No sound in browser; sys: linux

Running Linux; using Foxfire 3.xx; NO sound through browser;
yes I have system sounds.

Similar Messages

Konqueror browser for Linux has an useful CPU limitation feature for websites using Flash content. Can you add such a feature in Firefox?

I have recently found that Konqueror browser for Linux can help user to limit cpu usage while visiting a website using flash technology by changing settings in the Flash section and adjusting the slider from VERY HIGH settings to HIGH and MEDIUM and so on. It actually works, and it does not have a direct impact on the general performance for flash player but it may generate some conflicts if other extensions such as add-blocker or click-to-flash are enabled also.
Maybe you can add a similar setting in Firefox in the browser option section or just as an useful addon or extension.

Sorry for being late with my reply. I've just tested that addon that you mentioned in your post ( https://addons.mozilla.org/en-US/fire.../system-monitor/ ) , it looks like a system monitor and nothing more than that.
As for the memory tip ( about:memory ) I agree that it can be extremely useful for users that have less than 1 gb memory installed on their system. I know very little about computers but I can tell your tip for optimizing memory usage in firefox has merits.
Me, I have another problem with cpu overload in Firefox, Internet Explorer, Opera and most of the browsers with flash support enabled. Each and every time time I visit a page that features all sort of adds and gadgets based on flash technology, and each time I try to watch a video online my cpu goes all the way up to 100% and stays there until i finally decide to close the browser.
I am running winxp and also linux on a Dell Optiplex GX260 machine with 2000 MHz cpu, 1024 Mib ram and 128 Mib video card, it is not the best computer in the world but still 2000 MHz should be enough for a limited and uneventful web experience.
It is not as much an issue with the web browser, any browser, the whole problem is caused by funny people claiming to be deeply involved with web development, and promoting flash technology for ages instead of choosing other alternatives, more user friendly. All I am saying is that flash ruined the entire web experience making people to believe that they actually need dual-core cpu and coreduo and deepfreeze cpu and so on which is only partially true.
I always get better results for cpu usage when watching online videos that use media player as default player and not flash player, and my cpu stays below 70% usage which is not much but still it is not 100% usage.
Konqueror offered me a nice surprise, and I was able to limit cpu usage once I moved that slider from Very High setttings for flash player to Medium settings. I got something between 80-90% cpu usage as a result, and I was very pleased to finally see a working solution to my problem at least for linux if not for windows.
The only other browser that I can use for windows only, which handles both flash player and cpu usage well is Kmeleon browser which is a long forgotten project but does offer nice features once you find some plugins that it needs to make it come to life again.

Some ADF pages are broken on old firefox browser in Linux OS

Hi all,
Recently few of the ADF pages in my area are reported to be broken in old firefox browser running on RHEL 5 64 bit OS.
Firefox version: 3.6.26 (Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.26) Gecko/20120131 Oracle/3.6-1.0.1.el5_7 Firefox/3.6.26)
Triaging the issue I found that for all broken pages the page is refreshed again after complete load and URL for second load has a malformed escaped string appended which I suspect might be causing this issue.
URL for first load:
http://adc4120388.us.oracle.com:15227/em/faces/ai/ess/listSchedules?target=%2FFarm_WLS_SOA%2FWLS_SOA%2Fess_server1%2FESSAPP&type=scheduler_service&appContext=enabledApp&Adf-Rich-Message=true&unique=1362573084657&oracle.adf.view.rich.STREAM=emT:searchResults:schedulesTable&Adf-Page-Id=6&javax.faces.ViewState=!8wifg1j3&Adf-Window-Id=w1
URL for second load:
http://adc4120388.us.oracle.com:15227/em/faces/ai/ess/listSchedules?target=%2FFarm_WLS_SOA%2FWLS_SOA%2Fess_server1%2FESSAPP&type=scheduler_service&appContext=enabledApp&Adf-Rich-Message=true&unique=1362573084657&oracle.adf.view.rich.STREAM=emT:searchResults:schedulesTable&Adf-Page-Id=6&javax.faces.ViewState=!8wifg1j3&Adf-Window-Id=w1#!6%40%2Fai%2Fess%2FlistSchedules%40%3Ftarget%3D%252FFarm_WLS_SOA%252FWLS_SOA%252Fess_server1%252FESSAPP%26type%3Dscheduler_service%26appContext%3DenabledApp
Additional malformed string in second reload URL:
#!6%40%2Fai%2Fess%2FlistSchedules%40%3Ftarget%3D%252FFarm_WLS_SOA%252FWLS_SOA%252Fess_server1%252FESSAPP%26type%3Dscheduler_service%26appContext%3DenabledApp
Note that this happens only in the above mentioned firefox browser in Linux OS, this second reload was not happening in my windows latest firefox browser (v 15.0.1), and hence these pages were coming up fine.
Is this kind of behavior a known issue? Or any hints on what could be causing this second reload?
Thanks,
Rahul

