No sound from demos

I've just loaded LE on a brand new iMac G5 and I've been trying to play the demo but I'm getting no sound although otherwise the demo seems to be working fine.
I'm using the internal speakers for now which seem to work fine with other apps. Also I've checked Audio/Midi setup and System Prefs to ensure that they're setup for internal speakers.
Hope someone can help.

Have you been to the preference within logic itself? Go to the logic menu, then preferences and audio. Then go to the driver tab, and make sure that core audio is enabled.

Similar Messages

IK iRig stomp no sound from guitar

I cannot get my IK iRig stomp to produce output from my guitar. I have my iPhone 5 and my guitar plugged into my iRig stomp and am using my headphones. The guitar signal from the iRig stomp does not play through my headphones. I can play the demos in the Amplitube app, I can play my music library through my iRig stomp, but I cannot get anything when I play my guitar. I wasn't getting the warning pop-ups so I deleted and re-added the app. Then the warning pop-ups came up, but still no sound from my guitar. I've changed the pedal and amp volume in the app. I've adjusted the volume on that iRig itself. I've disconnected everything and plugged everything back in in the order recommended by the IK tech support. I plugged everything in in various orders and I still cannot get my guitar to play anything through the iRig stomp. I've changed the cable connecting my guitar to the iRig stomp, the cable connecting my iPhone 5 to the iRig stomp and used both headphones and speakers. I've adjusted the volume on my guitar. My guitar is a brand new (literally taken out of the box 3 days ago) Ibanez AEL207 that plays perfectly through an amp. Nothing works!! I've read in another forum that a user reset his phone to default settings and everything worked. I am not willing to do that because I am currently deployed and do not have a computer to save or add my music and videos to. Any assistance would be greatly appreciated.

Yes, me too. I happened after an upgrade to Garage Band 1.2. Before the upgrade things were working fine.

No Sound From Center Speaker [Win 7]

$No Sound From Center Speaker [Win 7]? Hi,
I downloaded the Darkest of Days demo and noticed that the speech volume was very low if i positioned it center of the camera. But if i positioned it on the left or right of the camera, the speech volume would increase. I found it strange.
I closed the game. And ran my speakers through window's speaker test. Every speaker responded with a sound. Unconvinced, i opened a few songs. That's when i noticed the center speaker wasn't producing a sound. Even on 5. content (movies & music) the center speaker wouldn't work.
**bleep**, no wonder those AC3 movies had low speech and i had to manually boost the speech volume. I noticed the low sound in games before too...but i attributed it to the 5. surround thing. Guess i was wrong!
System Rig:
Intel Core 2 Duo E6400 @3.2Ghz
Gigabyte P965-DS3
[color="DarkOrange">ATi HD4850
Twinmos 3xGB DDR2 800Mhz + GB OCZ 800 MHz
Zalman 9700
Creative Audigy2 ZS
Creative Fatalty Gaming Headset
250GB Seagate SATA-II 7200.0 8MB
Enermax 535W PSU
Logitech X-540 5. Speakers.

Hi
Can you clarify that are getting the voice when you play the DVDs/CDs?If you are not getting the voice and you are getting the sounds only? Then there could be some connectivity issue for Center Speaker.Pl check the connections .. Regds Balu

K9N Platinum- Only 2 channel sound from SPDIF

Hi Guys,
I am struggling to get a 5.1 output on SPDIF in the Realtek Manager. If i run the 3d sound demo, all i can hear is sound from the front 2 channels, no centre or surrond speakers. This is extremely frustrating. Can someone help ??

Quote from: ivon on 09-August-06, 17:23:28
I am tempted to go and get the Creative card...However one of the reasons why i shelled out money for this Mobo was because of the SPDIF out put ...and i cant get even the Realtek sound manager to out put to the five speakers...
I could have gone in for a cheaper ASUS board and a creative card...however i cant afford another card at this stage mate. Need to figure out a way to get this working.
Where can i get the latest drivers for the 883 chipset.
Jal
STOP!!!!!
Don't just go and buy a Creative card, read these first:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=12170
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=70769&query.id=157202#M70769
If you want surround sound using spdif (optical or coaxial) the cards from Auzentech is for you. I'm using the HDA Xplosion but I think they are going to release a new card called X-purity in September. Their card can ENCODE Dolby Digital and DTS so you can enjoy surround sound using spdif. To be honest, my card, the Xplosion is not that great for gaming as it uses software+hardware Dolby digital/DTS encoding so you will lose some CPU usage for the card. It'll also cause your system to lock-up sometimes if the driver is corrupted since the encoding relies heavily on the driver. Eventhough it has those problems, I would not trade this card for a Creative card, not until Creative makes a card that will encode either Dolby Digital or DTS. The advantage is you can connect your PC with a home theater system or if you are using a Logitech's digital speaker (Z5450,Z5500) you can use the 3 analog inputs for 3 other device rather than only from PC. Btw the analog output of my Xplosion is also good but not as good as X-Fi, but you can change the opamps to make it better, but it wouldn't change the digital output quality at all.
http://www.auzentech.com/products.html

Sound from new MSI R9 280X - coil whine? RMA?

