No sound in Flash movies [SOLVED]

Hi there.
This is the souncard: http://alsa.opensrc.org/index.php/Terra … 1_USB_MK.2
I replaced my /etc/asound.conf with the one in this wiki (Surround 5.1) since the .asoundrc is deprecated.
Now, Flash movies in Firefox(Dailymotion, Youtube) don't play any sound... It seems I have to configure something in /etc/modprobe.conf, but I don't know what exactly.
This is aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: Audio [USB Audio], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
aplay -L:
front:CARD=Audio,DEV=0
USB Audio, USB Audio
Front speakers
surround40:CARD=Audio,DEV=0
USB Audio, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Audio,DEV=0
USB Audio, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Audio,DEV=0
USB Audio, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Audio,DEV=0
USB Audio, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Audio,DEV=0
USB Audio, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Audio,DEV=0
USB Audio, USB Audio
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
and lsmod | grep snd
snd_usb_audio 76128 2
snd_usb_lib 14976 1 snd_usb_audio
snd_rawmidi 19104 1 snd_usb_lib
snd_seq_device 6924 1 snd_rawmidi
snd_hwdep 7300 1 snd_usb_audio
snd_pcm_oss 37024 0
snd_pcm 68996 3 snd_usb_audio,snd_pcm_oss
snd_timer 19204 1 snd_pcm
snd_page_alloc 8072 1 snd_pcm
snd_mixer_oss 14464 1 snd_pcm_oss
snd 44772 11 snd_usb_audio,snd_rawmidi,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6368 1 snd
usbcore 125420 6 usbhid,snd_usb_audio,snd_usb_lib,ehci_hcd,uhci_hcd
Is this a /etc/modprobe.conf issue ? Thanks in advance
Last edited by master-inferno (2008-03-30 16:44:51)

ALSA lib pcm_dmix.c:935:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
This is the error I obtain in console...
Can someone please help me ?
SOLVED !!!
I added
pcm.!default {
type plug
slave.pcm "asymed"
pcm.asymed {
type asym
playback.pcm "dmixer"
to /etc/asound.conf
Last edited by master-inferno (2008-03-30 16:44:33)

Similar Messages

No sound in Flash movies

About 2 weeks ago, I noticed that linked YouTube videos that
I had previously watched and listened to suddenly had no sound. A
little more investigation showed me that no flash videos had sound
any more. I've reinstalled several times, including both OS X
versions. I've used the uninstaller (which, by the way, does not
delete all of the Flash files in the Library folder). I've
reinstalled all of my browsers. No online Flash movie from any
source has sound on any browser.
Can anyone help?

I just reinstalled my system with XP SP2 and found that sound
in Macromedia Flash player (version 9) wasn’t working. I
compared it to another machine and found out that - for some
obscure reason - the wavemapper mapping was missing.
I tried reinstalling other versions of the Flash player, but
to no success … So I added the mapping myself via the
registry.
Go to the following sweetspot in your registry:
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Drivers32
Create a new String value named “wavemapper“. As
value give it “msacm32.drv“.
And that’s it, no restart necessary, all your Flash
embedded videos will have sound again :)

Only sound on flash movies

hi, i'm using win7 x64 and IE 10. Flash Videos on www.bluewin.ch (for example) won't work. there is only sound. in a different browser it works very well (Chrome). I tried out a lot of things to resolve this Problem: uninstall Flash -> install the newest Version / uninstall IE -> install the newest Version / disable Hardware acceleration / clean the registry manually from Flash Player reg_keys etc. / tried in an older IE Version (9.0.4) / uninstall the Flash Player with the uninstall tool... everything i tried ended with the same result -> still can't watch the Flash movies.... any other ideas to resolve this Problem? thanks!

Could you check to see if you have the following Windows update installed?
KB2670838 – Platform Update for Windows 7 x64
If so, please try updating your video drivers. If you continue to run into problems try uninstalling that KB and try again. For what it's worth, I was able to view videos on this page with IE9 and Win 7 x64.

Playback of sounds from flash movie files in authorware

Ive imported a flash movie file into authorware but the sound
is not playing back. In flash, I created a movie that includes
graphics and sounds. The movie plays perfectly when I open the
flash player but it doesnt play when imported into Authorware. Ive
tried publishing the flash file as quicktime but had a problem with
the handler on my computer. Does anyone have any
suggestions?

