No sound in any software.

Good evening.
Half a month ago I discovered to my dismay that the laptop no longer was producing any sound. I've troubleshooted this entire week, and I think I'm ready to ask around on the forum. I've tried pretty much everything to my knowledge only to get disappointed afterwards.
I've reinstalled alsa, I've compiled the packages myself, I've checked logfiles (no errors), and the mixer reports that the card is active, working, and playing at the highest volume possible.
The computer in question is a laptop, and I've tested the speakers in win7, and they work like a charm.
lsmod:
Module Size Used by
nls_cp437 4525 1
vfat 8176 1
fat 42960 1 vfat
aes_i586 6892 1
aes_generic 25846 1 aes_i586
ipv6 239277 27
coretemp 4665 0
fuse 54698 9
nvidia 10070693 50
snd_seq_oss 26128 0
snd_seq_midi_event 4496 1 snd_seq_oss
snd_seq 42680 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 4653 2 snd_seq_oss,snd_seq
snd_pcm_oss 33758 0
snd_mixer_oss 14910 1 snd_pcm_oss
snd_hda_codec_nvhdmi 13547 1
snd_hda_codec_realtek 198775 1
arc4 1070 2
ecb 1589 2
snd_hda_intel 19436 7
snd_hda_codec 70155 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel
joydev 7503 0
snd_hwdep 4924 1 snd_hda_codec
uvcvideo 53488 0
mmc_block 7634 2
cpufreq_powersave 658 0
snd_pcm 58880 5 snd_pcm_oss,snd_hda_intel,snd_hda_codec
iwlagn 244259 0
cpufreq_ondemand 6971 0
videodev 39124 1 uvcvideo
snd_timer 15583 4 snd_seq,snd_pcm
video 15889 0
acpi_cpufreq 5157 1
freq_table 1999 2 cpufreq_ondemand,acpi_cpufreq
iwlcore 104224 1 iwlagn
mperf 979 1 acpi_cpufreq
iTCO_wdt 8677 0
tg3 115656 0
sdhci_pci 5774 0
sdhci 14341 1 sdhci_pci
rtc_cmos 7746 0
intel_agp 24087 0
snd 45172 22 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
mmc_core 47268 2 mmc_block,sdhci
psmouse 51529 0
output 1448 1 video
wmi 5962 0
i2c_i801 7426 0
libphy 14543 1 tg3
rtc_core 11831 1 rtc_cmos
agpgart 23520 2 nvidia,intel_agp
jmb38x_ms 6830 0
iTCO_vendor_support 1433 1 iTCO_wdt
led_class 1843 1 sdhci
v4l1_compat 13562 2 uvcvideo,videodev
soundcore 5025 1 snd
i2c_core 15599 3 nvidia,videodev,i2c_i801
rtc_lib 1494 1 rtc_core
memstick 5278 1 jmb38x_ms
battery 7879 0
button 3746 0
thermal 9786 0
ac 2329 0
pcspkr 1359 0
serio_raw 3566 0
sg 20932 0
processor 25126 3 acpi_cpufreq
evdev 6820 15
snd_page_alloc 5981 2 snd_hda_intel,snd_pcm
mac80211 167958 2 iwlagn,iwlcore
cfg80211 124335 3 iwlagn,iwlcore,mac80211
rfkill 12854 1 cfg80211
ext3 110740 1
jbd 39247 1 ext3
mbcache 4290 1 ext3
uhci_hcd 19251 0
ehci_hcd 32860 0
usbcore 121705 4 uvcvideo,uhci_hcd,ehci_hcd
sr_mod 13313 0
cdrom 31410 1 sr_mod
sd_mod 26768 6
ahci 17813 0
libahci 16174 6 ahci
libata 140707 2 ahci,libahci
scsi_mod 105888 4 sg,sr_mod,sd_mod,libata
Lspci:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1)
06:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
06:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
06:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
06:00.4 System peripheral: JMicron Technology Corp. xD Host Controller
07:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
cat /proc/asound/card0/codec#* | grep Codec
Codec: Realtek ALC888
Codec: LSI ID 1040
Codec: Nvidia MCP77/78 HDMI
I'm out of ideas. I can't recall changing anything either, the day the sound died..

codycarey wrote:
If you have 'aplay' installed I suggest using 'aplay -l' to list all of the available devices. Take the card and device numbers you want to use and plug them into 'aplay' with
So on and so forth to check that your hardware is working. If it is then you can take that device and set it as your default in your .asoundrc.
No sound from either of my three channels. Didn't bother to check the HDMI-connector as I rarely use it..
[mads@blackBox ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
[mads@blackBox ~]$ aplay -D hw:0,0 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
aplay: set_params:1059: Channels count non available
[mads@blackBox ~]$ aplay -D hw:0,1 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
aplay: set_params:1059: Channels count non available
Channels count non available?

