No sound from my pavilion DV5000 with windows8. Help me Please!

I,ve installed Windows 8 on mu Pavilion DV5000.
After the installation, no sound goes out from the PC, even if i've
reinstalled the sound drivers. What can i do to solve the problem?
Thank's for all.
Roberto

@mcneedham01,
Write down Your p/n number which is under Your computer and looks like this.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

High pitch hissing sound from 970A-G46 motherboard with AMD FX 8 core processor

I am getting high pitch hissing sound from 970A-G46 motherboard with AMD FX 8 core processor.
Sound is coming from some place near CPU area.
I tried changing Core C 6 State in BIOS from Enabled to Disabled to fix this issue.
I also followed steps in following link, w w w . tomshardware.com/forum/292915-30-high-pitched-noise-coming-area
No luck with above changes.
I heard this is a common problem with MSI motherboards. Is there any fix for this issue.

Quote from: flobelix on 12-January-13, 18:49:48
That is surely no typical problem of MSI mainboards. In fact that is very rare if it is the board.
Tke the board out of case on a non conductive surface with nothing else connected but but mainboard, ram, psu, cpu and vga. Try it again after clearing CMOS (>>Clear CMOS Guide<<)
If you are then 100% sure that it is the board this could be a defect as MSI mainbaords normally don't cause coil whine and I haven't heard that about 970A-G46 so far
I tried clearing CMOS by replacing jumper and loading factory defaults. Still high pitch sound is coming intermittently. As my 30 day period is over with Frys Electronics, How easy to get a replacement board from MSI. Does anyone know the steps?

I can't delete my bt emails or move them to folders, other emails from tiscali no problem with, anyone help please

I can't delete my bt emails or move them to folders, other emails from tiscali no problem with, anyone help please

I did that and it is currently whirring away, had over 16000 emails as everything got imported when I set emails up (only had this computer 5 days). So will see what happens when it stops doing whatever it is doing. Sorry if I appear stupid but first Mac I have owned so everything a bit new. Have managed to get most things working correctly just can't sort this BT email problem out. Will report back later!

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Sound from front speakers only with X-Fi in Game mo

Hope someone can help me with this. I just installed the latest x-fi drivers for my xtreme gamer on a fresh install of xp and now in when in Game mode I don't get any sound from the rear speakers. When I switch to entertainment mode I get sound from all my speakers. I have a 4. setup and have checked that this is selected in both the creative audio console and the windows control panel.
Is this a problem with the new drivers? Has anyone else got this problem or knows how to fix it's
Cheers.

you have to activate x-fi cmss 3d and try the options within

No 5.1 sound from Elite HPE-575a with Logitec X-530

Controller is IDT High Definition Audio CODEC.
Speakers/Headphone Properties, General Tab - Jack information does not match the actual inputs/outputs on back of PC.
Properties screen shows LR,LR, C Sub, RL RR -4 Jacks
Actual on PC has 6 jacks - in, out, mic, c/sub, rear, side
Connected by color code matched jacks and plugs, matched labelling, I.e. c/Sub in c/sub, rear in rear, Side in side.
I only get sound from center speaker and sub. Ideas? Suggestions?

This behaviour is by design:
SPDIF Digital Connections only carry 2 PCM signals, which means only stereo.<
Technologies like Dolby Digital/DTS and there PC-oriented Li've versions encode 5. signals into the 2 channels offered by the SPDIF standard. This is not supported in any Sound Blaster card at the moment.<
The receiver of your speaker system must support Dolby/DTS and decode it into PCM before it can be played back. (I assume, the GD-series Inspires, do that)<
As a result, you can only get 5. sound from a single SPDIF connection only when listening to Dolby Digital/DTS content, like DVDs and .ac3 files, and you select offcourse? SPDIF passthrough in either the DVD software or Creative's drivers.<

No output sound from output port/analog audio: Need help

hello, I want to connect my analog audio equipment to my iMac. I have done this in the past with my old G3. I have connected the RCA cables to a 3.5 mm jack and put it into the audio input port, which was what worked on the G3. When I open the sound page for input & output, on Output I can see the volume bar thing moving in relation to the sounds from mic, turntable, etc: all the analog audio things. However, there is no actual output of sound through the iMac;s speakers or a headphone. The output page is pretty simple so I am real sure I have all the rigt things checked, unchecked etc. Any ideas? Thanks.

I had what sounds like a similar problem to jazzzrat. i had my macbook setup to a stereo and it worked for over a year. suddenly no sound came out of the stereo. in my case, it definitely was a software setup thing.
plug in your stereo jack into the audio out port. then go to system preferences-->sound-->output. on there you should see, under "device for sound output": Name=Headphones, port=built-in output. (if you see name=built in speakers, you plugged in the wrong plug). Now go down to the bottom of the window and UNcheck the "mute" box, and make sure the volume slider is midway or more.
For some reason, mac allows you to mute the "headphones" and "built in speakers" selectively. we have no idea how that box got checked, that remains a complete mystery. but when we eventually found -- and unchecked -- the box, our stereo output came back just fine.
i hope this works for you. good luck and have a good new year.

I have no sound from x factor app on iPad, any suggestions please?

I have just downloaded the x factor App on my iPad. I have no sound. All my sounds are on, but for my keyboard..and. Not sure how to turn that back on as it's displaying on under settings in sounds. All sound from every other app is coming through. Any suggestions please?

