No sound in recording with g12

Hello, I just bought a refurbished G12 from Canon. I get no sound when I playback a movie I recorded.
Solved!
Go to Solution.

This is the second G12 I've ownwd. Went through every conceivable thing I could think of concerning the audio. Nothing worked - Mute, Un-mute, Volumes, etc. Could not find anything to enable audio. I do hear a slight sound as unmuted silence. I just bought this as refurbished from Canon. I read a lot about refurbished units from forums and the like and I was convinced that they are actually better than new because the go through a rigorous exam and testing through and through and also with human interactions. I read that they actually find hidden problems that never would have been found elsewise. So my first experience has not gone well.

Similar Messages

Sound while recording with audigy 2 zs plati

i have the audigy 2 zs platinum. i'm using the /4" line in 2/mic in 2 to plug my guitar into. i can hear the guitar fine until i hit the record button on my software. it records what i'm playing, and will play it back with sound, but, again, no sound while recording. i also noticed there's no "li've" sound during playback. i've checked connections, and installed the latest drivers for the card. i'm using adobe audition 2.0 to record. please help!

Sure. Selecting "Line 2" records the signal just after it has entered the main CL chip, and selecting "What you hear" records the signal after it has been through the mixer/effects DSP in that chip. It's likely that CL lowers the volume a notch to reduce the chance of clipping from mixing/effects processing. Note that the signals at that point are 32-bit, so that some additional headroom really doesn't lose you anything; all you need to do is to raise the recording volume a bit to compensate.
The card's unity settings are designed for 50% on the recording slider and 00% elsewhere (i.e. there is a 2x digital multiplier on the recording slider). You may get some useful insights from a page I have: <a href=http://pages.sbcglobal.net/hamakerd/sbsrc/ target=_blank>http://pages.sbcglobal.net/hamakerd/sbsrc/[/url] by following the Additional Information link at the bottom, and seeing my comments (under the General heading) about how I determined the recording volume settings I used in that testing.
-Dave
[email protected] Edited by dwh on 04-07-2005 04:57 PM

No sound during record with soundblaster for Vi

I have Windows Vista and am using Audigy Advanced MB Sound Blaster Wave Studio to record music from a multi-track recording source. Wave Studio records it just fine and will play it back well, but I can't hear the music while I'm recording it, which is necessary for me to hear levels of various instruments as they appear in the song, etc.. I've spoken with Dell and Creative and both sides tell me the other one is responsible for support for this item. I find it hard to believe Creative doesn't support it's own product, or at least supply me with an instruction manual.
Does anyone know of this problem, and is there a fix for it's? Neither Dell nor Creative are helping me in the least bit. P.S. This feature did work on a previous version of the Creative software on a previous computer that ran Windows XP. Now I've got a new computer with Vista, and a new Creative software disk that is made for Vista. Any suggestions??

Thanks. It worked. I was equally frustrated. I just followed your text and now, hopefully, we are back on track!
Many thanks for your posting.

No sound when recording videos 4S

Just got my 4S today and have found that every time I record a video it doesn't record the sound. There is a sound on playback, like a crackling or like a old projector noise. Has anyone else had this?
I can use Siri, I can play youtube videos back but I just can't get sounds to record with my video.

I rung apple and they are sending me out a replacement. I must say I was very impressed with the customer service. I was on the phone for less than five minutes (would have been quicker if I could remember my phone number!) and I received an email saying they will be sending me the replacement quicker than they told me on the phone.

No sound after recording but i see the notes on Logic

No sound after recording with my Keyboard. My keyboard make the sound when i record it but after there is no playback i see the notes on Logic but nothing. And if i try to copy or cut and paste the part i record from the keyboard it work after..i really don't understand!

Does it say Midi Ch 1 in the event list for the Midi region you recorded?
This is most likely to be User error... but to identify what exactly.... and to rule out any corrupted settings in LPX..
Try trashing Logic's preferences and CS prefs as per this support note.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
if that doesn't fix things then...
Which Software instrument (SI) are you trying to play?
You do have a SI loaded in yes?
You are using an Instrument Track yes?
You are not usimg an external Instrument track are you?
If you drag an Audio loop from the loop browser to an Audio track.. can you hear sound on playback?
Please post a screenshot of your arrange window showing the channel strip for the track you recorded midi to... That will help us see how you have set things up.