Hey all.
Just trying to determine if the sounds coming from my new PC's video card are normal or not. Here is my build: au.pcpartpicker.com/p/1XKQb
I hear this sound when running what I would consider low end graphics tests as well as when I booted up BF4 for the first time last night. Graphics automatically set to high.
I've recorded a few sounds of the 'squeals' that I hope are good enough for people to make a judgement. The sound seems to be coming from the part of the video card where the power connects. I have reseated the card and tried using a different power cable. It is not an issue with the fans.
First is a capture from a test in Unigine Valley:
soundcloud.com/angryeye/sounds-from-friday-evening
Second is a sound from loading Team Fortress 2 and then moving the mouse a little bit.
soundcloud.com/angryeye/sounds-from-friday-evening-1
Interestingly, when I enable Vsync in Team Fortress 2 the sound disappears. If I enable Vysnc in the Unigine Valley test, it does not make a difference.
I also ran a test in the 3D Mark(did not have the option to change anything as it is only a demo) and the Ice Storm made the worst sounds from the card:
soundcloud.com/angryeye/ice-storm
soundcloud.com/angryeye/ice-storm-2
Considering buying 3DMark so I can muck around with the settings a bit and see which cases I hear the sound and which i don’t
I also loaded up BF4 last night and got the noise with VSYNC enabled or disabled(can record if needed). Also the same issue in Deus Ex, makes sounds with Vysnc on and off.
Can anyone with a MSI R9 280x confirm if this is normal? Is this coil whine? Reviews on newegg seem to indicate a lot of people are getting similar sounds and I’m not really thrilled with this considering it’s a brand new card and the first time I've built and i can hear this through the case and fans.
Could it be something that can be fixed by modifying voltage settings (as it seems to come from the power connection)? Or does this require an RMA?
Any advice appreciated.

so your parts are:
CPU: Intel Core i5-4670K 3.4GHz Quad-Core Processor
Motherboard: MSI Z87-G45 Gaming ATX LGA1150 Motherboard
Memory: G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-1600 Memory
Storage: Samsung 840 Series 250GB 2.5" Solid State Disk
Video Card: MSI Radeon R9 280X 3GB Video Card
Case: Cooler Master HAF XM (Black) ATX Mid Tower Case
Power Supply: Antec HCG M 750W 80 PLUS Bronze Certified ATX12V Power Supply
Operating System: Microsoft Windows 8.1 Pro - OEM (64-bit)
ok there are 2 causes of coil whine and odd noises so be totally sure its coming from the Graphics card itself by getting your mike directly over it and move it around and test other parts for noise as sometimes its The PSU (Power Supply Unit) that is doing it or it can cause it as yours is a split +12v unit (+12V1@40A, +12V2@40A) it may be the cause as Antec at times do not make reliable units (those rating is has for 2 rails look to me as being fake as they exceed its power limits combined (12v x 80A = 960W so it can probably do 40A on one but then the other will be terrible at 22.5A as it looks like there doing virtual +12v rails with 40A OCP fuses)) so its suspect as it may not be behaving well!

No sound from TV when using HDMI from HP Envy Ultrabook4 despite downloading drivers

Problem: When using an HDMI cord from my HP Envy Touchsmart Ultrabook 4 (4-1105dx)to connect to my TV to view movies, the video appears on my TV screen, but there is NO sound from the TV. Instead the sound comes from my lap top.
Troubleshooting: I have looked under Sounds in the Control Panel, but the only choice listed is Speakers & Headphones IDT High Definition (which is the default) and does not allow sound from the TV when using the HDMI. I have also tried to download Driver and Audio Graphics, but wasn't sure which one & the ones which were downloaded have not solved the problem.
Can you assist me? Which is the correct Audio/Graphic Driver to download? Or is there another possible reason why I cannot hear sound from my TV when using the HDMI to connect to my lap top?

Hi,
Please try this first to enable Speakers in Playback devices as follows:
1. Right click speaker icon (bottom right hand corner)
2. Select Playback devices
3. Right click HDMI sound
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do i use my apple express speakers as the sound from apple tv?

how do i use my apple express speakers as the sound from apple tv?

Welcome to the Apple Community.
You can't with the Apple TV 2 or 3, with the Apple TV 1, you can choose them from the Airtunes option in the settings menu.

No output sound from output port/analog audio: Need help

hello, I want to connect my analog audio equipment to my iMac. I have done this in the past with my old G3. I have connected the RCA cables to a 3.5 mm jack and put it into the audio input port, which was what worked on the G3. When I open the sound page for input & output, on Output I can see the volume bar thing moving in relation to the sounds from mic, turntable, etc: all the analog audio things. However, there is no actual output of sound through the iMac;s speakers or a headphone. The output page is pretty simple so I am real sure I have all the rigt things checked, unchecked etc. Any ideas? Thanks.