If you click the 'Options' button on the Property panel for
the Flash
movie, is the 'Playback > Sound' checkbox actually checked
in the
resulting dialog box?
When published as QT, what does 'had a problem with the
handler on my
computer' mean? Do you have QT installed on the playback
machine? Are
you using Insert > Media > Quicktime?
Erik
dcastil4 wrote:
> Ive imported a flash movie file into authorware but the
sound is not playing
> back. In flash, I created a movie that includes graphics
and sounds. The movie
> plays perfectly when I open the flash player but it
doesnt play when imported
> into Authorware. Ive tried publishing the flash file as
quicktime but had a
> problem with the handler on my computer. Does anyone
have any suggestions?
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.macromedia.com/support/forums/team_macromedia/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/groups?q=macromedia.authorware

How stop sound on flash movie when page reloads?

CLICK
HERE TO VIEW THE SITE
The problem is obvious. The flash banner has sound. Whenver
you go to ANY page the page reloads and the sound replays.
This template only allows you to use one header, so I cannot
make 1 with sound and 1 without sound.
Any ideas how I can handle this? Not sure if frames will work
in this case. Your ideas????

Use sharedobjects, they are kind of like cookies. You could
do something
similar like this sample I made here:
http://www.smithmediafusion.com/blog/?p=212
If the user has already seen your banner, make it go to a
different frame
and play somethin else OR tell the sound not to play. Make
sense?
Dan Smith > adobe community expert
http://www.dsmith.tv
"robertnzana" <[email protected]> wrote in
message
news:fgqn87$5n1$[email protected]..
>
http://stores.channeladvisor.com/Auto-Parts-Direct-To-You/
>
> The problem is obvious. The flash banner has sound.
Whenver you go to
> ANY
> page the page reloads and the sound replays.
>
> This template only allows you to use one header, so I
cannot make 1 with
> sound
> and 1 without sound.
>
> Any ideas how I can handle this? Not sure if frames will
work in this
> case.
> Your ideas????
>

Adding sound to flash movies

HI,
When I tried to import music to flash animations I have created, I received error message that:
One or more files were not imported because there were problems reading them.
The platform: Mac
AA audio file
Encoded with iTunes 10.1.2, Quick Time 7.6.6
Is it because of the audio file format that music cannot be imported?
If so, how can i convert it to the compatible format?

Thank you for your reply.
How can I convert it to an MP3 file?
Do I have to download software for that?

[SOLVED]No more sound in flash, but kmix shows a stream

Hello all,
I'm fairly new (and happy that I switched) to Arch . When I installed Arch on my x86_64 based laptop everything worked fine. Somewhere along the line I lost sound in flash. I use KDE with the defaults for sound: Phonon, Pulse, and ALSA. For my phonon backend I'm using VLC, but have also tried gstreamer. I first realized the issue in late November and have since been wrestling with it in my spare time to no avail. I have tried everything in the forums and wikis that I could find (even if it seemed like it didn't apply). The one difference that I'm experiencing that no one else has posted is that I have a stream show up in kmix when a video is playing, but still have no sound. It's not muted, and I can move the volume slider with no change. I have no idea when exactly it broke, or what update may have caused it. Has anyone had this issue and solved it without posting? Can anyone offer some troubleshooting advice? I was previously a Gentoo user of 6+ years and wonder if there are any Arch tools similar to equery (depends and depgraph flags) that can help me find all the packages installed that are related to flash? Also, is there anything in Arch that is similar to the Gentoo emerge log? I would like to clean out everything flash and pulse related and start from scratch, but don't know the best way, or even a clean way, to approach this.
Thank you in advance for any help offered.
Regards,
Joseph
Last edited by jdwieber (2012-01-13 18:46:16)

@alexkarro Thanks for your quick reply and for the links. Unfortunately, I followed the advice from both links. I have both lib32-alsa-plugins and lib32-libcanberra-pulse installed. From what I understand about the first link, my default device is the correct device. But just in case I'm wrong I pasted the output from aplay and my asound.conf below. Am I misinterpreting the output to aplay, or configuring my asound.conf wrong? Originally, when it worked, I got all the config instructions from https://wiki.archlinux.org/index.php/PulseAudio.
Thanks again.
jdwieber@beast:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
jdwieber@beast:~$ cat /etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
ctl.!default {
type pulse
# Explicit PulseAudio device
pcm.pulse {
type pulse
ctl.pulse {
type pulse
# vim:set ft=alsaconf:

Load flash movie which with sound problem

Hi, all,
I am doing a flash which with audio, the audio about 3-4 mins. But when i use another flash movie to load that flash mov with sound (using load movie function), cannot hear any voice. Why is it?
The flash movie with sound is use actionscript to attach the sound, when i test the movie, it is work. When it comes to load from another movie, it doesn't work. Anyone can help me to solve it?
Thanks.