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

No sound when recording videos with iphone 4s - ios7

Since I have downloaded ios7 to my iphone 4s I am no longer getting any sounds when recording videos. When looking back at past videos I have recorded, they still have sound in the playback. I have tried resetting my phone and reseting it to factory settings. Any recommendations?

Hey Bryan3939!
If I'm reading this correctly, it sounds like you might be experiencing an issue with your microphone recording during videos. I have an article for you that can help you troubleshoot this issue:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for using the Apple Support Communities. Have a good one!
-Braden

How do you sync sound from a digital recorder with video?

Can anyone tell me how to sync sound with video? Not a voice over but Voice recorded when video was shot. Voice was recorded on hand held digital recorder.

When you're shooting use the ciak , then when in imovie, sync the sound of ciak with the closing of it and you're done
If u havent's used , just seek for a sound or a part of speech witch is very evident to sing
Do it before cut video
hope helps
J

Sound recorder with ActionScript

Is it possible to build a sound recorder
with ActionScript? I know that you can
do it with a Flash Media Server. But that
requires a steam and a server.
I just want a simple recorder/player so
that a user could test and adjust the
settings of his/her microphone by visiting
a web page. A user should be able to do
it without any server resounces, since the
sound card/microphone/audio are already on
his/her desktop.
I'd appreciate any suggestions, with or
without ActionScript.

AFIAK not possible without a media server. But you can use
the open source media server "red5". Its free and can do everything
(at least thats what the developers say) the Flash Media Server can
do.

Sound recording with duration

hi all ,
i have some trouble about sound recording function.
i want to have 30S duration of sound input recording and also , if the user click the finish button
the recording will be stopped even it is still have time for recording.
i have tried to use loop with timer to take the data for 1 second period .but it will show the error
is there any other method to perform this function ?
Thank you

i have tried to use loop with timer to take the data for 1 second period .but it will show the error
is there any other method to perform this function ?
You are on the correct track here using a while loop and reading data in say 1 seconds interval. But try to skip the timer. Let the sound card do the timing details for you. Also use a larger buffer size for the sound card. You set the buffer size by the "number of samples/ch" control in the Sound Input Configure VI. Set this value to be at least 2 to 5 times larger than the "number of samples/ch" value used in the Sound Input Read VI. My guess is that you have a sound card buffer overflow problem.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

I want recording LP's with Audacity 2.0.5 since I use Maverick I can't hear the sound before recording. What can I do?

I want recording LP's with Audacity 2.0.5. Since I use Maverick 10.9.3 I can't hear the sound before recording. Does somebody know how to get
the presound before to click on record?

You have to do some work on your own.
Start here:
http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

See these threads for some possible solutions:
Bluetooth and 10.7
Bluetooth speaker error

My recorded footage without sound will not play, but will when recorded with sound, any ideas?

Hi there community!
I have recorded alot of footage on a digital Harinezumi 3 camera and have run into a problem in post production.
Some of the footage is recorded with sound, and plays fine. However, with most of the footage, i chose to turn the recording of sound off. These files without sound will not play in any player, even when Perian is installed.
These are the specs of the video I have been able to find out.
File type: .AVI
Video Stream: JPEG
This is all I can find out, so I am thinking it is an M-JPEG file rendered as an AVI file. VLC player says it can not play the video or audio format 'undf', whatever that means. Another player says it needs a .moov encoder, but I do not see how this is possible. I have also tried attaching audio to it via Logic 9 with no success.
I am at a loss, and I really need this footage for a project. Any ideas?
Thanks for any help!!

