No sound from front centre speaker and sub

I have an Audigy 2 with Creative Inspire 6700 speakers. I have a problem where there is no sound from either the front center speaker or the sub. If I test it with Speaker Setup in Control Panel there is no sound on those two speakers.
Has anyone got any suggestions please?

I have this issue aswell - but do not exspect any help, support from this forum.
This company is crap, I hate them.. They will NEVER be getting a penny from me. The only reason I come here is b/c? I paid a lot of money for my card, and I'm hoping one day for a fix...

Similar Messages

  • Sound from front right speaker not working, playing out of le

    I have a Soundblaster X-Fi Fatalty and it'ss a little under year old with all current drivers. The front right speaker plays no sound but the front left speaker plays what is supposed to come out of the front right. I have it set on the 5. surround sound but it doesn?t work on any other settings. A week ago everything was working fine I have not installed anything new since then. I'm not sure if this is a hardware problem or something set wrong on my computer. Does anyone have a solution or know what may be causing this? Also I checked the speakers, they work fine.Message Edited by Nowise0 on 0-04-2006 03:52 PM

    I ghave this same problem with an XFi Elite pro card and a 5. speaker system. To get sound coming out all 5 correct speakers and subwoofer i have to select 7. speaker set up then 5., then 6. and finally 5. again then it works fine - I have to do the selection in THX from game consule mode to get it to work.

  • Nothing from my rear speaker and sub using VISTA with SB X-Fi Xtreme Noteb

    I know many people have problems with audio not coming out of their rear speaker. I can't seem to even get sound from the diagnosis tests. All I hear is sound and noise coming out of my front speakers and nothing else. Is this a Windows Vista driver problem?

    I don't know if this is going to help or not..
    . Is on-board sound disabled in the bios?
    2. Have you gone through the Win XP control panel playback and recording settings to make sure microphone isn't disabled?
    3. Is digital line-in disabled?
    4. In the Soundblaster Control Console you've selected mixer and then selected line-in 2 / mic 2 by clicking on the "rec" slider?
    Good luck.

  • I AM GETTING NO SOUND FROM MY RIGHT SPEAKER AND ALL VOLUME LEVELS ARE TURNED UP

    I HAVE CHECKED ALL VOLUME CONTROL SETTINGS AND BOTH RIGHT AND LEFT SPEAKERS ARE BALANCED AND TURNED ON 100% BUT WHEN I TEST THEM, I ONLY GET AUDIO OUTPUT WITH THE LEFT SPEAKER, AND NOTHING FROM MY RIGHT.  I HAVE AN HP PAVILLION G7 RUNNING WINDOWS 7.

    I have tried all the above and nothing seems to work. Any other suggestions?

  • TX2000 no sound from front headphone jacks

    Hi everyone, Ive started this because I have a major problem with my pavilion tx2000. it is not outputting any sound from the front headphone jacks, it was working okay on windows 7 64 bit but one good day without any aparent reason it stopped working I mean, I used to plug my headphones and immediatly the laptop speakers shout and I coud hear music from any of the two front headphone jacks but one day I did it and the speaker didnt shout and I couldnt hear anything from the headphones, assuming that the headphones were the problem I plugged another headphones that I knew were working fine with the same result.
    I was using windows 7 default drivers then I updated the drivers from the official realtek site (I thnk version R267) with no effect, then I installed linux and plugged the headphones, to my surprise audio were outputting from both, the laptop speakers and the headphones, after some configurations I managed linux to output audio only from the headphones but I have to change it manually if I wanted the laptop speakers to work, I then reinstalled windows 7 64 with the updated driivers from realtek, to my surprise realtek audio manager will pop up a message saying "you just plugged and audio device" BUT ONLY IF I PLUG SOMETHING TO THE MICROPHONE JACK!!!!! otherwise it won´t say anything even if I plug my headphones to any of the both headphone jacks, my assumption is that somehow the headphone jacks lost its sensibility and are not detectng the headphones and as so they wont route the audio signal through them, also Ive read on forums that I could change something in the realtek audio manager as "disable front audio jacks" or something but i can´t see that option anywhere in any of the various versions of drivers I´ve tried on the various OSes Ive tried, Also in some point I did notice a red ligth coming out from the first headphone jack, I assumed it was spidf signal or something.
    What im thiking is that this is hardware related, that somehow the jacks lost sensibility and cant detect my headphones, the question here is this: I dont mind routing the audio from the laptop speaker to the headphone jacks manually (I mean with some script or something), but is there any way to do so In windows, In linux I could but in windows I just cant seem too get it to work without windows detecting my headphones automatically, or do I have to change the whole front panel in my laptop, it is offcourse out of warranty and I don´t want to keep spending money on this as this is quite an old machine wich Ive invested way too much.
    THANK YOU ALL IN ADVANCE.
    HP Pavilion TX2000 (tx2032la)
    Windows 7 Ultimate 64-bit
    NO sound from front headphone jacks.
    No hardware changes made.

