreciated any suggestions or (dare I say) solution.  Thanks.
    This question was solved.
    View Solution.

    You can isolate this issue to a hardware or software fault by running a live distro of Ubuntu linix. See step number 2 to install it to a USB memory stick.
    If the device is not recognized by Ubuntu during its config operations that the probem is likely to be with the notebook's system board.
    Is your notebook still within the standard one year warranty period?
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Pavilion dv5-2077cl - no sound from built in speakers

    I ran updates. Updated driver. Ran HP troubleshooting and also checked online. Still nothing. Any suggestions?

    Hi Chaand,
    You can try installing this IDT High-Definition Audio driver, it is not for your model but it is a Windows 8.1 driver. There are no Windows 8.1 driver for your model. If installing that driver doesn't work then it is a most likely a hardware issue with the speakers and you should have either a local technician take a look at it or send it to HP for repairs. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Im a DJ and Im trying to live broadcast from my iphone to a website I cant figure out how to get the sound from my mixer into the iphone please help...

    Cant figure out how to get sound from my mixer to my iphone to live broadcast

    Found this https://www.kvconnection.com/ProductDetails.asp?ProductCode=KM-IPHONE-43F35F-A22
    Is it any good for you.

  • TS1574 no audio from built-in speakers and red light visible through the headphone port

    My 15" late 2006 MBP has just stopped producing sound from the internal speakers and for the first time there is a red light visible inside the headpbone output port. Apple support says contact support but since I'm a long time out of even my extended warranty I wondered if anyone had a fix-it suggestion I might try myself?

    Try to plug the headphone into and out of the headphone socket couple of times
    to flip the microswitch in the socket.
    Red light visible means sound output is stuck in digital mode.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Procedure is same for 10.6
    Reset SMC.http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If these steps do not help, repair Apple Store is needed.

  • No audio from built-out speakers on my Mac book pro

    no audio from built-out speakers on my Macbook pro, but with external headphones or speakers it does work. I see a red light inside the audio line-out port when you disconnect devices. What can I do?

    The internal switch is stuck.
    Insert the earphone jack several times.
    Blow real hard into the audio output ort.
    Take a toothpick and jiggle inside the audio output port.
    If no success, visit the Apple store genius bar.
    Ciao.

  • Upgraded to Windows 7 and no sound from built-in monitor speakers

    I've upgraded my HP Pavilion Media Center a1450n Desktop PC to Windows 7 successfully with the exception of sound. My speakers are built-in to my HP vs17e 17 inch LCD Monitor and Windows 7 cannot detect my built in speakers, I have downloaded most every sound driver out there currently is there something I'm missing? Can somebody help draw sound from my built-in monitor speakers on OS Windows 7?
    Thank you.
    This question was solved.
    View Solution.

    Downloading the realtek drivers on the website provided fixed the problem thank you!

  • Cq50-142us windows 7 64 bit headphones work but no sound from built in Altec-Lansing speakers

    I recently installed Windows 7 64 bit on my CQ50-142US after the hard disk died.  I've installed all the drivers that apply, and in particular the Conexant driver for the built-in audio parts.  The system has built-in Altec-Lansing speakers.
    I get no sound from the built in speakers, but if I plug in stereo headphones to the front-panel headphone jack, they work and they produce stereo sound no problem.
    I can't see any way to test the speakers.  If the system has any built-in diagnostic capability, I can't find it. 
    A Google search suggests I'm not the only person with similar problems.
    Suggestions?

    You can isolate this issue to a hardware or software fault by running a live distro of Ubuntu linix. See step number 2 to install it to a USB memory stick.
    If the device is not recognized by Ubuntu during its config operations that the probem is likely to be with the notebook's system board.
    Is your notebook still within the standard one year warranty period?
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I currently have no sound from my internal speakers. When I go to system preferences, internal speakers is not an option - there is nothing there. What should I do to fix this?

    I don't know what to do - I don't have any sound coming from my internal speakers, and with headphones there is still no sound coming out. When I go into system preferences under sound, there is nothing there - it says 'no output devices'. What should I do?

