No sound from front center and

Ok so i have a Audigy 2 ZS, all the speakers are working BUT, the front center sound comes from the back right if it. When I change the jacks over I get no sound what so ever out of the sub and center speaker. HELP!!!!

What exactly are you using for your speaker system?
-Dave
[email protected]

Similar Messages

  • No sound from front, center and sub

    I've got the p7800 7.1 setup. The 4 surround speakers are the only ones producing sound. I've swapped the speakers outputs and all the speakers work fine. I've also changed the input jacks around to see if that fixes it. I tested the sound coming out of my xtreme card with headphones and it works fine. It's a pretty standard setup thats worked before. I'm not sure if the head unit partially died or what. Any assistance would be appreciated.
    Thanks

    <SPAN>i am 00% sure everything is connected correctly. When I use the Creative SB audigy 2 ZS software to test the speakers, on the "channel" buttom, i only hear sound coming from ?front left? and ?front right?, the rears and sub have no sound, I have set to ?6 channel? on the speaker control pad, and have set to 5. on Audigy 2 ZS, I had tried to disable the decoder from the sound card, but the problem still exist.<SPAN> When I set the speaker control pad to ?direct? effect on ?6 channel?, and test with the Audigy, I can hear ?front rightcenter?..all working, but when I listen to MP3 and CD, there are no sound come from the center speaker (on windows xp pro), But when I listen to MP3 and CD on Windows 98 (I have 2 systems installed on my computer), sound come from all speakers.<SPAN> Therefore, I believe that the sound card has problem running on Windows XP pro.

  • No sound from Front and Rear Center Speakers

    Hi all,
    I have a Creative 6.1 6700 speaker set + Creative Sound blaster Audigy 2 ZS.
    Recently I have noticed that I am not getting any sound from my Front and Rear center speakers. The sound is being diverted to the sub woofer. Wehn i run checks the sound comes from the sub woofer rather then the speaker. I have checked all connection and checked all wiring. All Speaker are working fine and none is dead.
    I have uninstalled and reinstalled the drivers and then application but still no good. I am unable to figure out why this might be happening. Any help is greatly appreciated.
    Also any idea why does the creative driver keep on crashing. It is one of the most unstable driver that I have seen. I have the latest driver and usually keep it up to date but still it does keeps on giving problems regularly.
    I have to say that till now the creative product has been a headache for me but I would have to make do with what I have. So all help needed here really.
    Regards,
    Amit

    Hi Guys,
    I would really appreciate if somebody could reply to my query. Its been very frustating here.
    In the meanwhile I have done the following troubleshooting more :
    1) Took a head set and connected to all ports at the back of the sound card. Sound is coming from there.
    2) Went ahead and removed the creative drive and the application.
    3) did a search in the registry with the keyword as "Creative". Removed all entries that were found.
    4) Reinstaled the latest drivers and the application.
    5) Tried he card ina different PCI slot.
    But everything has been to no avail. There is still no sound from the rear and front center speakers. Its really driving me nuts.
    It seems as if the souncard is passing the signal to the sub woofer but it is not directing it to both these channels.
    Any help would be deeply appreciated.
    Regards,
    Amit