Similar Messages

  • When i receive notification on any software there is no sound at all

    please help me when i get any messages on facebook or whatsup or any software i dont get any sound that i recieved any messges or notification

    Have you checked... Settings... Sound... or Restrictions... Notifications...
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Windows hangs boot after upgrading any software

    Hi,
    My Windows 8 Pro x64 Dell XPS8500 machine developed a really weird problem.  (The problem actually began a while back - first noticed maybe 4-6 month ago - but only now trying to fix it.)  It re/boots fine so long as I don't try to install anything. 
    However, installing any software upgrades causes Windows to hang on boot.  The software upgrades that I tried are Evernote, iTunes, Java VM, and all of them are triggering the same behavior.  All this aforementioned software seeming doesn't have
    anything in common.  The only known upgrades that do not appear to trigger the issue are Firefox and Chrome (where upgrades happen more or less in passive fashion)  There is no clear event that I can recall in the past that I can attribute this happening
    to (i.e. I can't pin point to something like installing a driving and it failing immediately afterwards) - just one day a message popped up to upgrade iTunes, which I did, and then rebooted to experience the issue.
    Here are the steps to describe what happens with a bit more detail and troubleshooting steps tried:
    Manually launch upgrade of an existing software. (Tried Evernote, iTunes, Java VM)
    Successfully go through the install/upgrade.  Seems irrelevant if software asks for reboot or not.  Machine works fine until rebooted.
    Reboot the machine.  Machine shuts down without any issues.
    BIOS POST is successful, and Dell logo with jumping/circulating dots comes up.
    There is a normal flurry of hard-disk activity for a few seconds, which after a few seconds reduces to none or sometimes/occasionally to very brief flashing a few seconds apart.  This is where the problem is noticed.  It can stay like that for
    hours if not days (normal boot takes about 20-30 seconds).
    Typically, if there is no hard-disk activity at all, pressing the power button causes one brief flash, followed by one more about 1-3 seconds later, and no change.
    The only recourse is to force turn off by holding power button for few seconds.
    Letting it try to boot again leads to the same behavior.
    Repeating attempts to boot 3-4 times causes Automatic Recovery to kick in.
    The only way to get the machine to boot again is to use Recovery to restore to a previous state.  This sometimes requires to be done more than once and doesn't fix on the first try. 
    (Also, I enabled Win boot menu, and couple of times instead of waiting for Automatic Recovery to kick in, tried to use recovery through the menu - in that case it's more likely to require the procedure to be done more than once).
    I tried to do a logged boot to capture log file in one of the cases where it boots - it appears to never produce \Windows\ntbtlog.txt file (possible I didn't do something right for this one, though I thought that file is never deleted and only grows)
    Additional Info:  SysRestore currently displays only two available points:
    6/13/14 - Installed Evernote v. 5.4 - Type Install
    6/9/14 - Automatic Restore Point - Type System
    All other previous restore points (from having installed a few more updates and software in the 1.5 years I had the machine) are gone somewhere.
    Choosing to revert to the second restore point (when selecting restore point from boot menu) as opposed to the first one and later booting successfully, for some reason the same restore points are listed again (so it doesn't seem to be truly reverting)
    Nothing fruitful appears in the EventLog.  The only critical messages that i see there are both from SCM and one reads "The Dell Digital Delivery Service service terminated unexpectedly.  It has done this 1 time(s)." and the other "The
    system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly." (which is expected).  And there is a warn level entry about some Bluetooth device not being
    able to enter power save mode.  That's it for system event logs.
    At this point I'm totally stuck trying to figure this one out, or even trying to figure out how to obtain information on where it gets stuck.  This is worse than having a BSOD as with BSOD at least there is some info on what's happening.  Here
    I don't even see where it gets stuck or what's preventing from booting successfully.
    Please help!!!

