No sound from Center or Subwoofer during Calibrat

I have a Sound Blaster Audigy 2 ZS and the Klipsch Promedia Ultra 5. Speaker System. During speaker calibration, I hear the test tones from Left, Left Rear, Right, Right Rear but not from Center or Subwoofer (the indicator flashes over the center speaker icon in the graphic but no sound comes out - same with the subwoofer).
I know the subwoofer works when playing music but have not heard anything from the center speaker.
Any ideas?
Thanks.

I have the same problem, games and music etc all speakers work, but during the tests/calibration I get no sound from rear speakers, center or the sub...... help please! (from the firewire port out the plugs all go as follows: yellow, black, green)

Similar Messages

No Sound From Center Speaker [Win 7]

$No Sound From Center Speaker [Win 7]? Hi,
I downloaded the Darkest of Days demo and noticed that the speech volume was very low if i positioned it center of the camera. But if i positioned it on the left or right of the camera, the speech volume would increase. I found it strange.
I closed the game. And ran my speakers through window's speaker test. Every speaker responded with a sound. Unconvinced, i opened a few songs. That's when i noticed the center speaker wasn't producing a sound. Even on 5. content (movies & music) the center speaker wouldn't work.
**bleep**, no wonder those AC3 movies had low speech and i had to manually boost the speech volume. I noticed the low sound in games before too...but i attributed it to the 5. surround thing. Guess i was wrong!
System Rig:
Intel Core 2 Duo E6400 @3.2Ghz
Gigabyte P965-DS3
[color="DarkOrange">ATi HD4850
Twinmos 3xGB DDR2 800Mhz + GB OCZ 800 MHz
Zalman 9700
Creative Audigy2 ZS
Creative Fatalty Gaming Headset
250GB Seagate SATA-II 7200.0 8MB
Enermax 535W PSU
Logitech X-540 5. Speakers.

Hi
Can you clarify that are getting the voice when you play the DVDs/CDs?If you are not getting the voice and you are getting the sounds only? Then there could be some connectivity issue for Center Speaker.Pl check the connections .. Regds Balu

No sound from speakers, only subwoofer after restore to factory

I recently restored an HP pavilion dv7 back to factory settings using the built in hp restore. When it came back, sound will only play through the subwoofer. When I do sound tests, I hear both channels play, but they play through the one "triple bass reflex subwoofer" on the bottom of the laptop. Nothing coming from the two speakers in the front at all.
I have uninstalled the IDT drivers multiple times using the current drivers, the original drivers in the swsetup folder and many drivers in between from HP's ftp site. No luck. I'm pretty much out of ideas. It's clearly a software or driver issue as they worked before the reset but I have no idea what else can be done about it.
HP tone control is installed, the beats audio panel is visible, IDT audio shows up in appwiz. Ive seen a few forum posts about this same issue but nothing that ever seemed to get resolved.
Any ideas? I've included some screen shots of what I'm seeing

Hi @etainw ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv7-4000 Notebook and issues with no sound from speakers, only subwoofer after restore to factory. Here is a link to troubleshoot the Subwoofer on Beats Notebooks. On the Enhancements tab, select the Bass Boost option, and verify the device driver is Enabled, this should help.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

No sound from center speaker during calibration, games, DVD movies (have already read the stic

For those that point at the sticky topic, let me just say that I've already read it, implemented the suggestions there, and it has provided no result.
My setup is an Audigy 2 ZS card mated with Altec Lansing VS35 5. speakers. I've connected the cables correctly, enabled CMSS, updated my drivers to the latest version, but during Speaker Calibration, playing games, watching DVD movies, there is no output from the center speaker. If I watch encoded movies (avi files), I can hear sound from the center speaker. So what seems to be the problem? Anyone got any suggestions?Message Edited by mofo on 03-9-2005 08:0 AM

I have the same problem, games and music etc all speakers work, but during the tests/calibration I get no sound from rear speakers, center or the sub...... help please! (from the firewire port out the plugs all go as follows: yellow, black, green)

