No sound in my laptop

Hi. I have a Pavillion dv7, beats audio. Recently, i cant hear what I record with my internal micophone. Please tell how can I fix it, ill be glad if you add some pictures to lead me, thanks

Hope this helps, it solved my problem
Sounds,  recording,  microphone, properties, at top click open the tab listen, uncheck listen to this device.
The reasonable man adapts himself to the world, the unreasonable man does not, therefore all progress depends on the unreasonable man

Similar Messages

  • Satellite A505-S6973 - No sound of my laptop speakers

    I own an A505-S6973 and today i lost volume on my speakers. When i jack in my headphones i get sound but without the headphones plugged in, I get no sound of my laptop speakers.
    I checked device manager for software problems but everything is cleared, also, my volume is fully on.
    I attempted a restore, but was unsuccessful, also i tried to uninstall and reinstall value added package but when attempting to launch the software after extracting it an error[0x8146045B] signals itself.
    This morning everything seemed to work fine, the only thing i can think of, i removed windows media my network places sharing.
    If this is the culprit can someone guide me on how I can re-install it. Also, the value added package issue, is there anything that can be done, because the buttong to enable/disable touchpad when depress nothing happens but if i use the function key with F9 it enables/disables.
    I really hope someone can help me, it seems this is an unlucky weekend for me.

    As I see, the VAP utility makes problems. The next step I advise you to do a little bit dangerous as you have to remove some elements in registry, but before
    1. Make the ,,Hidden Folders,, to be seen. (Control Panel- Appearance and Personalization-Folder Options (click the , show hidden files,, and then choose ,, Show hidden files, folders,, and Apply)
    2 Go to C:\Users\, here you should choose your profile name, in my case it ,, jeka,, \AppData\Local\temp\TC20020600B.temp\ Here you should see TVAP folder, remove it completely
    3 Run the ,,regedit,, that found in Windows folder. Choose ,, Edit,, -,,Find,, and type in ,,toshiba value added,, In left Column you will see highlighted folder with value like 8FFFC660FB2109346A37579FE5FF81E8, delete it. restart computer.
    Then, start Tvap exe, it should work now. But you should be careful working with registry, don't delete anything other
    Message was edited by: jeka-israel

  • How to get sound when my laptop is hooked to my tv w/hdmi cable?

    how to get sound when my laptop is hooked to my tv w/hdmi cable?  it's a hd tv and my mac's os 10.6.8
    tried using an external speaker both w/the computer and then the tv, but neither worked......
    Message was edited by: bevmex

    Hi,
    Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
    Next, connect your notebook via HDMI to your Tv.  Right click the speaker icon in the Taskbar and select Playback Devices.  Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I cannot get sound through my laptop speakers ever since I used a digital speaker

    I cannot get sound through my laptop speakers ever since I used an external digital speaker.  Cannot seem to switch back to lap top speakers in my SYSTEM PREFERENCES...only showing DIGITAL out put option

    Hi there Lutostan,
    It sounds like you have disconnected the digital audio speakers from your MacBook Pro but all you have available in your audio settings. Take a look at this info from the following article named:
    Troubleshooting issues with no audio from built-in speakers on Macs
    If the Internal Speakers option does not appear in the Output tab and your computer is not a Mac Pro, check that Digital Out is present as in the image below:
    Confirm again that all external audio devices and cables have been removed.
    Check to see if a red light is lit in the line-out port. If so, your Apple computer may need service.
    If you do not see a red light, proceed to step 5.
    If the issues persist, contact Apple support for further troubleshooting assistance.
    Learn more
    You can obtain service (if needed) through an Apple-Authorized Service Provider or Apple Retail Store. If you plan to visit an Apple Retail store please make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Cant hear sound from my laptop

    i cant hear sound coming from laptop. when i try to test the sound it says fail to test tone. i think i have the g4 but i know its the pavilion g series
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59154.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, download and reinstall the Chipset driver on the following link.
    http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52791.exe
    When the Chipset reinstallation has completed, shutdown the notebook, unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I am getting a buzz sound on my laptop whenever playing audio/video after 1 min.

    i am getting a buzz sound on my laptop whenever playing audio/video after 1 min.

