No sound from JBL speaker/charger with new 6th gen nano

I just received my ipod original replacement with a 6th gen, but when I put it into my old JBL on stage speaker/charger It did nothing,
Will I need a new speaker/charger or do they make a adapter from the old original to the new 6th gen ?

All I need is fact.
The fact of the matter is you won't know unless you at least try it just as the previous poster suggested that you do!
If you are worried about damaging your iPod, post in the iPhone forum area, call Apple Care, iPod tech support and read the user manual for the proper equipment to use.
iPod nano Troubleshooting Assistant
iPod Troubleshooting Assistant
Service Answer Center - iPod
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
iPod Manuals

Similar Messages

I have the new 6th Gen Nano,AC charger?

Hello,
I have a new 6th gen Nano, and I usually charge it using the usb thru my pc, but I dont use my pc that often.
I still have my old ac charger (A1205) with an 5v output from my 1st gen iphone, can I use this charger for my new Nano? please advise.

All I need is fact.
The fact of the matter is you won't know unless you at least try it just as the previous poster suggested that you do!
If you are worried about damaging your iPod, post in the iPhone forum area, call Apple Care, iPod tech support and read the user manual for the proper equipment to use.
iPod nano Troubleshooting Assistant
iPod Troubleshooting Assistant
Service Answer Center - iPod
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
iPod Manuals

In Chile with NEW 4th Gen Nano that won't charge

I am visiting in Chile with my family and we have two NEW 4th Gen Nanos that won't stay on after being unplugged from the computer. My daughter has a 1 year old MacBook and I have a HP PC with Vista. She had a 3rd generation Nano that worked fine on her USB port and all my PC's USB ports are 2.0 compatible. Help???

See here: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
B-rock

My speaker system won't work with the 6th gen nano

Why won't my Logitech Speaker system for the iPod play or charge my 6th gen nano? It's worked for all of my other nano's. I hope there's no compatability issues.

I'm having almost the exact same problem with my JBL On Stage Micro Speaker (from around 1996) except it charges and syncs my Nano 6G OK. It just won't play the Nano thru the speakers. All my other iPods have played fine sitting in the JBL speaker including my Touch 4G from fall 2010.
The only thing I can think of is that the dock connector in the Nano 6G is wired differently? It would be interesting to hear if anyone has speakers that play using the Nano dock connector. Or if someone from Apple would let us know if the dock connector pin-outs have changed. Very sucky!

Weird Bugs with new 4th Gen Nano

I've been getting weird bugs only a week after I bought a 16GB Orange 4th Generation iPod Nano on ebay New of course. First off, while at school the other day, it shut off and the apple screen showed for about 30 seconds. Then none of my 600 songs would play. However, I reset the ipod by pressing the center button and menu and holding them down for a few seconds. What do you think is wrong? Thank you so much.
John

I just bought a PURPLE 4th Gen Nano 8gig, and I have been having the same problem. If I skip to the next song more than 4 times, the Nano shuts off and reboots. I did have one particular song, when "played," that was causing it to shut down, so I removed it. I did not attempt to re-sync it. Now, if I skip to next track more than 4 times, it shuts down and reboots. This happens a few times a day. Depending on my mood, I may not want to listen to Rock tracks that day, so I skip them to get to my R&B tracks. Some days I want to listen to DANCE tracks. So, for clarity's sake, I do tend to skip songs a lot. But that should not be cause for constant reboots, from any MP3 player. It certainly was never a problem for my Sandisk Sansa e280, that I owned before switching to iPod.
Another item that bothers me is that my tracks are not all in alphabetical order. Or rather, I should say, they are listed alphabetically in multiple sections. Out of 1500+ songs, there are approx. 20 sections of A-Z. For example: If you scroll through the song list A-Z, you will not find Nat King Cole's "Nature Boy." But after Z, the list "continues" A-Z again!! But "Nature Boy" is not in that list either. The list continues on AGAIN, A-Z... and viola, there is "Nature Boy." In the THIRD section of A-Z of the song list. Anyone, have a clue as to WHY the entire library of music is not listed alphabetically? But rather parceled out in sections?? None of the tracks are repeated, each section of A-Z contains different tracks!! It makes finding a song you are wanting to hear, a real chore!! And is NOT indicative of a world class company, nor a world class product.
And before anyone reads off their teleprompter as to how "I should check to see that my computer is blah, blah, blah......" It IS up-to-date. Every driver, every piece of software, every security definition, every release, every add-on. I spent an entire weekend making absolutely POSITIVE that THAT issue was resolved. Vista SP1, Windows Defender, IE7, Firefox 3, iTunes 8, eve-ry-th-ing!! Been there, done that, got the T-shirt. I'm looking for a little thing called "real answers." Thanks.
Message was edited by: Host

TS1363 Once again having trouble with my 6th gen nano not being recognized in ITunes on my Windows 8 computer

Can't decide if the nightmare called Windows 8 is the culprit. I'm reinstalling ITunes (for the 2nd time on this PC) and re-downloading all of my music to my computer. Hopefully I can get the new songs I purchased to show up on my IPod. If not, time to go back to my 1997 discman.

