No sound from headphones and other issues.

Greetings.
I was working in a previous version of GB and this version (09 ver 5.1) is not real acoustic guitar friendly, I'm finding. But maybe you can help me out.
First my set-up: Acoustic guitar with pick-up>LR Baggs Para DI pre-amp>M-Audio Fastrack Pro USB.
Computer, Latest OS, driver for Fastrack, Mac system sound Preference settings Input=Fastrack Pro Output= Audio line out (my speakers are connected to that on the back ofhe MacPro.
In the GB audio/midi prefences Audio Out to Built-In line Output, Audio Input= M-Audio Fastrack
So my first issue, If I create a real instrument track, I can't seem to monitor my audio when the headphones are plugged into the M-Audio device. So I plugged the headphones into the front HP jack on the front of MacPro, and still no sound.
BTW- I tried toggling the Ducking menu item to no avail.
I also tried creating an "electric guitar" track, but that just presents a whole bunch of amps, not what I want. So I think the "Real Instrument is for me.
I also noticed that when I enable the "record" button on the track, it shows that I am getting a signal, but the Master Volume shows no activity. However if I record something and play it back, the Master volume shows activity. I remember in my previous version, the Master Volume would be active all the time I think.
But for now, my main issue is the lack of headphones.
Can you guys help?
Thanks.
Jonathan
Message was edited by: Jonathan Levin2

Solved. A setting on the M-Audio interface. Signal knob needed tweeking.

Similar Messages

High pitch whine noise from speakers and other issues

I just got a 2010 Mac Mini and transferred all of my data and apps and accessories from my old Mac Mini which was running 10.6.4 (2007 I think). One of the accessories is a Griffin Firewave. I had to get a new firewire cable to attach the Firewave since the new Mac Mini has a firewire 800 port. On the old Mac it worked great, I was able to run 5.1 speakers with no problem. With the new Mac things aren't so nice. I get a high pitch whine through the speakers. The whine will go up and down in volume with the volume control on my sound system (Klipsch Promedia 5.1 Ultra) as well as with the Mac volume control. I can increase the gain in the Firewave app which will increase the volume of what I want to hear without increasing the volume of the whine, however it will cause the audio I want to hear to distort. The other issue I have is that when I put the Mac to sleep it seems to cut all power to the firewire port, causing the Firewave to turn off and lose its settings. I believe this to be a bad design on the Firewave's part but the old Mac did not shut off the power to the firewire port when going to sleep so this was not an issue. So my questions are, does anyone else have problems with external sound cards having a high pitch whine noise and is there a way to prevent the firewire port from turning off when the Mac sleeps?
BTW, I have tried reinstalling the Firewave driver (several times) and I've unplugged and re-plugged the firewire cable at both ends. I have both the Mac and the sound system plugged into a line conditioner so I doubt it's dirty power. I do realize that the Firewave only claims support up to 10.5 but it was working without issue on the old Mac Mini on 10.6

I have the same problem. I have an early 2009 Mac mini and get the whiny noise from my powered speakers. The volume of the whine noise tends to change smoothly up or down, and often does a stuttering effect along with it. It stays there for up to a minute or so and then eventually goes away. It always seems to happen at random times.
I've heard this same sound effect coming from a podcast that I was listening to on my iPod Touch. It seems that the interviewer was recording from a Mac mini as well, though not sure. The sound in the recording was exactly like what I hear coming from my Mac mini. I often thought that this was a problem with my speaker system, but was surprised to find that others are experiencing the same kind of issues.

Sound from Headphones and Speakers

I am getting sound out of the headphones and the speakers on my laptop. I am trying to hookup my laptop to my tv so that I can watch movies. I have everything figured out, except that i think I disabled the headphones. When I plugged the cable into the headphone jack on my L455 laptop and into the RGB audio in on my TV, my laptop asked me if I had connected headphones or a line out. I wasn't thinking and switched it to a line out. Because of this, I think i screwed it up and now can hear the audio from both the TV and laptop speakers. When I search for the headphone driver on my laptop, they are no where to be found. Any advice as to how to fix this problem. I would really like to watch this movie sometime tonight without an echo from the laptop speakers!! If I turn down the speakers, no volume goes to the TV. If I have the speakers muted, no volume goes to the TV. If I disable the speakers, no volume goes to the TV. I beleieve this is due to me disabling the headphones, but I can not find it on my computer!!
Thanks, Cortney

Realtek chipsets do have a "multi-stream" option. Classic mode seems to provide the most normal result, but there was a version of the driver where the behavior was unpredictable and it wasn't possible to know what would happen.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Sound from headphones and analog line output?

