No sound in Premiere Pro with .mts files

Hello,
when i import .mts files in Adobe Premiere Pro. There is no sound, why? I can import other other video files, like .mp4 and there is sound.
Please Help!
Premiere Pro detects the most settings false, it said 25p but i recorded with 50i and 1080i

There is Audio in my files, the files are produced by an Sony Legria HF S10. I can play the sound with vlc Media Player, but in Premiere Pro CS 5, they said in the file is no sound!
Other files, like .mp4 had a little speaker on the clip, but .mts files not!
I used the Adobe Premiere Pro CS 5 German Trial.

Similar Messages

  • Premiere Pro and MTS File Format

    What versions of Adobe Premiere Pro work  with MTS Files?

    Assuming you're asking about the AVCHD format, this was supported in CS4 and up.

  • I am not being able to play sound when I import a .MTS file from my folder

    I am not being able to play sound when I import a .MTS file from my folder on my sequence bar of my Premiere Pro CS6. Even if I use my Media Browser to import the file, the video plays fine, but the audio is disabled it seems. I don't know what to do since I have used .MTS files before without hassle on CS5.5. It is quite frustrating. What can I do?

    Hi debesh05,
    Please mention the Operating System that you are using and also make and model of the Camera that was used to capture those clips. Also, try to make another folder with the same name in the same location where the .MTS files are and move all the clips into the new folder and then try to import the files again using Media Browser in Premiere Pro CS6. If this doesn't work then make a copy of one file and rename it as .M2TS and then import that single file into Premiere Pro CS6. Please update if either of the solution works for you.
    Regards,
    Vinay

  • No audio with MTS files

    I have a problem with my audio in Premiere Pro. My files are MTS, and the video works fine. There is just no audio. I use a Canon XA10 camera.

    Hi Michael,
    If you have not already done so, import these files via the Media Browser, not File > Import or by dragging to the Project panel. Once imported, allow some time for the audio conforming to complete. Report back after you have done so.
    Thanks,
    Kevin

  • Sending transcoded clip to Premiere Pro with Mono audio

    Hi there,
    I noted that others had asked this question around August 2013 but haven't seen any progress made on this issue, which is that we prefer to edit in Premiere pro with mono audio tracks, but we are unable to make transcoded material come over from Prelude with mono audio.
    We need to have total control over our audio tracks and for us in a News/ENG environment that also means fast turnaround production.  So we want to choose the part of the XDCAM clip that we want in Prelude, send it to Premiere Pro and put the interview grab (for example) down on track 1 of the Timeline with only talent mike audio (which was recorded on the camera's channel 1) and not have to pan it or worry about doing much else to it.  Then we cut the rest of the overlay with sound effects that were recorded on channel 2 going straight to track 2 on the timeline.  When we transmit it to head office we send them two discrete channels of audio: talent/VO on Track 1 and effects on Track 2.
    We only have a problem when Transcoding is involved.  With the audio prefs in PrPro set to "Mono" everything else is fine, its just that when Prelude transcodes a video it makes the audio a hassle for us, because it can only come over to PrPro as a stereo audio track.
    Adobe, is there ever going to be the ability to just make a Preference in Prelude to send the clips with Mono audio, as there is in Premiere Pro??
    Or has anyone figured this out and I am just missing something?

    In Adobe Media Encoder, set up a new preset that has the video and audio settings you want to have your source footage transcoded to:
    Then name and save that preset. The next time you launch Prelude, the preset will be an option for you to select to use for transcoding your material.
    MtD

  • No sound from Premiere Pro

    I was reviewing a video in the source tab when i realized that I couldn't hear any of the sound from Premiere Pro.
    I can see the sound db raising in the sound value bar but I cannot hear anything from Premiere Pro.
    I can hear everything outside of Premiere but nothing inside of it.

    A little more information:
    I'm listening on my headphones when the sound didn't work.
    I therefore tried to turn them off and listen over the computers and it worked over the computers speakers.
    But it still doesn't work on my headphones. I can hear every other sound than the sound from Premiere on my headphones.
    While I hear a song from for example Spotify while I edit in Premiere then I still can't hear anything from Premiere on my headphone(because it is on my computers speakers) but i can still hear everything from Spotify.

  • No audio with .mts files in cs6

    I don't have audio with .mts files problem is in bridge too i ve AE CS6 with latest updates. /in cs5 everything was ok/

    What MTS files from where? What are your audio prefs in AE? What system are you running on? Did you check the audio panel? So many questions....
    Mylenium

  • How can i buy Adobe Premiere Pro With the student discount but in one payment?

    i want to buy adobe premiere pro with a student discount but i dont want to have to make multiple payments, how can i do this?

