No sound in my mac after installed osx maverick 10.9

I installed the os X maverick and now i dont have sound,the only sound is the "chan" when its start at the beginning,so the hardware works fine,i tried with reset the pram etc and nothing work...could be something with the drivers maybe? help me please btw i have a macbook white 13 inch-mid2009

I have exactly the same with my late 2009 mac, no sound since upgrade, also alot of freezing happening, are Apple going to bring out a fix or is there a way i can go back onto Mountain Lion because ever since the MAvericks upgrade my computer is very non responsive and slow, and the no sound is becomming a big issue!

Similar Messages

  • HT6114 I cannot log in to my AOL after installing OSX Mavericks

    Why can I cannot log into to my AOL account after installing OSX Mavericks?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Mac Pro Mid 2010 keeps restarting after installing OSX Mavericks

    Hello,
    my Mac Pro Mid 2010 started quitting and restarting after installing the Mavericks OSX. I was thinking about wiping out the drive and reinstalling OS X Mountain Lion but thought I should see if anyone else is experiencing these issues before going that route.
    It just intermittently restarts and it tries to restart multiple times before it will actually start up again. It's not issuing a crash report. It just quits out and restarts. It started doing this just at initial startup. It now will quit and restart at any given time and it will take multiple times attempting to start before it actually starts up. I've even had to shut it down because it would going through that startup sequence without starting. No perceivable pattern as to why this is occurring. No specific programs that it occurs in. The only thing I know for certain is that it started happening after installing Mavericks OSX – OSX Mountain Lion was fine. I also made sure to unistall Mountain Lion before installing Mavericks with those potential issues of trying to install one operating system over another. Any thoughts would be appreciated.
    Specs for Mac Pro Mid 2010:
    - 2 x 2.66 GHz 6-Core Intel Xeon
    - 14 GB 1333 MHz DDR3 ECC
    - ATI Radeon HD 5770 1024 MB
    - OS X 10.9.2