No sound from center speaker and static from Subwoofer

Hello everyone,
I have used the search function and found several topics with the title "no center sound" but none of them had a usefull solution for me. I am using a Medusa 5. Headset and have connected it correctly. Note that the setup worked for over 3 years, but aperently recently something in the settings must have changed since I noticed playing Fallout New Vegas, that my center sound is missing.
Here are some facts :
I am using Windows Vista home 64 Bit with the X-Fi Xtreme Gamer card
Using the Creative Console Launcher ver. 2.6.09 (Settings on Game Mode, CMSS 3D disabled, Crystalizer disabled and EQ disabled). Clicking the center speaker for testing, gives me no sound. Clicking on the subwoofer gives me a static sound. Going to the settings "Bass" and enabling Bass Redirection. Doing the same test gives me a "dull, hollow, silent, very far away, hardly hearable" sound on center and the subwoofer speaker, but not a usefull result.
Leaving the Creative Console Launcher and going to the standard Windows Vista sound menu, I can there click speakers for testing aswell. There is still no sound from the center speaker, however clicking on the subwoofer gives me a very nice bass sound, so working as intended for the subwoofer.
I tested the center/subwoofer connection by connecting it to my Ipod, speakers are working.
All drivers and application are the latest version.
On the webpage of Speedlink (the manufacturer of my headset) they refer to a THX Console. I am sure I have seen that application on my system long time ago, but it is not installed anymore. I can't find it on the creative page either, so I am a bit confused where that program went (and even if it can help my problem).
I am 99% sure it has to do with a setting somewhere in the software, but I can't find it. Any idea?

Hi,
Can you please launch your Creative Console Launcher and click on the Default checkbox? That should reset everything back to it's default settings. Run the speaker test again to see if you are getting sound from the center speaker.
If possible please test the sound card on another computer, that should help you find out if the sound card is faulty or not.

X-Fi Titanium: Almost no sound from center speaker in 5.1 mode (optical out)

Hi everybody,
I have searched the forum, but not found any post regarding this problem, so I'm gonna post myself.
First of all: I have an X-Fi Titanium that is connected to my Home Theatre Dolby Digital/DTS Decoder via optical cable, so I use the DTS Li've encoding feature of my X-Fi to get 5. surround sound.
But from the beginning I've had the following problem: When I start a game, the sound is perfectly normal, but suddenly (not at a specific action, just out of nowhere) the sound from my center speaker is almost inaudible, extremely dull. So I can still hear, for example, the explosions or voices that come from the sides or the back, but everything that is right in front of me or is played back only through the center is almost silent.
When I quit the game, start the THX-Console and click on each speaker, all of them except the center speaker play back the test sound (like "front left", "front right" or whatever it is in the English version, I have the German version).
Switching to another mode (game, entertainment or the third, don't know what it's called in the English version), resetting the sound card via the control panel or clicking on "Standard" (or maybe "Default" in the English software?) does not bring back the sound on the center speaker, all I can do is switch to two-speaker- or headphones-mode so the center speaker is not used. Even rebooting windows does not work. I haven't figured out yet what exactly helps, but usually after a while suddenly the center works again.
The only reliable solution is to reinstall the whole software and driver, but with the slow Creative servers, it always takes hours to download all updates with Auto-Update, and installing everything with each single file for each little software module isn't much faster either.
I must say that I am very disappointed by Creative. Before my X-Fi Titanium I had an X-Fi Platinum, and the drivers really sucked. I hoped that this was because at that time, the X-Fi series was still quite new. But almost nothing has really improved since then. I would like to have ONE installation routine for the whole software package, with checkboxes to choose what I want to install, and not only when using the original CD, but also with the update files for download. And, most of all, I want the driver to just work! Since the beginning, I've only had problems with these cards.
Anyway, I hope someone can help me on this. Thanks a lot in advance.

I think I see what is happening now.
When using the analog outputs (5.), you have to enable bass redirection, and set the front or back speakers to small in the "Bass Management" screen of the THX control panel.
Bass redirection does not send anything to the subwoofer if the front and back speakers are all set to large. There should be a bypass switch for this, so the bass can be sent to full size satellites and the subwoofer.
When using the spdif DDL output, my receiver would decode and send bass to the subwoofer on it's own.
Only buggy part I'm noticing now is that I lose all bass occasionally on boot, and must do an "Auto Detect..." in the "Speaker Configuration" screen of the THX control panel to get it back.