    Oh and one more thing:
    In the Audio tab in Sounds and Audio Devices in Control Panel, it has this option of
    "Use only default devices"
    Is it OK to check that?
    Does that mean that if I choose Audigy 2 for the sound playback and etc. options, it would "lock" the default as Audigy 2?
    Because as I said, I don;t want to go back and forth switching from onboard to Audigy over and over.
    I just want Audigy as my sound, and be able to use the headphone jack on the front bevel of my computer.

  • No sound from integrated loud speaker

    Hi,
    I have no sound from integrated loud speaker, only if I use my headset, I can hear something. There is no red light, so should be a software issue. When I restart the mac, I hear the start sound. I already reseted the PRAM, didn't help. I installed OS X Lion 10.7.4 and did the software updates.
    Any idea? Thanks!

    Reset SMC.   http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If that does not help, contact Apple.

  • I have a 30 Gig 5th Gen IPOD It plays but there is no sound from the head phones and when its docks can anyone help

    I have a 30 Gig 5th Gen IPOD It plays but there is no sound from the head phones and when its docks can anyone help

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • No sound from front, center and sub

    I've got the p7800 7.1 setup. The 4 surround speakers are the only ones producing sound. I've swapped the speakers outputs and all the speakers work fine. I've also changed the input jacks around to see if that fixes it. I tested the sound coming out of my xtreme card with headphones and it works fine. It's a pretty standard setup thats worked before. I'm not sure if the head unit partially died or what. Any assistance would be appreciated.
    Thanks

    <SPAN>i am 00% sure everything is connected correctly. When I use the Creative SB audigy 2 ZS software to test the speakers, on the "channel" buttom, i only hear sound coming from ?front left? and ?front right?, the rears and sub have no sound, I have set to ?6 channel? on the speaker control pad, and have set to 5. on Audigy 2 ZS, I had tried to disable the decoder from the sound card, but the problem still exist.<SPAN> When I set the speaker control pad to ?direct? effect on ?6 channel?, and test with the Audigy, I can hear ?front rightcenter?..all working, but when I listen to MP3 and CD, there are no sound come from the center speaker (on windows xp pro), But when I listen to MP3 and CD on Windows 98 (I have 2 systems installed on my computer), sound come from all speakers.<SPAN> Therefore, I believe that the sound card has problem running on Windows XP pro.

  • No sound from Front and Rear Center Speakers

    Hi all,
    I have a Creative 6.1 6700 speaker set + Creative Sound blaster Audigy 2 ZS.
    Recently I have noticed that I am not getting any sound from my Front and Rear center speakers. The sound is being diverted to the sub woofer. Wehn i run checks the sound comes from the sub woofer rather then the speaker. I have checked all connection and checked all wiring. All Speaker are working fine and none is dead.
    I have uninstalled and reinstalled the drivers and then application but still no good. I am unable to figure out why this might be happening. Any help is greatly appreciated.
    Also any idea why does the creative driver keep on crashing. It is one of the most unstable driver that I have seen. I have the latest driver and usually keep it up to date but still it does keeps on giving problems regularly.
    I have to say that till now the creative product has been a headache for me but I would have to make do with what I have. So all help needed here really.
    Regards,
    Amit

    Hi Guys,
    I would really appreciate if somebody could reply to my query. Its been very frustating here.
    In the meanwhile I have done the following troubleshooting more :
    1) Took a head set and connected to all ports at the back of the sound card. Sound is coming from there.
    2) Went ahead and removed the creative drive and the application.
    3) did a search in the registry with the keyword as "Creative". Removed all entries that were found.
    4) Reinstaled the latest drivers and the application.
    5) Tried he card ina different PCI slot.
    But everything has been to no avail. There is still no sound from the rear and front center speakers. Its really driving me nuts.
    It seems as if the souncard is passing the signal to the sub woofer but it is not directing it to both these channels.
    Any help would be deeply appreciated.
    Regards,
    Amit

  • Playing back Recorded TV Programs using Windows Media Player and only hearing Sound from Front Speakers

    Hi All,
    I have Windows 7 Ultimate 64-Bit Service Pack 1 with Windows Media Player 11 installed.
    When I click on one of my Recorded TV Programs to watch and hear, I can only hear the Sound coming from the Front Speakers.
    When I right-click on the Program and open it up in Real Player Cloud. I can indeed watch the program and hear Clear Sound coming from all 5 Speakers plus the Subwoofer.
    What setting do I change to use Windows Media Player and have sound coming from all 5 Speakers and the Subwoofer?
    Thank you!
    thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

    Hi Andreas,
    Thanks for the reply.
    The link you put up, takes me to the page, but
    "The requested URL /surround/www_lynnemusic_com_surround_test.wma was not found on this server."
    That was WaterFox.
    The webpage cannot be found
    This in Internet Explorer 11.0
    The Files in question were Recorded by Beyond TV to my Local Hard Drive.
    When I open the recording in Real Player Cloud, installed on my computer, not streaming over the Internet, I hear it correctly played.
    When I use Windows Media Player, nothing can be heard from the Rear Speakers.
    Speakers and Hardware are working fine.
    thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

  • Can you have sound coming out from both internal speaker and speakers connected to the iMac?

