NO Sound in Flash Export?

Just exported a large Project to Flash, but the sound is missing? Same project as DVD File and burned as DVD works fine. Please help.
JJ

I am having a similar project where CS4 Encore builds flash project that is missing sound from the initial intro, but the sound is fine elsewhere in the Flash. On the DVD build, all the sound is fine.
How I made the project: I had a single sequence dynamic linked from Premiere pro. I duplicated the sequence to "Title Sequence", and then trimmed the "Title Sequence" to just the first five minutes which was credits with a song which was audio track copied from a later section of the video that came from a camera (these were the first two chapters). I set the DVD to start with the Title Sequence, then go to the main menu. Play on the main menu goes to third chapter.
* The DVD starts, shows the two chapters with the song just fine, then goes to the menu. The flash app also shows the first two chapters before the menu, but no sound. If I click on play, it jumps to chapter 3 and there is sound, and if I use the chapter back button, I can go back to chapter 1 & 2, and they have sound. However when doing that, the chapter 1 & 2 being viewed is probably part of the original sequence.
I am using Windows XP.
I looked at Audio Hardware Settings for input, and I have no devices to Enable.
* My notes: http://www.bobsgear.com/x/BABwAQ

Similar Messages

Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored.

I have bopped around the forums here for a while now, and while other people seem to have had the same problem as I am having in the past, I come to find that all of the solutions that have worked for others, do not in fact, work for me.
I am running Flash Professional CS6 On an Acer Aspire. 4 Gigs of RAM, 500 Gigs of HD.
The exact problem that I am having is as follows:
I record a sound bit in Audacity, Export the sound as and MP3 File on my main computer Hard Drive.
go to File>Import>Import to Library, I locate the file that I had created, then select it to be imported to my Library.
I then create a new layer in my timeline, Label it as sound, place a new key frame into the timeline layer at the place in the animation that i hope the sound would start, set the audio sync to stream instead of event, then press CTRL+ENTER, which initiates the Test Movie function.
At this time, the "Output" box Pops up and it states,
"Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored."
No sound is played and i cannot, for the life of me, figure out why. I have tried all the troubleshoots that i can find online. I checked the publishing settings and nothing is being Overridden, I've attempted to untick the "export device sounds" option, but it is grayed out and cannot be toggled. I have attempted switching the MP3 format sound clip to a WAV format sound clip. I have attempted to re-recording the sound clip and re-importing the clip to the library. I have checked my computers speakers and everything is in working order and i have even checked to see if other projects sound works.
I pulled up a previous project that i had finished a while back that had loads of sound imported the exact same way and it all works exactly as i expect it too. The sound plays, there is not "Output" box claiming an issue. It seems that the issue, whatever it might be, is stuck to this project itself.
I have even started a new project, imported and placed both the MP3 and the WAV files into the sound layer created, CTRL+ENTER, and it works just fine without problem.
If there is anything that i might have accidentally messed up in this projected that you know about, like settings that may have been changed that would cause such an annoying and seemingly unfixable issue, please let me know. I really do not want to loose this project over such an utterly stupid error.

I've moved your question to the Flash Pro CC forum.

How can I add sound to SWF Exported from Imageready

I am making an animation in image ready, and I would like to ad sound to it. I am new to Imageready still getting use to making animations. How can I add sound to my exported animation?

As Mylenium suggests, using Flash, or Premiere Pro, will allow you to add the Audio. With the SWF, Flash would be the first choice on my system. There are also other programs, with the capability to edit the SWF. Moyea has some, and there are also freeware editors.
I have an old version of Swish (supplemental to my Flash program), but do not think that my old-timer has any Audio capabilities - maybe I just never looked?
Good luck,
Hunt

Bizarre Sound Distortion on Export - Not Newbie Compression issue

I'm trying out the Flash CS3 demo - OSX. (Using OSX 10.4.10.)
I've got a slightly complicated timeline with about 8 layers
and some things alpha fading in and out, and a bunch of sound
samples being used as timeline sound effects (forget the term, but
attached to frames not streaming). No scripting.
The sounds are mostly too long for the amount of time
allotted to them in the timeline, and cut previous sounds off. I'm
speculating this might be a possible issue. That is, I have say a 5
second sound, which has only 3 seconds of time to play, before
another sound interrupts it in the same timeline layer.
There are two separate layers of sound playing at the same
time.
All the original sounds are imported into the movie as
44.1/16bit AIFFs. They are mono files (might be another possible
issue).
I'm trying to export with quality of 128k MP3. I've been
trying different variations:
- setting the compression for the audio files in the
Library/setting movie export settings to use Library settings
- setting audio files in the Library to use "default
compression", and specifying the correct 128k MP3 setting in the
export settings
- or both of these (set individually in library, then
overridden in export settings).
I've tried with and without the "use mono" setting (both in
Library files and export settings). (This is a question for me:
what should be the correct setting for that when the original file
already is mono?)
Sometimes everything's great. I test or export the movie and
the sound is fine.
Other times I test or export the movie -- with exactly the
same audio settings as the last time when it worked -- and now get
unbearably hideous hissing/cracking instead of the correct sound.
Most dangerously -- I think but haven't quite convinced
myself -- the same flash export file may sometimes play fine, and
sometimes play with the distortion. So I'm not sure if this is an
export issue, Flash player issue, or combination of export doing
something semi-weird that the player only sometimes chokes on. A
"bad" export is distorted both in the desktop Flash player that
comes with the Flash demo, and in a browser with Flash plugin 9 r45
(OSX).
GUH!
And this is the $800 product which is little more than a
basic text editor for scripting and an animation timeline that
hasn't gotten updated functionality since 1999.

