No Sound from Side Speakers on P7800

I just got my P7800 speker setup and installed. I have an Intel D95PBL motherboard with a built-in 7.1 sound card. I plugged in the four jacks on the sub woofer (center, front, side, center) to the four jacks on the sound card. I set the switch on the Sub Woffer to "Direct" for use with 7.1 sound cards.
I used Intel's Audio Studio application (http://www.intel.com/design/motherbd/software/ias/) to configure the sound card for 7.1 speakers. I then used their built in test sound to check the channels. The Front, Center/Sub, and Rear speakers all tested perfectly. When I tested the Side channel, I got nothing. No sound what so ever. The graph display for side speakers in the Audio Studio shows there is something being played but I hear nothing out of them.
Does anyone have any suggestions?
T

I am having the exact same problem!!! Please help, I am using a D95PBL motherboard, and i have the P7800 speakers. The problem is that there are four connectors on the side of the audio cable that connects to the sub woofer. However on the one going to the computer, the blue one is missing which is the side speakers one. Is there a reason for that?

Similar Messages

  • FAINT sound from Side Speak

    Hi! again, can someone help me configuring X-Fi Fatality & T7900 so that I have proper sound output from all 8 channels. Have Windvd 7. A very faint sound comes out from Side Speakers. When I test speakers, they seem GOOD with proper vol output through all channels. THX console also shows proper output of sound from all speakers. MP3 plays well, but When I play any DVD there is hardly any sound from side speakers. Tried every thing. Guess I am making a mistake in configuring setup. I tried using the below advise but still no go. -----------------------------------------------------------------------------2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.---------------------------------------------------------------------------- - X-Fi Fatality & Inspire T7900WinDVD 7WinXP Pro.?[color="#ff0000"]Please Guide

    Hi! again, can someone help me configuring X-Fi Fatality & T7900 so that I have proper sound output from all 8 channels. Have Windvd 7. A very faint sound comes out from Side Speakers. When I test speakers, they seem GOOD with proper vol output through all channels. THX console also shows proper output of sound from all speakers. MP3 plays well, but When I play any DVD there is hardly any sound from side speakers. Tried every thing. Guess I am making a mistake in configuring setup. I tried using the below advise but still no go. -----------------------------------------------------------------------------2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.---------------------------------------------------------------------------- - X-Fi Fatality & Inspire T7900WinDVD 7WinXP Pro.?[color="#ff0000"]Please Guide

  • Envy laptop confused about aux jack being plugged/unplugged; no sound from internal speakers

    So I was typing all normal like, didn't do anything stupid or weird, but suddenly the music I was playing through my laptop's internal speakers just stopped.
    And despite nothing being plugged in the auxiliary jack, the laptop thinks something IS plugged in and doesn't play sound through the internal speakers. So no sound at all.
    And on the flip side, when I plug headphones in the aux jack, the laptop says that "You have just unplugged a device from the audio jack" but then plays normally through the headphones. Internal speakers still silent.
    It's like the laptop suddenly got confused in whatever component registers the auxiliary connection, but I don't understand why it still plays through the headphones when it thinks there is nothing plugged in. And also why the internal speakers don't work AT ALL.
    It has Beats Audio, if that helps at all. I tried restarting, messing around with the sound settings but I honestly have no idea what I'm doing and anyways nothing has changed from that. 
    Anyways, yeah, help?
    This is a pretty new laptop, only about a month old.

    Hi @nematoda 
    Welcome to the HP Forums!
    It is a fantastic  place to find answers and tips.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that you have lost  sound  on the internal speakers and when you connect headphones you get the message that you disconnected the device but then plays sound through the headphones.
    Here is a link to No Sound from the Speakers (Windows 8) that may help to overcome this issue.
    If this has not been resolved I recommend contacting HP support for assistance as the notebook is only a month old.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck !
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • When i play a video or movie i get a buzzing sound from the speakers. how do i solve this problem?

    I get this  buzzing sound from my speakers when I play a video, or movie either from the internet or playing a DVD. What can I do to solve this problem

    A: There is no such thing as an unlocked iPhone 3Gs in the United States. ALL iPhone 3Gs's sold in the US are locked to AT&T. AT&T will NOT unlock iPhones, therefore it is not legitimately unlocked.
    B: Sprint is a CDMA network as others have mentioned. They do NOT use SIM cards. The iPhone 3Gs will NEVER work on Sprint. Ever. It's not physically possible.
    Either your Uncle misunderstood or he was mislead. Send it back and tell him to get his money back. Buy an iPhone in India from a supported carrier.