Hi,
you would need to file a service request with support and provide a test case for this problem to be analyzed by development. For this you need a support contract. Depending on the JDeveloper version you use, it may be that this old browser hasn't been tested. Also note that with 12c we probably start de-supporting old browsers like this.
Frank

Shuttle quickly in Sound & Music Browser?

Hi,
When I'm in FCP X and open the Sound & Music Browser (my iTunes Library) - I see al my songs. Good!
If I want to listen to one, but fast forward it, of shuttle around within the song quickly - is there a way to do this?
I can only click and play on a song to hear it, or select it. But if I want to hear different parts of it quickly, I don't seem to be able to shuttle around - unless I specifically go and open iTunes - which then kinda defeats the purpose of accessing it quickly while in FCP X!
Hopefully one of you experts can do this?
Thanks,
Larry

Going to try and explain my situation a bit better.
Say I'm playing a game, or there is a sound playing that resembles a heart beat. The heart beats, then there is no sound, then beats again. Well my music from iTunes, is quieter when the heart beats, and goes back to normal volume when there is no sound playing from my browser.

[SOLVED] No sound in browser

Hi everyone!
I recently moved from Ubuntu to Arch (Yeah!). Everything was fine, the installation was quite easy and I found everything I needed with on the official repos and AUR.
I only have one major problem: There is absolutely no sound in my browser (I tried both Firefox and Chromium). The problem is not only with flash, html5 audio does not work either.
The sound works in vlc, xmms2 and everything else, except for the browsers. I tried to figure out the problem for hours, looking in many forums and installing different packages.
I don't know where to go now. I don't really understand how do sound works in Linux and I don't know which information I should give here and where to find it.
Does anyone have an idea ? Which information should I dump here to help ?
Thanks !
Last edited by lracicot (2013-05-04 05:50:15)

Ok I solve my problem.
I have two sound card: "Generic" (HDMI) and "Generic_1" (Analog). The "alsa: default" device was set to "Generic".
I only changed the "alsa: default" device to use "Generic_1".
This post really helped my: https://bbs.archlinux.org/viewtopic.php?id=121049

