No Sound HP 655 Windows 7 Pro 64-bit
I have no sound but I have stumbled across a slow unsatisfactory workaround.
I need help getting this fixed correctly.
OS: Windows 7 Pro 64 6.1.7601 SP 1 build 7601
Prod Name: HP 655 Notebook PC
PN: (prod number) : C1B96UT#ABA
Whenever I power-up the system after a shutdown. I have no sound.
I found that doing the following gets sound working
1. boot system
2. login and go to Control panel->Programs->Programs and Features
Uninstall "Realtek High Definition Driver" (it is version is 6.0.1.6577)
A Pop-up says you must restart computer to have the setting take effect
So I click "YES"
3. After the restart
login and after a minute or so a pop-up says:
"Realtek High Definition Audio, Device Driver installed successfully"
The same "Realtek High Definition Driver" Version 6.0.1.6577) is what got installed again.
4. Now I have SOUND.
I can now restart the system any number of times and the sound still works.
BUT if I shutdown then there is no sound the next time up.
I have gone to hp.com/support to look for latest driver and it is 6.0.1.6577.
Any help getting this fixed properly will be appreciated.
Had the same problem with HP 655 mentioned here by DFCD and others. Reinstalled the computer (W7 32bit and also 64bit, too) and even without doing anything, the scheme was always the same - first start after turning off = audio does not work (s/pdif only, speakers "not plugged in"); first and any subsequent restarts = all good.
So tried to flash bios to a different version - I had F29, flashed to F27. Now everything works as expected.
Hopefully, it works for you, too.
Similar Messages
-
I installed Windows 8 Pro 64 bit, now there is no sound.
I have a HP 620 Laptop pc, WZ257UT#ABA. I installed Windows 8 Pro 64 bit, now there is no sound.
I tried all the downloads, including hard reboot. Defaulting bios,etc.
Any possible solutions? I need this going by DEC 24.
Everything else is working fine that I can tell.
Thanks in advance.More than likely it is a driver compatibility issue with Windows 8.
Did you purchase your notebook before or after October 1, 2011? If you purchased it prior to this date HP will not be producing drivers for the notebook, but the hardware manufacturer may. If the product was purchased after that date you'll just need to watch the product's software and driver page for the drivers to be released.
Here is more information about the upgrade from Windows 7 to Windows 8.
Upgrading from Windows 7 to Windows 8
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
USB MIDI not working in Windows 7 Pro 64-bit
The problem is that even though my devices are recognized in Control Panel/ Sound and in Device Manager, no MIDI data actually flows and I cannot sync my keyboard to the Yamaha software that edits it. The error message in the Yamaha software reads
“The following MIDI ports can not be opened at this time”. At first, MIDI was working and I could sync up, but after about a week, right around the time I uninstalled and re-installed a MS Lifecam, it failed and has not worked since.
I have been working directly with Yamaha tech support on the issue for some time. I have a Yamaha SX70 XS keyboard, which is recognized by Windows as a connected USB device. It is self-powered, not powered by USB. I am using the Yamaha USB-MIDI driver version
3.1.2 for Windows 7 64-bit (the latest driver). And the latest versions of all their editing software for Win7 64-bit. They assure me that those work for other users of Win7 64-bit. In my case though, everything shows up in Windows, but MIDI doesn’t actually
work. And I cannot sync to the keyboard due to the above error message.
Yamaha tells me that their USB-MIDI driver is installing fine on my machine, except that it’s missing a windows driver at the bottom of the driver stack. (You can see this in Device Manager, Properties/Driver tab, then Driver Details. The missing driver
is ksthunk.sys, which I think handles kernel streaming. Sounds like that would relate to MIDI data. They have never heard of this driver not showing up there, and they cannot reproduce the problem. ksthunk.sys is on my machine in c:\windows\system32\drivers\
and in the registry the image path is \SystemRoot\system32\drivers\ksthunk.sys
All devices are “working properly” in Windows Device Manager, despite that missing driver. Yamaha MIDI Driver is shown in Control Panel/Sound, and it can be worked with there (opened, closed, configured, etc.). I have also tried three different USB
cables (but those shouldn't be an issue since the keyboard is showing up in Windows).
I was also advised by Yamaha to edit registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32 and remove all midi, midi1, midi2, etc entries, then uninstall and reinstall all drivers. Which I did, but it didn't help.
So far, no amount of re-installation, event viewing, uninstalling devices, numerous reboots,etc has fixed it. On this machine, that driver just doesn’t hook up to the Yamaha MIDI driver and show up in the stack.
So it looks like it may be a Windows 7 config problem on my machine, and I'm hoping someone here can give me some advice on how to fix it. The Microsoft forums contain a fair number of users reporting similar problems, some are audio and some are webcam
related. I've followed those threads, and done several of the suggestions, but haven't found a solution to this one.
This is a Dell XPS 8300 Windows 7 64-bit PC with all the latest updates, only about six weeks old. I've been struggling with the MIDI problem for most of that time. I'm an IT professional (network and systems admin), so you can be fairly technical
in your response.
Any suggestions will be welcome. Thanks in advance.I am so glad I found keyman7's description, since I have exactly the same problem.
