No sound in Garageband after rewiring Reason to it

Hello all,
i hope someone knows the answer to the following.
I am using Reason 3 with a rewired track to Garageband 3. (GB 3 is my host application)
When I press play in GB, both GB and Reason start running, which they should do because they are rewired. But, whatever I try, I can't seem to get the Reason track sounding within GB.
Any suggestions here?
thanks!
Message was edited by: digitalperformer

Howdy,
I am sorry for this post, I am kinda new at all of this ReWire lingo.
I am glad I came across this post. I am having the same problem. I load GB 3 first. Then, I load Reason 3. I can hear the synthesizer in GB, but I also hear the piano setting. When I try to record I can hear the synth from Reason in GB, but when I playback I just hear piano?!?!
This may sound crazy, but I can NOT find my "Ableton Live" folder to delete. I have tried using the path through the Application Support, and it is NOT there!?
Am I taking crazy pills?
hope you can help.
jason.

Similar Messages

No sound in garageband after Lion install.

No sound in garageband after Lion install, can anybody help please?

12 hours ago my midi played through Garageband with no problems. Today it does not play. The Garageband window shows that the keys are being played.
In the moments following I turned on iTunes and all was fine so I burned a disc in my usual factory installed burner, late 2008 iMac, and the message was "no disc burner found". I turned iTunes on and off and same message. Ran Disc Utility and no flags. I am using the Disc Utility that is on my desktop. Is there a hidden Lion disc utility? Nothing worked unless there is a hidden function.
I was able to burn using Toast. This would indicate that the problems is with iTunes 10, OS 10.7.1

GarageBand 3: Rewire fails on Intel Mac

I tried to connect GarageBand 3.0.2 and Reason 3.0.5 via ReWire. No success. Transport and sync is working and Reason says that it is in ReWire Slave Mode. So far everything seems to be OK. Unfortunately, there is no audio output from Reason.
This happens only with GarageBand. Rewiring Reason and Live 5.2 is working fine on my MacBook.
Any ideas?
Thomas

I hope you're able to find a solution to this problem because I'm having the exact same issue. Please let me know if you've solved it since posting.

Can't rewire Reason 6 in Garageband, need help, please

Hi all,
I'm quite new to Mac (switched this week-end) and am trying to ReWire Reason 6 into Garageband '11 (6.0.4) on OSX Lion. All the doc and tutorials I could find on the web basically say to start Garageband and then launch Reason. Tried that but both are not in sync (and the output of Reason is not set on ReWire). I really don't know what to do and would appreciate any help.
Thank you for your time!

Well, I got an answer on the Prop's forum: simply launch Reason 6 in 32 bits mode and it works.

Cant rewire reason 5 to Logic 9 after Mavericks update

Hi there,
I am using Logic Pro 9.1.8 and Reason 5 and was having no trouble rewiring Reason to Logic untill I updated to Mavericks OS, after which Reason simply doesn't rewire to Logic anymore. I tried running Logic in 32 bit as well as 64 bit mode but it has't made any difference - I start Logic and then Reason (normal rewiring proceedure), but Reason is running independent and not rewiring.
Any ideas what I could do to fix this?

I'm the editor of the macProVideo.com Hub - where you can find loads of free useful tips and tutorials on Logic, Reason, After Effects, Pro Tools, etc.
Here's the link to the current Reason tutorials (loads more on the way):
http://www.macprovideo.com/hub/category/propellerhead-reason
Here's a link to couple of articles that are tagged with rewire too that may be helpful:
http://www.macprovideo.com/hub/search?query=rewire
If you need a more structured approach then I'd highly recommend the Reason video tutorials here:
http://www.macprovideo.com/tutorials/reason-application
Cheers
Rounik

No sound in garageband 10

I get sound when I create new account on computer and use garageband 10 in the new account but on my original account that I have used for five years, I don't get any sound and am unable to search for keyboard sounds in search window. imoji 2 for icons on my iphone poped up on my garageband screen when I treid to search for something in the garage band library. I deleted that app in itunes, which I use for backup for my iphone but garageband still has no sound. I also re-indexed loops with no success. I also restored purchases and that didn't work either. I have a midi keyboard with 61 keys which works fine in garageband in other "test" account with empty user settings. The apple store tried re-installing garageband 10 but that didn't work either. The apple store said I should wait for a software update that will fix the problem. Any ideas?