    What model laptop is this? Does the issue occur when you use headphones? If you could give me some more details I will be able to give you some more suggestions to resolve the issue.
    Thanks,
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Connecting the sound to my laptop

    i don't have any sound on my laptop how do i get this

    Hello charezy3744,
    Please follow one of these troubleshooting guides, depending on the OS you're running.
    Windows 7:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=us&destPage=document&lc=en&tmp_docn...
    Windows 8:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03257712&cc=us&destPage=document&lc=en&tmp_docn...
    If this does not solve your issue, please let me know your model number.
    In case you do not know your model number, please refer to the following document.
    http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c00033108&...
    Best regards,
    Kyte
    I work on behalf of HP.

  • The sound on my laptop is locked, cant plug in my headphone jack and there is no red light, The laptop is retina display and I am on panic mode?

    The sound on my laptop is locked, cant plug in my headphone jack and there is no red light, The laptop is retina display and I am on panic mode.
    I have researched the whole subject and the closest thing to my case is one with a red light. I tried the toothpic manoevre suggested by pany with no results. Please help me.

    System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • After attaching the headset to the audio jack, i get sound from the laptop speaker

    after attaching the headset to the audio jack, i get sound from the laptop speaker

    This worked for me as well. Great find! I have gigabyte ep45-ud3r motherboard and I was getting all sound through external speakers except itunes was playing the sound out of the digital output instead of the speakers. I could see this when I went to control panel > hardware & sound > manage audio devices. I did the repair as described above and now I have sound in iTunes.

  • I am not getting any sound from my laptop. I have a Pavilion dv7 with beats audio.

    I am not getting any sound from my laptop.

    Try a hard reset.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    `````````````````````````````
    If still no sound,
    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & install the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I am not getting any sound on my Laptop I looked at all the sound settings nothing is on Mute.

    Is ther a setting that i am missing why I am not getting any sound from my Laptop

    I have an HP with corei5 and windows 7 home.  The subject describes my problem.  No sound.

  • I hear buzzz type sounding from my laptop. What is wrong with it?

    I hear buzzz type sounding from my laptop. What is wrong with it?

    I have the same problem with my 5th-generation iPod! In addition to the red-slashed circle, my iPod will not show up in iTunes nor will it charge until I forcefully eject it and reset it.
    Here is how I have learned to "fix" this problem over the years: make sure your iPod is fully charged before you try to plug it into your computer. The red-slashed circle comes on initially but you'll see that there's activity going on pretty quickly. The key seems to be having the iPod completely charged; even the slightest bit of depletion of battery makes everything go wrong.
    If this fails, make sure iTunes is already open before you plug in your fully charged iPod. Finally, if this fails as well, disconnect your internet connection, have iTunes open, and then plug in your fully charged iPod. These last ideas are probably more placebo than truly useful, but I have had luck with them when I'm ready to throw my iPod and laptop out the window.
    Hope this helps.

  • I can not hear any sound on my laptop .

    i can not hear any sound on my laptop .pls help but i can see icon of sound and i already reinstall its hp pavilion dv6

    HI. =)
    All you have to do is update your sound/audio driver. (especialy if you just got a BIOS update, if you haven't, just proceed)
    first, make sure  nothin's attached to your laptop.
    go to hp.com -> support & drivers -  drivers & software -  (put in your product name/number - you can find that at the bottom of your laptop) -  at the drop down, select widows 64 bit (mostly)  then hit next - at step 2, 'SELECT A DOWNLOAD', choose driver - audio - click the first blue link and hit save - after saving, your laptop will prompt you to run it. hit run.
    then your laptop will reset, and it should produce sound.
    **your kudos will be appreciated.

  • There is no sound on my laptop. HP Pavilion

    There is no sound on my laptop. HP Pavilion S/N CND8502S1F AND P/N NB231UA#ABA....PLEASE HELP ME. Thanks
    This question was solved.
    View Solution.