The problem is not related to MIDI output! I have it with a pure USB-MIDI-input device (keyboard), whichs produces "unknown externeal error" every time I try to select it as input. The same thing occurs with a USB-MIDI-Cable.
I compared the driver details from my system (Dell T1500 windows 7 pro 64 bit) with those of another windows 7 pro 64 bit. On that other system the device works like a charm (so it is not the hardware, either).
On the other system I find ksthunk.sys in addition to the modules that are listed on my system as well (beeing \windows\system32\drivers\drmk.sys, ..\prtcls.sys, ..\USBAUDIO.sys and \windows\system32\SysFx.dll, ..\WMALFXGFXDSP.dll).
Can it be some other USB driver is interfering with this driver stack? I have no idea how to figure out which one it could be. Or, it has been suggested in other threads with somewhat similar looking symptoms, ksthunk.sys has been removed as UpperFilters
entry?
Help - please! -
WIndows 7 Pro 64 bit rebooting after installing flash player 11.4
Hi There,
I was wondering if anyone could help me to solve the problem I am encountering with my home computer which after installing adobe flash player keeps on rebooting soon after it gets to the logon screen and other times whilst I am playing CSS via Valve or browsing the net.
Motherboard: Republic of Gamer ASUS Maximus Formula ii
CPU: Intel Core 2 Quad Q9550
GPU: ATI Saphire 4850 HD
OS: Windows 7 Pro 64 bit
Memory: 8 GB
Disk: 240 GB SSD
AV: McFee
If you could help me to solve this problem would be greatly appreciated.
Thanks
FernandoHi Jeromie,
Here is the driver details and dxdiag file attached.
System Information
Time of this report: 10/11/2012, 17:57:52
Machine name: PACMAN_PC
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: Maximus II Formula
BIOS: BIOS Date: 07/27/09 14:30:55 Ver: 08.00.14
Processor: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (4 CPUs), ~2.8GHz
Memory: 8192MB RAM
Available OS Memory: 8192MB RAM
Page File: 2154MB used, 14226MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems found.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: ATI Radeon HD 4800 Series
Manufacturer: Advanced Micro Devices, Inc.
Chip type: ATI display adapter (0x9460)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9460&SUBSYS_E115174B&REV_00
Display Memory: 756 MB
Dedicated Memory: 1013 MB
Shared Memory: 3839 MB
Current Mode: 1920 x 1200 (32 bit) (59Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: L246WHX
Monitor Id: GSM569D
Native Mode: 1920 x 1200(p) (59.950Hz)
Output Type: DVI
Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1129 (English)
Driver Version: 8.970.100.3000
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 7/4/2012 17:25:14, 1081856 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-D720-11CF-9270-1FC1BEC2C535}
Vendor ID: 0x1002
Device ID: 0x9460
SubSys ID: 0xE115174B
Revision ID: 0x0000
Driver Strong Name: oem13.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_RV7X:8.970.100.3000:pci\ven_1002&dev_9460
Rank Of Driver: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Sound Devices
Description: Speakers (High Definition Audio Device)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_11D4&DEV_989B&SUBSYS_10438334&REV_1003
Manufacturer ID: 1
Product ID: 65535
Type: WDM
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Other Files:
Driver Provider: Microsoft
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: Digital Audio (S/PDIF) (High Definition Audio Device)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_11D4&DEV_989B&SUBSYS_10438334&REV_1003
Manufacturer ID: 1
Product ID: 65535
Type: WDM
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Other Files:
Driver Provider: Microsoft
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: Digital Audio (HDMI) (High Definition Audio Device)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_11D4&DEV_989B&SUBSYS_10438334&REV_1003
Manufacturer ID: 1
Product ID: 65535
Type: WDM
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Other Files:
Driver Provider: Microsoft
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
Description: Microphone (Microsoft LifeCam VX-1000.)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: USBAUDIO.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
Date and Size: 11/20/2010 03:43:54, 109696 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Description: Microphone (High Definition Audio Device)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Description: Microphone (High Definition Audio Device)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Description: Line In (High Definition Audio Device)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: HdAudio.sys
Driver Version: 6.01.7601.17514 (English)
Driver Attributes: Final Retail
Date and Size: 11/20/2010 03:44:24, 350208 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: G9 Laser Mouse
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC048
FF Driver: n/a
Device Name: G9 Laser Mouse
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC048
FF Driver: n/a
Device Name: G9 Laser Mouse
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC048
FF Driver: n/a
Device Name: Logitech Gaming Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC221
FF Driver: n/a
Device Name: Logitech Gaming Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC221
FF Driver: n/a
Device Name: G15 Keyboard
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC222
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x3A36
| Matching Device ID: usb\root_hub
| Service: usbhub
|
+-+ Generic USB Hub
| | Vendor/Product ID: 0x046D, 0xC223
| | Location: Port_#0002.Hub_#0007
| | Matching Device ID: usb\class_09
| | Service: usbhub
| |
| +-+ USB Input Device
| | | Vendor/Product ID: 0x046D, 0xC222
| | | Location: Port_#0004.Hub_#0010
| | | Matching Device ID: generic_hid_device
| | | Service: HidUsb
| | |
| | +-+ HID-compliant device