What version of Actionscript are you using?

2 sounds in a flash movie

hello, i have 2 sounds in a flash movie, music and narration.
I have this script in frame 1 for narration sound:
_root.my_sound = new Sound();
_root.my_sound.attachSound("antedespacho");
_root.my_sound.start();
and i have a MC, in frame 1 of movie, and inside, in layer 1
this script for the music:
_root.fondo = new Sound();
_root.fondo.attachSound("musica");
_root.fondo.setVolume(0); -- every 5 frames i change the
volume for make fade in ;)
_root.fondo.start(0,99);
I have 2 buttons in main timeline for start/stop narration,
but when i stop the narration, the music stop. Where is the
problem??
This is the script of the button:
on (release) {
_root.donde = (_root.my_sound.position);
_root.my_sound.stop();
Thanks in advance.
Sonia

You must attach the sounds to separate movie clips. Then you
can control them separately:
this.createEmptyMovieClip("despacho_mc",
this.getNextHighestDepth());
my_sound = new Sound(despacho_mc);
my_sound.attachSound("antedespacho");
my_sound.start(0,1);
this.createEmptyMovieClip("musica_mc",
this.getNextHighestDepth());
fondo = new Sound(musica_mc);
fondo.attachSound("musica");
fondo.setVolume(0);
fondo.start(0,99);
and here's a handy script to automate your sound fade-in:
var tuneVol:Number = 0;
musica_mc.onEnterFrame = function() {
if (tuneVol>=100) {
tuneVol = 100;
delete this.onEnterFrame;
} else {
tuneVol += 10;
fondo.setVolume(tuneVol);

Flash movies makes horrible "flickering" sound with new graphic card!

I just bought a Gigabyte GeForce 460 GTX 1GB and now when I watch Flash movies
the movies makes a really bad "flick" flick" "flick" sound. If i scroll down and away from the actuall movie screen
the bad sound stops and the movie plays normally. But soon as I scroll up to the movie the sounds starts again.
Can't stand the bad sound quality anymore!
I tried latest Firefox & Internet Explorer.
I tried uninstall both flash and drivers then reinstall with the latest updates.
I tried searching the web for solutions.
My PC:
HP Pavilion
Intel Pentium 4 CPU 3.60GHz 360GHz
Memory: 3 GB
System type: 32 bit
Windows 7 Ultimate
My new Graphic card:
Link
Thanks for the help!

Hi, We'll have to continue later. From Adobe:
Due to system maintenance with Adobe.com, the log-in and authentication for the Adobe Forums will be temporarily unavailable for approximately 3 hours on Saturday, Sept. 11, 2010.
Maintenance will begin at 7:00 pm PST and will be complete by 10:00 pm PST. During this time, the Forums will be in Read-only mode.
We apologize for any inconvenience. Thank you.
by Mark Nichoson at Sep 7, 2010 10:02 AM
Expiring the announcement will not delete it but will remove it from the public announcement list. Are you sure you want to expire this announcement?
Are you sure you want to delete this announcement?
For my Time Zone, that is in about 10 minutes. EDT for me. 10PM PST
eidnolb

[SOLVED] Sound in Flash

Hi,
I got a problem with Flash in Firefox, everytime i start my computer and start a Flash video i have sound in it. But if
I want to start Teamspeak or VLC or any other programm which also have sound output, they crash or even dont start.
And if i close my Firefox or just the Flash-Video i am able to start the other programs and use them, but if i want to watch a flash movie or clip
the sound dont work anymore....
I think its a problem caused by me using PulseAudio, because this is only happening since i installed PulseAudio and got it working for all my
other applications.
I hope you can help me. And i allready searched for my problem but nothing helped me -.- .
Edit:
OK, I fixed the whole thing with a reboot... -.- And I don't know which trick from my tried finaly did it and fixed my problem... -.-
Last edited by Adock (2011-01-04 19:22:46)