    Hello Linc,
    I followed your instructions. I have information for the BOOT_TIME and for SYSTEM DIAGNOSTICS sections. I've included all within one post with heading separators between the two sections. I wasn't sure if you needed this posted as two separate posts or not. If this isn't correct, please let me know and I'll do again. Hopefully I didn't pull too much content for the BOOT_TIME section. I was trying to search for enough diverse content that would clearly represent what might be occurring. It was also challenging to choose content for the BOOT_TIME section though because there was no time-stamped content close to the time of BOOT_TIME time stamp. The last time I restarted my system was hours before I attempted your exercise. And, I haven't experienced "crashing"  more than it just automatically restarts in the middle of things. I wonder if that's why there were no .crash reports? There was only a list of .panic reports so that's what I provided. Thanks for your help Linc.
    STEP 1 - BOOT_TIME:
    8/12/14 1:58:29.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
    8/12/14 1:58:46.987 PM WindowServer[104]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/12/14 1:58:54.698 PM DMProxy[194]: CGSServiceForDisplayNumber: Invalid display 0x2b2840d0
    8/12/14 2:00:51.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
    8/12/14 2:00:51.000 PM kernel[0]: *** kernel exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    8/12/14 2:01:04.666 PM WindowServer[120]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/12/14 2:01:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=254[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
    8/12/14 2:01:13.811 PM WiFiKeychainProxy[237]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
    8/12/14 2:01:20.859 PM NotificationCenter[243]: Failed to mmap file. The file has zero length.
    8/12/14 2:01:23.997 PM com.apple.audio.DriverHelper[279]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
    8/12/14 2:01:27.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
    8/12/14 2:15:33.763 PM quicklookd[2724]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:16 scale: 1
    8/12/14 2:15:39.000 PM kernel[0]: Sandbox: coreaudiod(264) deny file-read-metadata /Library/Audio/Plug-Ins/Components/UVIWorkstationAU.component
    8/12/14 2:42:17.839 PM QuickLookUIHelper[2874]: *** Throwing exception err=-536870174 type=3 PlugInDevice.cpp line 81
    8/12/14 2:42:17.851 PM sandboxd[145]: ([2874]) QuickLookUIHelpe(2874) deny iokit-open com_motu_driver_PCIAudio_UC
    8/12/14 2:53:26.000 PM kernel[0]: firefox (map: 0xffffff803dc844b0) triggered DYLD shared region unnest for map: 0xffffff803dc844b0, region 0x7fff91200000->0x7fff91400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    8/12/14 2:55:19.376 PM plugin-container[2917]: Just logged in, send prefs down to 0 drivers
    8/12/14 2:55:19.376 PM plugin-container[2917]: Adding ConsoleUID 501 to dictionary
    8/12/14 2:55:21.182 PM plugin-container[2917]: CoreText performance note: Client called CTFontCreateWithName() using name "Myriad Pro" and got font with PostScript name "MyriadPro-Regular". For best performance, only use PostScript names when calling this API.
    8/12/14 2:55:32.503 PM com.apple.launchd.peruser.501[200]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 10 seconds
    8/12/14 2:55:32.960 PM plugin-container[2917]: PlugInDevice::~PlugInDevice
    8/12/14 2:55:33.790 PM WindowServer[120]: CGXGetConnectionProperty: Invalid connection 63027
    8/12/14 2:55:33.807 PM com.apple.launchd[1]: (com.apple.MailServiceAgent[2714]) Exited: Killed: 9
    8/12/14 2:55:33.812 PM loginwindow[80]: ERROR | -[Application setAppContext:] | Unable to get PID for context [0,118813]
    8/12/14 2:55:33.814 PM com.apple.launchd[1]: (com.apple.ShareKitHelper[282]) Exited: Killed: 9
