No sound from TV when AirPlaying Keynote from iPad

I'm AirPlaying a keynote presentation from my iPad Air to my Apple TV 3rd generation. There's a video in the Keynote and when it plays, there's no sound but I can still see the video. I addes a short audio track to the presentation as a test and it couldn't be heard either. I would try to see if they play on my iPad without AirPlaying it but the app crashes after the first slide, yet I'm able to get through the whole presentation when I'm AirPlaying it. I've tested other sounds on my iPad and they all AirPlay fine to my TV, it's just the Keynote presentation. Everything works fine on my iMac. Any help?

Nevermind. I knew I was doing something stupid. The iPad's ringer was on silent the whole time :/
But keynote still crashes on the second animation when I try to play the presentation on my iPad without AirPlaying it. I'd still like some help there if anybody thinks they can.

Similar Messages

  • If i delete an app on my ipad to save up space, but have it at home on my itunes library on my imac, will it also be deleted from there when i sync my ipad back to my imac itunes library?

    If i delete an app on my ipad to save up space, but have it at home on my itunes library on my imac, will it also be deleted from there when i sync my ipad back to my imac itunes library?

    No. What's on your iMac is a backup and you can re-install (re-sync).

  • My contacts have been transferred from my iPhone5 to iPhone6 . I now need to back them up in a new PC in a separate address book How can I do it without adding all contacts from Outlook when I synch  from iTunes ?

    My contacts have been transferred from my iPhone5 to iPhone6 . I now need to back them up in a new PC in a separate address book How can I do it without adding all contacts from Outlook when I synch  back from iTunes ?

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • No sound from TV when using HDMI from HP Envy Ultrabook4 despite downloading drivers

    Problem: When using an HDMI cord from my HP Envy Touchsmart Ultrabook 4 (4-1105dx)to connect to my TV to view movies, the video appears on my TV screen, but there is NO sound from the TV. Instead the sound comes from my lap top.
    Troubleshooting: I have looked under Sounds in the Control Panel, but the only choice listed is Speakers & Headphones IDT High Definition (which is the default) and does not allow sound from the TV when using the HDMI. I have also tried to download Driver and Audio Graphics, but wasn't sure which one & the ones which were downloaded have not solved the problem.
    Can you assist me? Which is the correct Audio/Graphic Driver to download? Or is there another possible reason why I cannot hear sound from my TV when using the HDMI to connect to my lap top?

    Hi,
    Please try this first to enable Speakers in Playback devices as follows:
    1. Right click speaker icon (bottom right hand corner)
    2. Select Playback devices
    3. Right click HDMI sound
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HELP!  My sound is distorted when I export from Final Cut Pro 10.3

    How do I use Compressor 4.1 with Final Cut Pro 10.3?  My sound is all distorted when I download!  HELP!!!

    You mean 10.0.3, I suppose. This is a VERY old version and it does not work in Mavericks; Compressor 4.1 is a recent version and maybe there is some incompatibility.
    You should update to 10.1.1, but 10.1 introduced significant changes. Before updating, follow these excellent recommendations and tutorials from Steve Martin and Mark Spencer:
    rippletraining.com/fcpx-features.html

  • No Sound in QuickTime when Slideshow Exported from iPhoto

    I'm currently using iPhoto 2.0.1 and QuickTime Player 7.1.3. When I export a slideshow from iPhoto to QuickTime, a '.mov' file is created. When I play it, I can view the slideshow but there's no sound. Does anyone know why?
    Here's how I export a slideshow...
    1) Create an album
    2) Add pictures to the album
    3) With the album selected, click 'Slideshow'
    4) Check/select 'Music'
    5) Select 'iTunes Library'
    6) Select a song
    7) Click 'Save Settings'
    8) With the album selected...
    File > Export > QuickTime > check/select 'Add currently selected music to movie' > Export
    By the way, the music in my iTunes library has been Imported from CD's I purchased and is in the format .m4a. Also, the music plays when I view the slideshow within iPhoto.
    Thanks!
    eMac   Mac OS X (10.4.8)   640 MB, 700 MHz PowerPC G4