W540 - Sound and Display in Linux

Hey dear supporter/user/reader!
After calming down due to the vast loss in quality of the new Lenovo ThinkPads (2.2k€ for such a plastic toy - rly?) I started installing a Debian sid with XFCE d/e. There were a couple of problems to solve, especially this rattly one-click-fits-all clickpad needed a lot of caring and compiling. And not to forget the first two days of my odyssey trying to boot up the machine with my OCZ Vertex 2 SSD installed with any format, partition table protocol or whatever firmware loaded - which was a sobering and vain experience. I ended up taking another SSD from my studio desktop which isn't only half the size but slower, too. 2.2k€ for a machine unable to boot a regular SSD - rly? Whatever, posting my whole snaggling-list would go far beyond the scope of this thread and we all know how capitalism and "consulting" works - so let's look forward.
There are lots of problems left but some of the major ones are:
Bad sound in Linux
Bad color reproduction from the 3k display in Linux
Sound:
In Windows the sound is quite nice. I know that it's a problem of alsa/pulseaudio drivers and that the community has to create appropriate drivers first. But there's no information around by now about the capabilities of the installed sound chip to create some usable workarounds:
Is there a subwoofer built in?
Or other channels/speakers I can route some signals to?
How is this full, brilliant and wide sound achieved in Windows?
Because just using the stereo speakers at the front edge of the notebook sounds really crappy. Routing the signal through an equalizer gets back some of the highs and the "bass" and eliminates some of the bugging mids around 1.5k but it is still far from the sound experience in Windows. And it brings in some problems because I have to setup a dirty workaround via DBus to select different presets in the e/q depending on the selected output device (speakers or headphone jack) which introduces more and more problems with muted channels after plugging a headphone aso.
Display:
The colors look quite okay in Windows, in Linux it's a yellowish-green mess. Since I read about the pretty poor quality of the built-in colorimeter before I ordered this device I didn't buy it in anticipation of the tutorials about using the Windows color profiles in Linux. Unfortunatley copying the profiles from the Windows HDD (C:\WINDOWS\System32\spool\drivers\color) and loading any of them via xicc, xcalib or any other tool handling color profiles does nothing to the color reproduction of the display. I found a profile made by a helpful person somewhere on the internet (notebookcheck? Unfortunately I don't remember) which makes this display kind of usable but it's far from being correct since it introduces a greenish inking at the lower end and a rose red one in the middle of the spectrum. Additionally the overall gamma curve doesn't fit that well. But at least it draws white as white and eliminates the overall lime style of the device.
Résumé:
Maybe I'm just an idiot, too dumb to correctly copy and apply color profiles or to use alsa/pulseaudio the correct way. If so I would be very happy about anyone who would lead me in the right direction. Perhaps someone stumbled over the same problems and has some fixes or at least ideas where to look at. Perhaps someone calibrated his 3k display with a professional colorimeter and is willing to share the results.
If someone is interested in e.g. my Xorg config, the amd64 DEB package for getting a usable clickpad, the slightly working color profile or other informations I'm able to share, please let me know.
Disclaimer:
I can understand if anyone is deterred by this rant in a way that she or he avoids to talk to such a poor goof, but perhaps someone understands my vast disappointment after spending a huge amount of money and a lot of time for a brand which is (was?) well known under (Linux-) enthusiasts for the outstanding build quality, the overwhelming compatibility and the ubergood hardware which was built into ThinkPad machines in the past. I owned, sold, recommended and installed lots of these notebooks before, my own last two machines were two t61p which I would call the peak in quality of this brand. But those times definetly seem to be over.
Thankful for every hint to make this thing more usable, best, Markus.
Your ads here!

Here's another profile I stumbled upon. It was made for the T540p shipped with the same display. It is a little more even, so less different colours in the overall grayscale and it has a better gamma curve. But it has an overall greenish touch just like the display without any profile but considerably less.
http://mein-neues-blog.de/files/t540p.icm
And to prevent users from searching I upped the profile from my last post to my blog, too:
http://mein-neues-blog.de/files/LEN40B5.icm
BTW I'm actually hacking a GTK application for manipulating the ramps of a LUT profile in realtime since those profiles are not that bad but need a little tweaking to fit my own display.
Your ads here!

Error in browser - Sys.WebForms.PageRequestManagerParserErrorException

I received following message in browser - when i click on error icon in browse. Any idea what could be the reason how to
resolve it
==================================================
Webpage error details
Message: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace
is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.
Line: 5
Char: 62099
Code: 0
URI: http://mossdev/ScriptResource.axd?d=7XM9mXhJYBs_Rebls9ePTRUPL5kAW6mTTENJEaHW_04gC-IW60rnFxmljHQp7B9GFD73EPvTz26Ep92TQlDtGuOCHhU26N0H-w5KubuBFrMxn5zjsuYTqneImI_sAxSN0qUNkti6hLr4fY_pEb_bSSEO0r01&t=ffffffffb868b5f4
==================================================
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

