No sound from headphone on X-Fi Platinum Front Panel

Hey,
i just built it a X-Fi Platinum installed the drivers and checked if everything works. My Problem is i dont get any sound out of the headphone jack at the Front Panel.
Headphone detection ist working as is the remote control.
Any ideas what could cause this? I need that 2nd audio output.

i have the exact same problem with vista!!!no sound from the front panel of x-fi platinum!i don't know what to do!

Similar Messages

Audigy 2 ZS Platinum front panel under VISTA

I've got the card and front panel installed and apparently working, except one issue. I'm trying to pipe in sound from a stereo receiver to the front panel auxiliary 2 inputs, so I can listen to a sporting event(broad cast on AM) over my pc and record it. When I turn on the receiver and hook it up, I hear nothing. When I start the recording software and record, it records from the auxiliary 2 perfectly and I can hear the broadcast fine on playback. So, the question is, why can't I hear it li've over my speakers?!?! Extroadinarily frustrating! VISTA has no volume control display(that I could find) like XP did where I could check the auxiliary 2 levels, etc.
Again, I'm running VISTA Ultimate 64 bit and have the most current Creative sound drivers installed and all other sounds from within programs seem to be working 00%.
Thanks for any help!

Nothing huh? Nobody has any idea about this or knows of another thread where this question was answered?
Thanks in advance if you can help out!

Low and unclear sound from headphone HP Pavilion G6 2228tu

laptop hp pavillion g6 2228TU OS windows 8 pro 64 bit
every thing was working fine.. but from last 2-3 days i faced a problem of low and cracking sound from headphone ..
laptop speraker are working fine .. but when I connect headphone to audio port .. sounds comes out to be very low and unclear.
I tried headphone with my desktop and mobile but it was working fine.
I called HP custmor support.. they gave a link of sound driver.. i updated sound driver but no solution comes out..

Hello Deepak-Kumar,
You’re having a problem with the sound not be very loud.
Go to device manager and uninstall the IDT audio.
Do not restart the computer.
Now install the updated sound driver.
Since it has not been to long since the problem started, you can run a system restore.
This will take the system back to when everything was working correctly without affecting your personal files.
Here is a link on how to do a restore.
Let me know how everything goes.
Have a good day.

No Sound From Headphone Jack, Only Internal Speakers working in Macbook Pro A1278

Hello, the internal speakers of Macbook Pro A1278 OSX 10.7.5 are working perfectly, but no sound from headphones or external speakers when plugged in. Headphones/speakers recognized when plugged in, shown by System Preferences/Sound, and since the sound stops from internal speakers when headphones/speakers are plugged in. No red light seen coming from headphone jack, as I read in other posts. The problem began after a cable was connected between computer and stereo system. Maybe overloaded the sound card and burned out a connection? Wondering if you think that the sound card needs to be replaced or is there another solution possible? Thank you.

Hello JohnBoarkman,
Welcome to the Apple Support Communities!
I understand that you hear no sound from your accessory when you connect to your headphone jack. My first troubleshooting suggestion for this situation would be resetting the NVRAM on your Mac. Please use the instructions in the attached article to complete this process and let me know if the issue continues.
How to Reset NVRAM on your Mac - Apple Support
Have a great day,
Joe

Problem with Audigy 2 Platinum Front Panel Input

0Problem with Audigy 2 Platinum Front Panel Input? Hey everyone,
Here's the background of the issue. I got a PS3 over the holidays for literally free
I had my computer out in a testbed style. Plugged the PS3 into my monitor HDMI --> DVI cable, and Red/White into the front RCA jacks of the Front Panel (Aux 2). As soon as I plugged in the cable, I got sound out of my speakers and was able to enjoy my PS3 in 720p
I put all of the components back into the case after cutting exhause and intake fan holes. I brought everything back to school, fired up the PC and PS3. Lo and behold, there is no more sound from the PS3. I know that PS3s are temperamental in moving, but I hooked the audio up to my TV and the sound came out just fine. The AD Ext cable looks like it's secure and in place. When I hooked up a mic and headphones to the front, they worked fine as well. However it seems to be just the AUX 2 RCA inputs that dont work anymore. Any ideas about how to fix this issue? Is there a function I have to turn on now in the software to allow sound to pass through? Any information would be wonderful!? I'm going to try an optical cable in the near future, just need to borrow one from a friend =/

Problem Solved.
I had moved my cards around for better airflow. I moved the SB Audigy card from the bottom PCI slot to the top. Thinking this might be the problem, I moved the video card back to the top slot PCI-E and the sound card to the bottom PCI slot. Sound is now working again. Thanks for the thread views?:smileytongue:
Think that when I have to buy Win 7 for real if the problem would still persist if I moved the card again? Or is this a hardware limitation?