    Robin,
    you have to find a way to "mend" the 4 songs together in iTunes, which I think can be done when you are importing from a CD. Essentially all 4 songs are one song.
    Another way to do this, and that is what I do all the time, I export many slideshows.
    This envolve the use of QT pro. And you have to cut an paste.
    For simplicity, say you have 240 pics and you want to put 4 songs of 1 minute each. It would be 60 pics per minute (assume that the disolve, does not play a role in time displayed). Assume you put 1 sec per slide.
    1-find the ending point of the song on the QTslide show.
    2- move the right cursor (small triangles usually sitting below the time bar) to the end of the song
    3-Notice which picture the song ended up on.
    4- Command+N and Command+V will paste the 1st song along with the 60 or so pics, (depending on display time per slide)
    Now go back to iPhoto, and select picture 61 to 130 (instead of 120- because the song could be longer that it take to display 60 or 62 pics.
    Select a new song #2, save settings bla bla bla
    Then export phots 60-120 with song #2.
    1-Open this QT file #2, and move the right "triangle" to the far right.
    2-Command +C (copy)
    Go back to the "previously pasted slideshow #1" and position the cursor at the end of the show- to the far right
    3-Command+V paste, the 2nd portion of the slide show #2 at the end of Slide #1.
    Repeat the process untill you are done.
    When done, save the file as a "self contained" file. That is very important.
    Sure enough you end up with a disolve to black, and fade in between each song, but that is the compromise, and it is not too bad to watch after all.
    It may seem complicated, but once you do it once or twice, you will do it with your eyes closed!
    I think there is also another way to do this, which would envolve exporting all the pics to QT in one shot, then cut and pasting the separate songs in the QT file using a similar method I described above. I tried in the past but was not successfull. I'm not too well verse with the Editing in QT.
    Michel

  • HT204291 Apple TV has huge lag when airplay music from iPhone 5, but video streaming is just fine.

    My new iPhone 5 has trouble with airplay music, however, it did perfectly with video sharing.
    Symptoms: In "Music" app, turn on airplay, tv screen shows the current playing song. But, it has a huge lag, time jumps every 2 second instead of continously roll over. Switch to "Pandora", same issue. But with youtube video, both video and sound appear very normal.
    I tried with my old iPhone 4, no problems at all. I'm pretty sure there's something wrong with the 5. Any idea how to fix this?

    Same here. Streaming from my MBA 2012 to apple tv3 works flawlessly, but any type of streaming with iphone 5 has huge lag. I have 10 mbps of internet dl speed and a cisco N broadband router. 

  • Sound not working when watching movies from MacBook Pro 15'' in full screen

    after a recent iTunes upgrade the sound will not work when I watch a movie or anything else in iTunes on my Thunderbold Display. I have the 15'' retina MacBook Pro connected to the display and it used to work flawlesly. has anyone had the same problem?

    When I upgraded the volume control in iTunes (at the top) defaulted to off (all the way left) so no sound.  I just slid the slider all the way to the right.  Also be sure display audio is set in the preferences, sound menu

  • Macbook disconnects from wifi when airplaying on Apple TV

    Hi! I've had this problem in the past. It somehow got back to normal for a while. Now, as soon as I connect my macbook to apple tv, it works, but it disconnects from the internet (but keeps on mirroring), which makes it impossible to stream a video on my apple tv, for example.
    So far, I've restarted the apple tv, my macbook and the airport extreme.
    Any idea what's going on?
    Thanks!
    Frank

    Yeah, I guess I could say it's been like that since a power outage 2 weeks ago. I'll try restarting the modem as well tomorrow morning. All of my stuff is plugged to batteries so I doubt anything would have been damaged. Thanks for the answer. I'll let you know how it goes.
    Frank

  • No Audio when Airplay Mirroring from Mac to Apple TV

    Hi Community,
    it happens that after disconnecting the aiplay mirroring the next streaming into the apple tv doesn't play the audio. it stays instead in the speakers of the Mac.
    i tried to change the output on audio preferences but i can't click on it! the selection just bounce back to internal speakers.
    the only way to fix this is to restart.

    This works: clicking "Restart". Thx! Please note, Apple bug fixers....

  • Mail, why doesn't it just delete from everywhere when I delete from iphone?

    This is another issue I can't seem to resolve. As per my other post about iCal, I expected my iphone to offer a seamless environment. I even, somewhat begrudgingly, would pay the $120 a year to mobileme if it did everything I want... sadly what I think I want is what the blackberry does!
    Anyway, to get more specific. I want to be able to only have to delete and email once (e.g. if I read it and delete it on the iphone I don't want it to still be existing on my mac) and I want my mac and iphone to effectively be two components of one integrated system. Is this possible with mobileme or anything else without having to set up a dedicated server using microsoft exchange?

    If you are dealing with IMAP or Exchange (ones that use ActiveSync) they will delete everywhere as those protocols do sync all up.
    If you are using POP, remember POP was not meant to be used from so many locations. It doesn't SYNC. It in a sense copies. There are advanced settings for your POP account though that you can say remove from server once moved out of inbox but note that won't happen until next poll.
    Your complaint has to do with the type of protocol your mail account uses.
    For me, I do most of my email that I care about having access to when not at work via gMail and gMail uses IMAP thus it does sync up. If I delete or move a message on the phone, it deletes/moves on the server, if I do it via the computer or mail client that I use to interact with gMail, it updates my phone. All nice and synced.
    So sounds like to me you are just using a POP account the POP protocol is very limited.
    Message was edited by: DaVBMan

  • Weird noise coming from computer when 'waking up' from sleep mode

    Hi everyone,
    I recently upgraded to Yosemite 10.10.1 - specs are in the attached photo below.
    Since yesterday, when I turn on my computer, or 'wake' it up from sleep mode, it makes a strange and noticeable whining noise. I've had the computer for around two months and it has never made such noises. The noise lasts for about 1-2 seconds. Aside from that the computer is operating as usual.
    I reset/shut down the computer several times and also did a PRAM reset. I have no idea what the issue may be and can't seem to find anything of relevance in the community. Should I go to an Apple Store? Is there something to be fixed or will the computer need to be replaced?
    Thank you all for your time!

