No sound from H67ma-e35 (b3)

I've tried both 64 bit and 32 bit version of Windows 7
As soon as the driver kicks in I hear a faint hissing sound that is modulated a bit when a system sound tries to play.
I tried updating the bios to 11.4 from 11.3.
I tried disabling the C-State cpu feature.
I was able to get sound from a Creative Labs USB sound card.
I wonder if the MB is defective. Would a replacement motherboard fix the problem?

I'm using Headphones rather than speakers. I have 2 different pairs of headphones and both give the same result.
I've tried the ones on the cd that came with the MB (6.0.1.6299), and I've downloaded and installed the drivers from the MSI web site (6.0.1.6316) as well as the default windows drivers.
I also tried another install of the 32bit version of Win-7, in case there was a problem with the 64bit drivers.
The volume slider has no effect on the volume of any sound currently produced.

Similar Messages

H67MA-E35 (B3) emitting high-pitched whine/chirp

I am getting a high-pitched whine or chip coming from the bottom left area of the CPU/Heatsink. It isn't the fan, as I have stopped the fan and it still makes the noise. I was also able to correlate the vcore voltage with the noise. The noise is only present while the vcore is below 1.000v. After throttling over 1.000v it goes away. I am using a i5-2500k. I am not overclocked anything and made very few changes to the Bios (just boot order and things like that).
Is this a problem with the socket, northbridge, or some other part on the board? Or is this a problem with the power supply not supplying the right kind of voltage? Or is the computer throttling too low? Like how a car doesn't run properly if idling too low?
Thanks in advance,
m@
System Specs
VGA:onboard MB:MSI H67MA-E35 (B3) LGA 1155 Intel H67 Micro ATX OS:Win 7 64bitCPU:Intel Core i5-2500K Sandy Bridge 3.3GHzSound:onboardMemory:CORSAIR XMS3 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333PSU:OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 HD:Western Digital Caviar Blue WD5000AAKS 500GB 7200 RPMCooling:retail with CPU

Quote from: dilburt on 21-March-11, 08:05:56
No, this is a very common issue with chokes since a choke is very similar to a buzzer or speaker coil so if it's a bit loose, it can vibrate and emit high-pitched sounds. It will not damage anything by itself so if you can get it to stop using settings that are otherwise safe then there is no need to worry about it.
- D
I believe this is more common with iron chokes. The ferrite chokes used on this motherboard are far less likely to buzz. I did look at the board photos and it looks like the CPU PSU is standard FET transistors. Hmmmm.

MSI H67MA-E35-B3 & some ram questions

Hi, I'm still here!
I recently bought a MSI H67MA-E35-B3 to build a fanless miniPC for testing hardware (fans, ssd, sound card),
but I have some doubts about ram:
I know thant this mobo support two unbuffered DIMM of 1.5 Volt DDR3 1066/1333 DRAM, 16GB Max..
well, can I use a CORSAIR Vengeance WhitePC3-12800 (1600MHz) — 1.35V 8GB Dual Channel DDR3 Memory Kit (CML8GX3M2A1600C9W)?
that is; can the card bring down (during the star-up bios) the ram fron 1600Mhz to 1333Mhz which is the maximum rate allowable by MSI?
ddr3 must be unbufferd (not registered), but can they be ECC...is this correct?

Quote from: Bernhard on 03-September-11, 21:33:06
My suggestion is that you stick to standard 1,5V modules.
You can also ask MSI technical if the 1,35V modules are at all supported by the BIOS. >>How to contact MSI.<<
Check if your BIOS DRAM voltage range even allows setting a voltage of 1,35V.
Normally if the RAM SPD profiles are standard, the BIOS will default to 1333.
MSI H67MA-E35-B3 can support 1.35vram!!!
I try it with ddr3 g.skill 1333 eco 1.35vram (from my other 775 system with MSI P45 Diamond ), and they worked great!
Quote from: HU16E on 04-September-11, 02:30:27
Try not to confuse 'standard' with 'rating'. The Corsairs you have are 'rated' 1600, but most likely are overclocked, in this case undervolted, (undertimed for 1600 speed) 1333 chips. I checked the Corsair Website, & the RAM you have purchased does have SPD programming to default to DDR3 1333, 9 9 9 24. The difference is they have a 1.35v's. Again, Sandy Bridge is designed for DRAM V. 1.50v's + or - 0.075v's. That is why I recommended the other Corsair kit. I am pretty sure the RAM you currently have will properly default to the 1333 & 9 9 9 24, but the 1.35v's setting may cause a problem. As Bernhard has mentioned, the system may not be able to lower the DRAM V. to 1.35v's, I have never tried it to find out. The other scenario is the DRAM V. will default to 1.50v's at startup & work fine. Then, manual reduction of the DRAM V. could be attempted.
I've not bought the corsair ram ..
If the 1600 ddr3 worked under at 1333 could be that they would not work at 1.35volt, but at 1.5volt standard value