    I have a pair of KRK Rokit 5 speakers connected to the headphones jack at the back of the iMac.
    I use these for playing good quality sound when I need to record on Garageband.
    However they are mains powered and have a switch at the back which is difficult to always turn due to the position of the speakers. At the same time I don't want to have the speakers turned on all the time.
    Is there a way to enable the Mac to play sound through its onboard speaker without disconnecting the speakers' cable?
    Thsi should be possible, becasue whenever I restart the Mac I can hear it s start up jingle clearly coming out from its onboard speaker, even when the external speakers are plugged in.
    Thanks

    Unfortunately the iMac is not designed to offer that setup capability.  If you go into your Applications folder>System Preferences>"Sound">here you will find that you can select the device that the iMac's sound output is sent thru (see below)>you will find that you can only select "one" device at a time to receive the audio signal, not multiple devices at once.  The "startup chimes" are separate from the normal audio output and Always come from the internal speakers.

  • Audigy 1 PCI card, only have sound from right side speak

    hi guys and gals, I'm thinking my audigy has finally kicked the bucket as i only get sound from of the two side channels, its not a cable or speaker issue, and can find no loose connection or burn through on the card, anyone had this problem is there some simple fix or should i just buy a new card :P
    Cheers
    Raiden

    Wow, so after testing it in linux and not working, i thought to myself definitely something in the connections.
    So I look at the sub/rear/front connectors and decide to just disconnect and reconnect them. Surely, enough the rear connector on the soundcard wasn't in all the way hence the only rear speaker working.
    Well after spending a day on this and finding the very simple fix all i can say is DOH

  • No sound from front right/left speakers in 5.1 setting SB Audigy 2 ZS

    Dimension 550/E50
    XP Media Center 2005
    All current Windows Updates (SP3 & all MCE updates)
    5. surround sound was working fine until some software changes took place (however, I dont know which was directly related)
    A) Intel Chipset update from A to 7.2.2.006, A3
    1. It fixes issue with USB keyboard/mouse hang until reboot while installing.
    2. It fixes yellow bang in USB controller in Device Manager on a system with USB keyboard/mouse while installing.
    3. It fixes a bug where a 3rd party SMBus driver was being overwritten.
    4. It fixes Installshield issue with silent mode.
    5. It fixes issue in PCIUtility.sys during install on 64-bit OS.
    6. It fixes untranslated language strings.
    B) Some Microsoft AutoUpdates
    didn't discover the loss of front speakers until several updates had run. Restored back to December 08 without any improvements.
    After the chipset update, I de-installed all SB and Sigmatel drivers
    Then Re-installed the SIGMATEL STAC 92XX C-Major HD Audio driver
    and then re-ran the SB Installation CD
    still, no front r/l sound
    then, i ran the Creative AutoUpdate application and installed recommended updates.
    still no sound front l/r --
    i switched the rear l/r cable with front, so i know the speakers are fine.
    what else can i do
    how can i tell if the sound board is faulty
    Message Edited by lunde on 04-8-2009 08:32 PMMessage Edited by lunde on 04-8-2009 08:34 PM

    I used the Creative Diagnostic application's Speaker Test and after hitting Restore Defaults, the front right speaker is not as quiet, though still much quieter and muffled. Still no sound from the subwoofer.

  • No sound from 5.1 speak

    ??Hi. I bought some new 5. speakers and get test sound only from the left front speaker and minimal sound from all the speakers when playing music. I have a xifi soundcard and have set them up as 5. speakers in the control panels. Can anyone help me get full sound from all of them.

    ?I have the logitech x-540 and the same problem with this guy and have done the same things to solve it but with no result:?http://forums.creative.com/creativel...id=0762#M73445?The connection with the sound card is via three colour coded cables, green on green, orange on orange and black on blue from the sound card since there is no black slot.

  • I can't hear sounds from my ipad speaker

    I just bought Ipad mini last 2 weeks....since I have bought ...I can not hear sounds from speaker.
    It always shows "headphone" mode....Why?
    Technician tried to restore but not work....What is your suggestion?
    Thank you.

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for