  • TX2000 no sound from front headphone jacks

    Hi everyone, Ive started this because I have a major problem with my pavilion tx2000. it is not outputting any sound from the front headphone jacks, it was working okay on windows 7 64 bit but one good day without any aparent reason it stopped working I mean, I used to plug my headphones and immediatly the laptop speakers shout and I coud hear music from any of the two front headphone jacks but one day I did it and the speaker didnt shout and I couldnt hear anything from the headphones, assuming that the headphones were the problem I plugged another headphones that I knew were working fine with the same result.
    I was using windows 7 default drivers then I updated the drivers from the official realtek site (I thnk version R267) with no effect, then I installed linux and plugged the headphones, to my surprise audio were outputting from both, the laptop speakers and the headphones, after some configurations I managed linux to output audio only from the headphones but I have to change it manually if I wanted the laptop speakers to work, I then reinstalled windows 7 64 with the updated driivers from realtek, to my surprise realtek audio manager will pop up a message saying "you just plugged and audio device" BUT ONLY IF I PLUG SOMETHING TO THE MICROPHONE JACK!!!!! otherwise it won´t say anything even if I plug my headphones to any of the both headphone jacks, my assumption is that somehow the headphone jacks lost its sensibility and are not detectng the headphones and as so they wont route the audio signal through them, also Ive read on forums that I could change something in the realtek audio manager as "disable front audio jacks" or something but i can´t see that option anywhere in any of the various versions of drivers I´ve tried on the various OSes Ive tried, Also in some point I did notice a red ligth coming out from the first headphone jack, I assumed it was spidf signal or something.
    What im thiking is that this is hardware related, that somehow the jacks lost sensibility and cant detect my headphones, the question here is this: I dont mind routing the audio from the laptop speaker to the headphone jacks manually (I mean with some script or something), but is there any way to do so In windows, In linux I could but in windows I just cant seem too get it to work without windows detecting my headphones automatically, or do I have to change the whole front panel in my laptop, it is offcourse out of warranty and I don´t want to keep spending money on this as this is quite an old machine wich Ive invested way too much.
    THANK YOU ALL IN ADVANCE.
    HP Pavilion TX2000 (tx2032la)
    Windows 7 Ultimate 64-bit
    NO sound from front headphone jacks.
    No hardware changes made.

    Oh and one more thing:
    In the Audio tab in Sounds and Audio Devices in Control Panel, it has this option of
    "Use only default devices"
    Is it OK to check that?
    Does that mean that if I choose Audigy 2 for the sound playback and etc. options, it would "lock" the default as Audigy 2?
    Because as I said, I don;t want to go back and forth switching from onboard to Audigy over and over.
    I just want Audigy as my sound, and be able to use the headphone jack on the front bevel of my computer.

  • I cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.

    i cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.

    Did you already reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can cure some glitches.
    If this does not help, try to set it up as new device, explained here:
    How to back up your data and set up as a new device

  • I need to do sap sd certification ,training for same is very costly from authorised center and i canot afford ,the other way is i do training from unauthorised center and take certification exam in any country where prerequisite is not doing training

    i need to do sap sd certification ,training for same is very costly from authorised center and i canot afford ,the other way is i do training from unauthorised center and take certification exam in any country where prerequisite is not doing training from authorised center.how good it it to do prepare from unauthorised center and take exam in any country like australia ,US ?please help understand .

    Hi Preeti,
    please first understand the difference between a subject (your header) and its body line, please never write so long subject matter.
    Now coming to your queries , what you thinks being at Australia or US is free of Cost. The first thing is that i don't understand your mission for taking Certifications, Are you a working proffesional because for more than 2 yrs. of working experience, you don't need any training , you can take direct examinations.
    And if you are not a working professional, i don't thing taking any certification will serve any purpose in your job hunt, although it will enrich your Resume only, you will nothing get out of this from just taking a vertification
    So, please tell us that you are a fresher or having real time working exposure in SAP SD module, then any one will guide you well.

  • When I plug my headphones in the my laptop I still have sound from my speakers and headphones

    Hello, I'm having trouble with the sound on
    my laptop and it's only just started to happen.
    When I plug my headphones in the my laptop my speakers don't get muted, So I
    have sound from my speakers and headphones at the same time.
    I've reinstalled the drivers and this didn't work, So I'll hoping you can help me.
    HP Pavilion g6 Notebook PC, Product number A8M62EA Windows 7 64-bit

