No sound guy seem to know the answer, LOGIC AND VIDEO
so I thought I would repost it here!!
LOGIC AND VIDEO
I have video playback droupouts, even with just a few tracks Using Blackmagic DeckLink HD Extreme™ video card. Video is QT DV PAL, Sound 48K,... usual (for europe).
Is there some kind of buffer settings or other stuff to set up properly or is it just Logic which is not really good in video post prod?
Should I use soundtrack then?
Ok... so you have video drop out, not audio...
Why do you suggest using Soundtrack and Logic? And reference a sound-man?
You say the format is DV PAL... Drop-out (video) is usually caused by tape faults, or recording-head faults (un-clean etc). If your definition of video drop-out is the same as mine, I'd be surprised if there is anything you can do about it, as it is most likely a tape fault.
Similar Messages
-
Hi.
I have a problem with Quicktime (7.3). When I try to run the program I have the following error message:
+"Microsoft Visual C++ 2005 Runtime Library+
Program C:\....\quicktimeplayer.exe
A buffer overrun has been detected which has corrpted the program's internal state. The program cannot safely continue execution and must now be terminated"
It happened suddenly without installing anything. I've tryed uninstalling and installing again but the error still shows up.
No one seems to know anything about this problem including the almighty apple. What do I do now?Heh.... Double indemnity....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Walt F. Schaefer" <[email protected]> wrote in
message
news:fopvgt$a4q$[email protected]..
> Murray,
>
> FYI, those 2 links go to the same page. =8-0
>
> --
>
> Walt
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:fopuiq$92q$[email protected]..
>> Use a method similar to the one that lightbox uses.
>>
>> Place a positioned div over the entire grid, and
make the div invisible
>> with the style "display:none". Then you can have
each thumbnail do the
>> following -
>>
>> 1. Use the ChangeProperty behavior in DW to change
the display of that
>> overlay from display:none, to display:block
>> 2. Use the Set Text behavior on each thumb to
dynamically write the link
>> to the image into that div (see here -
>>
>>
http://dreamweaverresources.com/tutorials/settextoflayer.htm
>>
>> and a tutorial
>>
>>
http://www.dreamweaverresources.com/tutorials/settextoflayer.htm
>>
>> )
>>
>> It should work fine.
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>> ==================
>>
>>
>> "dxexaxnx" <[email protected]>
wrote in message
>> news:fopu4k$8hi$[email protected]..
>>>I have a grid of images. I want to rollover one
of the squares of the
>>>grid to a
>>> larger image that will cover the entire grid
completely. Is this
>>> possible? No
>>> one I know seems to know how to do this. Please
help!
>>>
>>
>
> -
Plz I need help I don't know what to do
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers. -
Please help me I just purchased an iTunes card and I want to use it immediatly
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if the instructions on this user tip helps you get them reset : https://discussions.apple.com/docs/DOC-4551 -
TS1702 Asking for security question to be answered that I don't know the answer to.
Itunes is asking fo security questions to be answered that I don't seem to know the answers to. Need help fixing this problem.
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551 -
hey guys i got a problem connecting with itunes always giving me ox80090318 if u know the answer please let me know thx
Hello Makiaveli,
It sounds like you are getting this error code when you are trying to access the iTunes Store.
I found this article with this error listed in the symptoms section, for you that should help troubleshoot the issue named:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Resolution
The cause for these issues is a program that monitors the Winsock protocol for Windows conflicting with Apple software. These programs usually use a Layered Service Provider (LSP) that can help identify the particular program installed. The programs that monitor this protocol have a variety of purposes, including security software, content filtering, and optimization of network traffic.
To find the LSP:
Download Autoruns for Windows from Microsoft
Look for Autoruns.ZIP and open the compressed folder.
After reviewing the contents and the license, drag autoruns.exe to the desktop.
Open Autoruns.
Click on the tab that says Winsock Providers.
A list of items should appear. A column showing the publisher should be available.
For items other than Bonjour, which is from Apple, check with the publisher for updates to resolve the conflict between their software and Apple software.
If the publisher is unfamiliar to you, you may be able to use the table below to find out more information about the origin of the modifications to Windows.
Some of the publishers and programs that are known to have versions with a conflict are listed below:
Product or Publisher
LSP Name
Bigfoot Networks / Killer Gaming
BfLLR over [MSAFD Tcpip [TCP/IPv6]]
Bsecure
Bsecure over [MSAFD Tcpip [TCP/IP]]
Bullguard
BGLsp over [MSAFD Tcpip [TCP/IP]]
Bytemobile, Inc.