This is a peer-to-peer public forum - if you demand
individual and undivided attention to your issue
then you can use the official adobe tech support.
As for your issue...let's go step by step:
[*The sounds are mostly too long for the amount of time
allotted to them in the
timeline, and cut previous sounds off. I'm speculating this
might be a possible
issue. That is, I have say a 5 second sound, which has only 3
seconds of time
to play, before another sound interrupts it in the same
timeline layer.*]
Is this intended? You are having an issue with 5 second
sounds being cut off after 3 seconds...why
not place them on different layers to avoid this? I don't
understand the workflow here.
[*There are two separate layers of sound playing at the same
time.*]
Ok - that makes more sense, so you have 2 layers both
containing sounds that cut each other off?
[*All the original sounds are imported into the movie as
44.1/16bit AIFFs. They
are mono files (might be another possible issue).*]
Mono shouldn't matter - but the quality of the original will
matter - specifically the levels, if
the overall level is originally too high (or "hot"), then
clipping will occur once compressed from
Flash (in some cases).
[Sometimes everything's great. I test or export the movie
and the sound is fine.]
Can you provide the FLA?
[Other times I test or export the movie -- with exactly the
same audio settings
as the last time when it worked -- and now get unbearably
hideous
hissing/cracking instead of the correct sound.]
Never heard of this before - need to see the FLA.
[And this is the $800 product which is little more than a
basic text editor for
scripting and an animation timeline that hasn't gotten
updated functionality
since 1999.]
You may take exception to this but it sounds very much like
user error or something beyond Flash
(like an issue with the source audio files). Your opinion is
subjective but AS3, Flash, Flex is
hardly "little more than a text editor". True the timeline
hasn't changed much over the years but
funny that it is still the king when it comes to animation
across so many mediums - why fix what
ain't broken and works so very well for so many worldwide?
Chris Georgenes
Adobe Community Expert
www.mudbubble.com
www.keyframer.com
www.howtocheatinflash.com
Mr Distortion wrote:
> Boing.
>
> These Adobe boards are not very useful with so little
traffic (how many posts
> with 0 responses?). And having such noticeably little
traffic keeps the traffic
> low -- why waste precious time posting as I have done
with such little chance
> of assistance?
>
> Solution: get Adobe support people in masquerading as
users to actually get
> questions answered, so the boards will grow in
popularity, and eventually be
> self-supporting.
>

No sound when I export my movies with QuickTime for windows.

Using QuickTime Pro for windows and getting no sound on my exported movies. Won't even give me the option of adjusting the sound on options then movie settings. Any ideas? Thanks...

QuickTime Pro can't extract audio from muxed file formats (MPEG 1 or 2 and Flash).
MPEG Streamclip (free) can.

Keynote 3 and Flash Export

Did anything happen with this upgrade to make for better SWF/Flash exporting?
Thumbs up, Thumbs down?
Any progress?

It sounds from some reports that Apple turned off most or all of the transitions, and added the ability to embed mp3 audio (other formats don't work). Other than that I don't know yet.

Looking for a sample of the Flash Export from Encore CS3

I am close to upgrading to the CS3 Production Premium and one of the features that intrigues me is the Flash export from Encore CS3. I have searched the Adobe site without success for a sample of what an exported project looks like and functions on the web. Can anyone point me to a on-line sample of an exported project? Thanks in advance :)

'Black Gaps' in Flash usually come from the Flash trying to locate & load the next Flash file. Without a Pre-Loader, you will probably always have this... especially if your quality is set too high. This equates to longer load/buffer times which means there is nothing to display until there is enough video loaded in the buffer to play.
If your ultimate goal is to create Video for the Web... you'll need to learn proper techniques for producing video for the web. It is much different than producing video for TV or DVD. On the web you have to compress your video a lot more therefore you should not use a lot of Motion/Movement in your Characters, Camera, Media, Motion Backgrounds, etc. The less Motion/Movement you have means you can lower your quality settings but still get awesome looking video & good load times eliminating the Black Gaps and making an all around smoother internet presentation/experience.

