No Sound in Omnispehere & Trillian after the last update in Logic 8

Hi,
I'm on Leopard 10.5.8 and Logic 8,
After install of both Omnisphere and Trillian, I have no sound on both plug-ins.
I have everything on my internal HD, installed to the same path like previous updates.
Updates:
Omnisphere; Software 1.2.0n
Patch Library 1.2.0
then Library 1.0.2
Trillian:
Software 1.2.0n
Patch Library 1.2.0
Library 1.0.1
Did any of you experience the same?
Does anyone has a clue what can cause this sound mute?
Kind regards,
Jorge
Ps: I thought it was a 64 bit issue,
but Logic 8 and Leopard are 32bit,
only Logic 9 and Snow Leopard are 64 Bit

Hi Regina,
Thanks for sharing, I can hear the sounds loaded from the patch browser with the preview button only,
the only channel that my keyboard triggs sound is Channel 1 Only, any other channel nope ( I'm loading in stereo). I try to reset it to all or any other channel with no luck ( you had ; ) .
Anyway if if load the top browser from default to any preset (in live or stack mode) everything is fine on all channels go figure? On my first try, I've got some nasty distorted sound, then quit and restart Logic and the distorted issue was clear.
I'm in touch with the spectra support team, as soon as they give me some more clues I'll keep you posted ok?
Thanks a lot for your tips.
Cheers,
Jorge

Similar Messages

After the last update of logic x my record button disappeared while using M-Audio

Hello,
I've been using Logic for ages and recorded many demo tracks with M-Audio Fast Track Pro. Recently, I updated the Logic Pro X and after that I realised that the record button in Logic Pro X disappeared even though the Fast Track Pro is plucked in in the same way as before.
I can hear the sound from the plucked mic or guitar but unable to record it.
Thank you for any help.

Update:
For some currently unknown reason, 10.0.5 seems to break M-Audio devices....
It may be M-Audio's fault or Logic's but at this time, it's hard to say until an explanation is forthcoming....
Please contact M-Audio and ask for their assistance....
Until a fix is available, the workaround is to roll back to 10.0.4.... assuming of course, you have backups which you should always make before upgrading/updating anything......

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage of memory storage space
Osmhto tried to solve the problem of low sound we have become we do not hear a tone sounds clearly like the first phone

hello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end?

Apple tv3 runs slowly on all apps in the box,after the last update.Picture sometimes runs slowly on netflix ,and all the apps in the apple tv3 box.But the sound is ok.Anyone else have this problem?

Apple tv3 runs slowly on all apps in the box,after the last update.Picture sometimes run's slowly on netflix ,and all the apps in the apple tv3 box.But the sound is ok.Anyone else have this problem?I have a 20Mbit wireless line,but i had put a cable from my router to my apple box,but it did not help.

Are you using a home network?
Try the following :
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings

HT1926 Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix

Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix?

Hi Richmoller51,
Welcome to Apple Support Communities.
See this article for some troubleshooting steps that can help with video playback in iTunes or Quicktime:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Best,
Jeremy

Help! No sound after the last update

I have a problem with my ATV3 after the last update, all AIFF audio videos of my iTunes library, have no sound in Airplay mode.
Is it a problem of Apple???

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.

I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

Hi jandroantonio,
Welcome to Apple Support Communities.
It sounds like your iPhone update may not have completed succesfully. Not to worry, we have an article with information on how to treat this symptom:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy

After the last update on Mac os 10.9.2 end of April - I

After the last update on Mac os 10.9.2 end of April - I opened Pagemaker and my whole system crashed after talkign with Apple, I had to erase everything on my hard drive. I finally got it fixed and re-installed pagemaker cs5 and a few other program that I HAD to have while I was on vacation. When I got home, I tried installing CC and various programs (pagemaker, indesign, photoshop etc. Had to erase all of the other adobe programs and start from scratch. Every time I open ANY adobe products all of my "white space" is pink and white vertical striped in EVERY program. Apple mail, contacts etc. If I completely shut down the computer and then restart everything is fine until I open an adobe product again. I can't seem to get any help out of Adobe, does any one have any suggestions before I cancel my subscription entirely?
Thank you in advance,
Janie

You may need to ask for help in the individual program forums
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

Anything known on this issue? Solutions? Even importing files from memory card is a problem.
In import window images are not diplayed as images but all the same blue mini images.
vertical files are changed into landscape positions and more. Mac version.
cj de vries

Op 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
created by Yammer in Bridge General Discussion - View the full discussion
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
THNX Problem solved

I have lost some of my bookshelfs after the last update!