    8/12/14 2:55:33.816 PM com.apple.launchd.peruser.501[200]: ([0x0-0x27027].com.apple.AppleSpell[2673]) Exited: Killed: 9
    8/12/14 2:55:33.886 PM Core Sync[373]: NSDistantObject (0x1088026a0) is invalid (no connection)
    8/12/14 2:55:34.305 PM sessionlogoutd[2929]: sessionlogoutd Launched
    8/12/14 2:55:34.314 PM sessionlogoutd[2929]: DEAD_PROCESS: 80 console
    8/12/14 2:55:34.335 PM fseventsd[86]: Events arrived for /Volumes/Mac OS X Install ESD after an unmount request! Re-initializing.
    8/12/14 2:55:34.335 PM fseventsd[86]: creating a dls for /Volumes/Mac OS X Install ESD but it already has one...
    8/12/14 2:55:34.612 PM shutdown[2930]: halt by _coreaudiod:
    8/12/14 2:55:34.000 PM kernel[0]: Kext loading now disabled.
    8/12/14 2:55:34.000 PM kernel[0]: Kext unloading now disabled.
    8/12/14 2:55:34.000 PM kernel[0]: Kext autounloading now disabled.
    8/12/14 2:55:34.000 PM kernel[0]: Kernel requests now disabled.
    8/12/14 2:55:34.612 PM shutdown[2930]: SHUTDOWN_TIME: 1407880534 611700
    8/12/14 2:55:34.625 PM Creative Cloud[252]: XPC error messaging com.apple.IconServicesAgent: Connection invalid
    8/12/14 7:30:33.000 PM bootlog[0]: BOOT_TIME 1407897033 0
    STEP 2 - SYSTEM DIAGNOSTIC REPORT:
    Tue Aug 12 19:30:48 2014
    panic(cpu 0 caller 0xffffff801f8dc24e): Kernel trap at 0xffffff801fc51e48, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff803f930ec0, CR3: 0x0000000022630000, CR4: 0x00000000000206e0
    RAX: 0xffffff803ebc9f80, RBX: 0x0000000000000070, RCX: 0xffffff801ff034d0, RDX: 0xffffff803f915588
    RSP: 0xffffff81c98d3c10, RBP: 0xffffff81c98d3c40, RSI: 0x0000000000010002, RDI: 0x0000000000000001
    R8:  0x0000000000000000, R9:  0x0000000000000039, R10: 0xffffff801ff03770, R11: 0x0000007e3672c41b
    R12: 0xffffff801ff034d0, R13: 0xffffff803f8dc2c0, R14: 0xffffff803f915580, R15: 0xffffff803f930ec0
    RFL: 0x0000000000010286, RIP: 0xffffff801fc51e48, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffff803f930ec0, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81c98d38a0 : 0xffffff801f822f79
    0xffffff81c98d3920 : 0xffffff801f8dc24e
    0xffffff81c98d3af0 : 0xffffff801f8f3746
    0xffffff81c98d3b10 : 0xffffff801fc51e48
    0xffffff81c98d3c40 : 0xffffff801fc8bffe
    0xffffff81c98d3c80 : 0xffffff801fc8c1fd
    0xffffff81c98d3cb0 : 0xffffff7fa01e49aa
    0xffffff81c98d3ce0 : 0xffffff7fa01e48dc
    0xffffff81c98d3d10 : 0xffffff7fa0144068
    0xffffff81c98d3d70 : 0xffffff7fa0142c85
    0xffffff81c98d3da0 : 0xffffff7fa0141646
    0xffffff81c98d3dd0 : 0xffffff7fa01bfc43
    0xffffff81c98d3e20 : 0xffffff7fa0140b8b
    0xffffff81c98d3e50 : 0xffffff801fc956ef
    0xffffff81c98d3ea0 : 0xffffff801fc952af
    0xffffff81c98d3f30 : 0xffffff801fc90e89
    0xffffff81c98d3f70 : 0xffffff801fc95e03
    0xffffff81c98d3fb0 : 0xffffff801f8d7417
          Kernel Extensions in backtrace:
             com.apple.iokit.IOAudioFamily(1.9.7f2)[092DA230-DD20-3369-A32B-E162A496C638]@0x ffffff7fa013d000->0xffffff7fa016bfff
                dependency: com.apple.kext.OSvKernDSPLib(1.14)[7C60EDB3-7527-3412-B424-C9A667A65B92]@0xffff ff7fa012b000
             com.motu.driver.PCIAudio(1.6)[00000000-0000-0000-0000-000000000000]@0xffffff7fa 01be000->0xffffff7fa0223fff
                dependency: com.apple.iokit.IOAudioFamily(1.9.7fc2)[092DA230-DD20-3369-A32B-E162A496C638]@0 xffffff7fa013d000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9febe000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
    Kernel slide:     0x000000001f600000
    Kernel text base: 0xffffff801f800000
    System model name: MacPro5,1 (Mac-F221BEC8)
    System uptime in nanoseconds: 26153387208
    last loaded kext at 18269508545: com.apple.driver.AppleMikeyHIDDriver    124 (addr 0xffffff7fa10fa000, size 20480)
    loaded kexts:
    com.Cycling74.driver.Soundflower    1.5.1
    com.motu.driver.PCIAudio    1.6 58373