    Here's the trick (and it's been verified on 3 other Win 7 systems):
    1) R click on your speaker icon, select 'Recording Devices' (if you have the sounds dialog up, it's the 2nd tab 'Recording')
    2) R click in the white space, be sure that BOTH "show disabled devices" AND "show disconnected devices" are checked.
    3) **Now this step is going to take a little bit of thought for each computer being used: on my laptop (HP Elitebook) I get a device "Stereo Mix", ENABLE this device.
    4) Click on Properties, go to the tab 'Listen'
    5) Check the box "Listen to this device", also change the drop-down box below "Playback through this device" to be your second audio device
    -- To verify that you've done this correctly, go back to the Sound dialog tab Playback, you should now see both of your audio devices showing the little green graphs moving.
    Here are the specific settings that I have on my laptop, maybe this will help with your settings:
    Speakers- GN9350 (Default Communications Device)
    Speakers- SoundMAX Integrated Digital HD Audio (Default Device)
    Stereo Mix- 'Listen' feature points this  device to my GN9350 headset.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • No sound from front centre speaker and sub

    I have an Audigy 2 with Creative Inspire 6700 speakers. I have a problem where there is no sound from either the front center speaker or the sub. If I test it with Speaker Setup in Control Panel there is no sound on those two speakers.
    Has anyone got any suggestions please?

    I have this issue aswell - but do not exspect any help, support from this forum.
    This company is crap, I hate them.. They will NEVER be getting a penny from me. The only reason I come here is b/c? I paid a lot of money for my card, and I'm hoping one day for a fix...

  • Sound from front speakers only

    I am using optical audio with Sony DAV-DZ810 home theater and my Apple TV2. The system is new and I am not very familiar. When I watch a trailor (have not watched a movie yet) on ATV2, I notice that sound only comes from two front speakers only. No sound is heard from center and rear speakers.
    Can anyone please advise?

    Normal.
    Trailers do not usually have 5.1 surround.
    Not all movies have 5.1 surround either - it should say or show the dolby icon on the movie preview screen and once you choose to rent it often says you are renting film x which has surround surround (or something like that).
    AC

  • No sound from front right/left speakers in 5.1 setting SB Audigy 2 ZS

    Dimension 550/E50
    XP Media Center 2005
    All current Windows Updates (SP3 & all MCE updates)
    5. surround sound was working fine until some software changes took place (however, I dont know which was directly related)
    A) Intel Chipset update from A to 7.2.2.006, A3
    1. It fixes issue with USB keyboard/mouse hang until reboot while installing.
    2. It fixes yellow bang in USB controller in Device Manager on a system with USB keyboard/mouse while installing.
    3. It fixes a bug where a 3rd party SMBus driver was being overwritten.
    4. It fixes Installshield issue with silent mode.
    5. It fixes issue in PCIUtility.sys during install on 64-bit OS.
    6. It fixes untranslated language strings.
    B) Some Microsoft AutoUpdates
    didn't discover the loss of front speakers until several updates had run. Restored back to December 08 without any improvements.
    After the chipset update, I de-installed all SB and Sigmatel drivers
    Then Re-installed the SIGMATEL STAC 92XX C-Major HD Audio driver
    and then re-ran the SB Installation CD
    still, no front r/l sound
    then, i ran the Creative AutoUpdate application and installed recommended updates.
    still no sound front l/r --
    i switched the rear l/r cable with front, so i know the speakers are fine.
    what else can i do
    how can i tell if the sound board is faulty
    Message Edited by lunde on 04-8-2009 08:32 PMMessage Edited by lunde on 04-8-2009 08:34 PM

    I used the Creative Diagnostic application's Speaker Test and after hitting Restore Defaults, the front right speaker is not as quiet, though still much quieter and muffled. Still no sound from the subwoofer.

  • T7900 7.1 No Proper Sound On Front Center with Audigy 2 Va

    I've had these inspire 7. speakers for about 4 years now, bought this audigy value 7. sound card on saturday, and the front center speaker, wont produce sound, and when im playing games, i get Very Low distorted sound from it, so i cant hear the sound in games properly.
    i have swapped the front center speaker around with the front right one, and the speaker itself is working fine, im sure the fact i have no tone (bass/treble) control,?is the issue, because the speakers all work fine with my onboard sound and my old Audigy 5. SE, messing with the graphic equalizer also does nothing.
    the software and drivers are fully updated for the sound card, and everything else is also upto date on my system.
    im running XP Pro' SP2
    P4 Northwood 2.8Ghz
    2048 Dual Channel DDR 3200
    ABIT IC7 Mobo'
    Any Help PleaseMessage Edited by Samwise47 on 04-8-2008 0: AM

    *Update*
    i've just installed one of my favorite games, that does in fact support 7.,?and its still the same, also still the same with a dvd i played last night..
    ?only solution is to set my speakers to 4. mode, but why should i have to do that, and why has no one replied to my post??