I have lost some of my bookshelfs after the last update and cannot create a new one. How can I fix it? I don't have them on my PC so I can't synchronize them. What can I do? Pretty dissapointed right now!

If the contact were added after the backup was made they will not be in the backup. If your contacts were synced with iCloud they may be there. If so they will apear shortly on your new phone.

After the last update(7.1.2) i couldn't find personal hotspot in my iPad 2.

after the last update(7.1.2) i couldn't find personal hotspot in my iPad 2 Wifi+Cellular. I did everything like reset network setting, restore to factory setting and set up as a new iPad but no change. My iPhone 5's carrier is 16.2 and after update to 7.1.2 it automatically ask me for carrier update but my iPad 2 ask nothing and the carrier is 16.1. Please, help me to solve this problem.

The Personal Hotspot feature is not available on the iPad 2. I have no idea how you could have been using it before as you claim. BTW, your screenshots do not show up.
System requirements
The table below lists the iPhone and iPad (Wi-Fi + Cellular models) capable of Personal Hotspot and which connections they can use to share cellular data with another device:
USB
Bluetooth
Wi-Fi
iPhone 4 or later
✓
✓
✓
iPhone 3GS and iPhone 3G*
✓
✓
iPad (3rd generation or later) Wi-Fi + Cellular
✓
✓
✓
iPad mini Wi-Fi + Cellular
✓
✓
✓
* On iPhone 3G, Personal Hotspot is referred to as Internet tethering.
To connect to a Personal Hotspot, your device requires:
Wi-Fi: Support for 802.11g/n using WPA2 encryption.
USB: Mac or PC with iTunes 9.2 or later installed.
Bluetooth: Mac OS X v10.4.11 or Windows.

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

After the last update is no longer contact to the internet or to whatsapp? What can I do with my iphone 5?

After the last update is no longer contact to the internet or to whatsapp? What can I do with my iphone 5?

No internet access when connected to an available wi-fi network and the same when connected to your carrier's cellular network, or when connected to your carrier's cellular network only?
Any error message provided?

After the last update of itunes I seem to have lost all my music (Cds that I had downloaded into itunes) except the once I had purchased from the itunes store. Can anyone help? Do you know what might have happened?

After the last update of itunes I seem to have lost all the music that I had downloaded from my Cds. It was a lot of music! All I still have is the music that I had purchased in the itunes store. And before you asked. No, I did not have a backup. Never got around to do it.
Does anyone of you have an idea if and how I can maybe get my music back?
Your help is very much appreciated. Would it help if I recover my computer from an earlier date?? I am not even sure if I make sense here.

Hi - I seem to have a similar problem. I was prompted to update to iPhoto 11 yesterday (don't know why yesterday, I'm in iPhoto all the time). So I followed the instructions, library updated, all existing events and albums are there. I uploaded some more pictures and created a few new albums and did some new year spring cleaning, moving stuff around etc. And I started making a calendar.
I've opened it up today, my calendar is still there as are all the new events, but the pictures are empty outlines. If I open up a picture I just get the "!" but I can still see the thumbnails showing in the slider in the bottom - I don't know if that means the source files must still be there somewhere, or if it just means it captured thumbnails yesterday.
I've gone into it via "show package contents" and there just don't seem to be any masters for an upload yesterday. I also just had a look in the last import folder, because of a comment from someone above. As I scrolled down through the folder the images were there and literally disappeared in front of me - by which I mean, the thumbnails were there as I scrolled down and then would turn into empty outlines...!
All my old folders are still there, thankfully (although they're of course the ones that are also all safely back up).
Although I have a timecapsule, my photo library is too big to keep on my hard drive, so I keep it on an external drive - so it only gets backed up when I do it manually (thanks Apple for that, I will never understand why it was designed to work - or not work - that way). So if the pictures have been lost then they are gone for good which is super-frustrating (I just got back from South Korea and was in the middle of sorting out all my shots from that trip). It seems that this can only have happened because of the update - I should have known better than to have pressed yes.
If you have any ideas, I'd be most grateful!
Regards
R

Why MLB.TV is not appearing after the last update?

why MLB.TV is not appearing after the last update?

Make sure the store is set to the US.. Also restart the ATV.

No Sound in Omnispehere & Trillian after the last update in Logic 8

Similar Messages

Maybe you are looking for