  • My mac desktop will not provide sound from internal speakers.  when I go to audio devices window it only shows airplay.  How can I get internal speakers back.

    My mac desktop will not provide sound from internal speakers.  When I go to audio devices window it only shows airplay.  How can I get internal speakers back.

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
    7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/Audio
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    14. Reinstall OS X after backing up all data.
    15. Make a "Genius" appointment at an Apple Store.

  • Very poor sound from internal speakers, very good on headphones.

    Hi,
    I hope you can give some advice.
    New to all this so apologies if protocols are broken etc
    New 20" imac, running Leopard.
    very thin, tinny sound from internal speakers (similar to hearing someone's else's walkman
    on the train). when I plug headphones in its great no probs.
    Advice please! I don't want to send it back I'm halfway through my assignment.
    Hadders

    I just realized I've never heard the internal speakers on my new iMac, I have always used good 2.1 speakers since I got my eMac years ago and the internals really sucked.
    I was just curious, have you heard anybody elses built in iMac speakers and did they sound better than yours or the same? Maybe at the Apple Store?
    I don't know, I just didn't know if they really improved them. Maybe other iMac users can chime in on internal speaker quality. The only reason I said all this was because you mentioned that headphones sound great, which is the same port that a set of external speakers would go.
    Sorry to hear you had to send it back for that. Here's hoping you didn't have to send it in for what the speakers really do sound like.

  • No sound from internal speakers on pavilion g7 running windows 7

    Previously had external speakers and they worked fine.  Headphones work fine. When those are unplugged I should get sound from internal speakers. I don't

    Hi,
    Check the link below:
    No Sound from the Speakers (Windows 7)
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • No sound from internal speakers on CQ50

    I've done all the diagnostics including installing updated driver and recover/restore, but still no sound from internal speakers.  However, when i plug in external speakers i get sound.  anybody know what i can do to get sound from internal speakers?  thanks

    Hi,
    Check the link below:
    No Sound from the Speakers (Windows 7)
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • No sound from internal speakers or headphone jack

    HP 15 notebook PC
    windows 8.1 64-bit
    not getting any sound from internal speakers at all. no sound from headphone jack. was working fine yesterday. updates to drivers are good. i can see sound signal in the speaker bar. please help.

    Hi,
    Can you post back with the full Model No. and Product No. of your Hp 15 series notebook - see Here for a guide on locating this information.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • No sound from internal speakers in HP Mini

    i can't hear any sound from internal speakers although if i connect headphones or external speakers i can hear sound!

    Hello  @Landon3400 ,
    Welcome to the HP Forums!
    I understand your notebook only has sound, through your headphones. 
    Try updating the driver with the following download and tell me if it resolves the issue: IDT High-Definition (HD) Audio Driver.
    Furthermore, check out this thread that has a lot of great suggestions for issues with no sound: Troubleshooting Guide: Audio does not Work after a Certain Period of Time and this document for no sound in Windows 8: No Sound from Speakers (Windows 8)
    It would help to know which product and operating system you are using.
    For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
    To see which version of Windows you are using click here: Which Windows operating system am I running?
    I look forward to your reply!
    Let me know if this helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • No sound from internal speakers after using audacity 2.02?

    No sound from internal speakers after using Audacity 2.02 ?

    Hey iberlin12,
    I would check out the article containing recommended troubleshooting steps for when you don't hear audio from a Mac's built-in speakers:
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/TS1574
    Best,
    Delgadoh

  • Problem with sound from internal speakers

    I have rescued an 867 hz TiBook from the trash heap. This machine was being discarded because it wouldn't wake up (just did this red, blue, yellow flashing thing, so it had to be restarted everytime it went to sleep) and because the internal speakers had stopped working. I took off the keyboard and flashed the pram, reset everything, wiped the hard drive and installed Leopard. This seems to have fixed the sleep issue but there is still no sound from the speakers.The headphone jack works fine, the built-in mic works and there IS an option for internals as the output in prefs, so it's not the headphone jack problem I've read about. I've searched and searched but I can't seem to find a solution that works... anyone have any ideas?