Ipod classic no sound from headphones

My Ipod classic has no sound from the headphones?

Hey carnabylane,
Thanks for the question. To isolate the issue further, does it persist with a different set of headphones? If so, lets complete some troubleshooting with your iPod:
Apple - Support - iPod - iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thanks,
Matt M.

Audigy 2 plat- cannot get sound from headphone output, only from rear pa

I hjave installed the card but have not been able to get output from the headphone jack omn front panel. everything else works fine.

Inertia22 wrote:
I put in the Audigy 2 zs from my old PC into my new one and I cant get any sound from the Headphones or Mic.
Only sound from the external speakers. Any help would be greatly appreciated.
If you getting sound from the external speakers....are we talking the ones on the laptop?
Means you still have the onboard sound turned on at a guess.

No sound from headphone or internal speaker

I have an iPad 4th gen, there is no sound from the internal speaker, nor from the headphone jack. I've swapped all parts in the ipad and another motherboard works, but this one is obviously stuck in some mode I can't really explain. When I volume up or down while on the home screen, it shows volume up and down fine, but I think it should show ringer up and down. I plugged in headphones, and unplugged them, and it gets stuck thinking headphones are plugged in, but there is no sound from the headphones. Youtube videos do not play, they appear to start playing but they ultimately just sit there and never play. Itunes store sample music does not play either. I click on the song I want to play a sample of and the play/pause effect of the sample graphic flashes and nothing happens, like I never hit play. I've tried airplay to my apple tv, and when I select apple tv from the bottom swipe up menu, it goes right back to the ipad, it will not try to air play. This is a very strange situation and I'd like any help I can get. I've reset all settings, upgraded ios to the latest, cleaned out the headphone port, swapped the main headphone/camera/mic/volume button cables with working ones, I've changed the internal speaker with a working speaker...I'm stuck.

Hi,
As you mentioned, the HDMI sound may take over sound, disable HDMI sound may help. Pleae try:
Right click the speaker icon
Select Playback devices
Right click HDMI sound and disable it
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

No sound from headphone port in 15" macbook pro mid 2012

Hi everyone,
I'm having a problem. I didn't use my headphone port for a long time and then when I did I used a non-Apple headphone and when I got no sound I thought it because it was b/c of this. So when I used an Apple headphone recently I found I had the same problem. I am wondering if there is a fix out there or if it is something inherent and I need to get it repaired. I get sound from the built in speakers just not from the headphone jack. Much thanks in advance for any advice.

Try a PRAM reset:
http://support.apple.com/kb/ht1379
Ciao.

Terrible, tinny sound from headphone jack. Satellite

I've looked at all the settings I could find, but the sound from iTunes, out the headphone jack, to a small stereo is horribly tinny. I can plug the exact same wire into my phone which has great sound, so it's sth about the sound card ,not the rest of my system. I am not talking about the speakers

Hello JohnBoarkman,
Welcome to the Apple Support Communities!
I understand that you hear no sound from your accessory when you connect to your headphone jack. My first troubleshooting suggestion for this situation would be resetting the NVRAM on your Mac. Please use the instructions in the attached article to complete this process and let me know if the issue continues.
How to Reset NVRAM on your Mac - Apple Support
Have a great day,
Joe

Satellite C660 - No sound from headphones but sound from speakers - Win7

I know many people here have the same problem but till now I have not found any solution.
My soundcard is a Realtek. After reinstalling Windows 7 I have no sound out from my headphones while I have some from my speakers.
As soon as I connect the headphones, the Realtek manager appears and I choose headphone but if I press the "Test" button there is no sound and no sound if I play music.
Any des/re-installation of the drivers does not fix.
I have to mention that my headphones work perfectly with Ubuntu. So the jack entry is good.
In "Playback devices" from the sound control icon, the "Speakers" entry has "Set default" in grey.
Thanks a lot for any help.
Regards.

