No Sound in Flash Videos but other sounds work fine.

OS - Win 7 Enterprise sp1
Flash Player version - 11.1.102.55
RealTek High Def audio driver ver - 6.0.1.6201
Rolling out a new Image for our offices, everything seemed ok then someone was complaining about no sound. Turns out Flash Videos(youtube) play but if you unplug the headphones and plug them back in you don't get audio unless your refresh the page. This behaviour only occurs in Flash videos, Windows sounds ok, Media played through Media player ok, Quick time ok, just the Flash videos are affected. I havent' been able to find a solution.
Most up to date audio drivers,Flash player.
As a side note, I did a install of nothing but Windows 7 and it does the same thing so there isn't anything I'm adding.
Any help would be appreciated.
Mark

If I understand properly, the audio will play all the time if you don't unplug the headphone while you are playing the flash video, then it works? It only doesn't work when you unplug the headphone and put it in while Flash Video is playing? And the workaround is refresh the page.
This sounds like the expected behavior in the current player.
If you think this is bug need to take care, you can post it to http://forums.adobe.com/community/flashplayer/using_flashplayer (release player forum) or log a bug in the bugbase.
Thanks,
Calise

Similar Messages

The new version of fire fox keeps crashing my entire computer if i pull down the scroll bar to fast and when using sites that use flash player my other browsers work fine its only started happening since it updated to 3.6.10

Firefox keeps crashing my entire computer if i pull down the scroll bar too fast or go to websites that use flashplayer and sometimes for no reason at all. My other browsers work fine and firefox did till the update.

There has been a security update of the Flash Player and the current version is 10.1 r85 , so you are two versions behind (previous was 10.1 r82).
See http://www.adobe.com/software/flash/about/

After I connect an ipod thro a usb cable, firefox will not load, but other browsers work fine.?

Firefox works fine and is my preferred browser, but after I connect an ipod to my computer it will not load. Even after the ipod has been removed firefox will still not load until the pc is restarted.

Open the Windows Task Manager > Processes Tab and see if there is a '''firefox.exe''' process running, when you can't open Firefox and you find it necessary ti restart your PC. When you try to open Firefox and a firefox.exe process is "hung", you should get a warning message that ''' "Firefox is already running" '''.

Problems with browsers & DNS, but other apps work fine

My computer woke from sleep this morning with an interesting issue. Some applications weren't connecting to the net, saying they couldn't find the host name (all three browsers and a chat program). But, other programs like my email program connected to the network just fine. iphone through the router also connected to everything just fine as well.
Changed DNS servers from google to comcast, and got the same issue, which is strange. Didn't get a chance to restart yet (had to get to work). If a restart doesn't clear this out, I'm not sure what to tinker with after that. Thoughts?
i7 "Santa Rosa" imac 27".
Latest rev of Snow Leopard. Last update was the security patch 2-odd weeks ago, and worked fine after that.
airport express (lastest software) connected to cable modem.
- John Mc

Hello:
You might try the connection doctor to see if it helps.
I had a problem sometime ago and used Open DNS to resolve it, but I do not know whether that will help (my problem went away when I changed ISP, so I removed Open DNS).
Barry

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

Crackling/substandard sound in flash videos (YouTube etc) regardless of video quality setting.

Hi all,
I hope you can help! Apologies if this is in the wrong forum, I'm struggling to find the best place to put this.
1. a summary of your issue
Crackling/substandard sound in flash videos (YouTube etc) regardless of video quality setting.
2. the type of computer you use—Mac or PC?
Desktop PC.
Windows 7 Ultimate 64-bit, all updates installed.
3. steps you've already taken to troubleshoot
The problem occurs after installing Adobe Flash Player 15 Plugin to any browser (I mainly use FireFox). It's listed as Adobe Flash Player 15 ActiveX when I installed it for Internet Explorer.
Before installing it, I can hear the videos fine but I am limited to a maximum of 720p quality on YouTube.
I removed my sound and graphics drivers, after restart Windows 7 decides it will install them again but as the generic/universal ones. No change.
I've heard that because I have the Windows Aero theme activated, I need to disable hardware acceleration - tried this in various ways:
a) Generic PnP monitor Troubleshoot tab - Change Settings button is greyed out (whether or not I have the real/generic/universal graphics drivers installed). Can't find a way through nVidia control panel to do this either.
b) Disabled hardware acceleration in FireFox - no change.
c) Found on your forum here that I can go to a page which will check my Flash version, in theory I could right-click it, hit Settings and disable hardware acceleration there - no "Settings" option in right-click menu. Seems the page has changed.
I can't seem to find a way to interface with Flash directly to disable hardware accelerattion - if this is indeed the solution.
Regardless of Windows Aero theme, I've got it on basic theme now and still the same problem.
I recently reformatted and re-installed my PC, it was working fine before I did this (maybe I had an old Flash release installed?).
I'm at my wit's end... please help!

