No sound in OSX for Panasonic BL-C131A Network Camera

I successfully installed a Panasonic BL-C131A Network Camera on my network and can view it on my iPhone or over an internet connection in Safari or Firefox. The only trouble is that I cannot hear the sound output while streaming video from the camera on my iPhone or a compatible OSX browser. The cameras sound codec is apparently not supported in OSX. I have Windows XP running on an iMac using Bootcamp and the sound comes through loud and clear in IE. Is this a problem on Panasonic's end or is it just that Apple refuses to support this product? This would be a really cool camera were it not for the lack of audio on my iPhone and Safari. This is a wireless network camera and can be placed anywhere to remotely monitor my home. it can be remotely tilted, up and down, and left and right and zoomed in and out. But the sound just does not work in OSX! Any suggestions?

The cameras are designed around Microsoft and Internet Explorer. You will not get audio, MPEG-4 video and audible alerts with Firefox and Safari.
In addition, this affects phone viewing. Different phones use different and sometimes proprietary browsers. Not all can view the actual camera page from their phone like the iPhone which uses Safari.
There is a /mobile that can be added to the end of your Viewnetcam.com address and even then depending on the browser software - that may not work. With this one there is no live stream and updating the image is done manually.

Similar Messages

LightRoom Support For Panasonic Lumix DMC-FZ1000 camera/lens

The Panasonic Lumix DMC-FZ1000 has been listed as a supported camera since at least LightRoom 5.6 and the equivalent Adobe Camera Raw version.
I have both LR 5.7 and LR CC2015. In the Develop Module, Lens Correction area, there is no Panasonic camera/lens listed in the drop-down list of Profiled cameras in order to enable profile corrections.
LR does display the Panasonic RAW files without having to convert to another format, but can't apply lens-specific corrections due to its non-listing in that area.
Why is it not listed and can I get it listed somehow?

I have both LR 5.7 and LR CC2015. In the Develop Module, Lens Correction area, there is no Panasonic camera/lens listed in the drop-down list of Profiled cameras in order to enable profile corrections.
That's probably correct. The lenses from many cameras are not profiled by Adobe. It may be (I'm not sure about your camera) that the lens corrections are already applied by the camera, and so no additional corrections are needed in Lightroom.

Which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

I totally understand.
Check some things from here, I have 2 and they have been great so far.
Check here, lots of storage and reasonable prices. Also great support, you get to speak to a person
Clean off your on the G5 drive and off you go.
I suggest buying a second drive and setting it up for a back up, Time Machine or Carbon Copy Cloner, or SuperDuper (both "bootable" back up) All searchable on the web.
http://eshop.macsales.com/search/elite+pro
You can talk to a person for REAL advice, Phone: 800.275.4576 Ask about exporting to your G5 and and exporting to your existing OSX, you may only need a small inexpensive drive for this.
Quick delivery and willing to help.
Hope this makes you back up and running :-)
Do get a back up drive, as it is not ""whether my drive will fail, as much as "when my drive fails"
All the best

No sound after OSX 10.6.8 upgrade

No sound after OSX 10.6.8 upgrade

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

No sound from OSX, fine in Windows 7

I'm having a problem where I am getting no sound from OSX from the internal speakers or headphone jack. Everything is fine in Windows 7 on my bootcamp partition.
Im using OSX 10.9.1 on a Macbook pro retina.
I don't hear the 'pop' noise when changing volume and the output is set to internal speakers.
Strange thing is the first time I play a track from itunes or a video from youtube, i get about 0.5s of audio but then it cuts out.
Update:
Getting this in the console.
23/12/2013 15:20:35.000 kernel[0]: Sound assertion - 8086:1e20 FIFO error (Stream 4)

Hi roboguy123,
Thanks for visiting Apple Support Communities.
I'd recommend starting with the troubleshooting steps in this article if you do not hear sound from the internal speakers on your MacBook Pro:
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Regards,
Jeremy

FIRMWARE UPDATE FOR PANASONIC 110D

I'm currently running a Panasonic 110D with Patchburn software. The firmware version is 1.39. I know that there has been an upgrade. Do I have to remove the drive and pop it into a windows machine or is there a mac version of the flashing software available.
Thanks,
Bruce

