No sound from built in speakers only headphone jack works

Not sure what happened but I only get sounds with headphones there is no sound from the speakers from my laptop envy15

Hi
Please find the link given below might help you to fix your issue.
Sound Issue
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • No sound from built in speakers but headphones ok, pavilion dv6

    HI all,
    Out of a sudden , after watching a youtube video, my speakers and headphone gave  noise when I was RE playing the video that I watched seconds ago.
    I restarted my lap, and then didn't hear a sound at all
    checked my drivers and updated them
    the headphone is working fine. but when I unplug it I hear no sound from my built in speakers. though the drivers are working fine.
    took my lap for maintenance to get it cleaned up and checked, they told me the speakers are connected and the wires are all fine! but the problem still exists.
    they wanted me to leave it with them to be checked ... but I just didn't trust them since they suggested the sound card is damaged! if it was dagamed I don't think I'll be getting any sounds ! right ?
    please, can any one tell me what could be the problem ? and how to solve it ?
    Pavilion Dv6 3120
    running windows 8.1 for the past year

    Hi Chaand,
    You can try installing this IDT High-Definition Audio driver, it is not for your model but it is a Windows 8.1 driver. There are no Windows 8.1 driver for your model. If installing that driver doesn't work then it is a most likely a hardware issue with the speakers and you should have either a local technician take a look at it or send it to HP for repairs. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing? The output sound settings are showing as digital optical only? Any ideas :)

    I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing from the port? The output sound settings are showing as digital optical only? I used the headphones in the laptop for the first time yesterday and have had this problem ever since. Any ideas

    The internal switch in the audio output port is stuck.  Try inserting the earphone plug a few times.  If no success, try jiggling a tooth pick inside in order to trip the switch.. If still no success, have the technicians at the Apple store genius bar do it for you.
    Ciao.

  • No sound from built in speakers on iPhone 4

    I had this problem once before and am not sure how I fixed it.  When I unplugged my earphones I no longer get sound via the built iin speakers.

    Unfortunately I didn't. I took the time to make an appointment with the Genius Bar and was told (by an unusually smug tech) to go home, back up my data, then restart the phone with the power button and center button down.  If that didn't work to then Resotre as new through iTunes.  I had already done all that so it seems I will eventually have to get a new phone. I asked said agent before I jump and pay for a new (4S) phone if there was the iPhone 5 set tp debit.  He answered unequivacally that there wasn't.  Several days later there was a news story hinting that there was.  With all that said I will live with my phone that sometimes rings and sometimes doesn't for as long as I can and wait to see what story is correct. 
    If you haven't tried any of the above you should (it worked once for me several months ago).  Good luck.

  • DM4-1160US - No Sound From Built-In Speakers!

    Hello:
    Last week I suddenly stopped hearing sound from the dm4-1160us (Windows 7 Home Premium 64-bit)  laptop.  As a technician myself for over 25 years, I have uninstalled, reinstalled, checked Device Manager for possible error notations, updated the BIOS to the model's latest version, tried the Microsoft so-called "fix" for the problem, and shut down and rebooted dozens of times, etc.  Still, nothing!  If anyone knows of a possible solution for this issue, I would greatly appreciated any suggestions or (dare I say) solution.  Thanks.
    This question was solved.
    View Solution.

    You can isolate this issue to a hardware or software fault by running a live distro of Ubuntu linix. See step number 2 to install it to a USB memory stick.
    If the device is not recognized by Ubuntu during its config operations that the probem is likely to be with the notebook's system board.
    Is your notebook still within the standard one year warranty period?
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Pavilion dv5-2077cl - no sound from built in speakers

    I ran updates. Updated driver. Ran HP troubleshooting and also checked online. Still nothing. Any suggestions?

    Hi Chaand,
    You can try installing this IDT High-Definition Audio driver, it is not for your model but it is a Windows 8.1 driver. There are no Windows 8.1 driver for your model. If installing that driver doesn't work then it is a most likely a hardware issue with the speakers and you should have either a local technician take a look at it or send it to HP for repairs. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • My ipod cassic no longer out puts sound from either usb port or headphone jack.