Hi,
The error is occurred when you have a SSRS report with SharePoint Integration Mode.
I recommend to add the below entry to the web.config for the "SharePoint" web app that your report is running under.
<add key="aspnet:MaxHttpCollectionKeys" value="100000" />
You can also increased the timeout value to 10 on rsreportserver.config .
In addition, you can change the TCP Port.
Here are some similar threads for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/656b454e-b6b0-4d1e-9eb2-e8974698a886/ssrs-in-sharepoint-integration-mode-with-sp-2010-?forum=sharepointgeneralprevious
http://social.technet.microsoft.com/Forums/en-US/7eb05eab-ce89-4c82-9ccf-62ed7c4238c7/syswebformspagerequestmanagerparsererrorexception-on-ssrs-2008?forum=sqlreportingservices
http://social.technet.microsoft.com/Forums/en-US/69a288c1-2feb-40ff-9816-80e05f9b4cfe/ssrs-2008r2-new-issue-on-report-in-production-?forum=sqlreportingservices
If still no help, for quick and accurate answers to your questions, it is recommended that you initial a new thread in SQL forum.
SQL Server Reporting Services, Power View
http://social.technet.microsoft.com/Forums/en-US/home?forum=sqlreportingservices
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Only iTunes shows up in the Music and Sound media browser

I just upgraded to FCP 10.1 and I'm noticing that the media browser only show iTunes content in Music and Sound. No sound effects (foley, etc.) are included as before.
Is this simply that FCP no longer includes these or should there be something other than iTunes there?

Thanks Tom. After a few reboots, music is back. Thanks again. Looking for the "solved" button and nothing. I will marked solved when I am able to.
Thanks again.
Best.
Tom

10.4.10 - no sound in browser

Hi guys,
Since updating to 10.4.10 (Power PC) I can no longer get any sound through my web browser (neither Firefox nor Safari - both latest versions).
I've heard of people having sound 'popping' problems but not a complete lack of sound. For instance, Youtube videos etc have no sound, nor do websites that are supposed to have sound.
Apart from that, software such as iTunes works fine.
Is anyone else experiencing this or can offer any advice?
Many thanks,
Rick
iMac G5 17 (Rev. B) Mac OS X (10.4.1)

I tried both your suggestions but still no change.
The 10.4.10 update has definitely increased my Mac's maximum sound output. It's now a lot louder than it used to be, but at the expense of killing sound in my browser
iMac G5 17" (Rev. B) Mac OS X (10.4.10)