    CS6 Education https://forums.adobe.com/thread/1585740 is pay once, own forever... IF you can use 3 year old software
    Otherwise, the current version is by subscription only... which means that when you stop paying, the software stops working
    Adobe Education... Start here https://creative.adobe.com/join/edu
    Education Plan https://creative.adobe.com/plans?plan=edu
    One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
    http://www.adobe.com/products/creativecloud/students.edu.html
    http://www.adobe.com/education/students/student-eligibility-guide.edu.html
    ID Proof http://www.adobe.com/store/au_edu/academic_id.html

  • Can't open my video files from my camera/SD card with sound into premiere pro or any software. HELP!

    I am on an OS X 10.7.5 and whenever I pug in either my Panasonic HC-V720 or the SD card I can't seem to find the private video file, I get folders like the picture bellow instead.
    I have tried in a different computer running a newer version of OS X and the private file appears instead. I can't seem to get my videos up on premiere pro CS6 with the sound I only get the image/video by importing the .mts files.
    Does anyone know what to do?

    YYou should be asking these questions on the Adobe forums.

  • Premiere Pro CC 2014 hangs - Problems with MTS files?

    Hello all,
    So I've read the other MTS file posts on here about problems importing.  I had this issue initially but moved the folder and it worked.
    I got into my project and every now and then I would get this lagging, where Premiere Pro would still play, but the cursor would be frozen, and anything I click on wouldn't highlight... can't scroll etc.  This seems to happen when the fan in my mac kicks up.
    It has gotten to the point now where I can't edit the project at all because this happens about 3 minutes in each time.  Works fine for a few, then fan kicks up and everything starts lagging and freezing.  What's weird is I found a part on the screen, that if I click it, the screen updates to what I just did.  SO WEIRD.
    THIS DOES NOT HAPPEN ON ANY OTHER PROJECT.  And this project isn't even that big.  So I highly doubt it's a computer performance issue as I've worked on RED RAW and Prores 4444 files on my macbook pro (which I'm on now) with no issues. 
    Long story short I've tried about everything, and feel the only solution is to transcode to prores and start all over with the edit (which would be brutal) but I've already completed so much work!  Does anybody have experience with this or a work around?
    Thanks!

    Hi Kevin,
    Thanks for responding. 
    I was given a drive with the RAW files on them.  I originally just used finder and dragged and dropped into Premiere, since that's what I've always done... but since the issue I'll start using what you mentioned.
    Did NOT update the project.  Started it on CC 2014.
    I tried importing the sequence into a different project and the same issue is occurring.  But below I've given more info as to my problems.   I'm really concerned I'm going to have to start it all over again.  I recently transcoded all files to Prores 422 (hq) in case that's what I need to do.   But I'm really hoping there's something I can do to resolve this.  Though I have a feeling it's the .MTS files causing issues.
    What version of Premiere Pro?
    Premiere Pro v8.1.0
    What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    OS X 10.9.5
    What kind(s) of source footage?
    AVCHD... I went about "show package contents" until revealing the .MTS files.
    What were you doing when the problem occurred?
    Editing.  Noticed in the beginning, but as the sequence as gotten longer the problem became more persistent, until now it's ALL THE TIME... and the computer fan kicks up right away like it's struggling with playback.
    What other software are you running?
    Shut down all other programs so Premiere is just running.  Still happens.  All other projects have been working fine but this is the first with .MTS.
    Do you have any third-party effects or codecs installed?
    No.
    Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
    None.
    Are you using Mercury Playback Engine GPU Acceleration?
    Yes.
    Does the problem only happen with your final output, with previews, or both?
    Everything.  Screen lags and freezes with anything.  It still plays back without interruption, but my cursor won't move, windows won't update, I can't scroll anywhere unless clicking the top part of Premiere (then it magically updates what I did a moment ago). 
    Help!

  • Premiere CS5 import.MTS file with no sound.

    when I import .MTS file into Premiere CS5, the sound can not be import~
    how can I put the video sound into premiere

    So ..is yours the 'Trial Version'?
    Read  Trial Limitations
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_pro

  • Premiere Elements 9 : no sound with .mts files

    I'm having a bit of a problem getting my mts/avchd files to work with PE9. I imported the files using the organiser, and they play fine (video AND audio) from the organiser, but when I import the clips into PE9, only video is imported. There's no audio track and (logically?) no audio to be heard. How do I fix this?
    Mind, these .mts files play fine in both the organiser AND windows 7. They're created on a Canon HF100 camcorder.