Is there a way to get sound our of the Mac Pro from the analog line output and the headphones at the same time?
dennis

Thank you Malcolm it works well. The only thing I found out is when doing it this way Audio Hijack Pro has to be in the record mode and on pause or files of what you are listening to will be created, eating up hard drive space.
But it works!
Dennis

Suddenly no sound from speakers and only from headphones

Hello,
I have a HP 8440p VQ664ET#ABU Elitebook laptop running Windows7 64bit pro.
Since today I'm experiencing the following problem:
1) no sound is heard through speakers when headphones are disconnected.
2) If I connect the headphones, the sounds are heard correctly through them: this is the expected behavior
I don't think it's a speakers hardware problem because I can make the speakers play sounds for one or two seconds like this: while a sound is being played, such as music file for instance, if I move up and down the headset volume cursor (regardless if headphones are connected or not) I can hear the played sound through the laptop speakers for a few seconds, after which the speakers mute again.
So to summarize:
1) Headphones disconnected: no sound from speakers
2) Headphones connected: sound from headphones
I rebooted, suspended and restored without any luck so far.
I'm under the impression that there might be a problem with the headphone jack: it is like the laptop always thinks that the headphones are connected and therefore cuts the output to the speakers.
Any clues?
Thanks
Sergio

Try installing the sound drivers from the following weblink:
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59649.exe
If the issue persists, try the troubleshooting steps mentioned in the following weblink:
HP Notebook PCs - No Sound from Speakers (Windows 8)
Offers tested solutions that begin by identifying the exact issue, and then adjusting the settings that will resolve the majority of sound problems on a notebook running Windows 8.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Low and unclear sound from headphone HP Pavilion G6 2228tu

laptop hp pavillion g6 2228TU OS windows 8 pro 64 bit
every thing was working fine.. but from last 2-3 days i faced a problem of low and cracking sound from headphone ..
laptop speraker are working fine .. but when I connect headphone to audio port .. sounds comes out to be very low and unclear.
I tried headphone with my desktop and mobile but it was working fine.
I called HP custmor support.. they gave a link of sound driver.. i updated sound driver but no solution comes out..

Hello Deepak-Kumar,
You’re having a problem with the sound not be very loud.
Go to device manager and uninstall the IDT audio.
Do not restart the computer.
Now install the updated sound driver.
Since it has not been to long since the problem started, you can run a system restore.
This will take the system back to when everything was working correctly without affecting your personal files.
Here is a link on how to do a restore.
Let me know how everything goes.
Have a good day.

No Sound From Headphone Jack, Only Internal Speakers working in Macbook Pro A1278

Hello, the internal speakers of Macbook Pro A1278 OSX 10.7.5 are working perfectly, but no sound from headphones or external speakers when plugged in. Headphones/speakers recognized when plugged in, shown by System Preferences/Sound, and since the sound stops from internal speakers when headphones/speakers are plugged in. No red light seen coming from headphone jack, as I read in other posts. The problem began after a cable was connected between computer and stereo system. Maybe overloaded the sound card and burned out a connection? Wondering if you think that the sound card needs to be replaced or is there another solution possible? Thank you.

Hello JohnBoarkman,
Welcome to the Apple Support Communities!
I understand that you hear no sound from your accessory when you connect to your headphone jack. My first troubleshooting suggestion for this situation would be resetting the NVRAM on your Mac. Please use the instructions in the attached article to complete this process and let me know if the issue continues.
How to Reset NVRAM on your Mac - Apple Support
Have a great day,
Joe

My Iphone 4s has no sound from speakers and no text tones.

There is a red tag in the dock indicating water contact.
I cannot work out how this is. I have never used the phone in the rain and if i did i would expect the red tag to be in the headphone port.
I carry my phone at all times in my jacket pocket.
I never use the phone to listen to music in bathroom or shower.
It has never been near spills or dipped into my cup of morning coffee.
So.....how do I prove this to Apple and get a replacement??? Everything else works, just no sound from music and texts etc.
Done a restore and doesnt work.
HELP!

Hello,
Sorry about your situation. We do shell out some money for this phone (some more than others) but at the end of the day we are humans and these phones are also made by workers that cannot even afford and iPhone. Don't blame Apple (blame Foxconn?).
I normally use the vibrate with the Bluetooth headset and send the audio through the Bluetooth speaker, so this is not a big issue for me. However if your settings are correct they can verify this issue at the store immediately but not sure about the turn around but the Apple genius should have some estimate.
Hope the the Bluetooth can help.