[SOLVED] No sound (with flash)

Hello.
I have no sound with flash. It does work elsewhere.
I am using ALSA.
My flash should output audio correctly according to wiki: https://wiki.archlinux.org/index.php/Fl … d_in_Flash
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
EDIT: I'm retarded. I didn't add my user to audio group. And sound elsewhere was from speaker-test which needs SU.
Last edited by handl3r (2012-01-22 07:39:34)

codemac wrote:
Orrrr it's because the flash plugin uses OSS.
run `aoss firefox` and be happy.
OSS does still work or at least the alsa backwards compatibility layer that emulates the old interfaces, right? did i miss anything?
for newer versions of flash (like version 9) simply install firefox in wine and let it install the plugin. that usually works great!

No Sound on iTunes exports on Apple TV

So I finally got to use iMovie '09 yesterday, and really enjoyed the new features. I threw together a short film featuring my baby girl, and exported it, as usual, in large, medium, and mobile to iTunes and my MobileMe gallery. So far so good....
The movie plays just fine on MobileMe, on my iPhone, and on my MacBook Pro through iTunes. However, when played on my Apple TV there is no sound. Content exported from iMovie '08 plays just fine, as do movie and TV shows purchased/rented through iTunes. Any thoughts or suggestions?

I've not used this particular track, but none of the sound is playing, not just the music. Sound recorded by the camcorder is missing as well.
I'm using version 8.0.2 of iTunes and the Apple TV is running the latest firmware/software. Everything else on the Apple TV plays without problem. This includes rented HD movies, purchased TV shows, movies created in iMovie '08, music, and photos from Aperture. The first, and only, piece of content I've had issue with is the movie created in iMovie '09.

How do i include transitions in Flash export?

when I export my Keynote presentation to Flash, the transitions I selected disappear leaving way to a simple change of screen. I was wondering if there was a way to preserve all transitions and effects in the Flash export.
Thank you for your help!

I am pretty sure its not possible at this stage.
As most ads like Mochi etc are in fact .swf files loaded in from the web, which is not supported on the Iphone. ( as those would be actual 'Flash' files where as the app you are running is compiled to Xcode )
PS: hmm i just realised you were referring to the native Iphone Ads... well I dont know then! but is a really really interesting question! I suppose when Adobe releases a 'non-preview' version of the Packager they might open up some API to it.

Flash Export and Image Quality

When I place Illustrator CSx eps files in my keynote presentations and then export to flash it really chews up the images. You would think vector images would fair the best but the lines are very jagged making the presentation look very ugly.
Does anyone have any tips on improving this? I've tried PNG,jpg, etc.. the images I'm using are line art (e.g. diagrams) but it doesn't seem to help using other file formats.
I don't understand why there is no compression control available for flash export....
Mark

edit your image in photoshop and experiment with various settings/size. there's no magic high quality small file size setting.
it's a trade-off. the higher the quality and the greater the image dimensions, the greater the file size. you have to decide where those are acceptable.

No sound in Flash Player, using Ubuntu 10.04

As the title says, there is no sound in Flash Player.
I have:
flashplugin-nonfree-extrasound 0.0.svn2431-3
flashplugin-nonfree 10.0.45.2ubuntu1
flashplugin-installer
I also have gnash, klash, swfdec and some others.
Could you help me?

I switched to OSS, and it got fixed.

No sound in Flash applications like Youtube and Zynga-Frontierville. (Win7, ff 5.1, AdobeFlash 10.3.181.34)

I get no sound in Flash applications like Youtube and Zynga-Frontierville. Video is fine.

I'm not sure how related is this with the thing that happened to me but here it goes.
A while ago I couldn't have two applications that can use the audio channels at the same time. For instance, if I had a paused movie with VLC I could play a video on YouTube but with no sound. Is that your case? Or it doesn't work at all?

No Sound with Flash 10

Hi,
I'm back with a new problem. On a Gateway laptop running Windows XP, I have no sound with Flash. Sounds are coming through on Media player and with web sites home page. When I play a you tube vid or email vid there is no sound? ????
Thanks for your help.

I did the ten step codec cleaning, I think you posted that originally if not
I'll dig up the link, sorry I'm at work. After that I ran malwarebytes (no
malware), then I accessed the audio properties under the control panel and
monkeyed with them, they'd been changed to modem#0 from my normal semantec
harware. I changed that and rebooted and everything was seemingly okay.
However, the little speaker icon had disappeared from the tray about the
same time my audio problems had started and has never returned so there may
be deeper issues.
Here<http://www.codecguide.com/fix_for_flash_sound_problems.htm> is
the codec link I was referring to. Hope this helps. D

No sound in flash-related videos since I updated my browser and flash.

I updated my browser and flash. Before this I had no problems whatsoever with sound in flash videos. I was watching them just fine and then I installed the updates, and all of a sudden flash vids play fine, but have no volume. I tried adjusting the mixer volume on my system tray and nothing. I don't want to go uninstalling and reinstalling and losing years of settings because somebody couldn't code flash properly.
HELP!!!!!!!
== This happened ==
Not sure how often
== Today when I updated Firefox to version 3.6.4 and got the flash update of version 10.1.53.64

Hello C.
Hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
If you are having a problem specifically with Adobe Flash Player, you need to contact Adobe.

NO Sound in Flash Export?

Similar Messages

Maybe you are looking for