Couldn't find any changes there:
I LC_ALL=C aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
I tried the multilib version and the x86_64 prerelease. Both did work perfectly fine before I rebooted (I tried which one works better recently and couldn't see any real difference). Didn't have trouble with flash for months before this reboot.
I found a few modules I was unfamilliar with were loaded:
snd_seq_os snd_seq_dummy snd_seq_midi_event snd_seq snd_seq_device
... and removed them with rmmod. No change. (I should have restarted alsa at that point I guess just to make sure, those weren't the problem?)
Then I changed the rate in asound.conf to 41000 and restarted alsa - now everything works again! Strangely, no more freezes too (those were reliable).
I remember having had problems with flash not having sound unless I set the rate to 41000 about a year ago. After some updates, I tried again and all rates supported by my sound-card seemed to work. My guess would be regression in whatever fixed that problem... but I don't know.
I'll leave that "unsolved" until I manage to figure out what it really was about.
Last edited by whoops (2011-03-24 22:17:11)

[SOLVED] No sound (with flash)

Hello.
I have no sound with flash. It does work elsewhere.
I am using ALSA.
My flash should output audio correctly according to wiki: https://wiki.archlinux.org/index.php/Fl … d_in_Flash
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
EDIT: I'm retarded. I didn't add my user to audio group. And sound elsewhere was from speaker-test which needs SU.
Last edited by handl3r (2012-01-22 07:39:34)

codemac wrote:
Orrrr it's because the flash plugin uses OSS.
run `aoss firefox` and be happy.
OSS does still work or at least the alsa backwards compatibility layer that emulates the old interfaces, right? did i miss anything?
for newer versions of flash (like version 9) simply install firefox in wine and let it install the plugin. that usually works great!

[solved] Sound in flash stopped working (alsa, x86_64, rate)

Why?
Sound in flash stopped working (alsa, firefox, x86_64). Tried flashplugin-prerelease from archlinuxfr: nothing different.
Everything worked before I rebooted. I changed nothing else since last reboot. Can't figure out what happened.
Updates among other things:
firefox, xulrunner (firefox I did restart - the new one had sound in flash before I rebooted)
openal, lib32openal (don't think that has anything to do with it?)
libsndfile (that's something entirely different, too, right?)
And a lot of others that don't look related... no Idea how many really, I haven't rebooted in quite a while. Maybe there even was a kernel update since last reboot. Or two.
edit: Also some interactive flash stuff that did work before has stopped working now.
edit2: Chromium doesn't have sound in flash either. Tried recompiling firefox / switching to AUR/firefox-pgo: no change. Everywhere else, sound is working fine. Also, several flash games I tried get stuck / freeze after intro.
Thx!
Last edited by whoops (2011-03-25 07:31:43)

Couldn't find any changes there:
I LC_ALL=C aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
I tried the multilib version and the x86_64 prerelease. Both did work perfectly fine before I rebooted (I tried which one works better recently and couldn't see any real difference). Didn't have trouble with flash for months before this reboot.
I found a few modules I was unfamilliar with were loaded:
snd_seq_os snd_seq_dummy snd_seq_midi_event snd_seq snd_seq_device
... and removed them with rmmod. No change. (I should have restarted alsa at that point I guess just to make sure, those weren't the problem?)
Then I changed the rate in asound.conf to 41000 and restarted alsa - now everything works again! Strangely, no more freezes too (those were reliable).
I remember having had problems with flash not having sound unless I set the rate to 41000 about a year ago. After some updates, I tried again and all rates supported by my sound-card seemed to work. My guess would be regression in whatever fixed that problem... but I don't know.
I'll leave that "unsolved" until I manage to figure out what it really was about.
Last edited by whoops (2011-03-24 22:17:11)