Problem in jdic web browser in linux mandriva

hi all
i m embedding web browser in jframe using jdic ......
its working fine in Windows but in linux mandriva 2008 it giving following error::
Locking assertion failure. Backtrace:
*#0 /usr/lib/libxcb-xlib.so.0 [0x9074a706]*
*#1 /usr/lib/libxcb-xlib.so.0(xcb_xlib_unlock+0x32) [0x9074a862]*
*#2 /usr/lib/libX11.so.6(_XReply+0xec) [0x907a01fc]*
*#3 /usr/java/jre1.6.0_04/lib/i386/xawt/libmawt.so [0x908c38ce]*
*#4 /usr/java/jre1.6.0_04/lib/i386/xawt/libmawt.so [0x908a0067]*
*#5 /usr/java/jre1.6.0_04/lib/i386/xawt/libmawt.so [0x908a0318]*
*#6 /usr/java/jre1.6.0_04/lib/i386/xawt/libmawt.so(Java_sun_awt_X11GraphicsEnvironment_initDisplay+0x2f) [0x908a061f]*
*#7 [0xb4c9a3aa]*
*#8 [0xb4c92f0d]*
*#9 [0xb4c92f0d]*
*#10 [0xb4c90249]*
*#11 /usr/java/jre1.6.0_04/lib/i386/server/libjvm.so [0x637338d]*
*#12 /usr/java/jre1.6.0_04/lib/i386/server/libjvm.so [0x64fd168]*
*#13 /usr/java/jre1.6.0_04/lib/i386/server/libjvm.so [0x6373220]*
*#14 /usr/java/jre1.6.0_04/lib/i386/server/libjvm.so(JVM_DoPrivileged+0x363) [0x63c90d3]*
*#15 /usr/java/jre1.6.0_04/lib/i386/libjava.so(Java_java_security_AccessController_doPrivileged__Ljava_security_PrivilegedAction_2+0x3d) [0xb7c9a96d]*
*#16 [0xb4c9a3aa]*
*#17 [0xb4c92da7]*
*#18 [0xb4c90249]*
*#19 /usr/java/jre1.6.0_04/lib/i386/server/libjvm.so [0x637338d]*
Locking assertion failure. Backtrace:
*#0 /usr/lib/libxcb-xlib.so.0 [0x9074a706]*
*#1 /usr/lib/libxcb-xlib.so.0(xcb_xlib_lock+0x2e) [0x9074a7ce]*
*#2 /usr/lib/libX11.so.6 [0x9079f251]*
*#3 /usr/lib/libX11.so.6(XGetVisualInfo+0x29) [0x90795b89]*
*#4 /usr/java/jre1.6.0_04/lib/i386/xawt/libmawt.so [0x9089f319]*
*#5 /usr/java/jre1.6.0_04/lib/i386/xawt/libmawt.so [0x9089f565]*
*#6 /usr/java/jre1.6.0_04/lib/i386/xawt/libmawt.so [0x908a03c9]*
*#7 /usr/java/jre1.6.0_04/lib/i386/xawt/libmawt.so(Java_sun_awt_X11GraphicsEnvironment_initDisplay+0x2f) [0x908a061f]*
*#8 [0xb4c9a3aa]*
*#9 [0xb4c92f0d]*
*#10 [0xb4c92f0d]*
*#11 [0xb4c90249]*
*#12 /usr/java/jre1.6.0_04/lib/i386/server/libjvm.so [0x637338d]*
*#13 /usr/java/jre1.6.0_04/lib/i386/server/libjvm.so [0x64fd168]*
*#14 /usr/java/jre1.6.0_04/lib/i386/server/libjvm.so [0x6373220]*
*#15 /usr/java/jre1.6.0_04/lib/i386/server/libjvm.so(JVM_DoPrivileged+0x363) [0x63c90d3]*
*#16 /usr/java/jre1.6.0_04/lib/i386/libjava.so(Java_java_security_AccessController_doPrivileged__Ljava_security_PrivilegedAction_2+0x3d) [0xb7c9a96d]*
*#17 [0xb4c9a3aa]*
*#18 [0xb4c92da7]*
*#19 [0xb4c90249]*
and my configuration file for setting environment variable is .bash_profile::
its like that:
*# .bash_profile*
*# Initialize keychain if needed*
*if [ -r $HOME/.ssh/identity -o -r $HOME/.ssh/id_dsa -o -r $HOME/.ssh/id_rsa ]; then*
*     if [ ! -d $HOME/.keychain ]; then*
*     keychain*
fi
fi
*# Get the aliases and functions*
*if [ -f ~/.bashrc ]; then*
*     . ~/.bashrc*
fi
*# User specific environment and startup programs*
PATH=$PATH:$HOME/bin:/usr/java/jre1.6.0_04/bin
export PATH
**MOZILLA_FIVE_HOME = $MOZILLA_FIVE_HOME:/usr/lib/firefox-2.0.0.13/mozilla-firefox-bin**
**export MOZILLA_FIVE_HOME**
**LD_LIBRARY_PATH = $LD_LIBRARY_PATH:$MOZILLA_FIVE_HOME**
**export LD_LIBRARY_PATH**
unset USERNAME
please help me...........

You're on your own. When I tried to use this it appeared they had abandoned the product without fixing it to work with Firefox version 3, so I downloaded the source code and fixed it myself (to not try working with Firefox). You're entitled to make your own fork too.

Pacman sounds on browser

every time I am in firefox I get a pacman sound that does not shut down. I have not downloaded any programs from the browser.
== Today

It's just the Google homepage tribute to Pacman turning 30 today. A playable game starts up automatically, use the arrow keys to move Pacman. It's fun!
You can get Ms Pacman to appear in that game by clicking the "insert coin" button twice and using the WASD keys to move :)
You can also just change your homepage to something other than google until tomorrow.