BMI over [MSAFD Tcpip [TCP/IP]]
CA / Total Defense Internet Security
LAYERED_PROVIDER over [MSAFD Tcpip [TCP/IPv6]]
ContentWatch / Net Nanny
CWALSPSYS CWALSP MSAFD Tcpip [TCP/IP]
Covenant Eyes
Covenant Eyes Monitoring over [MSAFD Tcpip [TCP/IP]]
Dr. Web
DrWebSP.4 over [MSAFD Tcpip [TCP/IP]]
Earthlink Total Access
PropelLSP over [MSAFD Tcpip [TCP/IP]]
Eset
NOD32 protected [MSAFD Tcpip [TCP/IP]]
Fourelle Venturi
VENTURI_TP [MSAFD Tcpip [TCP/IP]]
FoxyProxy
FoxyProxy Service Provider over [MSAFD Tcpip [TCP/IP]]
Hide My IP / My Privacy Tools
My Privacy Tools - LSP over [MSAFD Tcpip [TCP/IP]]
MegaUpload / MegaKey
msadmid over [MSAFD Tcpip [TCP/IP]]
Netintelligence
NIHLSP over [MSAFD Tcpip [TCP/IP]]
Netscape Internet Service
SlipStream LSP over [MSAFD Tcpip [TCP/IP]]
Netsweeper
Liger over [MSAFD Tcpip [TCP/IP]]
Norman/Norman Security Suite
NLF over [MSAFD Tcpip [TCP/IP]]
Panda AntiVirus
PAV_LAYERED over [MSAFD Tcpip [TCP/IP]]
PC Tools / Spyware Doctor
PCTOOLS over [MSAFD Tcpip [TCP/IP]]
PureSight Internet Content Filter
Winsock over MSAFD Tcpip [TCP/IP]
Ratajik Software StationRipper
AVSDA over [MSAFD-Tcpip [TCP/IP]
Safe Eyes / McAfee Family Protection
Internet Content Filter over [MSAFD Tcpip [TCP/IP]]
Sendori
SendoriLSP over [MSAFD Tcpip [TCP/IP]]
SpeedBit Video Accelerator
SBLSP over [MSAFD Tcpip [TCP/IP]]
TellyAbroad
EasyHideIP over [MSAFD Tcpip [TCP/IP]]
Trend Micro
Trend Micro LSP over [MSAFD Tcpip [TCP/IP]]
VMWare
VMCI sockets DGRAM
Wave / Embassy Trust Suite
Wave Systems Kerberos LSP over [MSAFD Tcpip [TCP/IP]]
XFire
Xfire_LSP MSAFD Tcpip [TCP/IP]
Once you've identified the third-party software that installed the LSP, you should check for updates. If the software is your security software, see iTunes: Troubleshooting security software issues for additional information.
Bytemobile is usually associated with cellular data connection software. You may want to check if your provider has instructions to disable or uninstall that portion of the software, such as these instructions from AT&T.
Note: If unsure on the origin of your LSP, you may try to locate vendor information to determine which software is responsible for the non-default value here.
Thank you for using Apple Support Communities.
Cheers,
SterlingD -
I can't seem to log in as it's asking me two security questions which i don't know the answer to
i can't seem to log in as it's asking me two security questions which i don't know the answer to
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
Problems with importing films in iMovie11. Who knows the answer?
How can I import films from my Sony DCR-SR36 videocamera in iMovie11? I've problems with trying this. Only once iMovie recognized my camera but didn't import sound. The other times I tried I used the import function of iMovie11 and saw the several MPEG files but weren't able to import them. Who can help me out, or is it not possible in any way?
Thanks!
Eric Schoorl
NetherlandsHi Beth,
Thank you very much it worked.
Regards Brian
Date: Tue, 15 Sep 2009 21:27:59 -0600
From: [email protected]
To: [email protected]
Subject: Who knows the answer to divide te text in equal distance from my spry?
Hi, here is the rule to change in the CSS stylesheet:
ul.MenuBarHorizontal li
margin: 0px;
padding: 0;
list-style-type: none;
font-size: 83%;
position: relative;
text-align: left;
cursor: pointer;
width: auto; /change this from a measure to auto*/
padding-left: 1em; /*add padding-left to space the items out /
float: left;
If you are going to have drop down menus, there will be more things to change, but this should do the trick for a single row menu.
Beth
> -
I have a question that I think I know the answer to, but am looking for confirmation. I have a desktop computer at home that has clip art loaded onto it. I recently got an iPad and am looking for something similar. I assume I need to get an APP for it, and if that is correct, does anyone have one that they like?
Sort of. There is an app called art shop that gives you a place to park clip art. But I don't think you really need it.
