No sound in speakers in my all in one omni 27

No sound in speakers in my all in one omni 27. Ran all diagnostics, update driver, nothig helped!!!
Please help!!!

It could be a hardware issue. You can confirm this by doing an HP Recovery back to factory defaults.
Performing an HP System Recovery (Windows 7)
If that fails you can contact support for your repair options: In North America, call (800)-474-6836 outside of North America find your support number here HP Technical Support
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • Can I connect extra speakers to my all-in-one ?

    Can I connect extra speakers  to my all-in-one ? if so, how ?

    Malolo wrote:
    Can I connect extra speakers  to my all-in-one ? if so, how ?
    Hi,
    Sorry, don't know ! What is it ? what is its Operating system ? Please read the following article then post back:
        http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/Advice-for-asking-the-quot-V...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • External speakers and the all in one mac

    I have hooked up my stereo to my imac thru the headphone port. I am wondeing if there is anyway to still get the mac speakers to work while this is plugged in as I don't want the sound from the stereo all the time. What's interesting is that when the stereo is powered off, and I start the computer, it still makes its start up system sound. Do I have the stereo plugged into the wrong port? What is the other input port for?

    Hi,
    the other port is an analog/digital audio input port.
    The startup sound is always coming from the internal speakers. Apple designed it that way.
    For switching input/output sources easily have a look at SoundSource: http://www.rogueamoeba.com/freebies/
    regards
    Stefan

  • Bios power on password need to disable it hp desk top all in one omni 120-1134

    how do you turn off or disable the password in bios when computer reboots or starts it makes me enter my password i didnt realize that was what i did until i cant turn t off i though it was windows password but its   not

    John, welcome to the forum.
    Here is a guide to help you change the settings to logon automatically without entering the password.  I have used this guide many times.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Attach external powered digital speakers to All-in-one 61001020 Touchsmart

    Is there any way that I can attach external powered digital speakers to my  All-n one  61001020  Touchsmart Desktop please.  
     A diagram of the rear input area  would be helpful
    This question was solved.
    View Solution.

    Hello Larry222:
                Yes you can no problem on left side under usb ports is your external micro phone and speaker or head set ports . When you do use these ports sound will no longer come from internal speakers. O.K. You can use windows media player's equalizer to set sound adjustments and balance. Plug in speaker jack into head set and one cable will have usb male end. Just make sure you are using computer speakers they come with the attach jack and usb plugins. Not like stereo speakers where you just attach wires. Have fun and enjoy your new state of art computer.
            Oh one more thing these computers have blue tooth witch is great I have no wires connected to my computer my head set is blue tooth and my printer as well. Another nice feature. Do not forget they have extra ports hiden under removable plastic on back left where you can hook it up to TV another monitor and where your t.V cable plugs in plus more USB ports.

  • My laptop lost all his sound n speakers..only headphones work.is a g6 b1z96ea

    my laptop lost all his sound n speakers..only headphones work.is a g6 b1z96ea
    what the hell is going on??i tried anything but doesn´t works

    Is "Do not disturb" activated in the Settings?
    Did you try to set up the phone as new device without using the latest backup?
    How to back up your data and set up as a new device
    Also try these steps:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    copied from Troubleshooting iPhone hardware

  • No Sound from speakers but Headphones work on HP All-In-One 23-p142

    I recently purchased my computer HP Pavillion 23-p142 with Windows 8.1 64bit on July 9, 2015 and everything was golden...couldn't be happier with it for my needs. Now, in just the last few days, the sound doesn't work at all. No sound from Windows Media Player, Youtube etc. Absolutley nothing. Not even system sounds. I've tried troubleshooting tips such as going into Computer Management> Services> Windows Audio and restarting that service...still no luck. I've uninstalled and reinstalled the Realtek HD Audio drivers several times and it worked on the very first attempt then the sound went away again after a few hours. I'm at a loss for what to try next...Any help would be greatly appreciated. Thanks.  PS. I forgot to mention my headphones work fine. And here are some screenshots of devices...if that helps with anything.  