    Here is the link to the SrtTrail.txt file: 
    http://1drv.ms/1sh7rCy
    Again, let me clarify the situation as well as provide some additional information that I discovered since original post.  Per original post - I can boot into the system up and  until installer gets activated either by trying to uninstall or upgrade
    existing software or install new one.  At the time, the only way I could get the system to boot again was to let it fail boot twice and on the third attempt let it perform system restore from a restore point, and then it would boot again (with all the
    installed/updated/uninstall changes wiped out)
    Since then I discovered the following additional behavior points:
    I managed to get it to accept couple of software upgrades by using roughly the following steps: let it fail boot twice.  On the third attempt instead of choosing system restore I instead cancel or choose advanced options (depending on what it offers). 
    Typically it goes either through some system analysis or disk check for errors - wait and it doesn't find anything.  When presented with a menu of other recovery options (like changing UEFI, command prompt, etc), I simply choose to exit and continue loading
    windows.  At this point it sometimes (I'd say 1 out of 3 times) manages to boot successfully, retaining all the changes (i.e. retaining software updates and the like).  If it doesn't succeed booting, repeat until it does.  Using these steps
    I managed to update most of software so far, including windows update.  But each time it's a struggle to get it to boot again.
    Simply rebooting the system without any changes succeeds most of the time.  However, today I noticed that a plain reboot (without any installer/uninstaller/update or any other system/soft/config changes) doesn't always succeed, requiring the same process
    as in previous bullet point to get it to boot again.
    I also noticed an additional behavior - my keyboard an mouse have some buttons that are illuminated (on dell keyboard those are media buttons, and on the dell mouse it is mouse sensitivity indicator). I noticed that when windows boot up, the keyboard and
    mouse lights go out simultaneously.  If they come back about a second or two later (with one flicker in between), then system boots up fine (the moment they come back, the system displays the logon screen with the seatle space needle).  However,
    if they don't come back, then the boot will hang there for ever.  Is it possible that some driver sometimes succeeds to be loaded correctly, and sometimes fails to load causing Windows to perpetually wait for that driver to finish loading (which it never
    does)?  If that sounds like a possibility, how can I find out what is it that windows is doing when it starts to perpetually wait for whatever it is waiting for?  Tell me what logs would help to understand that and how to capture those!
    Also note that I run Avira Antivir antivirus (ever since I got this PC), and it doesn't flag anything suspicious on the system.  I also ran MalwareBytes scan which found no suspects, as well as GMER rootkit scanner (which as far as i can tell, also
    did not find anything suspicious).
    There is another oddity that is going on with the system - may or may not be related, so mentioning just in case it is - which is that I'm using Dropbox, and it keeps creating "My Videos" folder on the Desktop, even though it is way outside of my dropbox
    root.  Deleting the folder doesn't help as the moment I right-click on the Desktop, it re-appears.  It, oddly enough, also appears in C:\Users\{profile} folder right along side real "My Videos" folder.  Looking properties of both in explore
    shows in the property pages that one is located in C:\Users\{profile} and another in C:\Users\{profile}\Desktop (and again, yet both of those explore shows in C:\Users\{profile}).  Like I said, not sure if these are related (I suspect not, but who knows),
    so mentioning just in case.
    Note that I'm trying to fix it without going through refresh or reset since the first one would cause the pain to reinstall of all the software on the system (without any indication that this would solve the issue), and the later option would just completely
    wipe out everything off of the system, which is even more painful, and again would not guarantee solution (e.g. if it is a bad driver that would get reinstalled anyway after wipe. Yes, I technically do have backups, but those are more for drastic case if my
    harddrive crashes, and wouldn't want to rely on those to voluntarily wipe the system due to odd behaviors - too painful and time-consuming.  I'm looking for a solution to problem rather than just-start-from-the-beginning-because-it-is-easier approach.
    Thanks, let me know how to get the troubleshooting info to get to root cause.

  • Sound Clip Organization Software?

    Hello,
    I recently acquired a Tascam portable recorder, and I am wondering if there is any software that I could use to organize and keyword my sound clips. Do you have any suggestions?
    Thanks in Advance,
    Spencer
    ><>

    I downloaded it and gave it a try, but it seems a little too in-depth for me. What I need is an application that allows me to add metadata tags to files, and organize them. Do you know of any light duty apps along that line?

  • No sound in any flash content

    Hi.
    I have this weird problem. I have no sound in any flash content. Websites with sound I cannot hear. Applications using flash player does'nt put out any sound.
    I have the volume turned up on my speakers and am able to listen to music from iTunes, also music and videos played with Quicktime sound comes out fine.
    It's the same problem whether I use Safari, Firefox, Camino or directly via the adobe flash 8 software.
    Could this be a virus or a bug in flash player? Is there some hidden setting I can adjust?
    I am using an intel 20" iMac.
    Hope someone can help.
    Thanks
    Vayu

    Thanks for your reply, but that is the version I have installed.
    I have version 9,0,28,0 installed.
    Can be tjecked here: http://www.macromedia.com/software/flash/about/

  • After the latest update my laptop stopped playing any sounds and any videos. How can I fix this?