    com.apple.driver.AppleMikeyHIDDriver    124
    com.apple.driver.AppleMikeyDriver    2.6.3f4
    com.apple.driver.AppleHDAHardwareConfigDriver    2.6.3f4
    com.apple.driver.AppleHDA    2.6.3f4
    com.apple.driver.AudioAUUC    1.60
    com.apple.driver.AppleUpstreamUserClient    3.5.13
    com.apple.driver.AppleMCCSControl    1.2.5
    com.apple.kext.AMDFramebuffer    1.2.4
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothUSBDFU    4.2.6f1
    com.apple.AMDRadeonX3000    1.2.4
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.6f1
    com.apple.driver.AppleHWAccess    1
    com.apple.driver.AppleLPC    1.7.0
    com.apple.kext.AMD5000Controller    1.2.4
    com.apple.driver.AppleIntelMCEReporter    104
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.6.0
    com.apple.iokit.SCSITaskUserClient    3.6.6
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    35
    com.apple.driver.AppleUSBHub    683.4.0
    com.apple.driver.AppleFWOHCI    5.0.2
    com.apple.driver.Intel82574L    2.6.2b1
    com.apple.driver.AirPort.Brcm4331    700.20.22
    com.apple.driver.AppleAHCIPort    3.0.5
    com.apple.driver.AppleUSBEHCI    660.4.0
    com.apple.driver.AppleUSBUHCI    656.4.1
    com.apple.driver.AppleRTC    2.0
    com.apple.driver.AppleHPET    1.8
    com.apple.driver.AppleACPIButtons    2.0
    com.apple.driver.AppleSMBIOS    2.1
    com.apple.driver.AppleACPIEC    2.0
    com.apple.driver.AppleAPIC    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
    com.apple.nke.applicationfirewall    153
    com.apple.security.quarantine    3
    com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
    com.apple.driver.DspFuncLib    2.6.3f4
    com.apple.vecLib.kext    1.0.0
    com.apple.iokit.IOSurface    91.1
    com.apple.iokit.IONDRVSupport    2.4.1
    com.apple.iokit.IOBluetoothFamily    4.2.6f1
    com.apple.iokit.IOAcceleratorFamily    98.22
    com.apple.driver.AppleSMBusController    1.0.12d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.6f1
    com.apple.driver.AppleHDAController    2.6.3f4
    com.apple.iokit.IOHDAFamily    2.6.3f4
    com.apple.iokit.IOFireWireIP    2.2.6
    com.apple.driver.AppleSMBusPCI    1.0.12d1
    com.apple.iokit.IOAudioFamily    1.9.7fc2
    com.apple.kext.OSvKernDSPLib    1.14
    com.apple.kext.AMDSupport    1.2.4
    com.apple.AppleGraphicsDeviceControl    3.6.22
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.driver.AppleSMC    3.1.8
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.driver.IOPlatformPluginFamily    5.7.1d6
    com.apple.driver.AppleUSBHIDKeyboard    170.15
    com.apple.driver.AppleHIDKeyboard    170.15
    com.apple.iokit.IOUSBHIDDriver    660.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.6
    com.apple.iokit.IOUSBMassStorageClass    3.6.0
    com.apple.driver.AppleUSBMergeNub    650.4.0
    com.apple.driver.AppleUSBComposite    656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.6
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.6
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IOUSBUserClient    660.4.2
    com.apple.iokit.IO80211Family    640.36
    com.apple.iokit.IONetworkingFamily    3.2
    com.apple.iokit.IOAHCIFamily    2.6.5
    com.apple.iokit.IOUSBFamily    683.4.0
    com.apple.driver.AppleEFINVRAM    2.0
    com.apple.driver.AppleEFIRuntime    2.0
    com.apple.iokit.IOHIDFamily    2.0.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    278.11.1
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.AppleKeyStore    2
    com.apple.driver.DiskImages    371.1
    com.apple.iokit.IOStorageFamily    1.9
    com.apple.iokit.IOReportFamily    23
    com.apple.driver.AppleFDEKeyStore    28.30
    com.apple.driver.AppleACPIPlatform    2.0
    com.apple.iokit.IOPCIFamily    2.9
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    com.apple.kec.pthread    1