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how you are not able to get sound from the speakers of your desktop computer, and I would be happy to assist you in this matter! Do you speakers work on another computer? Is there any software you need to install to properly configure your speakers on your system? In the meantime, I recommend following the steps in this document on No Sound from the Speakers (Windows 8). This should help return the sound to your computer using your speakers. I also recommend returning your system back to a previous restore point before the issue occurred. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

  • Audio not coming out both external speakers on Lenovo Horizon All-in-one

    I have just received my Lenovo Horizon 27 inch all-in-one pc and I've noticed a problem with the audio.  When I plug in my external speakers I only get audio out of the left channel.  I noticed another person with the same problem posted to the forums some time back but the Lenovo tech never got back to him with a solution so I'm really hoping I'll have better luck.
    The sound comes out propperly when headphones are plugged in but my speakers only output a single chanel of audio.  The speakers work fine on other PCs.  As was suggested in the other thread, I compared the headphone jack and the speaker jack and they are identical.  Same number of stripes, same length, and I believe the same girth.
    Here's the url for the other post I mentioned: http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/Horizon-27-sound-issue/m-p/1475392/high...
    I also can't seem to find where the number is to call for support so if someone could help me with that I'd be very appreciative.
    Thanks,
    Charles
    Solved!
    Go to Solution.

    Okay, so I called Lenovo support and as always, they were polite but their solution was that it was a software issue and I needed to restore my computer, so not very good advice but often given by every tech support.  It's like cutting off your hand because you have a cuiticle.
    Anyway, so in all the sitting and waiting I had a thought come back about when I used to manage a computer store that sold Macs.  Apple, when they released the Macbook Air, tried to squeeze so much into the tiny case that there were a million problems with the device one of which was that some headphones and speakers worked fine (namely ones made by Apple, go figure) and others wouldn't work at all.  It was a design flaw related to have very low tollerances for minor differences in the headphone jacks length et al.
    So I used an extension audio cable with my speakers and it works fine now.  So the answer is that there is a design flaw in the Lenovo Horizion related to the effort to squeeze so much into the thin device which lowers the devices tollerance for variations in the size and shape of the headphone plug.  I hope this helps someone else since the solution is simple and if it had been in a database it would have saved a lot of time for me and the techs.  Not complaining, just wanting to put this information out there for others who might be experiencing the same sort of problems.

  • MSI ex600 sound headphones&speakers problem

    Hello all I have MSI ex600 and i have problem with my sound
    When speakers playing some music and i want hear it in my headphones its problem because speakers playing away
    So i hear music on headphones and speakes too
    I try find some solution (and its many problems with this stuff) but for me didnt work
    Some information of me Sound card :
    Sound(a)   : 82801H ICH8 Family HD Audio Controller module: snd-hda-intel
    [root@SilentHill ~]# lsmod | grep snd
    snd_seq_oss            33408  0
    snd_seq_midi_event      7936  1 snd_seq_oss
    snd_seq                55936  4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device          7956  2 snd_seq_oss,snd_seq
    snd_pcm_oss            42400  0
    snd_mixer_oss          17024  1 snd_pcm_oss
    snd_hda_intel         374568  3
    snd_pcm                82312  2 snd_pcm_oss,snd_hda_intel
    snd_timer              22536  2 snd_seq,snd_pcm
    snd_page_alloc          9232  2 snd_hda_intel,snd_pcm
    snd_hwdep               9096  1 snd_hda_intel
    snd                    57320  15 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
    soundcore               8096  1 snd
    [root@SilentHill ~]# cat /etc/modprobe.conf
    # /etc/modprobe.conf (for v2.6 kernels)
    # alias wlan0 ndiswrapper
    # --- BEGIN: Generated by ALSACONF, do not edit. ---
    # --- ALSACONF version 1.0.15 ---
    alias snd-card-0 snd-hda-intel
    options snd-hda-intel index=0 model=5stack
    alias sound-slot-0 snd-hda-intel
    # --- END: Generated by ALSACONF, do not edit. ---
    That was my last stuff what i tried (options snd-... in modprobe.conf)
    Thanks and sorry for my bad english

    Add this to your modprobe.conf :
    options snd-hda-intel model=3stack-6ch
    It will add a headphones switch to your alsa control which if you disable will mute the onboard speakers.
    Works on my MSI vr600

  • 23-d038c all-in-one computer: speakers won't play? or don't exist? help!

    I am setting up a HP ENVY 23-d038c. It is an all-in-one Touchscreen with Beats audio. I already have an HP ENVY laptop with Beats audio, and liked it, so I decided to get this new one to fill a need for a computer in the family room. It is "new' but refurbished, via HPP on BestBuy.com.
    While the volume control shows it should be making sound, I cannot get it to play sound. When I look at sound devices drivers, it appears to be telling me there are jacks for headphones and external speakers if I want to plug them in. But I was under the impression that all "all in one" computers by definition have integrated speakers - especially one with Beats audio.
    It may be that this is just because I am unfamiliar with Windows 8 so am blundering around, but is it possible this computer doesn't have integrated speakers, and/or is there any advice anyone can offer?
    Thanks!

