No sound from GB over Bluetooth connection

The function to perform sound of Garageband over Bluetooth doesn't work well!
The I-pad settings to play sound over BT are correct.
The pairing with my (bluetooth) VOIIS gateway was succesful.
Music (sound) from my I-Pad (i.e. Music APP) is transmitted correct to my amplifier through this device.
The special setting in Garageband have been done ( sound over Bluetoorth/HDMI)
however the sound of Garageband over Bluetooth is not transmitted to my BT device.
Without Bluetooth setting it is working well (sound from I-pad speakers (i should say squeeckers ))

The problem is solved!
I did what you suggest a couple of times, but i had no luck.
What might have somehow fixed the problem: I opened iWeb, and then previewed a GB song to import. It played great.
Then I opened GB and everything worked...
Strange.
Thank you all for your help anyway!

Similar Messages

How to get sound from phone when bluetooth connected

Easily paired my Plantronic bluetooth headset - piece of cake. However, if I'm not on the phone, I don't keep it on my ear. Sounds, except phone ringing, only come thru the headset whe it is on. I would like to hear the other sounds (i.e. notifications, text message alerts, other alerts) from the phone when my bluetooth headset is connected. It would be a pain to have to turn the headset on/off just to hear anything from the phone. I actually missed a meeting as the phone made no noise for my calendar reminder.
I would like the option of routing the tones/alert sounds to either phone or headset or just have it automatically do both.
Thanks
lawashbu

Im afraid that disconnecting your blue tooth devise would be the only answer to your problem im afraid that is the only way
Hope this helped
Freddie

HT5517 In multiple Apple TV's installation how can one prevent one iOS device from taking over the connection of another iOS device?

I am working on a system design where I would like to install 5 Apple TV's so when clients walk in with their iPhones they can connect to the network and be able to stream their audio to facility zone speakers where they will be working. But I am looking to prevent others from taking over that connection. I have never installed multiple Apple TV's in one site but I assume one would name them differently (Apple TV 1 - 5) when setting them up. I am also assuming when I walk in with my iphone and use the airplay I would see all 5 Apple TV's listed. Once I choose Apple TV 1 for instance, I do not want others to walk in and see Apple TV 1 on the list any longer so they do not have the oportunity to select it inadvertantly. Is this doable?

You can't remove them from the list, but you can set a password for airplay to each Apple TV

No sound from tv after laptop connected (G60)

Hi
It is no sound from TV, after i connecting my laptop to tv through hdmi cable on hdmi port 1.
However, the image looks ok.
I open the sound control panel, see NIVDIA HDMI OUTPUT SEEMS WORKING, (SET DEFAULT), BUT THE VOLUME IS VERY LOW, AND NO TEST SOUND COMING OUT FROM TV EITHER.
I tried to set up the audio system in NIVDIA control panle under VIDEO AND TV as instruction in HELP of NIVDIA help manual. But i just cannot find the audio system set up.
anyone can help on this,
Very appreciated!
Tnx
My email is
[text removed for privacy]

Try this, it works on my PC:
Connect HDMI cable to TV.
In the Control Panel, select "Sound" by double-clicking it.
Click the "Playback" tab and look for an icon for your television.
Highlight the TV icon and then select "Set Default". A green checkmark should appear on the TV icon.
You should now hear sound from the TV when your HDMI cable is connected, and sound from your PC when the cable is not connected.
Marty
dm4t i5-430M 4GB-RAM IntelGraphics

How can I send sound from microphone to Bluetooth speakers?

How can I send sound from microphone to Bluetooth speakers? They work from the music app but not from an internal or external microphone. Is this a setup issue or is there a work around?

I don't know of any way to do that.

Right side sound only works over Bluetooth and headphones

Yonly the right speaker works over Bluetooth and headphones. How do I get my left speaker back?

Turn off Mono audio.
Settngs > General > Accessibility > Mono Audio > Off

Unwanted image added to song when sent from computer over bluetooth

When I send a song from my mac mini to my One via bluetooth--it adds an image from my computer that is not part of the mp3 file as the thumbnail for the song in "media." How can I stop this? Thanks for any help

Hi Kevin, thanks for the response.
I've done it three or four times, every time it adds the same photo, but it
is just one of many from my computer and I have no idea 1. why any image is
added, or 2. that image in particular is added. I don't want any
thumbnails, just the song!
The obvious workaround is to transfer via usb which worked, but I like
bluetoothing sometimes...
thanks
>>Personal information removed to comply with the Verizon Wireless Terms of Service<<
Message was edited by: Verizon Moderator

Can I sinc 4s over bluetooth connection with computer

want to know if I can sync with iTunes over a bluetooth connection

No, but you can via wi-fi with iOS 5.

Print from iPad over Bluetooth Printer there is a way?

I want to develope an App that will detect the Bluetooth Printer (NearBy) and then will print it.

As of now the iPad does not support using Bluetooth printing; without a change by Apple to the OS there is no way to allow this.

No 5.1 sound from Elite HPE-575a with Logitec X-530

Controller is IDT High Definition Audio CODEC.
Speakers/Headphone Properties, General Tab - Jack information does not match the actual inputs/outputs on back of PC.
Properties screen shows LR,LR, C Sub, RL RR -4 Jacks
Actual on PC has 6 jacks - in, out, mic, c/sub, rear, side
Connected by color code matched jacks and plugs, matched labelling, I.e. c/Sub in c/sub, rear in rear, Side in side.
I only get sound from center speaker and sub. Ideas? Suggestions?