This came from another thread, but worked for me. Problem is with newest iTunes 4.62 and Windows 8.1. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

Is the latest update to the 6th gen nano a software download or does it come with the new watch faces and larger icons out of the box

Apple shows the new 6th gen nano with the new selection of watch faces and lager icons etc as per new update, but stores still have the 6th gen nano with just 3 watch faces and smaller icons etc. Is the newer spec just a software update that i do after purchase or does it come updated out of the box?
Thx

It should come out of the box with the new 1.2 update, but if it doesn't you can simply connect it to iTunes, download, and install the update from there.
B-rock

6th gen nano won't charge

I got my wife a new 6th gen nano. It operates just fine...as long as it's plugged into my PC. I can put songs on it, use the touch screen, etc. The display shows the battery with the plug icon on it, which I assume means it's plugged in, but not charging. As soon as I disconnect it, the ipod won;t work at all. No power ups, nothing at all. I tried resetting it when plugged in, but it made no difference. I've tried charging it on the PC via the USB cable, on my car charger for my 5th gen ipod, and using the AC adapter, but with no luck. Do i just have a bad battery or what?!

Take the iPod to an Apple store or an AASP. Whichever is more convenient for you.

TS1630 Hi I have a problem with my iPhone 4S, I have no sound from my speaker ,keyboard or notifications , and my volume control buttons are not working is anyone experiencing this? Any help would be great full, also I have reset the iPhone many times.

Hi I have a problem with my iPhone 4S I have no sound from my speaker , keyboard, notifications. or volume controls, I have reset my iphone many times and still the same, any advise will be greatful
Thanks

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

No sound from the speaker and missing speaker device listed with Window 7

I have Window 7 and with SB X-Fi card installed for a long time now but yesterday, there is no sound from the speaker which connected to the normal speaker output of the card. I check the output device and the specker device is missing. I tried to run the software but it says no device.
How do I correct the problem?
Thank you.

Take it to your local Apple Store along with US$149 for a replacement.

Sound from the speaker iPhone 4S 5.1.1. disappeared!?

About one hour ago I lost the sound from the speaker iPhone 4S 5.1.1. Lost in the middle of a conversation with a friend whom I put on speakerfon, first started to choking and after that sound is disappeared, and than appears in the fraction of a second and after is completely gone. On two occasions it choking when I put some videos and that's all. There is no sound even when someone call me, only vibrates. Note that phone was never dropped, as a new one, and I got it from July last year. Headphones works normaly. Any help without service?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
More Info Here > http://support.apple.com/kb/TS2802

Using old wall charger with new iPod Classic

I just got a new 80Gb iPod Classic to replace my old original 20Gb model. Can anyone tell me if the wall charger that came wiht the older model will work to charge the newer one?

Yes, it should work just fine. I'm still using the AC adapter and firewire cable from my 60 gig iPod Photo to charge my Touch, 3rd gen Nano and 60 gig iPod with Video.

No Sound From Center Speaker [Win 7]

$No Sound From Center Speaker [Win 7]? Hi,
I downloaded the Darkest of Days demo and noticed that the speech volume was very low if i positioned it center of the camera. But if i positioned it on the left or right of the camera, the speech volume would increase. I found it strange.
I closed the game. And ran my speakers through window's speaker test. Every speaker responded with a sound. Unconvinced, i opened a few songs. That's when i noticed the center speaker wasn't producing a sound. Even on 5. content (movies & music) the center speaker wouldn't work.
**bleep**, no wonder those AC3 movies had low speech and i had to manually boost the speech volume. I noticed the low sound in games before too...but i attributed it to the 5. surround thing. Guess i was wrong!
System Rig:
Intel Core 2 Duo E6400 @3.2Ghz
Gigabyte P965-DS3
[color="DarkOrange">ATi HD4850
Twinmos 3xGB DDR2 800Mhz + GB OCZ 800 MHz
Zalman 9700
Creative Audigy2 ZS
Creative Fatalty Gaming Headset
250GB Seagate SATA-II 7200.0 8MB
Enermax 535W PSU
Logitech X-540 5. Speakers.

Hi
Can you clarify that are getting the voice when you play the DVDs/CDs?If you are not getting the voice and you are getting the sounds only? Then there could be some connectivity issue for Center Speaker.Pl check the connections .. Regds Balu

No sound from right speaker on Pavilion g6-1353ea after installing Windows 8

I've had no sound from right speaker on my HP Pavilion g6-1353ea after installing Windows 8. I've checked all drivers, and have done the sound test in sound properties (left speaker beeps fine, but then nothing from the right). Anyone else having this problem/found a solution?!

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59154.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio in both speakers.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

In latest 2 days after update ios 5.01 my ipad2 suddenly restart when i reading from ibook, what happen with new update ?

In latest 2 days after update ios 5.01 my ipad2 suddenly restart when i reading from ibook, what happen with new update ?

Download the full version of the software then shift click the restore button. This will ask you where the firmware files are. Once you point to the firmware then you can install the official version

No sound from JBL speaker/charger with new 6th gen nano

Similar Messages

Maybe you are looking for