No Sound from Center Spea

Well, I got a few problems with my Creative Li've! 5. Digital (Model SB0220), but for purposes of practicality, I'll focus on the latest, most annoying problem.
I get no in-game sound/ Media Player sound/ itunes sound/ etc. from my center speaker.
That is to say, when I enter the Creative HQ, I test all fi've speakers of my Logitech X-530 5. Surround sound system, and ALL of them report back as working- I hear sound out of all of them.
Background:
I have enabled 5. support from my Creative HQ, I have used the install CD to install the software, although my drivers have failed to properly install, like many people report with these 5. Digital cards. Having said that however, I still get good sound from the remaining four speakers in my system, and they seem to function well for games/movies, but that **bleep** center speaker is annoying me.
I've tried re-installing the drivers I was able to find on www.driverguide.com, and got the same "Unable to detect any Sound Card on your system" message that everyone with my card seems to get, so I tried to manually install the drivers by extracting the file, going to the audio/WinXp_2k folder and applying those drivers to the 'unknown audio controller' in my Device Manager, but again- no dice.
I don't want to have to re-format my computer just to get this to work, and I'd love some feedback as to how to proceed from here.

So I've got a new speaker set now, and tried it out... to my immense disappointment I still don't get anything from the center speaker. Is there something special you have to do to get this thing working? There's always that chance I missed something, or am I just stuck with a defect in my Audigy card?
edit: I have just tried it with the onboard AC97 sound chip, and then the center speaker works :s (why didn't I think of that beforehand)
So is there something special you need to enable with the Audigy card setup or is mine simply defect? 'Cause this isn't really how it should be, buying a sound card for better sound and then noticing the lowly onboard soundchip works far better...Message Edited by 65532 on 2-03-2005 0:09 PMMessage Edited by 65532 on 2-03-2005 0:0 PM

No sound from center speaker

hello all,i have a inspire 5.1 5200 speaker system. i am getting sound from all speakers except center speaker. the speaker itself is working because i connected it to the right fromt location and got sound out of the speaker. any help with this matter would be greatly appreciated.

You're not the only one;
see the post http://forums.creative.com/creativelabs/board/message?board.id=speakers&message.id=9489
I hope it helps, or at least comforts you in knowing that at least the speakerset can be in order...

Inpire P5800 : No sound from center and rear speakers

I have just bought the Inspire P5800 speakers system (5.1) and only the two front speakers and the buffer produce sound. The problem may come from the fact I have an single output audio card (RealTek AC'97). Is there anything to do to have the sound coming out from the 5 speakers (expect buying a 5.1 audio card) ? I read my audio files with winamp and WMP.
Thanks
Sebastien

Hi Guys,
I would really appreciate if somebody could reply to my query. Its been very frustating here.
In the meanwhile I have done the following troubleshooting more :
1) Took a head set and connected to all ports at the back of the sound card. Sound is coming from there.
2) Went ahead and removed the creative drive and the application.
3) did a search in the registry with the keyword as "Creative". Removed all entries that were found.
4) Reinstaled the latest drivers and the application.
5) Tried he card ina different PCI slot.
But everything has been to no avail. There is still no sound from the rear and front center speakers. Its really driving me nuts.
It seems as if the souncard is passing the signal to the sub woofer but it is not directing it to both these channels.
Any help would be deeply appreciated.
Regards,
Amit

Audigy 2 ZS Multi channel is not working , no sound from center sub rr rl sr sl ( only front channel is working )

I have windows 8.1 and Audigy 2 zs .
i can change speaker settings to 5.1 or 7.1 or anything i wanted but there is big problem
i can only hear sound from the front channel ( speaker )
if i click on the sub-woofer ( in speaker configure window to test the each channel ) i still hear the sound from front speaker !!!
i try a lot of thing to fix them and i fix it 1 time with change the system date to earlier time ( 2013 , 2014 )
but now i can't fix this problem !
please help me
did anyone have the same problem ?