Sound in a movie clip malfunctions when play head is moved backward

Problem summary:
A sound (stream) placed inside a movie clip that is within another movie clip will start playing continuously when I use the play control to jump around on the main timeline.
Details:
I am using Flash CS3 but the same issue occurs with CS6. I've spent quite a bit time to search/research for the issue but didn't find a solution. To demonstrate the problem, I've reduced the flash movie to a very simple structure.
One the main timeline:
The first frame has a movie clip (Game MC) and a stop action.
Following the first frame, there are several frames, mostly empty except some text.
The last frame has a stop action.
On the Game MC timeline:
There is only one frame. On that frame, there is a movie clip (Card MC), and the stop action.
On the Card MC timeline:
It starts with 3 blank frames and a stop action.
Starting at frame 4, a sound (.wav format) is placed and is set to be "stream."
At the end of this timeline, there is a stop action.
From Flash CS3, I press Ctrl+Enter to test the movie. The movie stops on frame 1 of the main timeline with the card showing, no sound, as expected. Now I use "." to move the play head forward one frame at a time. No problem. I see the frames after the first frame. Still no sound, as expected. So far so good.
The problem starts when I use "," to move the play head backward, the sound in the Card MC starts to play, regardless where the play head is, even when the Game MC (thence the Card MC) is not on the stage. Worse, each press of "," will trigger another start of the same sound overlapping with the previous one. And the sound would continue in loops until I close the swf.
However, the problem will not occur if I place the Card MC directly on the main timeline. It only occurs when it is inside another movie clip (Game MC).
I need to solve this problem because the full version of the flash card game is to be placed in an HTML page with a javascript based play control, which allows the viewer to jump around in the swf timeline.
The fla file is at: https://docs.google.com/file/d/0B_5mgotjr4l5RDZaOGxFeFFWN1U/edit?pli=1
Am I doing something wrong? Is this a bug in Flash? Any insight will be greatly appreciated.
Keith

Thanks. But the problem is that the timeline for the movie clip (Card MC) where the sound is should not have been run because the play head is not on the frame where the Game MC is at (Game MC contains Card MC.) I also put trace actions on various frames on that timeline (for Card MC) and none was invoked. I have also tried to set the sound to "event" or "start". It made no difference.

No Sound In Flash Applications

Hello.
So, about 3 month ago or later, adobe had announced the new version of ADOBE FLASH PLAYER, i think it was 10.1. When i updated my flash player to version 10.1, my sound in my browser (im using MOZILLA FIREFOX) had gone. I cant hear any sound in youtube, i cant hear any sound in flash games, but video goes normal. I have searching reason for a long time. I have found many sollutions, and i have tryed all of them on my pc. Im a power user in computer, im not a begginer, but i cant solve this problem. Now i got Windows XP, SP3, and installed adobe flash player of version 10.1.82.76. Maybe some one can help me???

Hi eidnolb,
You are certainly right about resolving audio issues.
Actually you pointed me in the right direction when you told NoviceGG to go to administrative tools. While in the control panel I decided to check out QT first. I am not a big fan of QT and rarely use it but others in my house like to use iTunes for their iPods and QT comes bundled in the download. At any rate, iTunes was updated and along with it came an update for QT. I think someone downloaded an .flv file and when they played it with QT it set the streaming video default to QT. At least that is what I believe happened, although I am not 100% certain. I don't think QT was automatically set as the default streaming video player when it was downloaded but that is a possibility also.
I had no audio for any streaming video in any browser, FF, Chrome, and IE. Video was fine in all three.
Somehow QT gets it's own Control Panel category. Which is actually only QT preferences. Seven tabs across the top: Register; Audio; Browser; Update; Streaming; File Types; Advanced.
The first tab I clicked was the Audio tab. But that is more of a device manager and you can select bit rate, channels, and size (8 bit, 16 bit, or 24 bit). I realized that wasn't it then went to the Streaming tab and that deals with connection speeds, delays, and an instant-on option. Not it either. So I hit the File types tab and it reads; 'Select the file types for which you want QuickTime player to be the
default player.' Top box; Streaming-Streaming movies was checked. These are expandable boxes (with the + to show more specific file types). Seven expandable boxes to check or uncheck:
Streaming-Streaming movies;
Video-Video only and video with audio file formats;
Audio-Audio only file formats;
MPEG-MPEG system, video and audiofiles;
MP3-MPEG Layer III movies and streams;
Images-Simage files
Miscellaneous-Miscellaneous file formats
I unchecked the top box the tested it and that was it. I thank you very much for pointing to the control panel. You are a very helpful member of the forum.
I actually just now joined so I could share my discovery with NoviceGG.
I hope this helps you out with your knowledge base a little eidnolb.
Thanks again!
plee426

No sound in Flash movies [SOLVED]

Similar Messages

Maybe you are looking for