| | | | Vendor/Product ID: 0x046D, 0xC222
| | | | Matching Device ID: hid_device
| | | |
| | +-+ HID Keyboard Device
| | | | Vendor/Product ID: 0x046D, 0xC222
| | | | Matching Device ID: hid_device_system_keyboard
| | | | Service: kbdhid
Gameport Devices
PS/2 Devices
+ HID Keyboard Device
| Vendor/Product ID: 0x046D, 0xC048
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ HID Keyboard Device
| Vendor/Product ID: 0x046D, 0xC221
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ HID Keyboard Device
| Vendor/Product ID: 0x046D, 0xC232
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ Logitech HID-compliant G9 Laser Mouse
| Vendor/Product ID: 0x046D, 0xC048
| Matching Device ID: hid\vid_046d&pid_c048&mi_00
| Upper Filters: LMouFilt
| Lower Filters: LHidFilt
| Service: mouhid
|
+ HID-compliant mouse
| Vendor/Product ID: 0x046D, 0xC231
| Matching Device ID: hid_device_system_mouse
| Service: mouhid
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 127.0 GB
Total Space: 228.8 GB
File System: NTFS
Model: SanDisk SDSSDX240GG25 ATA Device
Drive: D:
Free Space: 165.6 GB
Total Space: 228.8 GB
File System: NTFS
Model: OCZ-AGILITY3 ATA Device
Drive: E:
Free Space: 312.0 GB
Total Space: 476.9 GB
File System: NTFS
Model: ST3500413AS ATA Device
Drive: Z:
Model: BENQ DVD DC DW220S ATA Device
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes
System Devices
Name: High Definition Audio Controller
Device ID: PCI\VEN_1002&DEV_AA30&SUBSYS_AA30174B&REV_00\4&239521B6&0&0108
Driver: n/a
Name: Intel(R) ICH10 Family PCI Express Root Port 3 - 3A44
Device ID: PCI\VEN_8086&DEV_3A44&SUBSYS_82D41043&REV_00\3&11583659&0&E2
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A36
Device ID: PCI\VEN_8086&DEV_3A36&SUBSYS_82D41043&REV_00\3&11583659&0&EA
Driver: n/a
Name: Intel(R) 4 Series Chipset Processor to I/O Controller - 2E20
Device ID: PCI\VEN_8086&DEV_2E20&SUBSYS_82D31043&REV_02\3&11583659&0&00
Driver: n/a
Name: ATI Radeon HD 4800 Series
Device ID: PCI\VEN_1002&DEV_9460&SUBSYS_E115174B&REV_00\4&239521B6&0&0008
Driver: n/a
Name: Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40
Device ID: PCI\VEN_8086&DEV_3A40&SUBSYS_82D41043&REV_00\3&11583659&0&E0
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A35
Device ID: PCI\VEN_8086&DEV_3A35&SUBSYS_82D41043&REV_00\3&11583659&0&E9
Driver: n/a
Name: Intel(R) 82801 PCI Bridge - 244E
Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_82D41043&REV_90\3&11583659&0&F0
Driver: n/a
Name: High Definition Audio Controller
Device ID: PCI\VEN_8086&DEV_3A3E&SUBSYS_83341043&REV_00\3&11583659&0&D8
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A34
Device ID: PCI\VEN_8086&DEV_3A34&SUBSYS_82D41043&REV_00\3&11583659&0&E8
Driver: n/a
Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_11AB&DEV_6121&SUBSYS_612111AB&REV_B1\4&116B1340&0&00E4
Driver: n/a
Name: Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
Device ID: PCI\VEN_8086&DEV_3A3C&SUBSYS_82D41043&REV_00\3&11583659&0&D7
Driver: n/a
Name: Intel(R) ICH10 Family SMBus Controller - 3A30
Device ID: PCI\VEN_8086&DEV_3A30&SUBSYS_82D41043&REV_00\3&11583659&0&FB
Driver: n/a
Name: Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller #2
Device ID: PCI\VEN_11AB&DEV_4364&SUBSYS_81F81043&REV_12\4&210273A0&0&00E3
Driver: n/a
Name: Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
Device ID: PCI\VEN_8086&DEV_3A3A&SUBSYS_82D41043&REV_00\3&11583659&0&EF
Driver: n/a
Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_8086&DEV_3A26&SUBSYS_82D41043&REV_00\3&11583659&0&FD
Driver: n/a
Name: Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
Device ID: PCI\VEN_11AB&DEV_4364&SUBSYS_81F81043&REV_12\4&1C95CDEB&0&00E2
Driver: n/a
Name: Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A
Device ID: PCI\VEN_8086&DEV_3A4A&SUBSYS_82D41043&REV_00\3&11583659&0&E5
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A39
Device ID: PCI\VEN_8086&DEV_3A39&SUBSYS_82D41043&REV_00\3&11583659&0&D2
Driver: n/a
Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_8086&DEV_3A20&SUBSYS_82D41043&REV_00\3&11583659&0&FA
Driver: n/a
Name: VIA USB eXtensible Host Controller
Device ID: PCI\VEN_1106&DEV_3432&SUBSYS_34321106&REV_03\4&8372D40&0&00E5
Driver: n/a
Name: Intel(R) ICH10 Family PCI Express Root Port 5 - 3A48
Device ID: PCI\VEN_8086&DEV_3A48&SUBSYS_82D41043&REV_00\3&11583659&0&E4
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A38
Device ID: PCI\VEN_8086&DEV_3A38&SUBSYS_82D41043&REV_00\3&11583659&0&D1
Driver: n/a
Name: Intel(R) ICH10R LPC Interface Controller - 3A16
Device ID: PCI\VEN_8086&DEV_3A16&SUBSYS_82D41043&REV_00\3&11583659&0&F8
Driver: n/a
Name: VIA 1394 OHCI Compliant Host Controller
Device ID: PCI\VEN_1106&DEV_3044&SUBSYS_81FE1043&REV_C0\4&1B359D48&0&18F0
Driver: n/a
Name: Intel(R) ICH10 Family PCI Express Root Port 4 - 3A46
Device ID: PCI\VEN_8086&DEV_3A46&SUBSYS_82D41043&REV_00\3&11583659&0&E3
Driver: n/a
Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A37
Device ID: PCI\VEN_8086&DEV_3A37&SUBSYS_82D41043&REV_00\3&11583659&0&D0
Driver: n/a
Name: Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
Device ID: PCI\VEN_8086&DEV_2E21&SUBSYS_82D31043&REV_02\3&11583659&0&08
Driver: n/a
DirectShow Filters
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514
WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514
WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514
MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514
WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.17514
Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
ffdshow Video Decoder,0xff800001,2,1,ffdshow.ax,1.01.4369.0000
ffdshow raw video filter,0x00200000,2,1,ffdshow.ax,1.01.4369.0000
ffdshow Audio Decoder,0xff800001,1,1,ffdshow.ax,1.01.4369.0000
ATI Ticker,0x00200000,0,1,Ticker.ax,
DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514
Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.17713
WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514
AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.17713
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.17713
SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.17713
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
ATI MPEG File Writer,0x00200000,1,0,atimpenc.dll,12.05.0000.20704
ATI MPEG Video Decoder,0x005fffff,1,2,atimpenc.dll,12.05.0000.20704
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528
Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514
SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.17713
MMACE ProcAmp,0x00200000,0,2,MMACEFilters.dll,
DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.17713
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514
ATI MPEG Audio Encoder,0x00200000,1,1,atimpenc.dll,12.05.0000.20704
AMD MJPEG Decoder,0x00800001,1,1,atimpenc.dll,12.05.0000.20704
ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.17713
Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.17835
Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.17713
Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.17713
ATI MPEG Video Encoder,0x00200000,1,1,atimpenc.dll,12.05.0000.20704
ATI MPEG Multiplexer,0x00200000,2,1,atimpenc.dll,12.05.0000.20704
VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514
WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514
MMACE SoftEmu,0x00200000,0,2,MMACEFilters.dll,
File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514
iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7601.17514
iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7601.17514
ATI Video Scaler Filter,0x00200000,1,1,atimpenc.dll,12.05.0000.20704
DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.17835
MMACE DeInterlace,0x00200000,0,2,MMACEFilters.dll,
Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.17835
AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.17713
RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514
ffdshow Audio Processor,0x00200000,1,1,ffdshow.ax,1.01.4369.0000
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.17514
Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.17514
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528
Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.17835
AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.17713
Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.17713
ffdshow subtitles filter,0x00200000,2,1,ffdshow.ax,1.01.4369.0000
ATI Video Rotation Filter,0x00200000,1,1,atimpenc.dll,12.05.0000.20704
Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528
AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.17713
File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.17713
File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.17713
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514
Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.17514
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.17713
WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514
ffdshow video encoder,0x00100000,1,1,ffdshow.ax,1.01.4369.0000
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.17713
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514
ffdshow Video Codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514
VMnc v2,0x00200000,1,1,qcap.dll,6.06.7601.17514
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
ATI MPEG Audio Encoder,0x00200000,1,1,atimpenc.dll,12.05.0000.20704
IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
PCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.17713
CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.17713
Audio Capture Sources:
Microphone (Microsoft LifeCam V,0x00200000,0,0,qcap.dll,6.06.7601.17514
Line In (High Definition Audio ,0x00200000,0,0,qcap.dll,6.06.7601.17514
Microphone (High Definition Aud,0x00200000,0,0,qcap.dll,6.06.7601.17514
PBDA CP Filters:
PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528
PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.17713
WDM Streaming Capture Devices:
HD Audio Muxed capture,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Microsoft LifeCam VX-1000,0x00200000,0,1,LcProxy.ax,3.20.0240.0000
Microsoft LifeCam VX-1000.,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
WDM Streaming Rendering Devices:
HD Audio HDMI out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
HD Audio Speaker,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
HD Audio SPDIF out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514
Video Capture Sources:
Microsoft LifeCam VX-1000,0x00200000,0,1,LcProxy.ax,3.20.0240.0000
Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708
PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708
WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Audio Renderers:
Speakers (High Definition Audio,0x00200000,1,0,quartz.dll,6.06.7601.17713
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.17713
Digital Audio (HDMI) (High Defi,0x00200000,1,0,quartz.dll,6.06.7601.17713
Digital Audio (S/PDIF) (High De,0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: Digital Audio (HDMI) (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: Digital Audio (S/PDIF) (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: Speakers (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713
EVR Power Information
Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality)
Quality Flags: 2576
Enabled:
Force throttling
Allow half deinterlace
Allow scaling
Decode Power Usage: 100
Balanced Flags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 50
PowerFlags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 0
Please advise
Thanks Jeromie
Fernando -
Ok, so after purchasing a new computer, with windows 7 pro, 64 bit, I tried downloading the newest iTunes, which at the time was 10.2.1 (i believe). After installation, everything seemed to work, except that iTunes was unable to securely connect to the internet, use home sharing, or validate my computer.
