No sound from edited audio track?

This may be a very simple fix but I am unable to figure it out. When I add a new audio track in the arrange window and start chopping it up into separate waveforms, when I go to play back the audio I get no sound! I don't recall logic 8 doing this to me a few weeks ago but it just started doing this! Any ideas? Thanks for any input =)

I have the same problem. When I import the video and then hit the play button (bottom left) I get no audio. If I skim the curser over the film clips, I get audio, but when I hit Play in either window (edited film, unedited film) I get NO audio. Can anyone help??

Similar Messages

  • No sound from some audio tracks ... help!

    I am using GB 08 to add music to a movie for a friend's memorial. ( A keynote presentation exported as a QT movie)The Movie itself has no audio, I want to use a variety of songs that blend into each other.
    I'm used to doing this with Final Cut, but decided that i should familiarize myself with Garage band this time.
    I just added the 10th track and now can't get some of the other tracks to play. It's weird.
    Tracks 2, 4, 6, 7, 8, 10 play, but 1, 3, 5, and 8 don't.
    (i suppose i could just split the odd tracks and move the sections to the tracks that play, but that wouldn't really give me an answer for this)
    I have volume level keypoints where the volume rises and drops, and this action does happen on the volume sliders, and the green levels are visible, but no sound.
    None of the tracks are muted or soloed.
    Any suggestions for correcting this?
    I've closed the program and restarted it and one time everything was fine, until I added that 10th track
    thanks for your help
    Elizabeth

    Okay, thank you, I just tried it
    I added a new basic track, it was not muted or soloed.
    So i dragged my audio into this new track and it played fine
    then i deleted this track and just simply dragged my audio into the composition, as I have been doing, to create it's own new track, which then also played fine, then I deleted this one.
    then i added 2 basic tracks (since the problem seems to be with alternating tracks) and dragged music into them and they both work.
    so I don't know how to make the problem recur with the new tracks, but the original tracks that I wrote of, still don't play.
    Anyway, I've saved it as a version b and have been cutting and pasting the bits of the 'silent' tracks into the good tracks so that they play .... looks a bit like a mosaic but is working so far.
    very inconvenient though.
    Any more suggestions??

  • [SOLVED] How to Create OGG Theora Video From an Audio Track + 1 image

    Does anyone know how to create an OGG Theora video (.ogv) from an audio track and one still image. I just want one video frame to repeat until the audio file is finished playing. Make sense? Any help would be appreciated, and if possible I'd love to do it with ffmpeg2theora. Thanks!
    Last edited by tony5429 (2009-11-30 03:14:54)

    http://lists.mplayerhq.hu/pipermail/ffm … 19761.html
    I've tested it w/ 'ffmpeg -loop_input -f image2 -i image.jpg -i sound.mp3 blah.avi' and the output works w/ mplayer but I had issues w/ .ogg and .ogv output.
    In case vlc and gstreamer won't do, check out http://v2v.cc/~j/ffmpeg2theora/
    Last edited by karol (2009-11-29 16:43:23)

  • Export edited audio track in Final Cut Express

    Does anyone know how to export an edited audio track as a mp3 without it being a video file using FCE?

    Use Export>QuickTime Movie and change the export function to audio only. Take that to iTunes and use it to convert to MP3.

  • Editing audio tracks in Windows/Properties option

    Hello all
    Can someone please tell me whether I can edit an audio track in the windows/properties dialog box? I'm trying to synchronise a sound track with a video/movie and am having a little difficulty getting the various bits of music to start and stop precisely where I want them to. It occurs to me that if you can edit in the windows/properties box, you can fine tune the precise start and stop times (displayed in time/frames).
    Or maybe there is another way to do this (apart from highlighting desired section of movie and then adding an audio track with "add to selection and scale") which someone can tell me about?
    I also wondered whether it is possible to "view" the audio track simultaneously with the video?
    With thanks
    MB

    You don't edit tracks from the Movie Properties window. It is for viewing the tracks, adding annotations, applying masks or setting transparency or layers.
    You can "extract" tracks to edit them in this new Player menu. You can play more than one file at a time (View menu / Play all Movies).
    You can "fine tune" making a "selection" (in and out points) by holding down the Shift key as you tap the right/left arrow keys. This may help you synchronize the audio to the video track.
    Using "Add to Selection & Scale" makes (forces) the tracks to have the same duration.