Quality sound cards with good linux support

Since my Auzentech XFI forte is doomed on linux according to most of the internet (if you have one and made it work then please PLEASE tell me how ) I'm gonna need a new one. Onboard sound just doesn't cut it anymore for me.
What I'm looking for is a good quality sound card that works perfectly on linux and isn't too expensive.
I don't care about 5.1 or 7.1, I mostly use headphones so high quality stereo output is of most importance.
Are there any sound card manufacturers that have some love for linux?
How are the Asus Xonar cards. I've read good reviews about them but I know nothing about how they work on linux.

I had an M-Audio Delta 1010lt once that had studio quality sound, linux support is good on the entire delta series.
Also look here:
http://alsa.opensrc.org/index.php/Alsa_ … Soundcards

Flash Player trust file not working with Embedded browser on linux

Hi,
I have an application which embeds a browser based on
Xulrunner inside it. I have couple of flash swf files I need to
load in the browser. The swf files talk with a javascript to change
the page title and also to change the URL when I am browsing
through the content in the URL. I need the URL change because I
need to remember where I was in the flash content so that I can go
directly to that place in the flash file when I open my browser the
next time.
To let the swf file do this I created a cfg file and placed
it into the Flash Player Trust folder( I tried both the local one
at /home/user/.macromedia/Flash_Player/#Security/FlasPlayerTrust
and global trust file location at /etc/adobe/FlashPlayerTrust ) ,
but I didn't get the expected result. I debugged into my app and
found that the swf never reset the Title of the page( which
indicates that the javascript was blocked) . It works fine from a
firefox browser but not from inside my embedded browser. My app
also works fine on windows and Mac . This is observed only on
Linux. Can any body think of what else I need to do get my
javascript embedded in the flash file working?
Thanks
jbsp72

I tried out a few more things since nobody on this forum was
responding. I tried installing another application which also
embeds xulrunner browser. So I downloaded Prism which is a simple
xulrunner based browser. The flash works fine with that and the URL
gets set appropriately. So is there any setting I need to do to get
it working. Or could somebody atleast point me to the right place
to ask this question? :(

No sound through browser upon wake

I've been posting this question, but nothing helpful. It is SO frustrating to have no sound when visiting a website after the computer has been in sleep mode. I may have a dozen browser tabs open, but I have to close the browser and reopen it to immediately get sound back. It's very consistent. Surely Apple is aware f this and must be able to provide a solution?
I am using google chrome (horrors) as browser. I HAVE NOT been using Safari so don't know if it also happens with that, but I'll bet it does.
I'm using the most current OSX on a late 202

Sometimes computers have minds of their own, they decide to change something that has worked perfectly for years, and then stymie us. Resetting the SMU is not that simple, it's just one of a number of things one can do to deal with a recalcitrant machine, and I'm sure you would have arrived at it on your own, after all, you had already tried several other things.
Anyway, glad that the problem has resolved, and happy that I was able to help,
Miriam

No sound in Browser

Hi All,
I know this topic has been discussed till death in other posts, and belive me I've read a lot of those. But for all my efforts I'm not able to make sound work on any browser(firefox/chromium). I've been able to make sound work for sound applications like mpg123/clementine etc.
I haven't installed flash and am running only youtube videos. I've tried playing around with asoundconf, alsamixer but nothing works. The aplay command shows the following devices.
[cheema@screwed ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: 92HD87B1/3 Analog [92HD87B1/3 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'm guessing the browsers are trying to access the HDMI device rather than the analog one. Is there a way to force the analog devices as default for browser?
Last edited by noarch (2015-01-21 15:52:43)

Hi All,
I know this topic has been discussed till death in other posts, and belive me I've read a lot of those. But for all my efforts I'm not able to make sound work on any browser(firefox/chromium). I've been able to make sound work for sound applications like mpg123/clementine etc.
I haven't installed flash and am running only youtube videos. I've tried playing around with asoundconf, alsamixer but nothing works. The aplay command shows the following devices.
[cheema@screwed ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: 92HD87B1/3 Analog [92HD87B1/3 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'm guessing the browsers are trying to access the HDMI device rather than the analog one. Is there a way to force the analog devices as default for browser?
Last edited by noarch (2015-01-21 15:52:43)

No sound in browser; sys: linux

Similar Messages

Maybe you are looking for