H67MA-E35 (B3) HDMI and DVI-D no output

Just did a new build consisting of:
Mobo H67MA-E35 B3
CPU Intel i5-2500 3.3 Ghz
Mem 8GB DDR3 1333MHz
Win7 64bit
I am not getting an output signal from either the HDMI or the DVI-D. The VGA works fine.
I flashed the Mobo BIOS to E7680IMS v11.6 and installed the newest driver for the graphics on the CPU to version 8.15.10.2361
In the BIOS I have the graphics set to:
Initiate Graphics Adapter (IGD)
Integrated graphics share memory (128)
DVMT memory (maximum)
IGD multi-monitor (enabled)
Any ideas on what to do next? Thank you

Glad you got your issue sorted out. I'm am a little confused with the explanation of your solution.
You monitor has only VGA and DVI inputs. Your mainboard has VGA, DVI, and HDMI. Correct so far?
You bought an HDMI to DVI cable, which solved your problem, but your problem was a faulty female DVI on the monitor?
How is this possible? The only way that cable would even fit is going HDMI on mainboard to DVI on monitor, but you stated the port didn't work.
Or was this all done with the new monitor after you found out the DVI port was broken on the old one?
Have you tried the old monitor on a different system to check if it's the DVI port?
The reason I ask all this is if I'm wondering if your issue was really a broken port on monitor, or the MSI display bug that is effecting so many core iX H and Z chipset boards.

Post Problems with H67MA-E35 (B3)

Hi maybe somebody can help me with this.
I have a H67MA-E35 (B3) and start to face problems with post, no beeps no monitor signal nothing... the only way is let the PC disconected for a couple of hours or even a day and the mobo start normally but when i try to reset or turn off,,,, the motherboard dont start again no beeps or monitor signal.
I tried to update drivers and bios version but nothing helps i still having the same problem.... any ideas? i am getting crazy please help!!

Quote from: xmad on 01-August-12, 01:42:01
>>Posting Guide<<
We are going to need more information on what components are in your system.
Also, clarify does the system crash while under load or just not start?
My system components are:
CPU i3 core 3.1 ghz
HD Seagate ST500DM002 500GB SATA
MEMORY KINGSTON KVR1066D3N7K2 2GB
PSU 500W
Bios updated to latest version via LiveUpdate
Running W7 32 bits
My system don't crash under load, just dint start after reset o turn off. To start again i have to unplug the AC cable and try to start after 2 hours or more.
Tell me if you need more information.
Thanks

H67ma-e35 won't overclock

I have a h67ma-e35 mainboard with a I5-2500K CPU and I wan't to overclock, but it seems to be impossible to do so on this mainboard.
Whenever I put the cpu on a higher mulitplyer and reboot it always reverts back to the old multiplyer and thereby undoing the overclock, this happens with the bios and msi control center.
Does anyone here have a idea how I could get some overclocking going on my system without buying a new mainboard....

Quote from: Bernhard on 16-November-12, 18:39:21
Oh no, they are not, as you can OC the GPU and the BCLK if you so wish.
First peruse the facts before making wild comments that are untruthful. http://www.anandtech.com/show/4830/intels-ivy-bridge-architecture-exposed
It does help to gather technical facts before purchasing HW that one expects to support the intended outcome.
No H67 board out there supports "K" edition CPU multiplier overclocking. Sorry mate. Cry on Intel's shoulder.
Never buy a Yaris and then tell the manufacturer that he forgot to give you the Lexus luxuries.
OK, just gotten the box of the mainboard, let me qoute from the box:
OC Genie is an auto-overclocking technology for any type of user. Just enable the OC Genie function and the CPU memory, and iGPU will be automatically increased for top performance!
Benefits:
Auto detect and overclock CPU, memory, and iGPU in 1 second
Unlock CPU Ratio and overclock to 4.2GHz
Unleashed 36% iGPU increase
Tell me how this is not a lie, overclock to 4.2 GHz...

H67MA-E35 WOL

Does the H67MA-E35 mobo support waking up from S5 state?
Update: To answer the question yes it does. To make it work disable EUP2013 and enable Resume By PCI or PCI-E Device. If you do not disable EUP2013 you will only have the option to Resume from S3 By PCI or PCI-E Device.
Thank you

Thanks for sharing!