  • No output from recorded audio tracks, only midi tracks..please help

    I've been working on a song in Garageband and suddenly lost audio from real instruments and can only hear the midi from last night until today.  It consists of 3 midi tracks and 9 audio tracks.  I have software plugins or FX on almost all 9 tracks with amplitube or similar.  Things are slow as the arrow is red at the top, however last night I was able to still make changes - slowly.  I was able to do a mixdown and export to mp3.  Then I shut the computer down.  Today I open up Garageband and can only hear the midi tracks of my song however other songs I have work totally fine.  Nothing is muted and I've checked everything.  Levels meters are moving on all the tracks, I can just feintly hear one guitar track.  This is frustrating. I even tried locking half of the tracks and still nothing.  I've rebooted etc and same
    I'm running Lion with a TC Konnekt 8 sound module, on a 2.4 core duo 2 MBP with 4 GB of ram

    I ran onyx and did a clean up etc then rebooted, loaded GB and same problems.  I turned on the ducking thing, everything looked ok and then once I hit play everything worked again.  I've turned off ducking and it still works.  Could this be a glitch as I've never enabled it before

  • Does anyone know how to separate a movie track from an audio track on the new Mavericks Garage band. It used to be very easy on the iLife 11 version. If anyone could respond ASAP I'd be grateful. I need to make an audio file from a video.

    I urgently need to make some audio tracks from videos using the new 2013 GarageBand. In iLife11 Garageband, this was very easy. However, I cannot see how to do it in the new one. The alternative might be to revert to the iLife11 version, so does anyone know how to do this. It's extremely urgent since I need to produce these for a court custody hearing which will take place at 0800 GMT UK time on 31st October 2013. Please help.
    Thank you.

    When you drag a movie from the Media Browser to the Time lIne in GarageBand, you will see a pop-up "Extracting Audio".
    The Movie and the audio file will appear in separate tracks. You can copy the audio region from the sound track to a different track to keep it safe and then hide the Movie track.
    Léonie

  • How to combine multiple edited audio tracks in multicam?

    I have three camera angles each of which has audio.  I would like to combine the audio from all three cameras but the challenge is that I want to edit various points in each audio track separately and synchronized with my cut points from one angle to another.  My plan was to edit the audio  in each of the 3 tracks then detach the audio from each track and recombine  by overlaying them into one audio track.  However I found that I cannot detach audio from tracks within the angle viewer where I've made my audio edits.  Is there a way to do this or is there a work around?

    I found a clumsy work around.  I used Audio Hijack Pro from Rogue Amoeba to capture the audio from FCP X  of all three camera angles.  From the Angle Editor I enabled the audio monitor for each angle and in the Timeline played all three tracks while Audio Hijack Pro recorded the combination of the thee.  This allowed me to capture all of my audio edits from the Angle Editor from each of the three tracks.  I then copied the combined audio file to the multicam project, aligned it with the multicam audio and reduced the multicam audio to essentially zero, leaving only the combined 3-track audio  that I had added. 
    This approach got me through the project but there must be a better way to accomplish this. Any suggestions?

  • Editing audio tracks?

    everytime time I edit an audio track,
    e.g. removing unwanted noise from beginning of a "live" guitar track it shifts, causing that track to be out of sync with previously recorded tracks. what am I doing wrong.
    I know why this is happening, what I dont't know is how to prevent and or correct this after the fact

    Could be you're doing the edit in the Sample Editor? Regions in the Sample Editor have a start and end, and an anchor point. The anchor point is what Logic uses to snap the region to the bar grid. Often the anchor is at the start point.
    If you trim off the beginning of a region, you could be moving the anchor to the new (later) start point, and re-snapping the region to the grid, out of time.
    Do the trimming directly in the Arrange window, and you shouldn't have this problem.

  • How do I separate a video from an audio track?

    I imported an edited .AVI file into iMovie HD. I want to reedit it, but am a complete novice. I would like to realign and edit certain audio in that file with reedited video (sorta basic editing I guess). When I drag clips into the Timeline Viewer it seems that the video and audio are one or at least inseparable. I have no idea how, or if I can, separate the audio track from the video track. Could someone please lend some guidance. Thanks very much.

    TexanMac,
    If a clip is in the timeline you can choose Advance>Extract Audio. That will place a copy of the clips audio in one of the two audio tracks.
    From there you can do what you want with it.
    Mat

  • No sound from RealTek audio card? [Solved]

    I can't hear any sound from my laptop. This is what I executed:
    pacman -S alsa-utils
    gpasswd -a yourusername audio
    alsamixer
    aplay /usr/share/sounds/alsa/Front_Center.wav
    alsactl store
    nano /etc/rc.conf
    DAEMONS=(syslog-ng network crond alsa)
    Last edited by Zdravko (2008-04-22 12:36:38)

    If I understand you correctly, you have installed all required alsa packages and tried to configure. What doesn't work is attempting to push up the volume via alsamixer/aumix etc., unmuting also does not work.
    Am I correct?
    If so, you may have a similar issue to what happened to me a ways back. Is your current kernel up to date? The problem I had involved the fact that my sound card (though it was extremely common and, well, sh*tty) was affected by a feature regression in the ALSA code and an incompatibility with kernel in what was then [current]. I had to wait for the kernel to catch up to ALSA to do anything, but the regression had to be fixed before I could do anything useful.
    Moral of the story (also known as the 'tl;dr' or 'too long; didn't read' version) - Try updating your kernel if all else has failed. If nothing useful comes out of that, try searching the ALSA site.