    I have the HP envy 14-2166se and downloaded the newest update from HP today and I can no long play any sounds or any videos. If someone could help that would be great. 

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook. You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How to attach sound to any button?which will continue that sound.

    Hi,
    Am working on Flash cs5.Can anyone tell me how to attach sound to any button?which will play after click on button.this sound should play continue till 2-3 scenes ahead.Am working on project which has 3 button with diffrent sound.and the sound button contains some scene which has volume seter.I mean,if user want to hear that sound in slow,medium or high pitch.the code should set as per this.Its in as 2.
    This site is like "karaoke".just the sound is classical music.It will continue on software and user will sing a song.
    Can anyone help me?At working on this from last 2 months.and its hard for me to get perfect answer.

    Add your sound clip to the library and give it a Linkage ID of "mySoundClip"
    Assume your button is in frame 1.
    GIve your button the instance name of "mySoundBtn". And put this code on frame 1 (timeline).
    stop();
    mySoundBtn.onRelease = function () {
              mySoundC = new Sound(this);
              mySoundC.attachSound("mySoundClip");
              mySoundC.start(0, 10);  //10 represents the number of loops
              gotoAndPlay(2);
    than put this code on the timeline frame where you need the sounsd to stop.
    stopAllSounds();
    Also If you want to be able to play the sound from your local disk without attaching it to the swf, use .loadSound("the url", true);

  • Does creative cloud include any software for HD video screen capture?

    Does creative cloud include any software for HD video screen capture? I know that Captivate is not offered but are there other software applications available that do the same job? I am not wanting to make tutorials but I am a filmmaker wanting to integrate sequences with screen capture (which I will edit on Premiere)

    Thanks Brian,
    Spent some time yesterday doing research on this. There are good reviews and bad reviews for just about every screen capture application out there it seems.
    The top-ten reviews gave their gold medal to CamVerce, which I'll probably buy today.
    http://video-capture-software-review.toptenreviews.com/
    Yesterday I bought the Sonne Screen video which is rated 5th on the top-ten site. (I figured as I'm going to be editing on premiere I shoudn't need to pay for extra editing packages and as I'm not using it to create tutorials I really just want a good quality screen capture for Windows 8). However, I'm not really happy with the image quality on playback and I'm finding the technical assistance really poor from Sonne. I still haven't received an email confirmation from them.
    The others that I thought sounded right for me were WM Capture (though the top-ten review had a few negative things to say about it).
    Tried a couple of the free ones also. EZvid is very popular.
    Will see how I go and let you know. I'm sure this is very subjective and I'm probably not being as clear as I need to be about purpose of use.

  • My 5s is not updating any software nor installing new

    my 5s is not updating any software nor installing new

    Hello abbasamroha,
    After reviewing your post, it sounds like the iPhone is not updating. Is the OS not updating or apps? I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    If you can’t update wirelessly, or if you want to update with iTunes
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My computer will no longer emit sound of any kind, music, video, warning, or otherwise

    I'm not sure how it happened, I was trying to play something on itunes when everything froze up and the music stopped. But the problem is not limited to itunes, i can't hear any sound of any kind from my computer. I have checked and the speakers for my computer are labeled as working completely fine, and the computer says that everything appears to be in working order. Except still no sound, whether its music, a video, or even warning sounds or start up sounds the computer naturally makes.

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My Mac will not let me install any software I download. In some cases (Like quicktime) i get a message that says "Can't create the folder" I have it with adobe air and its creating all sorts of issues. My software is up to date and I have 10.8.2.

    A whole bunch of issues here.
    I can't install any software. It started when iPlayer stopped working at all.  This led me to try to update software versions such as Adobe Air to 3.5 (Failed) then quicktime player 7.6.6 as recommended (Failed) then the printer packed up and I have tried to install the downloaded software drivers for Canon from the Apple site (Failed again) 
    In all cases they let me download so I have the file, but not install.
    Quicktime tells me it can't install a file "/var/folders/15....then a long string of numbers....ending in T//install.1347YKihUc".
    The Canon Print Driver has a very similar message.
    Adobe Air says "An error occurred whilst installing....contact my administrator" which is me and I am fine with it ;-)
    Remember this all started because my iPlayer (and my printer) just stopped working and I have been trying to fix those.
    I am a bit techy but not much.
    Can anyone assist?
    Many Thanks.
    Fozzie65