It won't let me post the video in the forum, so here is a link to it in dropbox.
https://www.dropbox.com/s/k4nz8mg18p4thzd/Mountain%203.AVI?n=145237283
Accessed the file at dropbox. Played the DropBox "display" file in scripted player, played the same resource file using the Safari plug-in, and then downloaded the resource file using the QT 7 Pro "Open URL" option only to learn that this file was an H.264 transcode and not your original file. Used the DropBox download option to download the original Motion JPEG file in AVI file container. File plays as is in both QT X v10.2 and QT 7 v7.6.6 players under Mountain Lion v10.8.4 on my system.
Motion JPEG is one of the "lagacy" codec components turned off under Lion and which remains turned off under Mountain Lion. However, as I understand it, Motion JPEG files are supposed to be passively supported (playback supported) under these systems but requires the codec to be turned back on if you wish to export files using this codec. I turned both Motion JPEG and Motion PNG codecs back on quite a while back and have Perian installed which, as you can see, supplied the OpenDML version of the Motion JPEG codec component to actually play your file on my system. Unfortunately, since QT uses a LIFO codec component list generation strategy, I would have to remove Perian to test whether or not the system configured Motion JPEG component would then become the active decoder. (Did this a year or two ago but not willing to do so again at this time.)
Suffice it to say, the file should play in QT on your Mountain Lion system assuming the correct version of Perian is installed, it is actually active, and you have no conflicting software or hardware installed on your system. Have posted an MOV file containing your Motion JPEG video data in case you want to see if it will play correctly on your system.
http://downloads.walker4.me/downloads/Temporary_files/Mountain%203.mov

Ridiculously Awesome Sound Recording with Video

Although I was aware that the mic's on the 928 were touted to be better at recording loud music than most other phones out there, I never had a chance to put it to the test.
Last week I was at a small bar and recorded my friends band playing. I was really close to the speakers and they were fairly loud. I made sure to turn off the sound filter in the recording setting of the video. Just for comparison, I had my brother record with me on his Razr Maxx. The next morning I played the video back from my phone and plugged in some good earphones.
OMG! No distortion at all!!! Full clean bass!!! Full mids and highs!!! Crisp and Clear! My brothers sound on his recording was a huge distorted mess! Anyone else have similar experiences? TI wanna make sure this wasnt just some freak luck with video recording...

First, what is the file format, and its specs. for the remote recorder?
Though the rates of modern cameras and digital recorders SHOULD match 100%, in the real-world, they seldom do. This make perfect syncing a labor intensive process.
One should do tests between the cameras and the recorders, to find out the % or error. Then, adjust their Audio to match first. As an example, one user in the PrPro Forum tested his Panasonic cameras, and his Zoom recorders, and found that the Zooms were off by 0.04% constantly. To correct this, he used the Time Remapping (with Maintain Pitch checked), and would apply that adjustment to all of the Zooms' files - perfect sync.
As for the Waveform not displaying for your remote recorder, did you allow those files to completely Conform (creation of the CFA and PEK files, the latter is the Waveform Display)? See this article: http://forums.adobe.com/thread/726693?tstart=30
Also, you should be able to increase the vertical zoom of your Audio Tracks, and hence any Clips on them, by hovering the Cursor over the junction between Tracks, in the Track Header, and when it turns into a = sign, with up/down arrows, click+drag. Then, you should be able to find commonality in the beginning, to sync up to. Tip: for this critical work, toggle the Snap feature OFF, with the S key.
Good luck,
Hunt

Sound blaster Z with no sound from Optical S/PDIF output

Hi,
I'm trying to record music from a Denon DTR-2000 Digital Audio Tape deck. I have connected a optical S/PDIF cable from Optical Out on the DAT player to the Optical In on the sound card but I'm not hearing any sound.
I've also tried with a CD/DVD player using optical out and still no sound.
My only concern is that whilst there is a definite click when the TOSLINK cable is plugged into the CD/DVD player it doesn't seen particularly well connected in the sound card.
If I start Smart Recorder with Source as Digital-In (SoundBlaster Z) and press Analyse there is no movement in the sound level bars. Presumably there should be.
Hope you can offer some help please.

Just to clear this up. The original cable was fine but the quality of the connectors left a lot to be desired. The plugs needed to be pushed in quite forcibly.

No sound in recording with g12

Similar Messages

Maybe you are looking for