If the problem only occurs in your main user account, but not in a new test user account, you probably have something installed in your user library that is interfering.
I have a midi keyboard with 61 keys which works fine in garageband
Do you have any software/drivers installed for that keyboard in your main account? Which keyboard is it? Do you have any plug-ins installed, sound fonts etc, that are only installed in your main account?
The first thing to try is to delete GarageBands preferences files and to clear the caches in your user library. Reveal your user library like this, if it is still hidden:
Quit GarageBand .
Select the "Home" folder icon (the little house) in the Finder's sidebar and press the key combination ⌘J to open the "view options". Enable "Show Library Folder".
Now open the Library folder inside the Home Folder and remove these files to a folder on the Desktop: (Note, you will have to reenter all your preferences settings after this, so take a note of your settings).
~/Library/Containers/com.apple.garageband10/
~/Library/Preferences/com.apple.garageband.plist
~/Library/Caches/garageband
After removing these files, restart your system and try GarageBand again.
Compare, if you have anything installed in
~/Library/Audio/Plug-Ins/ or ~/Library/Audio/Midixxxxx in your main user account, that is not installed in your test account - any old midi drivers, VST plug-ins, that might need updating?

Help with rewiring Reason into Logic?

IM trying to rewire Reason into logic. When i insert a midi file into a channel and hit play reason will NOT play the midi and make sound.
Is there anything im missing?

All midi needs to be routed through Logic. Don't use the preferences in Reason to get midi to it by 'sidetracking' Logic.
All midi goes into the Master (Logic) and then goes to to the rewire slave.
Make sure you understand the signal path.
"SIDENOTE on Reason's 'BUS' system for internal rewire objects
Bus1: addresses the currently selected device in Reason (i.e., the little keyboard icon in Reason's sequencer is not grayed out)
Bus2-5: Uses Reason midi Bus A-D
Bus6 (and up): starting at the first device and goes till the 16th device in Reason's Rack. So in your Reason rack Bus6 can access device # (1-16), Bus7 can access device # (17-32), etc...
Bus6 is sometimes the most useful, but realize that you can run out of devices and then you need to go to Bus7 to access more devices in your Reason rack. "
That tells you everything you need to know. If you understand how the Environment in Logic works, you shouldn't have any issues setting up Reason as a Rewire Slave.
MBP 2.16 LP7.2.3 RME FF800 Mac OS X (10.4.9) RMX Reaktor 5.1.2 Reason 3.0.5 Live 5.2 Battery 3.0.1 Recycle 2.1 DFH

Where can i download jam pack 4 (orchestral sounds) for garageband 6.0.5. please. I have an air book maverick OSX 10.9.4. Thanks

Where can i download jam pack 4 (orchestral sounds) for garageband 6.0.5. please. I have an air book maverick OSX 10.9.4. Thanks

This JamPack is no longer sold separately by Apple. You could search for the boxed retail version of the JamPack at eBay or Amazon.
But it is much more economic to install MainStage 3 instead. You can buy it at the Mac App Store. MainStage 3 will install all five JamPacks for a price much less than the price of a single JamPack used to be. Afterwards the JamPacks will work with Logic and GarageBAnd as well.
Just launch MainStage after installing and use the command "MainStage > Download additional content" and select the JamPacks you want to install.

Rewired Reason with Logic

Hey guys,
I am new here. I successfully rewired reason so I can hear it in Logic, but the only problem is that I hear both programs playing the sound. There might be a quick and easy solution that I do not know of since I am quite new to logic.
Anyways hope you guys can help me out!

I had the same problem.... contacted Reason Support and they said the following :
"You have to go to Reason Menu > Preferences > keyboards and control surfaces and un-tick the 'Use with Reason' box next to your keyboard."
Trouble is that when you use Reason in Stand alone then you need to check the boxes back again.
Hope this works
Fingers...

No sound in Flash after Rhythmbox

(I am fully aware there are over 9000 threads about Sound in Flash, however, many of them are 64-bit issues, or they aren't similar enough to my issue to work.)
Running 32-bit Arch on a Sony Viao VGN-CR507E (Sound card is Intel, along with 90% of other hardware)
Using Alsa & Pulseaudio. For some reason, I seem to need both. Just -Syu'ed.
Have installed: (pacman -Qe | grep -i pulse; pacman -Qe | grep -i alsa)
alsa-oss 1.0.17-2
alsa-plugins 1.0.24-3
alsa-utils 1.0.24.2-3
pulseaudio 1.1-1
pulseaudio-alsa 1-2
If I play a Flash video in any browser before loading and playing music with Rhythmbox, sound works just fine.
If I listen to music using Rhythmbox first, Flash's sound is nonexistent, and no combination of mixer settings lets sound play.
This seems to possibly be a Rhythmbox issue, as Flash's sound works fine after using Audacious.
A flash video played in VLC seems to be unaffected by this.
(I'm switching to Audacious as a temporary fix until this is truly solved.)