If you have a collection of clip art you want available, move it to the camera roll on your pad/ phone, then copy paste into your document the clip you want.
You can get them into the camaera roll by putting them in a single event in your picture library and syncing them over, or e mail them to your self, and save to the camera roll, or send them to drop box, and bring them down that way.
The challenge is getting them all in one place to make it easy for you to find, which is why syncing might be the best approach in the long run.
As near as I can tell there is not a ready made clip art collection in app format laying around. -
When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb. The records contained in excel file is 4000 records. When taking the excel records and copy to new excel file the excel file size is 3.5 mb only.Why does the oracle software generates 20mb file?
Does any one knows the answer please advice?Hello,
This issue is because the Excel output from BI Publisher is MHTML (XML Publisher generates XHTML) not binary .xls.
MHTML and XHTML are more verbose formats than binary .xls.
It will be large because the current Excel output is just an HTML and not compressed like PDF. Please use the workaround (save it as .xls file). This is a known limitation of RTF layout templates.
BI Publisher Enterprise has a new feature True Excel Templates. The layouts generate binary Excel output.
Excel Output File Size Generated By BI Publisher is Very Large (Doc ID 760437.1)
Bogdan -
how can i add a secure email address to my account if i don't know the answers to my security questions?
I don't know either! I NEED HELP CAUSE I PUT MONEY INTO IT and they ask for my SECURITY QUESTION ANSWERS! When I try to change my security questions, which i forgot, they askk me for the ANSWERS TO MY SECURITY QUESTIONS!!!!!!!!!! I CAN"T DO IT IF I DON"T KNOW IT!
-
A few tears ago my Dad bought the ipod 3rd generation. He made an apple id on there and answered the securtiy questions with no problem. Then he gave the ipod to me. I downloaded music on it. Then last year i got my iphone and i didnt want to make a new apple id because i wanted to keep my music. So then all was fine. Then over the summer the off button on my phone wasnt working, so i went to apple and got my phone replaced. They put the card from my old phone into the new one. Now I have my own apple id. Now, every time I try to buy music or an app, it asks me for my security questions. They're questions that i never answered with my apple id, theyre the same questions my dad answered with his broken apple id, which he doesnt know the answers to either. Every time I call apple its no help and I have a lot money just sitting there in my account. PLEASE!!! IS THERE ANY WAY TO CHANGE THE DUMB SECURIY QUESTIONS?!?!?!?!?!?
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(95741) -
I signed into my Apple ID on a new phone and I already had it on my iPod. When I signed into the new phone it won't let me buy anything unless I know my old security questions but I don't know the answers to them. How can I get past those or change them?
See Kappy's great User Tips.
See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
Cheers, Tom -
I no longer have access to my icloud email and don't know the answers to my security questions. Does anyone know how to work around this to reset my icloud ID without losing my info? I haven't backed up in a year because of this.
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(123381) -
I had an iPod touch in the past and used an iTunes card to purchase songs, I now have the iPhone and again bought an iTunes card to purchase things. Since I have not purchased anything on this device yet it is asking me two security questions that I don't know the answers to. What do I do?
The Security Questions are not associated with your device - they are associated with your iTunes account/AppleID. If you cannot remember what you originally set up for your security questions, here are the instructions for getting them reset. First set are for if you set up a Rescue Email address, second set are for if you did not.
Here's the link:
https://discussions.apple.com/thread/4286784
Cheers,
GB
Maybe you are looking for
-
Gt70: after installing windows 8.1 read speed is slow :(
Hi guys, I got my MSI GT70 with the 128*3 SSD + 1024 HDD configuration. It can only get a read speed around 740 MB/s in hdtune. but before i install windows 8.1 (i install it from scratch reformating the whole system) the read speed was around 1100 m
-
How do i delete a word document using shortcut?
I have just bought a MacBook air & have installed Word etc onto the machine. I cant find how to delete documents in Word, it used to be easy!
-
So when i go to a webpage it shows only some pictures. Nothing on instagram or pinterest. Facebook ok though. An d then i can't download apps that need to be updated or new. I can't restore my magazine purchases. Was happening even before latest soft
-
Kanban - External procurement with multiple vendor
Hi Gurus, We are working on implementation of Kanban for external procurement (Scheduling agreement) in my organisation. As per the business requirement, some of the components are supplied by more than one vendor. As per the standard process, Kanban
-
Hi I am working on SAP NetWeaver 2004s SP 17. I am trying to enable the registry; actually I moved through: SOAMANAGER -> Business Administration -> Web Service Administration and searched for Consumer Proxy ServicesRegistrySi. This procedure is a re