  • Error in finder after install osx mavericks

    error in finder after install osx mavericks

    I have a similar problem but the error code that keeps coming up is -600 please help !

  • After installing osx mavericks my macbook pro restarts all the time

    after i installed osx mavericks my mackbook pro always restarts again and again
    can someone help me?

    I have the same problem with my 2012 imac.
    Maverick is working great on two macbook airs but the imac crashs multiple times a day. It's killing me as it's our workhorse.

  • Is anyone having trouble opening CS5 products (PS, AI, & In) after installing OSX Mavericks?

    I just installed OSX Mavericks and now cannot open CS5 Ps, Ai, or In.  I haven't found any information about known issues or any updates that should solve the problem. Your help is greatly appreciated, thank you.

    As it turns out, it was necessary to upgrade Java Runtime in order to open the applications.  It seems to be an issue with OSX rather than Creative Suite; the only dialogue to that effect appeared when I shut down the machine.  I haven't figured out why it didn't appear until then, but once it did it was simple to get the upgrade done and Voilá!

  • I lost the sound after install osx maverick

    help me please i dont know what to do...i just installed the osx maverick 10.9 and the sound gone..i check all and its ok...all i can hear is the "chan" at the beginning  ,the music plays ok but i cant hear on speakers headphones etc..its seem that some people had the same issue

    Do you have a 2nd or 3rd Gen AppleTV on your network? Perhaps the output source was switched during the update. Go to System Preference--->Sound----->output
    Check this thread out for a solution https://discussions.apple.com/thread/4137391?tstart=60 (solution: reboot)

  • HELP- After installing OSX Maverick, Microsoft Office is having problems!

    I recently updated my computer to the new opperating system OSX Maverick. After doing so when I tried to open microsoft word it asked me to sign into my microsoft account to re-initiate it. Ive tried many different times, on many different days each time with the same error message "we could not reach your account, please check your internet connection and try again later". I have tried re-starting my computer along with many other things, I have also gone online and signed into my microsoft account, therefore I know the information I used to attempt to log in is correct. Is this a possible compatibility problem between Maverick and Office or is it simply a problem with Microsoft at this time. I have the Mac 2011 home office 365 currectly installed on my computer.

    It must be the Office 365 link acting up. You might want to try disabling it if Office 2011 is your main tool.
    Phil

  • Most of my apps cant open and finder cant respond after installing osx mavericks

    Hi, ever since i installed the released (to the public) version of osx mavericks, all **** has broken loose!! First, my finder is not responding. 2. all folders and files on the desktop have dissappeared. 3. most of my applications cant open: i.e, Mail, iMessage, Maps, iPhoto, Calendar, Reminders. 4. The ram in use is 3.99 yet my macbook air is only 4 gb ram.
    ADDITIONAL INFORMATION:
    Im using a macbook air (mid 2013). 1.3 ghz, 256 gb, 4gb RAM. I have about 160 gb of free space.
    Please help!! What can I do?

    Hi,
    Try a Safe Boot
    10:09 pm      Wednesday; October 23, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Launchpad installation frozen after installing OSX Mavericks. One small blue dot on progress bar?

    Downoladed new OSX Mavericks . New Safari OK. Launchapd still shows dowlad in progress on OSX after hours??  Why wont it finish download? 

    I just had this same thing happen to me. My rMBP was kernel panicking, giving random error messages, freezing, and all sorts of other unrelated things. Took it to my local apple store (Authorized Service center, not Apple-owned) and after many tests passing, they couldn't figure it out. I told them that when I hit the bottom of the laptop a few times it would boot up. It hung on a gray screen for awhile, and hitting the bottom caused it to boot up immediately.
    I then proceeded to tell the person that the SSD is likely loose. What did not make sense is that during the hardware tests the drive was recognized and passed with flying colors. Upon reboot, nowhere to be found. Long story short, the tech eventually decided to give an SSD reseat a try and what do you know- booted up the first time, no problems, no errors. Didn't cost me anything.
    I also had other random things happen, such as WiFi needing disabled/enabled each time the computer woke from sleep or was turned on, graphical glitches, and so forth. Although none of those things are SSD related, they are fixed. Maybe the diags were what fixed those, not entirely sure. It appears to work as good as new. Now I don't need to do an OS reinstall. Yay.

  • Itunes not launching on mac after installing osx lion

    Hi there, can any1 help me out with this problem, stayed up all night tryna figure out the problem but nothing, and it sends me this error message:
    Process:         iTunes [690]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         10.5.3 (10.5.3)
    Build Info:      iTunes-10530301~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [186]
    Date/Time:       2012-02-03 04:15:49.956 +0000
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          4744 sec
    Crashes Since Last Report:           10
    Per-App Crashes Since Last Report:   8
    Anonymous UUID:                      21117C7F-340F-4E8B-B434-BE991642F24B
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
           0x1012f5000 -        0x10237ffef  com.apple.iTunes (10.5.3 - 10.5.3) <F2A947DF-4408-401C-43EF-340F966C91CC> /Applications/iTunes.app/Contents/MacOS/iTunes
        0x7fff60ef5000 -     0x7fff60f2a1ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    Model: MacBook5,1, BootROM MB51.007D.B03, 2 processors, Intel Core 2 Duo, 2 GHz, 2 GB, SMC 1.40f2
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313132533641465236432D47372020
    Memory Module: BANK 0/DIMM1, 1 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313132533641465236432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 5.100.198.11 )
    Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHZ2160BH FFS G1, 160.04 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS21N
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0x04600000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 3