    Hi Mr. Waters,
    Welcome to Apple Discussions.
    You may want to at least follow the wires back from the speakers and see that they're connected, but it's likely the sound card which is unfortunately soldered onto the logic board. If so, the repair would mean replacing the logic board, rather expensive and not easy. Still a nice find for free.

  • Inspire T7900 no sound from side...

    Hi there, i've just buy an "Audigy2 ZSplatinium", an "Inspire T7900" and a "decoder DDTS-100"
    i've try to connect my sound card to my sub without the decoder, i don't have any sound from side speaker, if i switch rear and side speaker, the speaker itself works, but it seems the sounds don't come to the side...
    i've try to connect with the decoder, in analogic, and optical, same problem...
    when i try to calibrate the audio systeme, i can hear sound from front speaker (all 3), both rear, but when the programs wants to test side one, i got a horrible sound, like "HIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII III" at the place of the usual "left side" or "center".... i've try to finish the calibrate but the programs say my cable aren't connect well, i've RE-check all, it's good.....
    i've all deconnected, uninstalled, and RE- install ALL the syteme.... same problem
    I'm starting to become crasy.
    I don't know if the probl?me comes from my sound card or my audio sytme....
    PLS help me....

    stiaros,
    Not sure if you are able to install the EAX4 driver for your OEM card but you can try installing it - EAX 4.0 ADVANCED HD Driver Update for Creative Sound Blaster Audigy 2/Audigy 2 ZS. After you are done installing that, do a search for this filename CTPANEL.EXE, you should be able to configure the card through this.
    JasonMessage Edited by Jason-CL on 05-27-2005 06:08 PM

  • Soft sound from rear speakers while playing mov

    Hi,?Gaming and music is done via all speakers (i'm using analogue connection) just fine, but when i play a movie (using powerdvd 6?deluxe) i get faint sounds from the rear speakers. I had contact with creative's help desk in my country and we ran thru all system settings (e.g. thnx console). Everything was configured correctly., tho still a weak sound from rear speakers. They could not help me further ?I'm using a x-fi fatality soundcard with a logitech z-5400 speakerset.
    When running a movie it shows a logo near the system tray : dolby digital. I am hoping one of u has a solution to this problem. Greetz,?Nask

    In most of the cases, movies with mutichannel soundtrack do not use constantly every speakers. I think your case is normal and that's only your DVD's mix (as many DVD) that concentrates more on the front. try some of the sample there: http://www.digital-digest.com/dvd/do...s/trailers.phpIf the first one sound at the same level for each speakers then it's alright.

  • Odd clicking sound from the speakers

    There's a clicking sound from the speakers all the time, even when I'm not playing music. My PowerBook is only 1 week old, and I haven't dropped it or anything. Does anyone know what this is? Whenever I plug in my earphones or speakers, the sound stops.

    I wish I knew. Having the same problem. Comes and goes. Presently it's happening and it BUGS. In the past I've tried disabling some of my extra scripts and software (especially extra preference panes), but you're probably not in the same boat there, having such a new machine.
    Here's hoping someone has a solution!

Maybe you are looking for

  • Can I share addresses lists between 2 different iCloud users?

    Does anyone know if I can share address lists/books between two different iCloud users?  I know you can do this with a calendar, but I would like to do it with addresses too.

  • I desparately need to read a Japanese Clarisworks cwk file!

    Hello Folks; I am a volunteer with an anime convention. One of our japanese musical guests has sent us a list of tech requirements in a clarisworks file. I need to import it to something current (or find a place where i can buy something old ) that p

  • Jdeveloper and Oracle 8.1.6

    which Jdeveloper version will work with Oracle 8.1.6 and when it will be available? Jdeveoper 3.0 only work with Oracle 8.1.5.

  • HT5628 how to install mac os x lion on ipad 4?

    How do I install Mac OS X Mountain Lion on my Ipad 4 without Jailbreak??????

  • Oracle Patch Installation

    Dear Friends, I am installing the oracle 1g patch. I have downloaded the patches Patchset_10204_HPUX-IA64aa.bin  ab, ac and ad patches. I have copy these patch files in /tmp/oraclepatche directory and executed the command from ORA<SID> user as below