  • Audigy 2 ZS with 5.1, very low volume from front center spea

    I have an Audigy 2 ZS and Altec Lansing 25CN speakers (5.). The sound comes out fine from all but the front center speaker, from which I can barely hear anything. However, if I run the Creative Diagnostic and test the speakers, the sound comes out just fine. Tests in the THX Console work fine too. Anyone have an idea what's going on?

    I have an Audigy 2 ZS and Altec Lansing 25CN speakers (5.). The sound comes out fine from all but the front center speaker, from which I can barely hear anything. However, if I run the Creative Diagnostic and test the speakers, the sound comes out just fine. Tests in the THX Console work fine too. Anyone have an idea what's going on?

  • Sound - No Front/Center Speakers (5.1) with Realtek HD Sound on m9500z in Win7-64 bit

    Just upgraded my new HP Pavilion quad core m9500z PC from Vista Home Premium-64 to Win7 Ultimate-64.  It has this built in Realtek HD sound card that supports 2.1, 5.1 and 7.1.  My Creative Inspire 5.1 speaker system will not play the front/center speakers (the green plug) on this PC.  The HP and MS sites quote a conflict with the HDMI video usage as the problem.  Uploaded the latest driver recommended by HP from MS, but no fix.  I am using the white rectangular plug that came with the Acer P221w monitor, not the smaller USB-like HDMI plug as the Acer monitor does not give that option.  I would hate to go back to a serial video interface to get the sound right.  Any suggestions?  (Never tested the speakers in Vista before upgrading since I upgraded out of the box.  They worked great on my old XP box.)

    Here is a guide for "No Sound from the Speakers in Windows 7".  See if it helps you solve your problem.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • 5.1 system, only sound from front left & ri

    I'm running a x-fi platinum on vista home premiumif you need/want more specs than that, just let me know. my problem is thus, I've set the system up for 5. surround sound, I've tested the speakers and I'm only able to recieve sound to the front left and right speakers. No sound is being sent to the center, rear left or right. I'm unsure of what to do, I've read that there are other users who arent having any problems with their 5. systems and I'm hoping someone here can give me some advice on what to do. Thanks

    lol wow I Just fixed it by accident. heres a screenshot of how.basically, whatever speakers were not getting sound, you uncheck them. its crazy but it works?*edited twice trying to get the pics to show up in the post *http://img.photobucket.com/albums/v4...nxx984/prt.jpghttp://img.photobucket.com/albums/v4...xx984/prt2.jpg?Message Edited by FleshWound on 02--2007:34 AM

  • No sound from front or read audio jack

    I am using an 810-230qe Phoenix Envy with WIndows 8.1 Pro. I am unable to hear sound from the front headphone jack or the rear audio jack. Speakers also do not work from the rear jack. I have an HDMI cable connected to my monitor, however, I went into the NVIDA controls and disabled sound for that. 
    I have uninstalled the driver and then reinstalled. No luck with either jack. Headphones work in all other devices. I have even tried different headphones. This is a new computer, just a few days old and this is the first time I tried to use sound. 
    Any ideas?

    Hello aloehnert,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having audio issues on your HP ENVY Phoenix 810-230qe CTO Desktop PC. You stated that you disabled the audio on your monitor does that mean it worked before you disabled it? Has the audio ever worked on this and is just not working now? If you go to the control panel and click on Sounds what devices do you see there and are they Enabled or Disabled?
    If you could answer these questions it would help a great deal in getting you  a possible solution. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for