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

[svn] 3418: Remove obsolete poll-sync responders from PollingChannel and other impacted protocol-specific channels .

Revision: 3418
Author: [email protected]
Date: 2008-09-30 10:24:48 -0700 (Tue, 30 Sep 2008)
Log Message:
Remove obsolete poll-sync responders from PollingChannel and other impacted protocol-specific channels.
QA: No
Doc: No
Checkintests Pass: Yes
This stuff was originally used by a PollingChannel to directly monitor subscribe/unsubscribe commands issued by higher-level components in order to drive a count of active subscriptions, and from that, whether or not the channel needed to issue poll requests.
However, DataService, and then Consumer ended up managing this directly because they had better insight into when they considered themselves subscribed and they notify the PollingChannel of their state changes directly (mx_internally). When this was added, the underlying poll-sync responder machinery didn't go away, and it generally doesn't cause problems except in the case of a client disconnect without a preceding explicit unsubscribe. In this case the higher level component moves to an unsubscribed state when it disconnects (and lets the PollingChannel know) but because no unsubscribe command is sent by a poll-sync responder, the extra count it added never decrements and the channel continues to poll incorrectly.
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/AMFChannel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/HTTPChannel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/NetConnectionChannel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/PollingChannel.as

Some notes disappeared from iphone, and others are not synchronizing on ipad, mac, and iphone. What to do?

Some notes disappeared from iphone, and others are not synchronizing on ipad, mac, and iphone. What to do?

Hi, MPiaM.
Thank you for visiting Apple Support Communities.
I would need clarification on if you are experiencing an issue with syncing photos via iTunes or iCloud to provide a better answer. However, here are a couple troubleshooting articles that cover both scenarios.
iTunes: Unable to sync photos
http://support.apple.com/en-us/TS3697
Get help using My Photo Stream
http://support.apple.com/en-us/HT203511
-Jason H.

After installing Flash Player, I lost sound on Youtube and other sites. How do I fix it?

After installing Flash Player, I lost sound on Youtube and other sites. How do I fix it? I still have sound on some apps.

To help troubleshoot we'll need the following system information:
Operating   system
Browser
Flash   Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video
Thanks,
Chris

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Itunes error. the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention helps protect against damage from viruses and other threat.

I have a windows Xp computer. and i needed to download the newest itunes to support my ipod touch. but now my computer doesn't let me open itunes. The the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention (DEP) helps protect against damage from viruses and other threat." I tried excluding itunes from DEP on settings but it still doesn't work. I don't know what to do. please help me!!!
thanks

try to select the computer cd/dvd autorun off.
I had the same problem, then Kaspersky software found a conflict suggesting me this solution.
Itunes now works...even if it always asks to set the cd/dvd autorun on when lunched.

IOS 8.2 Update issues.... Sound from headphones choppy and distorted

Hello all,
Did a install from the net thru Itunes, previously i have had only one issue with my iphone 4s since i've had it, today did the 8.2 update from 8.1 and today after the update the headphones now have choppy and distorted playback... At one point when the volume is mid way siri pops up and starts listening.... Not sure why its messed up all of a sudden, last night i was jamming to some dubstep on my beats and had no issues.. Today not the case.. Anyone else have this issue?

A hollow Voice says wrote:
Honda said they can't release updates to match Apple's.
What this really comes down to is that Honda (and other manufacturers) make their system work with the iOS release at the time and take a gamble that Apple won't make any changes that effectively "breaks" the functionality. As stated before, car manufacturers can let Apple know or they can make changes to their own system. Of course even if they let Apple know, there may be a reason that the change isn't made in the final iOS release and the reasons behind it will probably never be publicly disclosed. If manufacturers want to make sure their systems are fully compatible for now and in the future, they need to make the firmware fully updatable through USB or some other means (I know at one point Blu-ray players could be updated by burning the firmware update to a CD and then inserting the disc in the player). My guess is that you're correct that most likely Honda isn't going to release these type of updates as it adds expense and development to a system that isn't critical to a car's functionality.
What manufacturers should be doing is to advise users to not update their iOS version prior to them testing it themselves. If they find that an update breaks the functionality then they should advise current owners of the issues they will have by updating the iOS. Then it would be up to the user to decide to wait for a fix/workaround, or decide if the new or changed features of the new version are worth "breaking" your car system.

No sound from headphones and other issues.

Similar Messages

Maybe you are looking for