    I have done a full reset. Other than that it works fine. Plays movies plays songs just no sound.

    Hi ,
    After checking the HP Driver and Download page, as you said your product does not support Windows 8 or Windows 8.1. Since you have already tried the drivers directly from the manufacturer of the audio card. The only options that you do have are to restore your computer back to Windows 7 when it was working, leaving the computer the way that is, or purchasing the usb audio driver.
    Regards.
    I worked on behalf of HP

  • Dv6 Only plays Sound out of the built in speakers if headphones are plugged in ...please help

    My Pavillon Dv6 Only plays Sound out of the built in speakers if headphones are plugged in. It plays sound from both when there plugged in. Please hep me.

    Step 1:
    In troublshooting the problem you may follow the steps provided below.
      a. Click Start, type Sound in the Start Search box. 
      b. Click Sound in the search results at the top of the Start menu. 
      c. Click the Playback tab. Notice the check mark next to the default device. For most users,the default device is speaker, change it to headphones. Make sure that your audio settings are configured as expected.
    Step 2:
    On the Playback tab, select the playback device, click Properties, click the Advanced tab, and make sure that the Default Format is set to the value that you expect. When you finish, close this window to return to the previous window.
    Step 3:
    On the Playback tab, select the playback device, click Configure, and then make sure the configurations are set correctly.
    Method 2:
    If the issue persists then I suggest you to follow these below mentioned steps to mute all other sounds when windows detects any communications activity.
      a. Click Start, type Sound in the Start Search box. 
      b. Click Sound in the search results at the top of the Start menu. 
      c. Click the Communications tab.
      d. Click on the radio button according to your convenience, under When Windows detects communications activity.
    After performing the above steps you may check for the issue.
    For more troubleshooting you may visit this below mentioned link.
    Tips for fixing common sound problems
    http://windows.microsoft.com/en-us/windows7/Tips-for-fixing-common-sound-problems 
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Dell OptiPlex 3020: I only get sound from the internal speakers

    I have a brand new Dell OptiPlex 3020 running Windows 8.1. I am able to hear through the internal speakers, but I cannot get external speakers or headphones to work - I've tried both the jacks on the front and back.
    The microphone on my headset works correctly, but I still hear only through the internal speakers.
    Advice?

    Good day!
    Thank you for writing to the Dell Community Forum.
    Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
    Have a great day ahead.

  • TS1574 no audio from built-in speakers and red light visible through the headphone port

    My 15" late 2006 MBP has just stopped producing sound from the internal speakers and for the first time there is a red light visible inside the headpbone output port. Apple support says contact support but since I'm a long time out of even my extended warranty I wondered if anyone had a fix-it suggestion I might try myself?

    Try to plug the headphone into and out of the headphone socket couple of times
    to flip the microswitch in the socket.
    Red light visible means sound output is stuck in digital mode.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Procedure is same for 10.6
    Reset SMC.http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If these steps do not help, repair Apple Store is needed.

  • No audio from built-out speakers on my Mac book pro

    no audio from built-out speakers on my Macbook pro, but with external headphones or speakers it does work. I see a red light inside the audio line-out port when you disconnect devices. What can I do?

    The internal switch is stuck.
    Insert the earphone jack several times.
    Blow real hard into the audio output ort.
    Take a toothpick and jiggle inside the audio output port.
    If no success, visit the Apple store genius bar.
    Ciao.

  • HT4085 I has a problem and I am not able to solve that when I use sound effect it is showed only headphone even I did not installing the headphone I has a problem and I am not able to solve that I am. Not able to hear the sound without headphone please he

    I has a problem and I am not able to solve that when I use sound effect it is showed only headphone even I did not installing the headphone I has a problem and I am not able to solve that I am. Not able to hear the sound without headphone please help guys

    Sounds to me like a hardware issue or maybe something is stuck in the headphone jack. When you plug in headphones, the jack in the iPad is switched to play only through the headphones and not the iPad's speakers. Sounds like either the jack is faulty or there is something stuck in the headphone jack. Get a flashlight & look inside the jack for anything that looks like it doesn't belong in there.
    Regardless, I'd take it in to an Apple Store if you have one nearby to have it checked.
    EDIT: "Ocean20" had an excellent suggestion above. While doing that, you may also want to rotate/twist the plug in the jack back & forth a few times as well. Dirty contacts can often times be cleared by doing this.