From the model and firmware numbers, it's probably a Pioneer, not Panasonic. You can update firmware in OSX for this model using DVRFlash
<http://lasvegas.rpc1.org>
You can get the Pioneer DVD-RW DVR-110D 1.41 firmware from
<http://tdb.rpc1.org>

I recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

Check this thread out -> iTunes 10.4 & Multimedia Keyboard
It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
pikot wrote:
Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
- You need to open a text editor (like notepad) as an administrator.
- Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
- Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
- Save the file
- Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)

I bought a movie on iTunes but when I try to watch it plays back slowly with no sound. Then the video will speed up and the sound will work for a moment then off again and back to slow motion. I have a dell laptop running windows 7

The description says it all. I bought a movie on iTunes but when I try to watch it plays back slowly with no sound. Then the video will speed up and the sound will work for a moment then off again and back to slow motion. I have a dell laptop running windows 7

Hi Normanwh,
If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Regards,
- Brenden

How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." Please help it's urgent!

How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." I need to do this in order for Rosetta Stone to recognize my USB Logitech headset. I'm extremely confused. Please, just help.

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
You can also post in your installed os section of the message board.

I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update

Dears at Apple:
I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update on any of my devices(iPhone 4s, iPhone Touch (4th Gen), iPad (3rd Gen). Most of the "Podcasts" I listen to are music content based and wanted to apply sound enhancements(EQ) like before when integrated with ipod function. Can you consider to "fix" this issue?
Many Thanks!

OK Emanuel I found a solution! I dowloaded and installed "Denon Audio" app from the iTunes store & it works great! It has an EQ you can set curves on manually or use the (few) built in pre-sets. It is a player like the Music app that comes with the iPhone, etc. but restores the EQ functionality so we can adjust the audio of PODCASTS:-) Until Apple fixes this what I consider a bug I will be using the Denon app as my default music player!

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps...

Sound not working for text alert just vibrate

Sound not working for text alert just vibrate and no sound on keyboard

I'm having the same problem, it just started today (11/13/2012).
Settings > Sounds> Text Tone = Tri-tone
Lock Sounds = On
Keyboard Clicks = Off
The mute button is also in the correct place (ring, not mute).

Panasonic TV and Skype Camera only send video for ...

I just bought a TCP50ST50 TV and the TY-CC20W camera for Skype. Incoming video is fine. Audio in and out is fine. Sending video lasts for 5 seconds, then the camera turns off. I hit the ok button on the remote and the video starts sending again for about 5-10 seconds, then turns off, hit the ok button, working again. Terrible way to have a video chat between grandparents and grandkids. Please help...

Lots of luck getting your problem fixed. Skype will tell you it is Panasonic'c problem and Panasonic will tell you it is Skype. You have a great deal of company and if anyone knows of a class action suit I would like to know. The error "the far end party cannot receive video" just bounces off the clueless script reading tech support who just answer questions with moronic questions of their own. This has seriously turned me off buying any other Panasonic product for the rest of my life. Can't I get some redress for all the prominent Skype hype on all three products, TC-P50GT30, DMP-BDT310 and TY-CC20W, no small bit of cash when purchased. Crimony

How do I get sound to work for games...?

How do I get sound to work for game apps, when I have sound for other items on ipad2?

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

No camera profiles in development module for Panasonic GH4 rw2 files, imported in Lightroom 5.6.

No camera profiles in development module for Panasonic GH4 rw2 files, imported in Lightroom 5.6.
Only the "Adobe Standard" is shown. In metadata I can see that the camera and lense were recognized correctly. What could be the reason?

The sample GH4 raw file I found on PhotographyBlog does have a lens profile that the Adobe applies automatically without having lens profiles being enabled. This is indicated in Photoshop CC / ACR 8.x so perhaps LR 6 will give us the same indication:
By comparison, here is what the uncorrected raw file looks like in a raw converter that doesn't do lens corrections:

No sound in OSX for Panasonic BL-C131A Network Camera

Similar Messages

Maybe you are looking for