This behaviour is by design:
SPDIF Digital Connections only carry 2 PCM signals, which means only stereo.<
Technologies like Dolby Digital/DTS and there PC-oriented Li've versions encode 5. signals into the 2 channels offered by the SPDIF standard. This is not supported in any Sound Blaster card at the moment.<
The receiver of your speaker system must support Dolby/DTS and decode it into PCM before it can be played back. (I assume, the GD-series Inspires, do that)<
As a result, you can only get 5. sound from a single SPDIF connection only when listening to Dolby Digital/DTS content, like DVDs and .ac3 files, and you select offcourse? SPDIF passthrough in either the DVD software or Creative's drivers.<

No sound from the speaker and missing speaker device listed with Window 7

I have Window 7 and with SB X-Fi card installed for a long time now but yesterday, there is no sound from the speaker which connected to the normal speaker output of the card. I check the output device and the specker device is missing. I tried to run the software but it says no device.
How do I correct the problem?
Thank you.

Take it to your local Apple Store along with US$149 for a replacement.

Suddenly no sound from speakers and only from headphones

Hello,
I have a HP 8440p VQ664ET#ABU Elitebook laptop running Windows7 64bit pro.
Since today I'm experiencing the following problem:
1) no sound is heard through speakers when headphones are disconnected.
2) If I connect the headphones, the sounds are heard correctly through them: this is the expected behavior
I don't think it's a speakers hardware problem because I can make the speakers play sounds for one or two seconds like this: while a sound is being played, such as music file for instance, if I move up and down the headset volume cursor (regardless if headphones are connected or not) I can hear the played sound through the laptop speakers for a few seconds, after which the speakers mute again.
So to summarize:
1) Headphones disconnected: no sound from speakers
2) Headphones connected: sound from headphones
I rebooted, suspended and restored without any luck so far.
I'm under the impression that there might be a problem with the headphone jack: it is like the laptop always thinks that the headphones are connected and therefore cuts the output to the speakers.
Any clues?
Thanks
Sergio

Try installing the sound drivers from the following weblink:
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59649.exe
If the issue persists, try the troubleshooting steps mentioned in the following weblink:
HP Notebook PCs - No Sound from Speakers (Windows 8)
Offers tested solutions that begin by identifying the exact issue, and then adjusting the settings that will resolve the majority of sound problems on a notebook running Windows 8.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

How do I transfer music from my iPod to my iPad? Thought I could do it over bluetooth but seems they won't connect.

How do I transfer music from my iPod to my iPad? Thought I could do it over bluetooth but seems they won't connect.

jalsie wrote:
How do I transfer music from my iPod to my iPad? ...
By using iTunes on your computer...Syncing with iTunes

When booting up, the bluetooth connects and then disconnects with my trackpad 3 or 4 times then i get a gray cover over the desktop that drops from top to bottom then a window that tells me to use the power button to do a forced shutdown.

when booting up, the bluetooth connects and disconnects with my trackpad 3 to 4 times and then i get a gray sheet that drops down from the top to bottom of the desktop then a box in the center that tells me to use the power button to do a forced shutdown. wireless keyboard connects with no problem. went to the apple store and they replaced the bluetooth card. still have the same problem. removed the batteries from the trackpad, strted up and no problem connecting with wireless mouse and keyboard. anyone else experience this?

This could be a software/state problem or a hardware problem. Here are steps to resolve the former.
http://support.apple.com/kb/TS2570
https://discussions.apple.com/docs/DOC-5282

No sound from Bluetooth speakers on HP Envy PC

I have paired my HP Envy 700-215xt PC via bluetooth to UE Mini Boom speakers. The bluetooth device list shows the speakers paired but no sound is coming out of the speakers. Volume is up and bluetooth hands free audio is checked as default. Can nott figure out how to get sound out of the speaker(s).
Also noticed my logitech wireless mouse and keyboard now suddenly not working as well (after I paired the bluetooth speaker). Keyboard and mouse not connecting as well.

Hello @jhansontx,
I have read your post on how you are not able to pair your UE Mini Boom speakers or any other Bluetooth device to your desktop computer, and I would be happy to help you!
To enable your system to recognize and pair with your Bluetooth devices, I recommend following the steps below:
Step 1. Go to device manager
Step 2. Right click on "Bluetooth Peripheral Device" that you want
Step 3. Select "Update Driver Software..."
Step 4. Choose "Browse my computer for driver software"
Step 5. Choose "Let me pick from a list of device drivers on my computer"
Step 6. Select "Ports (COM & LPT)"
Step 7. Select "Microsoft" at "Manufacturer" list
Step 8. Finally select "Standard Serial over Bluetooth link"
If you are still unable to pair with a Bluetooth device try the following:
Step 1. Search for "Change device" in the Windows 8 Start menu.
Step 2. Click on where it says Change device installation settings.
Step 3. Select the No, let me choose what to do option.
Step 4. Check the automatically get the device app option
Step 5. Click Save changes to save the settings you just chose
As well you can try this:
Step 1: Go to RUN (Windows Logo + R) and type “services.msc” and Enter
Step 2: Now find “Bluetooth Support Service” and double click on it
Step 3: Now click on Log On Tab and Type in "Local Service" without quotes
Step 4. Click on “This Account”
Step 5: Now remove any passwords leave the password field blank
Step 6: Underneath the upper left title should be a hyperlink "Start"
Step 7: Click "Start"
You can also check the Power Management tab and unchecked the box that said "Allow the computer to turn off this device to save power."
If you are still not able to pair your devices to your computer, To ensure your HP Support Assistant software is functioning correctly, I recommend re-installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

No sound from GB over Bluetooth connection

Similar Messages

Maybe you are looking for