H67MA-E35 (B3): Using certain tuner cards causes freeze/BSOD

Hi, I have an issue with my HTPC that I've narrowed down to the motherboard. Certain TV tuner cards or combination of TV tuner cards don't work, by which I mean the PC freezes or BSODs when I try to use the tuners on those cards. Here's a list of the combinations I've tested along with their maximum current draw on the 3.3 V rail according to their user manuals:
BGT3630 = 1.8 W / 0.6 A = fine
BGT3600 = 4.0 W / 1.2 A = fine
BGT3600 + BGT3630 = 5.8 W / 1.8 A = broken
TBS6981 = 7.3 W / 2.2 A = broken
TBS6981 + BGT3630 = 9.1 W / 2.8 A = broken
As you can see there's a bit of a pattern here - as the 3.3 V rail current usage increases, things stop working (somewhere between 1.2 A and 1.8 A). I don't know if this is a pattern or just coincidence. Here's my specs:
MSI H67MA-E35 (B3)
Intel Celeron G530
4 GB 1066 MHz RAM (CMV4GX3M2A1333C9)
nVidia GT 430 (Asus passive)
Antec EA-380D Green
Intel 320 Series (40 GB)
SH-B123L/BSBP BD-ROM
GD04B Grandia Case
To narrow down the problem, I tried the tuner cards in my main desktop and they all work fine. I've also tried swapping over the PSU with from my file server (Huntkey Jumper 300G) and I get exactly the same problems. I have the latest drivers for everything including the tuner cards, plus the latest BIOS. I've also tried using both PCI-E 1x slots in different situations and clearing the CMOS; nothing helps. So I think that leaves me with one option: the motherboard.
Is this likely to be an incompatibility issue with the H67MA-E35 (B3) or a fault with my specific board?

Quote from: xmad on 23-July-12, 06:24:05
It seems thouse cards wont work @ 1x which is all you are getting with your VGA & 2 other pcie slots filled. I found several other people having trouble with those cards in 1x slots.
Hmm, where are you getting this information from? The pins on the tuners are only 1x and the user manual of the BGT36xx series states they will work in 1x/4x/16x slots. The MSI website just says this for the PCI-E slots on my motherboard:
• 1 PCI Express gen2 x16 slot
• 2 PCI Express gen2 x1 slots
• 1 PCI slot, support 3.3V/ 5V PCI bus Interface
I'm pretty sure that the two non-VGA slots are physically 1x so won't ever be 8x. Also, are you sure the "several other people" aren't just me on other forums cos that's what a quick google shows.
Quote from: xmad on 23-July-12, 06:24:05
To confirm, remove the vga and use onboard, put the tuner cards in the top 2 slots and test. I believe that should be 16x and 8x (although i'm not sure about the specifics on your board in regards to the total number of lanes.) or at worst 8x /8x.
I'll give it a go some time this week. I'll do a full backup beforehand and restore after testing because driver conflicts could cause problems, plus whenever I put in the BGT3630 alongside the BGT3600, it detects all the tuners as "new" so I have reconfigure my software, MediaPortal, each time.
By the way, I really appreciate your help here. So far no-one else has any idea what is going on!

Help!! MSI H67MA-E35 (B3) Beep at startup

Hi every one.. I just got a new PC.. Here goes my config :
Spec :
Intel Core i5 2500
MSI H67MA-E35 (B3)
Corsair 1333MHz CL9 4GB
Fsp saga II 500w
NZXT Gamma
BenQ G2220HD
Logitech MMKB+Optical
Got an issue now.. At the system startup i get 2 short beep 1 normal beep when connected to VGA port and 4-5 short beep and 1 normal beep when connected to DVI port.. But every thing is running fine after that.. Is there something to be worried here?? When i googled about it, many with this mobo had this problem... during the beep, i get 99, A4 on the bottom right corner.. guess its error code..
Plz help me to solve this problem..
Thank You
Regards,
Navin

Quote from: ptsai83 on 06-July-11, 02:27:55
Do you mean ripping off Buz1 from the motherboard? the buzzer is physically attached to the mobo.
Quote from: ptsai83 on 06-July-11, 02:27:55
Do you mean ripping off Buz1 from the motherboard?
Yes, normally its removable
Quote from: ptsai83 on 06-July-11, 02:27:55
the buzzer is physically attached to the mobo.
Just checked and yes seems for your board is different, its build-in instead:
In such case: Place a small piece of scotch tape over the speaker hole[over the top of the buzzer/speaker]
EDIT:
Here is better image:

No sound from TV when using HDMI from HP Envy Ultrabook4 despite downloading drivers

Problem: When using an HDMI cord from my HP Envy Touchsmart Ultrabook 4 (4-1105dx)to connect to my TV to view movies, the video appears on my TV screen, but there is NO sound from the TV. Instead the sound comes from my lap top.
Troubleshooting: I have looked under Sounds in the Control Panel, but the only choice listed is Speakers & Headphones IDT High Definition (which is the default) and does not allow sound from the TV when using the HDMI. I have also tried to download Driver and Audio Graphics, but wasn't sure which one & the ones which were downloaded have not solved the problem.
Can you assist me? Which is the correct Audio/Graphic Driver to download? Or is there another possible reason why I cannot hear sound from my TV when using the HDMI to connect to my lap top?

Hi,
Please try this first to enable Speakers in Playback devices as follows:
1. Right click speaker icon (bottom right hand corner)
2. Select Playback devices
3. Right click HDMI sound
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do i use my apple express speakers as the sound from apple tv?

how do i use my apple express speakers as the sound from apple tv?

Welcome to the Apple Community.
You can't with the Apple TV 2 or 3, with the Apple TV 1, you can choose them from the Airtunes option in the settings menu.

No output sound from output port/analog audio: Need help

hello, I want to connect my analog audio equipment to my iMac. I have done this in the past with my old G3. I have connected the RCA cables to a 3.5 mm jack and put it into the audio input port, which was what worked on the G3. When I open the sound page for input & output, on Output I can see the volume bar thing moving in relation to the sounds from mic, turntable, etc: all the analog audio things. However, there is no actual output of sound through the iMac;s speakers or a headphone. The output page is pretty simple so I am real sure I have all the rigt things checked, unchecked etc. Any ideas? Thanks.

I had what sounds like a similar problem to jazzzrat. i had my macbook setup to a stereo and it worked for over a year. suddenly no sound came out of the stereo. in my case, it definitely was a software setup thing.
plug in your stereo jack into the audio out port. then go to system preferences-->sound-->output. on there you should see, under "device for sound output": Name=Headphones, port=built-in output. (if you see name=built in speakers, you plugged in the wrong plug). Now go down to the bottom of the window and UNcheck the "mute" box, and make sure the volume slider is midway or more.
For some reason, mac allows you to mute the "headphones" and "built in speakers" selectively. we have no idea how that box got checked, that remains a complete mystery. but when we eventually found -- and unchecked -- the box, our stereo output came back just fine.
i hope this works for you. good luck and have a good new year.

What do I need to get better sound from my Mac mini

The sound from my external speakers is very poor. I am hard of hearing(50% in one ear) and I find it very difficult to follow a conversation etc.
I am now on Yosemite, and the speakers have been used on all my previous pc's successfully. I cannot find a control for the built-in audio, does one exist?

What do you mean by poor sound?
The Sound is controlled by System Preferences>Sounds>Output

I've connected my ipad to my TV via hdmi but cannot get sound. Is there a way to get sound from the TV?

I'd like to get sound from the tv for my keynote presentations. Is there a way to do this via the hdmi connection? Or do I need to connect an 'audio-out? Thanks in advance for your help

the hdmi should transfer both sound and picture
http://store.apple.com/us/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt er-4k?fnode=a8e08a2bb3c16bf3cd606aecff68b12c10fe327cd7b063c9bbc492e57158bbfa0778 d5b941eb2a8c1c5f2e25e51cf7b82e193c9a722651b3fc2694996f7b5281b8bf4338c46284247b76 ccce6907fa6caee062d974158ee4d0336fca558384426e7a6c6cbf3ee58c8f53f8db53c9ef91
Supports multi-channel digital audio output on compatible devices
make sure your ipad is not muted
make sure you volume is not all the way down
make sure audio play out of the ipad when not connected to the hdmi adapter
if you did and it don't work then it's likely an issue with the connetor
or the tv or it's settings

No sound from optical output when using hdmi/dvi cable

I am trying to connect my apple tv2 to my B&O Beovision 7. I have used an HDMI to DVI cable which is working fine for the picture; but obviously DVI does not carry sound. I have therefore connected an optical cable to the digital optical output on the apple TV and put this through a converter to digital coax, which then goes in to the TV. I know the optical cable / converter set up works fine as I have tested it on my sky box and it works fine. But I get no sound from the apple TV - any ideas?

I hav exactly the same problem... Did you resolve this??

No sound from H67ma-e35 (b3)

Similar Messages

Maybe you are looking for