    MacBook Pro model?
    Hard to suggest a solution without knowing the model.
    The following tips may not apply to latest MacBook Pro 13 inch model.
    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • HP Pavillion dv5-1235dx laptop - No audio from built in speakers of recently purchased laptop

    I purchased my laptop (HP Pavillion dv5-1235dx laptop) from best buy on Saturday, May 9th, less then a week ago. Yesterday the audio/sound stopped working completely - from the built-in speakers.  I can hear ALL sound just fine from headphones.  Only the internal speakers aren't funcioning.  I did online troubleshooting, and also chatted with a technician, and I still have the same problem.  I ran all updates, the status on the sound driver says it is funcioning properly.  Even the little fluctuating green bars (on the volume control) SHOW that sound is coming out, but still unless I have headphones in, no sound comes out.  The HP monitering software DID pop up and say there were critical errors and the computer needed to be updated yesterday, but I don't know if that was related because once I did all the updates, the audio still had the same problem.  Please help me out.
    Thanks,
    Kalli

    If it is less then a week, just return it to bestbuy. You may have a loose connection in speaker jack.
    Have you try to use recovery DVD? try to install it to the factory setting.
    If it does not work, definitely you have a hardware problem.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • No Sound from iMessage or mail when iPhone 5 with iOS7 looked

    I remember with iOS 6 that when the iPhone 4s was locked I could hear my sound from iMessage and Email.
    With the iPhone 5 and iOS 7 under Options/ Don't disturb there are two settings.
    Mute : 1. Never sound or 2. Only when locked.
    Well, does this mean that I must unlook my iPhone only to be able to hear iMessage sound? Or is there a way to lock the device and be noticed by sound when I receive iMessagees or everything else when sound is available ?
    Thank you for your effort!

    I have the same problem, games and music etc all speakers work, but during the tests/calibration I get no sound from rear speakers, center or the sub...... help please! (from the firewire port out the plugs all go as follows: yellow, black, green)

  • Ipad 2 has no sound from built-in speaker after one day.

    I received by ipad 2 yesterday and I had sound out from the built-in speaker when using facetime and
    youtube.
    When I turned on my ipad2 today, there are no sound from the built-in speaker. I checked the switch in
    "settings" and it is set to "lock rotation" instead of "mute". So I am pretty sure my ipad2 is not
    muted in the first place, using the volume locker and the volume icon shows "headphones" but
    I do not have the headphones plugged in. However I got sound when I plugged in the headphones,
    unplugged them and I got no sound from the built-in speakers again.
    I have a 32G wifi+3G (The 3G is not enable yet) and the latest verion of iOS
    Kim

    Hi,
    You can reset your iPad by pressing and holding the On/Off/Wake/Sleep button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    If it doesn't work, you can restore your iPad using iTunes by connecting it to your computer.

  • No sound through built-in speakers (dv7-1243c​l)

    There is no sound through the built in speakers. The mute button on the touchbar under the screen is lit up red but the icon on the screen shows that it is unmuted. Whenever I try to disengage the mute on the bar, the light stays red but the volume icon changes. I'm pretty sure that its muted through the touchbar, is there specific software to re-install the touchbar?

    Hi,
    Download but don't install:
    IDT audio sp45073
    Disconnect from Internet.
    Uninstall from your system IDT audio drivers.
    Resources:
    Uninstalling Software in Windows 7
    Uninstall or change a program in Windows 7
    How to uninstall or change a program in Vista
    Restart your system:
    On boot press ' F8 ' and choose ' Safe mode '.
    Go to:
    Control Panel -> Devices Manager -> Audio, Video and Games Controllers
    and find there IDT audio card. Click on it with right button of your mouse and choose uninstall driver.
    Restart your system and this time start it in normally.
    Install this audio driver which You already downloaded.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Maybe you are looking for

  • Can not see records after was given select on table

    Hello, I have a database 10gV2 and I 'grant select on table1 to user1'. When user1 logged on, he can not see any data from table1. He can desc table1 but when doing a select count(*) from user99.table1 , a zero record returned. Or select * from user9

  • XML Publisher Email Body Attached Bursting Control File 11i EBS HRMS

    Hi there I have a problem with the Brusting , when I received an email through the bursting, I get the Email Body as an Attached File. XML Publsiher 5.6 Build 45 EBS 11.5.10.2 <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="burst

  • How to make the stage as a Matrix?

    I want to convert the stage to a matrix. I have an idea is to put a square movie clip (height and width are unit(variable), all the sizes of the objects on the stage are multiples of unit ) and make the movie clip the whole stage with 2 for loop. but

  • Does the iPhone 5c come in white instead of black ?

    Does the iPhone 5c come in white instead of black ?

  • LifeDrive can not be hard reseted

    Hi Dear Alan G.  Thank you for the quick reply and sorry for the my late response.  (a)When the LifeDrive is restarted I can hear the hard disk spanning (like the sound of analogy wall clock) for 1 minutes then it become silent. (b) When I shake the