As troubleshooting, I first ran msconfig, and then turned OFF all programs that boot at start up EXCEPT itunes and quicktime. After a restart, i opened itunes again, and got the same result. That led me to believe that iTunes was NOT being blocked by another program on my machine. I am currently running itunes 10.7 successfully on a Windows 7 32 machine at work. Anyhow, for grins, I tried to install version 9 on the new computer, and it installed perfectly, and immediately connected to the itunes store, leading me to believe that there is nothing wrong with my software configuration (not sure if this is a safe assumption or not). I then tried to let iTunes update itself using the automated update function. It tried to update itself to the most current version, then 10.6. Again, iTunes was unable to connect to the iTunes store. I HAVE tried disabling the anti-virus software (AVG), but that made no difference.
I have since gone back and reinstalled iTunes 9. Here's the catch though. When I reinstalled using version 9, I had to redo all my library files. I'm about 1/2 way through my CD's, and now have a substantial library file going. The last time I let iTunes update itself to 10.6, once I realized that it was not going to connect to the store, I uninstalled iTunes, and reinstalled ver. 9. However, when I did this, it told me it could no longer open the library file, because it was a newer .itl or .xml (i believe it was one of those two extensions) library file. At that point, I basically started everything over again, using version 9, and have been importing CD's like a madman at night.
Here are my questions:
1) Is there a way to make a copy of the files that store my library info, so that if my upgrade to ver 10 IS NOT SUCCESSFUL, I can restore ver 9, but still have all of the album art work, playlists (when I import music, I create a playlist with the artists' name, and store things that way), etc. in tact?
2) What else can I try (firewall settings, internet options, etc.) to try and get version to to successfully install? I would really like to get all the benfits of the newer versions.
3) When I tried to get apple tech support before, they wanted me to pay a ridiculous 69$ fee for phone support. I just bought an iphone 5....this should entitle me to a fresh 90 days of phone support, right? The reason I ask here is that I could hardly understand the "tech" that answered the phone when I called for tech support last time, and to be honest, it really ****** me off that they wanted to try and milk me for another 69 bucks....I've purchased every iPhone since the 3Gs came out (pre-ordered at that), and have nearly gone broke purchasing music from their iTunes store....heck, maybe they're doing me me a favor not letting me into the store, huh?
Any help or ideas would be greatly appreciated,
-BrianMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Photoshop 7 (& other old Adobe programs) installation in Windows 7 Pro 64 bit
Recently I purchased a new computer running Windows 7 Pro (64 bit) with 2 TB hard drive and 16 GB memory and faced the task of trying to install Photoshop 7, Illustrator 8, Acrobat 8 Pro, and Dreamweaver CS3 that I had used very satisfactorily on my old Windows XP SP 3, 2GB memory computer with less than 1 TB hard drive. I now have all of these running successfully on my new computer and thought I would share here my experience gleaned from a number of other forums after many hours. I had the most problem with Photoshop 7 which I will describe last. In all cases I had the original genuine installation disks. These are generally needed except for Illustrator 8.
Dreamweaver CS3 -- This installed easily in the Program Files (x86) folder & does not seem to require running in XP compatibility mode
Acrobat 8 Pro -- Same as Dreamweaver CS3
Illustrator 8 -- The installation disk would not work for Windows 7 Pro 64 bit. A solution I found in a Microsoft forum is simply to copy the Illustrator folder and contents into the ProgramData folder on the new computer along with the following dll files in the C\Windows folder of the old computer: icccodes.dll, kpcp32.dll, kpsys32.dll, pcdlib32.dll, pfpick.dll, sprof32.dll These go right into the Illustrator folder. This program needs to be run using XP compatibility mode (after copying preceding files go to Control Panel --> Programs --> Programs and Features --> Run programs made for previous versions of Windows -- follow directions there). It might be possible to copy into the Program Files (x86) folder too, but the ProgramData folder works. I have not actually used Illustrator after doing this, but since it started ok, I presume that there will be no problems.