I installed new driver support pack from Daniel K and now my problem fixed , I really shame for creative to don't create new driver for its sound cards and a 1 person was created a driver better than creative company if I was in creative company I would hire Daniel K and give him a kiss !

No Sound from Logic Express 8 during track playback?

Hi and Help. I am probably being stupid and I guess this is simple to clear up. I have read the manual but I can't find a resolution (probably miussed that to!). Anyway the problem is this, I have just bought Logic Express 8, set up was fine on my macbook pro intel core duo which is also linked to logitach Z-10 speakers (actually good!). Upon opening Logic I set up a track (by the way Core Audio is on) and drag a loop from the brouser into a new track, it locates in the track and I play it back, nothing, not a sound or blip on the channel indicator. I can audition the loop in the brouser and it plays fine. Why no sound playback from the track??
Can you help please, I have odviously missed something simple but I don't know what it is.

Well yes I was being stupid. I have resolved the issue, it was down to understanding terminalogy. All is working.

Sound from macbook - not TV - during Apple TV Airplay HELP!

I connected my macbook to the TV via Apple TV Airplay, and the sound only comes out of the laptop, though the screen mirrioring still works. Would love some help.

The audo goes through fine with my HP laptop but not with my mac(using the adapter) I have tried EVERYTHING

No sound from subwoofer using 5.1 c

Right and left work fine when tested. No sound from center sub-woofer when set to 5. speaker mode. Speakers are Yamaha YST-MS20w 30watt. Worked fine on my old PCI 28 card.

Are you saying your sub. w. speaker is not amplified (is passive) either by internal or external amplifier? You should be using active (amplified) and not passive non-amp.) speakers.

No 5.1 sound from Elite HPE-575a with Logitec X-530

Controller is IDT High Definition Audio CODEC.
Speakers/Headphone Properties, General Tab - Jack information does not match the actual inputs/outputs on back of PC.
Properties screen shows LR,LR, C Sub, RL RR -4 Jacks
Actual on PC has 6 jacks - in, out, mic, c/sub, rear, side
Connected by color code matched jacks and plugs, matched labelling, I.e. c/Sub in c/sub, rear in rear, Side in side.
I only get sound from center speaker and sub. Ideas? Suggestions?

This behaviour is by design:
SPDIF Digital Connections only carry 2 PCM signals, which means only stereo.<
Technologies like Dolby Digital/DTS and there PC-oriented Li've versions encode 5. signals into the 2 channels offered by the SPDIF standard. This is not supported in any Sound Blaster card at the moment.<
The receiver of your speaker system must support Dolby/DTS and decode it into PCM before it can be played back. (I assume, the GD-series Inspires, do that)<
As a result, you can only get 5. sound from a single SPDIF connection only when listening to Dolby Digital/DTS content, like DVDs and .ac3 files, and you select offcourse? SPDIF passthrough in either the DVD software or Creative's drivers.<

X-Fi Fatal1ty No sound from rear or center in speaker tests?

I just installed the X Fi Fatalty Xtreme Gamer and cannot get sound from the rear, center or subwoofer in the speaker tests. All the speakers (Logitech G-5 Gamer)?work playing MP3's but that's it. Installed latest drivers uninstalled an reinstalled card etc?Can anyone help with this before I box everything up and ship it back to newegg? Running Vista 64Message Edited by ovrclkd on 0-23-200807:6 PM

After carefully checking this again, it turns out clicking front left or right the sound comes out BOTH the front and rear. To make things more confusing when all but the line (green) 3.5 jack was unplugged ALL the speakers would work. LONG STORY SHORT I SENT THIS P.O.S. BACK TO NEWEGG FOR REFUND. Every thing works great with the onboard audio, I'm in the market for a 7. that works.Maybe Auzentech? Any suggestions?!! With all the issues the peeps are having someone must be using a card that works out of the box in Vista 64

No sound from Center or Subwoofer during Calibrat

Similar Messages

Maybe you are looking for