    I have Firefox 3.6.6, and now that Firefox 4.0 is available, it crashes constantly. Sometimes less than 5 minutes after I open it. I have a Mac 10.4.11, so Firefox 4.0 isn't an option for me. When I asked Ff to check my plug-ins it said there was an error and to check back later. Twice.
    Because I didn't have any (any) problems with my Ff before the upgrade became available, I am forced to question if Ff has done something to make the earlier version crash so you'll upgrade, but I can't afford to upgrade my Mac right now.
    In the meantime, I do need a browser that works! I dislike Safari, Chrome is also not available on Mac 10.4.11, and Explorer is just plain not available on Mac.
    Do you have any suggestions on how to fix my Firefox 3.6.6?
    Ty

  • Mac Pro 2.66 ghz Quad Xeon Freezing when I use any software

    Can Anyone Help me, I have a serious freezing issue with My Mac Pro, Everytime I use any software it just Freezes on my ie IDVD, I tried Instaling a new OS System, and repalaced a new Hardrive but with no joy, I'm Guessing its the graphic card now but I dont want to waste anymore money until I'm sure.
    ATI Radeon X1900 XT 512 SDRAM used to give me dual screen display until the right side failed so now I'm only using one screen, also everytime I'm displaying a video their are thin random lines and a bit of screen display distortions before it eventually freezes on me.
    Please Help

    Mac Pro 1,1 (all Mac Pro models come with Xeon).
    What matters is cleaning the X1900 of dust and from clogging intake and exhaust - every three months.
    Run Apple Hardware Test from your OEM DVD.
    Install SmcFanControl 2.x and keep the fans rpm to 800-900 instead of 499-599 base as minimum at least.
    Monitor temperatures with Hardware Monitor or similar.
    Have you been looking to see in System Profile: Memory if there are any errors?
    Normally, clone backup update weekly and running Disk Warrior at the same time should be done to spot disk directory and file system problems before they get worse. Or any time your system freezes.
    Freeze... and what you have 90% of the time is a corrupt directory and other errors.
    At which time you may need to restore if you can't fix the problem. And don't rely on only Apple DU First Aid to find and repairs any and all errors.
    For Snow Leopard maybe a flashed ATI 4870 to replace the X1900.
    You may need to start over from scratch to get things stable once you find what is happening, and work with a test system until then with some trial and error. Format/initialize and clean install of 10.6.x for the OEM 10.4.7+.
    At nearly 4 yrs now since it came out, not sure if you have plans for a new one.

  • When I try to open any software by adobe, it does´t work and appears a box that says this:

    When I try to open any software by adobe, it does´t work and appears a box that says this (in czech):
    Product uninstall and reinstall.  If this problem persists, contact Adobe Technical Support and provide the error code displayed at the bottom of this screen. ERROR 1
    How can I fix it?
    I work with adobe software everyday and have to finish a job.
    I deleted some files in my cache and maybe that´s why it stopped working.
    H E L P!
    I have adobe CS6 on a MacPro 2.5 GHz Intel i5 8gb memory 1600 MHz DDR3

    Adobe retired this Feb 17, 2014.
    This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
    These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account.  The user forum for CreatePDF has a DOC that speaks to the app removal.
    Be well...

  • HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

    How do i update 10.5.8 if my macbook does not show any software updates?

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • My iPhone 4s no longer has sound for any of the applications but it does have sound for phone functions.  Where is the setting for app sound?  I have gone to the multitask screen and the volume bar is empty.

    I recently found my phone outside in light rain (it had been there about 20 minutes).  It had some glitches at first, however after letting it rest overnight it seemed to mostly recover.  The one problem I am having is that I no longer have sound for any of my applications.  I do have sound for phone fuctions, and I am able to use the speaker for phone functions. 
    When I am in my applications, including music/videos, the only way I can hear is if I use my earbuds.  I am able to make a video and it will record sound just fine.
    When I go to the multitask screen, the volume bar is empty and I cannot adjust it using the side buttons (even though in settings I have that feature activated). I completely reset all of my settings tonight and that did not make a difference. 
    Is there a setting I am missing, or am I just SOL?  I am trying to avoid having to get a whole new phone but it is very frustrating to not have sound with my applications.

    Hi Baileyfour,
    Welcome to the Support Communities!
    The articles below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    There are two places where vibrations can be set.
    One is the Settings > Sounds
    The other area is Settings > Notifications
    If you have an app set to Alert, it may have a vibration set for it.
    iOS: Understanding Notifications
    http://support.apple.com/kb/ht3576
    Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    I hope this information helps ....
    Have a great day!
    - Judy

Maybe you are looking for