Photoshop 7 -- My Photoshop 7 was an upgrade from Photoshop 5. The PS 5 installation disk would not run on Windows 7 & when I tried the PS 7 upgrade disk (autorun) I got the message that it could not find a previous version of PS & then shut down the installation. I tried the method used for Illustrator 8 above (suggested on yet another forum with an additional dll identified in another Windows folder), but I got the message "Could not complete your request because of missing or invalid personalization information". This evidently had to do with missing authentication serial code number in the registry. I found some discussion of this in forums but no workable fix in my case which involved an upgrade. Then I discovered inormation in another forum which explained that installation with the disks could be done by inserting the upgrade disk and running it from the setup.exe file instead of autorun. When you do this you are presented with the option of proving your previous version of PS by simply inserting the earlier version PS disk at this pint of the process. After doing this the installation with the upgrade disk proceeds fine. The PS 7 program can be installed in the Adobe folder within the Program Files (x86) folder. However, after doing this and trying to start PS 7 you get the following error (if your hard drive is 1 TB or greater in capacity): "Could not inititialize Photoshop because the scratch disk are full" After much reading I learned that this occurs because PS 7 apparently cannot recognize partitions (volumes) 1 TB or greater. What you need to do is set up an additional partition (volume) on your hard drive. This is easy to do. Go to Windows Help, search on "create partition", choose "Create and format a hard disk partition", and follow the directions. I decided to make a 50 GB partion I named "scratch". The system will assign a drive letter to it. To use the new partion to allow PS 7 to start you need to start PS 7 and immediately press the ALT and CTRL keys together. This will bring up a window where you tell PS 7 which drives to use for its scratch disk. You need to select the newly-created scratch disk(partition) in the first choice and leave the other choices as "None". After doing this you have one last issue. When you try to save any file in PS 7 you cannot save it directly anywhee on the C drive since that drive is 1 TB or greater. What I do is save it to the scratch drive and then later move it from there to where I want it on my C drive. I have seen it suggested to install the PS 7 program itself on the newly-created scratch drive, but I don't know if this would allow saving files to the C drive. When installed the way I have described it does not seem to require operating in the XP compatibility mode.
Hope this helps those of you who prefer working with the programs they are used to on Windows 7 Pro 64 bit.
RayHello Nikhil.
Can you see here?
MAIN MODULE INFORMATION:
SAP GUI for Windows
SAP Logon Pad for Windows
730 Final Release
7300.1.0.1074
1337608
SYSTEM INFORMATION:
Operating system: Windows 8 Pro 6.2 (9200)
You are using patch 0 for Windows 8
Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
Patch 7 or higher,.
Apart from that the error is not from the GUI side,
See below:
Previous frontend interpretation time : 109 ms
Previous server response time : 5078 ms (for 1 roundtrips)
The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
Please use a supported version for the OS you intend to use.
You can find this information in note
http://service.sap.com/sap/support/notes/66971
Jude -
Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard. -
I need to know which update(s) I can apply to help stabalize the system.
Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here. -
Help! Installation of Windows 7 Pro 64-bit fails...
I am trying to install Windows 7 Pro 64-bit on my new video system:
- I boot the PC with the install CD inserted
- I get
. the installation screen
. accept licence agreement
. select on which disk I want to install windows
. the copy to disk finishes
. the next step is to reboot my system so that windows continues the install from disk.
. however after the reboot, just after the systems POST, I just get a black screen and nothing happens.
I already removed all other disks and removed the raid card :
So only the...
- motherboard Asus P6T SE
- CPU : Intel quad core 950 3.2Mhz
- Corsair 12 GB
- single WD 160GB disk ( for windows )
- LG DVD player
- Corsair PSU
- ps2 keyboard
- ps2 mouse
... remains attached
What is also strange is that there is no F6 during the install of Windows XP. Previously you could press F6 for additional drivers.
Now you can not. I tried to press F6 a couple of times but no additional options came on the screen.
I also allready preformated the disk : single partition and NTFS preformated with default 4kb cluster size.
Anybody an idea?Thanks... above helped... when searching on that forum I found someting about changing SATA from IDE to AHCI.
So in the bios I changed ...
> Storage Configuration > Change Configure SATA as IDE
... to ...
> Storage Configuration > Change Configure SATA as RAID
... and now it seems to work.
I used RAID instead of simple AHCI because I want to use raid0 (striping) for my paging disks.
So I will have a single disk for W7 Pro and use 2 disks for paging and cache.
My other 6 disks will later be used in raid3 on an areca controller.
Still working on my installation so I will leave this post open until windows 7 pro is installed / updated / configured. -
Windows 7 Pro 64-bit to be used as a terminal server
Hello,
I'm looking at using a Windows 7 Pro 64-bit PC as a Terminal Server using an application such, as ThinStuff XP/VS (www.thinstuff.com), to manage the RDP connections. Based on everything I've read, it looks like there's no Terminal Server CALs available
for purchase through MicroSoft, so is there a need to worry about licensing? Each PC that connects will have it's own Windows 7 Pro valid license and, of course, the PC to be used is also valid. Are there any licensing concerns I should have?
Thank you for your help!Hi,
To set up a terminal server, I suggest to set up a windows server system, Since Windows 7 is a client operating system and I do not suggest to use a third part software to modify its roles, especially the role or function related to the license. As for your
license concern, you can refer to the license agreement below Select your product name, version and language:
http://www.microsoft.com/en-us/legal/intellectualproperty/UseTerms/default.aspx
Regards
Wade Liu
TechNet Community Support -
Hi,
I bought a new computer with Windows 8 Pro (64 Bit) in February/March 2013 and it has crashed almost every day I've had it (it crashes at least every two days). Despite constantly sending the details of the crash through to Microsoft it doesn't seems
to have been addressed. The error message that pops up every time is the same. It is on a blue screen and says:
"Your computer has encountered an error and needs to restart :(
DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys)"
Can someone please explain what I need to do to fix this? I am not a tech head so some step by step instructions would be great. Can i (re)install new drivers etc or is this a common fault of Windows 8? This is driving me crazy. It
certainly doesn't make me feel like I have a new computer that's for sure!