    Hi
    Please find the link given below might help you to resolve your issue.
    Resolving No Sound or Audio Problems in Vista
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • I can't ncrease the sound on my laptop, the button seems to be ether stuck or not connecting

     have tried to ncrease the sound on my laptop, when I bought the laptop  was able to inccrease and decrase the volume.  however, this last week I have been unable to do so, the button seems either to be stuck or it is not connecctong to the component inside to increase volume, as  watch tv and films on the laptop this nadequacy has become an issue, is there something  I can do myself?

    If both the Mac Pro and the G4 Power Mac are unable to access this particular website, the issue is most likely with the Actiontec, which is a combination modem & router, and not either Macs.
    Sometimes just a simple power recycle of your networking hardware will resolve the problem.
    I would recommend that you do the following as a minimum:
    Power-down the Actiontec and computers.
    Power-up the Actiontec; wait at least 10-15 minutes.
    Power-up your computer(s).
    Both Macs should now be able to access web sites on the Internet. I just tested it myself and had no issues connecting so it's definately not a configuration issue with your Macs.

  • Trying to connect a Belkin brand audio cable from my MacBook Pro to a Sony flatscreen TV. Cannot get any sound from the laptop out of the TV. What am I doing wrong?

    I'm trying to connect a Belkin brand stereo audio cable from my MacBook Pro to a Sony flatscreen TV (Apple "genius" handed me the cable to purchase.)  I have tried all the ports in the back of the Sony, and tried the volume on both the cable and TV remotes. I cannot get sound out of the Sony from my MacBook Pro laptop. What am I doing wrong???

    Downloaded your operating manual.  It appears that you need to connect the HDMI to HDMI 1 and the audio to the input socket just to the right of the VGA socket (i.e., between the VGA and the RF input connection).  The picture on page13 seems to be the clearest I could find:
    Although it's not exactly clear I think they are talking about a standard 3.5 mm (1/8") stereo jack for the audio inpu as opposed to the more common RCA jacks used in the row just above that VGA input socket.
    I haven't checked the manual as yet whether you need to set anything special with the controls other than input select.
    Note, if that truly is a 3.5 mm stereo jack cables are very common.  In your case it would just be a cable with a 3.5 mm jack on each end.
    Update:
    You will have to experiment with this but I think you will need to try pusing the input button to select either HDMI1 or PC (or Component?).  The manual is not clear on this (page 31).  Sometimes it just comes down to pushing buttons.

Maybe you are looking for

  • OBIEE  Detail record with all the columns not showing up in drill down

    Hi When i drill down in the hierarchy it only shows me the key rather than the full detail record M heirarchy is Dim total reckey detail detailkey name type When i drill down on reckey, it shows only the detailkey and not oher columns. Is there somet

  • HT1495 How do I authorize my computer to play songs in my itunes?

    I am trying to play songs on my computer that I have downloaded and when I try to play them it says you must authorize this computer.  How do I authorize my computer to play all of my music in itunes? Jennifer Symons

  • ALSB [2.6] Asynchronous Proxies Coupled

    Hi, I'm trying to implement an asynchronous architecture using ALSB. There are 3 proxies: A, B & C. Proxy A is invoked synchronously by Client and sends back and Acknowledgement. Proxy A routes to Proxy B which is a JMS Proxy. Proxy B routes to Proxy

  • Expdp data without storage meta_data

    Hi, I'm working on a process to move database 10.2 from HP-UX with filesystem to Exadata 11.2 with ASM. We have limited room for downtime on the database and would like to start on Exadata as fresh as possible. I've just started with writing this pro

  • SUN VIRTUAL BOX NETWORK CONECTION ISSUE

    Hai frnds, i have installed redhat linux in sun virtual box server and my host machine is windows where i have installed ssh clit.my aim is to access the redhat linux in sun virtual box from my ssh client installed in my windows. when i installed sun