  • I have hp dv6 6155tx i5 model my speakers n headphones are working simultaneously. what should i do?

    i have hp dv6 6155tx i5 model my speakers n headphones are working simultaneously. what should i do?its **bleep** irritating.

    I am having the same problem on my HP Pavilion dm3t (bought about 3 mos. ago:  no sound from internal speakers.  I have contacted HP tech support; they took over my computer but could not fix it.  They said to do a system restore (back to a certain time)---but the computer will only allow me to go back about a week---and it did not work.  I have checked other similar forum suggestions that seem to relate to this problem but none of them work.  Tech support says the next step is to do a system restore (going back to factory)---losing all the two dozen programs I have installed and a whole lot of trouble.  One forum poster says---and I agree heartily---that this is a widespread and growing and HP should 'take ownership' of it.  One expects more from a new computer.
       In the meantime, though, as Dell is looking like my next purchase for a laptop, I still hold out some hope for HP to make things right, for me and for many others.

  • Cq50-142us windows 7 64 bit headphones work but no sound from built in Altec-Lansing speakers

    I recently installed Windows 7 64 bit on my CQ50-142US after the hard disk died.  I've installed all the drivers that apply, and in particular the Conexant driver for the built-in audio parts.  The system has built-in Altec-Lansing speakers.
    I get no sound from the built in speakers, but if I plug in stereo headphones to the front-panel headphone jack, they work and they produce stereo sound no problem.
    I can't see any way to test the speakers.  If the system has any built-in diagnostic capability, I can't find it. 
    A Google search suggests I'm not the only person with similar problems.
    Suggestions?

    You can isolate this issue to a hardware or software fault by running a live distro of Ubuntu linix. See step number 2 to install it to a USB memory stick.
    If the device is not recognized by Ubuntu during its config operations that the probem is likely to be with the notebook's system board.
    Is your notebook still within the standard one year warranty period?
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • No sound fromMacBook built in speakers. can only use headphone jack.

    The speakers of my macbook have suddenly become mute.
    When I press the volume buttons, the volume icon appears, but has a circle with a diagonal line showing.
    The hole for the headphone jack is constantly shining a red light from it.
    I can use headphone from it, and all volume controls return to normal.
    I've rebooted a number of times to no avail.
    Any suggestions?

    you've managed to activate your digital out, if you cant get it to go off by sticking in the headphones, use the end of a match gently and see if you can get the red light to go off, if not then you will unfortunately have to take it to an apple store

Maybe you are looking for

  • Clone DataSource - view video while transmitting - EXAMPLE no answer

    Thanks to me and captfoss, I create this application for all who want to understand how to clone DataSource. Use this on SERVER side * @(#)AVTransmit3.java     1.2 01/03/13 * Copyright (c) 1999-2001 Sun Microsystems, Inc. All Rights Reserved. * Sun g

  • File Content Conversion issue in PI 7.1

    Hi Experts I am working on a file to Proxy scenario, I am getting a flat file with , separated but my file will have multiple nodes and I need to do the content conversion and map it to the following structure Interface Header   InterfaceName   UserI

  • Kernel Panic in 10.7.2

    Hello Community! I have setup a new Mac mini i7 Server connected to a drobo 2G over FireWire. I keep getting kernel panics (irregularly). Can anybody give me an advice as to what I could change in order to not have my system crashing? I have already

  • Some files have been deleted

    I have noticed some of my files are missing and I want them. When I want to delete text I select or highlight and then choose "delete". Before deletion is complete it asked me "archive deleted events on next hotsync" Where do they go and can I look a

  • New Hard drive, will this work?

    Hey guys, just found this stuff, will this work in my 2.0 white macbook? Just wondering, thanks! http://welovemacs.com/sata160gb.html Also, to be compatible with my setup, what are the requirements? Just 2.5 and 9mm? thanks!