I just read one post that suggested someone's fault ma be because of antivirus software AVG Internet Security 2013 (which I have). How can I find out iof this is the case? And if this software doesn't work with Windows 8 does anyone know
what is the best to use with Windows 8?
Any help would be massively appreciated.
Cheers,
rdtro1* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88001b83e58, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800197d7168
GetUlongFromAddress: unable to read from fffff800197d71f8
0000000000000000 Nonpaged pool
CURRENT_IRQL: 2
FAULTING_IP:
tcpip!FlpReturnNetBufferListChain+e2738
fffff880`01b83e58 488b01 mov rax,qword ptr [rcx]
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
PROCESS_NAME: System
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
TRAP_FRAME: fffff88002b38880 -- (.trap 0xfffff88002b38880)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa8004f6fc40 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffa8004f6fc41 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88001b83e58 rsp=fffff88002b38a10 rbp=0000000000000000
r8=fffffa8004f6fc40 r9=0000000000000000 r10=fffff88001400e80
r11=fffffa80061113d0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
tcpip!FlpReturnNetBufferListChain+0xe2738:
fffff880`01b83e58 488b01 mov rax,qword ptr [rcx] ds:00000000`00000000=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800194d8769 to fffff800194d9440
STACK_TEXT:
00 nt!KeBugCheckEx
01 nt!KiBugCheckDispatch
02 nt!KiPageFault
03 tcpip!FlpReturnNetBufferListChain
04 NETIO!NetioDereferenceNetBufferList
05 fwpkclnt!FwppDereferenceNetioNetBufferList
06 fwpkclnt!FwpsDereferenceNetBufferList0
07 tunnel!TunnelUserRestoreAndFreeNblAndNbState
08 tunnel!TunnelUserReturnNetBufferLists
09 ndis!ndisInvokeNextReceiveCompleteHandler
0a ndis!NdisReturnNetBufferLists
0b tcpip!FlpReturnNetBufferListChain
0c NETIO!NetioDereferenceNetBufferListChain
0d tcpip!TcpFlushDelay
0e tcpip!TcpPreValidatedReceive
0f tcpip!IppDeliverListToProtocol
10 tcpip!IppProcessDeliverList
11 tcpip!IppReceiveHeaderBatch
12 tcpip!IpFlcReceivePackets
13 tcpip!FlpReceiveNonPreValidatedNetBufferListChain
14 tcpip!FlReceiveNetBufferListChainCalloutRoutine
15 nt!KeExpandKernelStackAndCalloutInternal
16 nt!KeExpandKernelStackAndCalloutEx
17 tcpip!FlReceiveNetBufferListChain
18 ndis!ndisMIndicateNetBufferListsToOpen
19 ndis!ndisInvokeNextReceiveHandler
1a ndis!NdisMIndicateReceiveNetBufferLists
1b tunnel!TeredoWfpIndicationWorker
1c tunnel!LwWorker
1d nt!IopProcessWorkItem
1e nt!ExpWorkerThread
1f nt!PspSystemThreadStartup
20 nt!KiStartSystemThread
Image path: \SystemRoot\system32\DRIVERS\tunnel.sys
Image name: tunnel.sys
Browse all global symbols functions data
Timestamp: Thu Jul 26 04:23:04 2012 (5010AA08)
CheckSum: 000296F2
ImageSize: 0002C000
File version: 6.2.9200.16384
Product version: 6.2.9200.16384
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 3.6 Driver
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft® Windows® Operating System
InternalName: tunnel.sys
OriginalFilename: tunnel.sys
ProductVersion: 6.2.9200.16384
FileVersion: 6.2.9200.16384 (win8_rtm.120725-1247)
FileDescription: Microsoft Tunnel Interface Driver
LegalCopyright: © Microsoft Corporation. All rights reserved.
Disable the Teredo Tunneling Pseudo-interface 6to4 Adapter
How to Disable Teredo Tunneling Pseudo-interface 6to4 Adapter
http://blogs.msdn.com/b/richin/archive/2010/11/26/how-to-disable-teredo-tunneling-pseudo-interface-6to4-adapter.aspx
Does this fix it?
"A programmer is just a tool which converts caffeine into code" -
Bootcamp and WIndows 7 Pro 64 bit
Hello,
I've restored my system and got Boot Camp to make a partition the size of 150 GB. I try to install Windows 7 Pro 64 bit and I get the message that the BOOTCAMP partition cannot be installed because it's not an NTFS file system. Is there a way to format the BootCamp partition to use the NTFS file system instead of FAT32?Look on pages 8 and 9 of this install guide (http://manuals.info.apple.com/enUS/Boot_Camp_Install-Setup10.6.pdf) . Disregard the blue screen you see on the top of page 9; that is for Windows XP
-
Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit
Hi,
I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyboard and mouse are not detected.
i'm using boot camp ver. 5.0.
does anyone have similar problem with me?I have finally successfully installed Windows 7 x64 on MacBook Air 13.3" (2013) thru Bootcamp.
Problem: After Windows 7 install thru BootCamp, I got to the first login screen and not input devices (Mouse, keyboard, USB) worked. I tried to boot into Windows Safemode, but I received the error "Windows can not complete installation in Safe Mode".