> As soon as I connect the headphones, the Realtek manager appears and I choose headphone but if I press the "Test" button there is no sound and no sound if I play music.
Go to Control Panel -> Realtek HD audio manager
Here you should see the tab speakers. Click on the yellow folder sign in the right upper corner.
Ensure that the option disable front panel jack detection is NOT checked.
Furthermore check the option at the bottom called Enable auto popup dialog
[Realtek HD audio manager screenshot|https://itpendium.files.wordpress.com/2009/05/14-realtek-hd-audio-manager-big.jpg]
By the way: in control panel -> sound -> playback tab click right and mark the two options show disabled devices, show hidden devices
Now you should also see the headphones jack. In case it was disabled, you could make it active.

X-Fi Titantium Fatality - no sound from headphone in I/O drive

Everything seems to be working on my new X-Fi Titanium Fatality, except that I get no sound when I plug headphones in the front I/O dri've. Everything else on the I/O dri've seems to work OK. Can I have speakers plugged in the PCI express card and the I/O dri've? I changed the mode to entertainment mode, made sure headphones were selected, clicked on automatically enable headphone settings and automatically mute speakers. Interestingly, I still get sound out my speakers, so it obviously doesn't recognize that the headphones are plugged in. Any ideas? [email protected]

Hey Guys
The feedback in the Front Panel/Rear Panel was something I ran into as well
Basically if you go into the Audio Console, have it set to game, you can click the speaker tag under Mic, this will stop all the feedback via the mic through the speakers, and yes, it will works in games/you can record sounds
Second note, the I/O dri've has options under the control panel
.) Control Panel
2.) Hardware
3.) Sound
4.) Click on the Recording Tab
Under here, make sure the front panel plus are not Disable, you can tell by plugging in your mic and talking into it, you should see one of the bars moving as you speak

No sound from headphone/speaker HP Pavilion g7 Notebook PC

my HP Pavilion g7 Notebook PC sound stopped working about 4 weeks ago. normally i would go onto troubleshooting and just change to audio to default with my headset on and it would work but today sound stopped working. before this started I had deleted a ton of photos and a few things I thought we're not important but may have been. anyways so i deleted everything in my recycling bin, i do it once a month and must have deleted somthing important. halp?

Hi @Chaithra ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand from your post that you have sound in the right speaker but not the left.The two main reasons for this would be that the speaker has failed or your system is configured incorrectly.
Have you ran the HP Support Assistant to aid with HP updates and fixing issues?
Have you tried running MS Fix It to help with difficulties?
Have you tried Using automated troubleshooting (Windows 8)?
Here is a link to No Sound from the Speakers (Windows 7) that will guide you though testing and configuring the speakers.
Here is a link to the HP G4 Notebook PC Maintenance and Service Guide. Please note on page 30 or chapter 3 page 22 item 8 for a part number for a replacement speaker should it be required.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Buzzing sound from headphones.

I did a search for this issue and got a few results but unfortunately none of the threads seem to have a solution. Just started today, that when I plug my earbuds into the audio port, there is a loud buzzing sound from the left earbud, even pressing mute wont stop it. I tried restarting the machine but it still persists, hoping somebody here has had the same issue and can help.
Thanks in Advance.

Thanks for the replies, I'll try and eliminate environmental issues, if that doesn't help I'll just have to ring customer care about it.
Thanks again.

Audigy SB 2 ZS Platinum Front Panel not working-HELP

Hey everybody. I'm new to this forum, but not to computers. I built my computer about 4-5 months ago, and here are my specs:
Ultra MS Blue Dragon
ASUS P5GD
Intel P4 Processor 3.0GHz
GB GeIL RAM
6600 GT 28MB Video Card
Samsung 20GB SATA HDD
Lite-On and NEC DVD Dri'ves
Ultra X-Connect 500 W PSU
Creative SB Audigy 2ZS Platinum
I got the 2ZS platinum from a friend, but I already had a regular 2ZS. I plugged in his front panel to my old 2ZS. The front panel did not work. I then got his 2ZS, just the sound card, and plugged in the front panel. It still did not work. I installed all the software and drivers, and nothing. My sound card works fine, it is just the front panel that doesnt work. Does anyone have any ideas?
Thanks a ton,
Derek
P.S. The AD_EXT Cable fell apart a couple of times, but we put it back together. Could that be a problem? If so, where can I get a new AD_EXT Cable?

ttt

No sound from headphone on X-Fi Platinum Front Panel

Similar Messages

Maybe you are looking for