  • Editing audio tracks simultaneously

    I'm spending way too much time editing my video's two audio tracks (A1a, A1b) the same way twice. As an example I want to set keys on my audio to bring down the volume in places and up in other places. What I've been having to do is set keys on track A1a and do the same exact thing on track A1b. I don't want to link the two audio clips together with the video, but only link the two audio tracks together so what ever I do to one audio track will be applied to the other. However, even when I link the video to the audio tracks and adjust the audio level to one track it doesn't set that level on the sister track. I'm assuming this is something pretty simple, but I can't seem figure it out. I can get what I want by doing it twice but as you know time is a commodity.
    Thanks

    You could set the two clips as a Stereo Pair (Option L), or just make the needed changes on one clip, then when you're done,copy it and use Paste Attributes->Levels to the other clip.
    -DH

  • Why does transport bar show Midi Out activity from an AUDIO track?

    I am running Logic Pro 9 on Mac OS 10.7.5 and I've noticed lately that The Transport display is indicating Midi output signal when I have an AUDIO track engaged. This happens when I engage the Record-Enable button, while I'm actually recording, or when i merely press Play. The good thing is that it does not affect my ability to record and playback my vocals.
    I should add that this also happens when I have a Software Instrument track playing or recording (but not when only Record-engaged). I'm not sure if that's what's supposed to happen since we are dealing with midi data in this instance. I know there should be Midi-In activity, but not sure about the Midi-Out activity.
    My Audio Track is used for recording vocals from my mic input, which is a separate in put from when I'm recording the output of an external midi instrument. I have checked all of my connections, I have tested my Midi Interface and Midi controller keyboard through Audio/Midi Setup in the Utilities and everything checks out. I have not added, taken away, or replaced any software, nor hardware.
    This is very puzzling to me because as far as my limited knowledge takes me, I do not think I should have any midi activity while I'm recording from my microphone inputs onto an Audio track. Any insight would be helpful.

    There's been lots of talking in this forum about MidiO. Just do a quick search!

  • Record sound from M-Audio Firewire Solo input with S/PDIF

    Hey there, I am using a m-audio firewire solo and connect it to my mac mini 2013 with firewire cable. If I try to record sound from my guitar, it is ok, however the sound from S/PDIF input cannot be recorded. I can see the sound signal from the mac input preference, however it just cannot be played or recorded. I have searched through the forum and found some people also have the same problem but just cannot solve it. Does anyone have some idea? Thanks.

    Have you selected the correct Input pair in a stereo Logic channel strip? Standard s/pdif is a stereo signal.
    Also, the M-Audio device may have to be set to slave mode as the incoming digital signal will have to become the master digital clock for the M-Audio unit.
    The M-Audio unit should probably be set to 48kHz, it's doesn't do 96hHz does it?

  • No Sound from USB Audio

    I have a feeling this is a stupid mistake but I can't for the life of me figure out how to fix it. I had a fresh install of arch and everything worked fine, and speaker-test played fine. I installed KDE and audio still worked, but it kept giving notifications on startup like, "USB audio device has been removed", when the USB headset was still plugged in. Every once in a while I'd be stuck without sound but it would fix itself after removing and reinserting the USB audio thing. Eventually it started up with no audio; Each time the audio device is removed KDE said, "Would you like this to be removed from the device list", and this time I clicked "No" and "don't show me again". I can't figure out how to revert to "show me again". At time of writing with my USB audio plugged in, in the KDE Phonon audio system settings manager, it lists five greyed out USB headphone devices, and one colored one. I have a feeling that's the problem...
    If I start up VLC media player, for example, I can go into that program's audio device manager and select USB audio, and everything plays fine! When it plays to the default device though, no sound comes out of my headset, so I can't get audio out of most applications.
    The module is loaded:
    lsmod | grep snd_usb_audio
    > snd_usb_audio         112633  3
    I've tried the things recommended on the following thread and on the wiki, but neither have worked:
    http://archlinux.me/w0ng/2012/07/06/als … b-headset/
    https://wiki.archlinux.org/index.php/Ad … ound_cards
    (neither the manual activation or the automatic script)
    Oh, and looking at the problem on this page on the forum: I've changed the order of the devices and this hasn't helped.
    Any ideas on what's wrong, or how to remove all the dead devices it lists?
    Last edited by NeuroFuzzy (2013-06-23 16:26:32)

    to remove the other devices you have to disable them. It could be done from that window but you don't have the tab. So try installing pavucontrol and disable the other cards.
    And you have to select in asound conf to use your usb card on boot. Use the script from the wiki for that.
    Last edited by felipe (2013-07-13 15:47:16)

Maybe you are looking for