Cause: WIndows 7 does not have native USB 3.0 drivers, included on the install images.
Resolution: I downloaded the latest device drivers with thru BootCamp and copied them to the USB Flash Drive that had my bootable Windows 7 x64 install on it. The second option in BootCamp is "Download Support Media". This does more than just download drivers. It creates a file called "autoattended.xml". This is key as it tells Windows during the install process to use the device drivers that you download. Otherwise, you need to do it manually, which you can't because you have no mouse or keyboard.
NOTE: I had no need of a super drive because I had all the files on one USB flash drive. Therefore, I don't think it matter which side of the MBA the USB drive was plugged in, as other solutions suggested. -
Premiere Pro CS3: Many Problems Fixed By Upgrading to Windows 7 Pro 64-bit
I recently installed an SSD drive and Windows 7 Pro 64-bit.
Installing the Adobe Master Collection CS3 went smoothly and only took a few minutes instead of an hour, as in the past.
Premiere, for the first time in the years I've used it, runs STABLE. Not only that, but I can have AfterEffects open at the same time. And Maya 2008. And everything chugs along smoothly.
Case in point tonight: Multicam Editor: Under XP, it worked, but the quality of the video displays would be badly pixellated when video was playing. Under Windows 7, all the four viewports plus the 'online' viewport are sharp and clear and I can see if a camera is slightly out of focus, which was impossible to detect in the past until I watched the finished result.
The audio dropouts everyone complained about for years are a thing of the past.
And here's the biggie: I can render, render, render and keep rendering h.264 files and Premiere keeps ticking. Under XP, 2 to 3 files and that's it. Unknown Error would be the next render result. Under W7-64, I rendered all night and day without shutting or restarting Premiere, and I even had Maya and AE going and was working in them at the same time, something I could never do in XP because it would run out of RAM. And I can do this in 4GB ram! With 8GB, AE renders 3.5X faster, but most other programs remain about the same. I figure in the case of AE, it has EXCLUSIVE use of 4GB ram all to itself on an 8GB system. At any rate, die-hard CS3 users, don't be afraid to upgrade to Windows 7 64-bit.
The only thing you need to do differently is put the Postscript fonts in Adobe's fonts folder, as it won't see the Windows\Fonts-located PS fonts.
My 2008-vintage editing workstation breaths new life, like a major hardware upgrade was done. The "$139 system performance upgrade" I call it. (Sure, adding the Intel 320 SSD helps, but mainly with launching programs--once they're running, the main improvement comes from Windows 7 64-bit.)Actually, Win8 is really not a tablet OS... it is "essentially" Win7 with a different front end http://forums.adobe.com/thread/1101032
Anything other than a new Win8 "app" runs on the same kind of desktop you see with Win7 -
V570 problem with Intel onboard driver on Windows 7 Pro 64 bit
Hello Everyone,
I recently installed Windows 7 Pro 64 bit on my Lenovo v570. I downloaded the drivers from the support page and I have a strange problem with the onboard graphics driver "Intel Onboard Graphics Driver for Microsoft Windows 7 (64-bit) - Lenovo B470, B570, V370, V470, V570" in the drivers section.
Installation seems fine, but after restart, the system fails to boot and goes into boot recovery mode, where I get a message saying that booting failed due to a bad driver and the only actual option I have to boot up is to go back to a previous restore point. I tried installing the Nvidia driver for Windows 7, but it says that I need to install an Intel driver first, which is the one that gives me the blue screen when booting. I have also tried installing both drivers without a restart between both installations, but that didn't help.
I am wondering if anyone in the community has seen something similar. Any advice, information or assistance will be highly appreciated. Thank you very much in advance for your time.
Best regards,
Moe.
Solved!
Go to Solution.Welcome to the Lenovo Community !
Check out the link I have posted below for video driver installation problems on your model. The suggestions offered have worked for others.
http://forums.lenovo.com/t5/Lenovo-C-E-K-M-N-and-V-Series/V570-video-drivers-don-t-work-with-Windows...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.
Maybe you are looking for
-
Restricting Payment Method For Customers
Dear gurus!!! My client has the following requirement in which he desires that 1- Can we receive incoming payments from customers with different payment methods. In our assignment field we give the cheque number or deposit slip etc... which is freely
-
[SOLVED]Gnome+udisks/devicekit+CD/DVD Drive Problem
Hello everyone, long time lurker, first time poster here! I've been having a problem with my CD/DVD drives for some time now. When I issue the eject command via shell or if I press the eject button the trey will only open for an instant and then clos
-
Hi All I want to restrict Choice List values depending on data coming from previous page. I am using following code : OAMessageChoiceBean contactList = (OAMessageChoiceBean)webBean.findChildRecursive("<Chioce List Name>"); contactList.setPickListCach
-
Safari says I'm not connected to internet
This sometimes happens, I can access my e-mail and I am connected, but I still get this message. Does anyone know why this would happen?
-
Help please with my new ipad 4 Retna.
Please help find a solution to my problem with my new ipad 4 Retna. The keyboard seems to have a mind of its own and keeps jumping up and down on the screen without any assistance from me. I did have the screen replaced and I am not sure whether that