Are you sure that you don't have system sounds muted? You will still have sound in the Music App and YouTube even with systems sounds muted.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Transfer Of Data from Sap to Oracle with the help of Enterprise Services.

Hello,
We want to transfer data from Sap to Oracle using standard Enterprise Services.Some fields were not available in the existing standard Enterprise Services,so we have enhanced the existing Services by writing code inside BADI available with Enterprise Services.Rest of the fields we have mapped with the existing fields available in standard Enterprise Services.But,the Oracle people want to fetch all data from Sap without entering any input as a mandatory field in the Enterprise Services.The existing standard Enterprise Services require to enter any field as mandatory and are not accepting the range in input for multiple records.e.g.All enterprise Services related to Sales Orders are displaying only one sales Order.We have searched all Enterprise Services for Sales Order(related to reading of data),but not able to find service which would display mutiple records without entering any input.ECC_SALESORDER009QR is the only service which is displaying multiple records without entering any input,but the required fields are not available in this service.So,kindly suggest what we need to do further.
1.Should we go for customization of services completely,so that it would fulfil our requirement.
2.Are there standard Enterprise Services exists which would we give us data in range(all records).
If they exists,please specify the names of Services for reading Purchase Order,Production Order,BOM etc.
Thanks & Regards,
Divya.

Hi Vaibhav,
Let me tell you the objective in detail.
Objective.
To develop a package solution which will work as a bridge between Oracle APS and SAP system so that customers using SAP will be able to use advantages of Oracle APS for their planning needs.
This will consist of following major components:
OA Templates is an Oracle utility to load data from any legacy system to Oracle APS using standard flat files.
Oracle has developed an Application Integration Architecture which is a standard architecture used for integration of Oracle products with other systems.
Enterprise services is an SAP utility to communicate with SAP.
AIA canonicals are standard canonicals developed by Oracle where we have to map data fields from destination system (Oracle APS) and source system (SAP)
Fusion middleware is being used to develop application interfaces following AIA standards.
Tasks at stake:
Mapping of Oracle APS fields and SAP Enterprise Service fields to AIA canonicals
Technical work of developing middleware using Oracle Fusion
From Sap side,we have to map fields which we have received from Oracle with the help of Enterprise Services,rest consumption of these services is done by Oracle guys.So,suggest is there enterprise services available which would give us multiple records .
Thanks & Regards,
Divya.

Zire72 is not working with vista. help me please.

I have a computer with Vista and a Zire72. I don't have the disk that came with it, and have tried to download the software from the website. I am not tech smart and need some simple directions and help. I have alot of money invested in my palm zire72 and love it but it just doesn't work with vista 64. what can I do?
Post relates to: Zire 72

I have sat here for 4 days reading and installing everything I was told to install to be able to sync with my palm. I am not smart about bluetooth or wi-fi. Geek squad came out and set up my wi-fi in my office. Can someone tell me or give me the A B C's of getting this thing to sync. I don't like the new phones that have everything on it. I love my palm because IT WAS SIMPLE TO USE AND SYNC. As bad as the economy is I hate to have just wasted $300.00 on a palm that I cannot get to work. . I have wasted alot of time reading and calling and installing and it still doesn't work. After about 8 hours today I got the desktop to download. No wonder palm is going under. Help me please !!!!!!!
Post relates to: Zire 72

TS2771 I can only hear sounds from my ipod touch with headphones plugged in.

I am only able to hear any sounds/music from my iTouch with the headphones plugged in to it. I have the change with buttons selected to "on". Am I missing something else?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

How do you sync sound from a digital recorder with video?

Can anyone tell me how to sync sound with video? Not a voice over but Voice recorded when video was shot. Voice was recorded on hand held digital recorder.

When you're shooting use the ciak , then when in imovie, sync the sound of ciak with the closing of it and you're done
If u havent's used , just seek for a sound or a part of speech witch is very evident to sing
Do it before cut video
hope helps
J

No sound from JBL speaker/charger with new 6th gen nano

I just received my ipod original replacement with a 6th gen, but when I put it into my old JBL on stage speaker/charger It did nothing,
Will I need a new speaker/charger or do they make a adapter from the old original to the new 6th gen ?

All I need is fact.
The fact of the matter is you won't know unless you at least try it just as the previous poster suggested that you do!
If you are worried about damaging your iPod, post in the iPhone forum area, call Apple Care, iPod tech support and read the user manual for the proper equipment to use.
iPod nano Troubleshooting Assistant
iPod Troubleshooting Assistant
Service Answer Center - iPod
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
iPod Manuals

No sound on my pavilion 5000 with windows 7

HP Pavilion 5000DV
In windows 7 there is no soundcard found.
How can get sound again?

Hi, John:
Try both of these:
This one first:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-540...
Try this one second, if the first one doesn't work.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=ob-47663-1&lang=en&c...&
Paul

No sound on HP Pavilion q014a with Windows 10 installed

I have just purchased this computer installed with Windows 8.1, which immediately upgraded to Windows 10 & after chatting with Microsoft, who couldn't provide an answer, and trying other options suggested by HP troubleshooting, I have still not had the slightest hint of any sound whatsoever.

Hi, John:
Try both of these:
This one first:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-540...
Try this one second, if the first one doesn't work.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=ob-47663-1&lang=en&c...&
Paul

No sound from my pavilion DV5000 with windows8. Help me Please!

Similar Messages

Maybe you are looking for