I had what sounds like a similar problem to jazzzrat. i had my macbook setup to a stereo and it worked for over a year. suddenly no sound came out of the stereo. in my case, it definitely was a software setup thing.
plug in your stereo jack into the audio out port. then go to system preferences-->sound-->output. on there you should see, under "device for sound output": Name=Headphones, port=built-in output. (if you see name=built in speakers, you plugged in the wrong plug). Now go down to the bottom of the window and UNcheck the "mute" box, and make sure the volume slider is midway or more.
For some reason, mac allows you to mute the "headphones" and "built in speakers" selectively. we have no idea how that box got checked, that remains a complete mystery. but when we eventually found -- and unchecked -- the box, our stereo output came back just fine.
i hope this works for you. good luck and have a good new year.

What do I need to get better sound from my Mac mini

The sound from my external speakers is very poor. I am hard of hearing(50% in one ear) and I find it very difficult to follow a conversation etc.
I am now on Yosemite, and the speakers have been used on all my previous pc's successfully. I cannot find a control for the built-in audio, does one exist?

What do you mean by poor sound?
The Sound is controlled by System Preferences>Sounds>Output

I've connected my ipad to my TV via hdmi but cannot get sound. Is there a way to get sound from the TV?

I'd like to get sound from the tv for my keynote presentations. Is there a way to do this via the hdmi connection? Or do I need to connect an 'audio-out? Thanks in advance for your help

the hdmi should transfer both sound and picture
http://store.apple.com/us/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt er-4k?fnode=a8e08a2bb3c16bf3cd606aecff68b12c10fe327cd7b063c9bbc492e57158bbfa0778 d5b941eb2a8c1c5f2e25e51cf7b82e193c9a722651b3fc2694996f7b5281b8bf4338c46284247b76 ccce6907fa6caee062d974158ee4d0336fca558384426e7a6c6cbf3ee58c8f53f8db53c9ef91
Supports multi-channel digital audio output on compatible devices
make sure your ipad is not muted
make sure you volume is not all the way down
make sure audio play out of the ipad when not connected to the hdmi adapter
if you did and it don't work then it's likely an issue with the connetor
or the tv or it's settings

No sound from optical output when using hdmi/dvi cable

I am trying to connect my apple tv2 to my B&O Beovision 7. I have used an HDMI to DVI cable which is working fine for the picture; but obviously DVI does not carry sound. I have therefore connected an optical cable to the digital optical output on the apple TV and put this through a converter to digital coax, which then goes in to the TV. I know the optical cable / converter set up works fine as I have tested it on my sky box and it works fine. But I get no sound from the apple TV - any ideas?

I hav exactly the same problem... Did you resolve this??

No sound from the TV when using HDMI cable, No sound from the TV when using HDMI cable

I recently purchased HDMI cable and adaptor, so that I can play downloads from my Macbook Air on my TV. There is only sound from the Macbook, not the TV - Do I need as separate cable for sound?

I've got the same issue: when I connect my Macbook Air (2011) to TV via HDMI cable there's no sound through the TV system, only from the Macbook Air. I used to use my older Macbook Pro with the same HDMI adapter and it worked just fine, but not with the Macbook Air it doesn't.
My software is up to date. I tried to select the TV as an output option in sound preferences, but it doesn't yield any results.
Rebooding multiple times doesn't help either.
Any suggestions on how to tackle this problem?
Thanks in advance.

Recording sound from DVD and CD play

I just bought a Zen V Plus. Could someone please tell me how to record sound from a DVD and/or CD to my MP3? Thank you!

Try this:
1. Connect the Line IN jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied line-in cable.
2. Press the Back/Options .You may need to do this more than once until the main menu appears.
3. Select Extra button to start a line-in encoding.
5. On your external stereo source, start playing the song you want to encode.
6. While encoding, you can press and hold the Back/Options button and select one of the following items:
Pauses the encoding. You can also pause the encoding by pressing the Play/Pause button.
Stops and saves the encoding. You can also stop the encoding by pressing the Record
Split Ends and saves current recording session, and begins a new one.
7. Press the Record button to end the line-in recording. The recorded track is named LINE followed by the date and time of the recordin YYYY-MM-DD HH:MM:SS<. For example, if you record a track on March 5, 2004 at 2:57 pm, the track is named LINE
This information can also be found in your user's guide, it's a .chm file found in your installation cd.

HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

After upgrading to yosemite my macbook pro late 2011 does a random sound from time to time.

After upgrading to yosemite my macbook pro late 2011 does a random sound from time to time. Its completely random and i already checked all apps in use and its not from them.

Sounds like Notifications app.
Maybe some other app. In SystemPreferences->Users&Groups->LoginItems tab: remove all entries with the minus sign underneath. This will not uninstall anything, you have to start those apps by hand now. Restart.
Still there?
Yes: Restart again while holding the shift key, this will start the mac in SafeMode: only the necessary items are loaded to run.
Still there?
Yes: Make an etrecheck list and post it here.
No: Restart, put the items in the LoginItems back, one by one, restart after each entry, and you will find the "culprit"
Please report accordingly. I will be back in 24 hours.

No sound from demos

Similar Messages

Maybe you are looking for