Sorry, it's all sorted now. After re-installing the sound drivers, decided to tinker with the settings one by one. I had my Creative sound card in Game Mode, thus it was assuming 2.1 speakers aka headphones. Put it in Entertainment Mode and it recognised all the 5.1 speakers for flash videos. Doh!

Sometimes no sound in flash videos after boot?

Sometimes after I boot up the machine, I get no sound in flash videos. First I didn't know why it was happening, but as I read a few articles here on forum, I found out it was because of my USB webcam (logitech) - alsa was messing something up and didn't know how to handle sound drivers well (so they say). So one of the suggestions I found was to force the (in my case) snd_hda_intel module load before snd_usb_audio module during the boot process. I thought it worked, but after a while the same problem appeared again. If I just unplug the webcam from my computer, sound works perfectly on each boot, but I don't want to get down and insart the cam everytime I need it... Anyone have any suggestions what I should try to fix this? If I need to provide more information - please tell, and I'll provide it, just say which and how.
thanks

Oh God, this again.
Alright you're a newbie, but there is a SEARCH button. Read these, and then post something useful:
http://bbs.archlinux.org/viewtopic.php?id=91908
http://bbs.archlinux.org/viewtopic.php?id=89445
http://bbs.archlinux.org/viewtopic.php?id=62266

No sound in flash videos

I would like to say that I am not a native speaker and English is my second language.
Well, back to the topic. Sometimes safari stop playing sounds in flash videos. Its annoying because the only solution I found is to quit safari, start garage band, quit garage band and start safari again. After some research I found out that there is something wrong with sound frequency in preferences. Is there a permanent solution for this?

MIDI setup is set correct.
I did restart my computer. I know how to fix the issue. But I am sick of neverending Garage Band solving. Is there any pernament solution?

Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

I have m4v files that have subtitles and sound options they play fine on my computer in itunes and but when i watch them on my apple tv there is video but no sound ... why ?

I have m4v files that have subtitles and sound options they play fine on my computer in itunes and but when i watch them on my apple tv there is video but no sound ... why ? all my other videos are fine and they in mp4 format.

Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.

There's Video but no sound!

So i have some Tv show on my MacBook, and when i go to watch them there is video but no sound. Quicktime prompts me that i need to download a codec but not which one. Which onw do i need?

Tried that, it said i needed DivX, but i already have that. What else could i use?Try watching it in VLC. If it plays, check the audio info and see if it is more specific. What is the file extension -- .divx or .avi? What DivX component do you have installed? Do you have Mac "non-native" audio support (like AC3) installed? Until you can supply more information, I can only guess at possibilities for you to check and evaluate. You might also try opening the file in a conversion application like FFmpegX and see if he A/V formats are recognized/convertable to a fully supported QT compression format. As a last resort, consider a "rule of thumb here" -- if a format doesn't work, don't support its use.

Shows no video but has sound

Show no video but has sound what do I need to do to fix this?

Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

Got the video, but no sound...

I had videos I wanted to put on my ipod, but, the file couldn't be read, so I had to convert the songs so my ipod could read it, but it seems that when I play the video... the images come... but not the sound... I have no idea what to do, some help would be appreciated.
ps: it plays normal songs no prob, thx alot.

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, iTunes & the iPod (both of which use QuickTime) only show the video and no sound.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

No Sound in Flash Videos but other sounds work fine.

Similar Messages

Maybe you are looking for