I assume you already did this? https://wiki.archlinux.org/index.php/Pu … #GStreamer

In my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to S

in my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to Sort out the Problem?

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

Itunes sound stops working after 20 mins on videos bought from iTunes store.

On every video i've bought from the iTunes store the sound cuts out after approx 20 mins. I'm on windows 8.0 (completely up-to-date with all drivers up-to-date too) with the latest iTunes (11.1.3.8) and Quicktime (with enhancements switched off). PC is a quad core i7 with 16GB of memory with windows running on an SSD and my iTunes content on another internal HD (not an SSD). iTunes library is approx 24000 songs and 30 videos. i'm watching on a full HD monitor with external speakers and the PC is authorised to play iTunes content.
I've worked my way through all the iTunes support items around video chopping (which was happening too - now fixed) and audio issues but nothing helps e.g. I've switched off iTunes match and home sharing, switched off any audio enhancements in iTunes and my sound card (which is a Via chipset on my motherboard), switched the bit rate to 16 bit/44.1k on windows and itunes, uninstalled and re-installed iTunes etc, etc.
I did have an Apple TV on my network but I've disconnected it in case the sound was being routed to it after a period of time. This hasn't made any difference.
Has anyone had this issue and managed to fix it?
Thanks

Myself as well, have been having this same problem, around 20 minutes into any movie I open up in my itunes library, the sound stops playing. I have yet to find any fix for the problem, although I have a thought that it is probably something to do with the buffering. My songs play just fine, all day long, but any movie only plays for 20 minutes and then the sound goes out. Additionally, I had another issue that kept popping up an error message everytime I tried to open Itunes, this was finally fixed via copy paste a corruptted (spelling) .dll file. The only "workaround" for this issue, that I have found, is to open the movie in QuickTime, even though I am not really excited about the QuickTime player. If anyone finds a better solution, please drop a line. thank you in advance.

I can´t get the drum tracks of my Korg M50 to sound in garageband. Does anyone know how?

I can´t get the drum tracks of my Korg M50 to sound in garageband. Does anyone know how?

If it's actual audio out from the M50, you just need to hook up its audio outs into whatever you're using to get sound into the computer (audio interface, the computer's input jack, whatever it is that you're using), fire up a real audio track, and record.
But if you're having difficult with drum tracks, that's usually this:
Drum tracks on many MIDI devices default to MIDI channel 10. MIDI channel 10 is like the universal MIDI channel for drum tracks. However, GB likes to see MIDI channel 1, regardless of the instrument.
Therefore, if this is a MIDI issue, you'd need to change the MIDI channel on your drum tracks from 10 to 1 to make them GB friendly.

My ipod video sound cuts out after 30 sec

I play my movie and the sound cuts out after a while and then it only plays the video with no sound. It's not the video because it works fine on my computer and all the other videos are doing the same thing. I found if I rewind or fast foreward the sound comes back but only for a little while and the sound cuts out again.

This happens with the current firmware 1.1 upgrade on the iPod. You can downgrade the firmware to 1.0 and this will solve that problem. Doing it this way you won't have to restore the iPod which will erase it. If you can't do this then you can restore the iPod using the previous updater.
How To: Downgrade iPod Firmware
http://forums.ipodhacks.com/showthread.php?threadid=813
The other option is to use QT Pro which will work to correct the problem:
http://forums.ilounge.com/showthread.php?s=&threadid=146142
1) Open up the Video file in Quicktime Pro
2) Select File->Export
3) Select "Movie to MPEG-4" beside "Export:", then click the OPtions button
4) Select "Video" & make sure the "Video Format" is set to "Pass through"
5) Do the same for "Audio", then hit OK
6) Save the file

No sound in firefox after upgrade to Ubuntu 10.04

no sound in firefox after upgrade to Ubuntu 10.04. Youtube and Vimeo are both affected. Have sound in Banshee and MPlayer.
== This happened ==
Every time Firefox opened
== After latest upgrade to 10.04

Sorry, can't help you much with Ubuntu issues, I am a new Ubuntu user myself; except that you have two versions of Flash appearing in your Plugins Installed listing. Not sure if it will solve that particular problem, but you need to delete the Shockwave Flash 9.0 r124 version.

No sound in Garageband after rewiring Reason to it

Similar Messages

Maybe you are looking for