    SSDee wrote:
    @Thor - I too like Acronis although one could use Windows Backup if so desired.
    Sleep mode -  I use sleep mode for scheduled recording of TV shows in Windows Media Center. If I shut down, no recording.
    Yea, waking up to do a recording is certainly a valid scenario.  I gave up on Windows Media Center right before they came out with an XBOX that is actually quiet and could be used as an extender.  We've been a TiVo family since those noisy XBOX days.
    Regarding sleep/hibernate, I just got tired of my machines waking in the Lenovo dock and having to reset application position, screen resolutions, and all of the other crap that seems to happen to ThinkPads on a resume.  That doesn't even take into account the black screen of death or other reliability issues I've seen over the years. 
    I am firmly a shutdown guy now.  It's clean and I know what I get when I press the power button again.  With 15-25 second boots and fast I/O, the reliability outweighs the perceived time savings.
    We haven't discussed what might be corrupting the original posters file system.  That is disconcerting.  Sounds like a Crucial M4 firmware issue.  If that is the culprit, there's going to be hell to pay on the mSATA M4 based Ultrabooks assuming it has the same bug.

  • Computer certificates expiring within 6 weeks disappearing from machines when computer certificates from two certificate authorities are present

    2008 R2 single tier enterprise certificate authority with root certificate expiring within 6 weeks, also domain controller
    2012 R2 single tier enterprise certificate authority with root certificate valid for more than the next year, also domain controller
    Both servers are approved as certificate authorities for the domain and can issue computer certificates using the computer certificate template. There is a group policy object applied to all workstations that contains an automatic computer certificate request,
    but the actual "certificate services client auto-enrollment" element is "not configured". This process seems to work like a round robin in that computers with no certificate can wind up with a certificate from either certificate
    authority. I need all PCs to have both certs for a DirectAccess migration. I have successfully used SCCM to ensure all PCs have both certificates using compliance rules and a script using certreq.exe.
    A machine will keep both certs until the older computer certificate moves into the 6 week window of expiration, then it gets purged. I have observed this behavior for over a month, even when the CA root certificate wasn't so close to expiring. I
    can't figure out what setting is triggering the purge, but need to stop it. Maybe it's coming from default settings in local machine policy for an element that should be disabled in the group policy object supplying the automatic certificate request?
    The worst part of this issue is that I can't recreate the purging behavior with gpupdates or restarts on my test machines.

    You should not be using Automatic Certificate Request Service (ACRS) for this - it was designed for Windows 2000 and is generally deprecated. Secondly, the reason it is acting like a round-robin as you describe it, is that templates are generally configured
    to attempt to renew within 6 weeks of their expiration. Since the 2008 R2 CA is expiring within 6 weeks, it cant issue anything longer than its own remaining lifetime. It is a well known issue that issuing a certificate within the renewal period will cause
    problems.
    What you should do it use AutoEnrollment and issue a certificate with a very small renewal period (1 week perhaps) by creating a custom V2 template and issuing that from your 2008 R2 CA. Then on the 2012 R2 CA you will need ANOTHER template, as the computer
    will only enroll for a certificate from each template. This one can be configured with a normal lifetime and renewal period.
    Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years. Connect with Mark at http://www.pkisolutions.com

  • Error when Saving FR Report from Studio when Making Changes from Client PC

    We get the following error when trying to save a report when using FR Studio from a Client PC: *"Expecting a transferable end, but received -4352: 2067198, expected: -4113, <-4098>, 8074 -4098"*. We do not get this error if we so a Save As instead of a Save.
    If we use FR Studio while remoted into the FR server, we do not get this error.
    Any idea what may be the cause of this error message?
    Thanks.
    Terri

    We had a similar issue on 11.1.2, which was never really resolved. Is this the version you are on?

  • How to remove movies from itunes when connected to my ipad 2,

    I ve a question regarding my ipad 2, I ve syncd some movies from my laptop to ipad 2 but nw i have deleted dem frm ipad but wenevr I connect ipad wid itunes it shows me dose movies again and bcz of tht i cant add odr movies. how 2 remove dese movies from itunes to add more movies.

    when the name of the ipad appears in ur itunes click on it. then click on the movies tab that appears next to summary. this is where u need to go to select what movies u want to actually sync to the ipad. if u keep movies selected then they will keep syncing over. if u unselect a movie from this list then it will unsync from the device. click apply at the bottom to save changes and sync.

Maybe you are looking for