    Since switching to OS Lion same problem as you.
    I made the following method:
    - deselected the "Load External Subtitles" option in Perian's preference pane.
    Don't work proced :
    - Uninstall Flip for Mac.
    - Restart the machine.
    - Uninstall Perian.
    - Restart the machine.
    - uninstall the Divx codec.
    - Restart the machine.
    - Only install Perian and restart it should work with me finally it works now.
    - same to Flip for Mac and restart.
    - deselected the "Load External Subtitles" option in Perian's preference pane.
    Phil

  • InDesign CS6 won't package fonts or package anything after installing OSx mavericks - Client is waiting

    Pre-Mavericks I had zero problems packaging my INDD files in Adobe InDesign CS6 with all fonts and links intact. Now, when I go to package the same files I successfully packaged last year under Lion, InDesign tells me the fonts can't be packaged (and doesn't package anything else either). My client is becoming very frustrated so I would really appreciate some help from Adobe in solving this problem as soon as possible.

    Thank you Willi for responding.
    Which fonts are affected? - I'm assuming all of the fonts are affected since no fonts are able to be packaged.
    Are all used fonts installed? - Yes
    Did you have your fonts in a Document Fonts folder beside your old file and saved your new document on a different place? - Before I upgraded to Mavericks I was able to package everything for this exact same file so I do have fonts in the packaged folder (referring to my 2013 file) so even though the fonts aren't in a Documents folder (they are inside the package "Fonts" folder) so I think the answer to your question is yes.
    Does your font folder have the same permession as the folder before? - I believe so because I never changed the permissions for the fonts
    Do you use CS6 as part of the Creative Cloud and are you using TypeKit fonts? Or are you using the boxed version? - I am trying to avoid using Creative Cloud since I already have CS6 that I have already paid for. What I am reading on the internet, however, is that Adobe is forcing people to move over to CC when they upgrade to Mavericks due to problems like I am having now. I am not sure if this is true/untrue but I am definitely concerned. I can not afford right now to start paying a monthly fee (especially after I have already paid for CS6). I am using a boxed version of CS6 and I am not using TypeKit fonts.

  • Revert back after installing OSX Mavericks

    I would like to know how to revert back to my previous operating system after using OS X Mavericks for several months.  I have no need of iCloud or the other advanced communications benefits and they keep interfering with how I use the iMac.  Thanks

    If you cloned the hard drive before upgrading, just restore that clone. If you did not, then you will have to back up all your data, erase the hard drive, and reinstall the OS and your applications and then restore your data. If you look under "More Like This" at the right, you should find further information.
    Regards.

  • Mouse does not swipe after installing osx mavericks

    I just installed Mavericks and my mouse swipe does not work for Safari and iphoto. Can anyone help?

    Go to SYSTEM PREFERENCES - MOUSE - MORE GESTURES
    Once there enable SWIPE BETEWEEN PAGES
    For some reason the upgrade unchecked this for me
    Easy fix
    Hope this helps

  • After installing OsX Maverick, OsX Mountain Lion is appearing in the Applications folder.

    Is there a purpose behind having this icon in my applications folder? I have tried opening and running it, but there is no application that can run it. Does anyone else have this issue or know if there is a bug behind it?

    Do NOT delete it. Use it to make a Mountain Lion flash drive installer. You should have done that with Mavericks. This is an easy way to reinstall should you need to without using a long waste of time downloading.
    Mende1 is OK with his suggestion, but IMHO I'd keep it. At least until you are convinced you won't need it for anything. I like to save mine until I know I'm happy with the upgrade.

Maybe you are looking for