    I do not know if there is a "Getting Started" tour of PrE offered now, but there should be, and in big, bold print, there should be a first message, that explains the necessity of matching the Project Preset exactly to the source footage. Next, the tour should go into how to determine the attributes of the source footage to a Project Preset. If there is not such a "tour," I feel strongly that there should be.
    I believe that PrE 9 has added a feature that helps one match source footage to a Project Preset. In PrPro CS5, one would just drag one of the source videos to the New Icon, at the bottom of the Project Panel, after Import. This then creates a new Sequence (think mini-Project within a "master Project"), with the exact specs. required.
    Many new users are unaware of the above necessity, and then are confounded by a whole list of Presets, that often do not make a lot of sense - yet. Probably a good 20% of all program problems trace back to a mis-match between the Project Preset and the source footage.
    As for mixed format/CODEC footage, the best way to handle that is to either convert secondary set of footage to match the primary footage, for which the Project Preset has been established, or to do separate Projects, each matching their source footage 100%, and then doing an Export/Share to a format/CODEC, that matches the primary footage. Then, one can easily combine all of the footage into a single, new Project, or Import the Exported footage into the Project with the primary footage for final editing.
    Good luck,
    Hunt

  • Adobe Premiere CC2014 AVCHD mts files no sound restricted Dolby encoder - solution?

    I wanted to import mts files from a Sony NEX VG10 Video camera. They are AVCHD files = .mts.   This works perfect in premiere Pro CS6. Also in my school in Bruges with Premiere Pro CC version 7 something. But with premiere Pro CC2014 (school in Brussels) I can import the files perfectly for video, but the clips do no have sound. Premiere gives a fault message: Dolby audio decode licensing restricted.
    On the forum people say that for CC2014 Adobe doesn't pay licensing to Dolby and this is the reason. But this looks nonsense to me. Suddenly making a program useless?
    Of course I can rewrap the files... But then I can as well stay with FCP and would be very much better of with AVID. So.... who can tell me and give a solution to this problem.
    Thank you.
    Joost.

    I forgot to say... We use mac.

  • No sound imported with mts file

    I've a paid subscription version of  CS6. I'm trying to import an mts file but no audio will show in the timeline panel. This worked perfectly yesterday. I can preview in bridge with no problem. I can play back with vlc player no problem. What's going on

    Sorry my friend. I did not mean to insult your intelligence in any way. I'm on Lynda.com a lot. Just did the one on updates to CS6 Premiere and I've been working professionally in the industry for over 20 years. Sorry I can't help much with this issue.
    I am wondering from other posts I've seen, if the problem is with third party cards, AJA, BMD, Matrox, etc, even the CUDA cards. Don't know if you use these. Our CS6 Premiere is only on a MacBook Pro at the moment, so none of the third party concerns and it's working fine with AVCHD, ProRes, HDV. I did have one file go offline, but easily relinked it and all it good. All the best!

  • .mov files no video but has sound in premiere pro cs6

    I know this isn't adobe. However, all of my .mov files play with no video in quicktime, premiere pro cs6, and sony vegas 9. I've looked into the missing codec, and quicktime brings me to the general page with multiple codecs listed. This happens with two different types of cameras. Both HD. I have Windows 7. Does anyone know why the files won't play video? Thanks.

    jon - no idea why you were such a snarky SOB in your reply.  person was just asking for some help.  obviously stuck and could use some advise.  you could have chosen to ask a few clarifying questions to see if additional info could be gleaned.  instead you CHOSE to be mean.  NOT COOL.  if you hate being a support person, dont offer your help and dont go online.  otherwise, change your attitude.
    If you feel my comments were inappropriate, then feel free to report my post as such. If you feel the information was incorrect, then please provide what you feel to be more correct information. The object of my comments was to 1) point out that no accurate solution was possible without amplifying information, 2) inform the individual why more information was needed, and 3) describe at least three methods for getting the required information. It was not my intent to be either "mean" or "cool" but rather to teach the individual how to analyize their video content in order to become more self-sufficient in the future. Perhaps if you concentrated more on the content of my response than on your emotional interpretations of what you think was implied, you might find something of value.
    My question for you is,"Did you actually create a new profile tonight to hide your normal identity while you berate my response?"
    for lordrebeccasama - there are people out there that would like to help.  I would suggest you try to get answers to some of these questions and post - people may have some ideas:  Does this problem occur with all MOV files or just certain ones.  if just certain ones, can you ell which camera or source produced the file?  can you see if the files can be played on other machines (like another PC or a MAC)?  if you can, try to get into the properties of the MOV file (the container) and see if you can tell how it was encoded.  good luck - and on behalf of all people that actually like to help, i apologize on behalf of jon.
    Since you have essentially asked for the same information I did, albeit in a more indirect manner, I don't feel any apology is needed on my behalf.

Maybe you are looking for