    Hello csavage7:
                Yes your computer does have internal speakers. Go to your computer's web site here. Trouble shooting section Sound and Microphone. Tittle of web page No Sound from Speakers Windows 8. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03515411&tmp_task=solveCategory&cc=ca&dlc=en&lc...
    It tells you how to trouble shoot it. I hope it is an easy fix. The directions are not what I am use to because I am old fashion and use Windows 7 and below computers. If you get stuck let us know thank you frrw.

  • Sound from speakers as well as headphones after bios update in pavilion g4 1121 tx laptop

    Dear madam/sir
    after performing a bios update as sugested by hp support assistant I am getting sound from speakers as well as earphones .I stay in a small town and there is no hp centre nearby .I am a student staying in hostel where i cant play sound through speakers as it disturbs my room mates .Kindly assist .
               product details
    product no  ; QB404PA#ACJ
    product : hp pavilion g4 1121 tx
    purchased : sept 2011
    Thank You

    Hi @satyakam 
    Welcome to the HP Support Forums!
    I understand that you are enjoying your sound  from everything today. I am happy to help.
    If you have a sound application installed along with your sound driver, then I would check the settings for the speakers and headphone in that application.
    Then I would make your headphone the default device when it is plugged in.
    To make headphone as the default device
    1.    Click on Start; Go to Control Panel.
    2.    Click on Sound.
    3.    Switch to Recording.
    4.    Select your microphone/headset as the default device.
    5.    Save the changes by clicking on OK.
    Also you can Uninstall and re-install your audio device drivers, to do that:
    1.    Click on Start; in the start search type “devmgmt.msc” without quotes and press Enter.
    2.    Expand Sound, Video and Game controllers.
    3.    Right click on the audio component and then click uninstall.
    With the driver uninstalled then download and re-install the driver from:
    HP Pavilion g4-1121tx Notebook PC Drivers
    Just be sure to select the correct operating system from the drop down, and click next, which will refresh the list of drivers below.
    Let me know if that helped at all.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • No sound from speakers 2-IDT High Definition Audio Codec

    1. ProBook 6550b
    2. Windows 7 Professional SP1
    3. No error
    4. No any changes in Operating System
    5. No sound from from speakers 2-IDT High Definition Audio Codec. I have sound from speakers only(!) when Skype starts or somebody calling me by Skype regardless headphones connected or not (Skype settings).
    All other time I can hear sound only from headphones regardless headphones(RTC) connected or not.

    Good Evening,
    Did you get this fixed I have exsactly the same issue? Two rebuilds and a new motherboard and Im still stuck
    Thanks
    Paul

  • New headset, but certain programs are transmitting sound through speakers and not headphones.

    Spoiler (Highlight to read)
    Hello,
    Hello,
    I just recently purchased a new headset for gaming but have been having some issues with it and the system sound. One major issue is when I call someone on skype, the sound from Skype or the call will go through the headphones, but any other audio comes out of the speakers. I have also notices that iTunes also does not function when I am in a call as well. Some examples would be if I were to want to watch a YouTube video while in a call, the sound would come through the speakers and not the headphones. However, I did find a fix for it. All I had to do was disable the main speakers and the audio was transmitted to the headphones. Another example would be if I wanted to run games via Steam (Garry's Mod, TF2, ect.), I wouldn't get any sound whatsoever from the game. Not through my speakers or headphones. With one exception, Garry's Mod volume I can hear through the speakers while in a Skype call, but I want the sound to come through the headphones. But with TF2, I get no sound whatsoever. If you need any more information about my issue, please feel free to ask. Thank you.
    This question was solved.
    View Solution.

    Hello @LayneStaley,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how certain programs are transmitting sound through speakers and not the headphones, and I would be happy to assist you in this matter!
    To ensure that your headphones are utilized when plugged into your notebook, I recommend following the steps below:
    1. Click the Start button
    2. Click Control Panel
    3. Click on Hardware and Sound (sorting the control panel icons by "category"), and then click on Sound
    4. Under Playback, you should see one or two speaker icons. One of them should already have a green checkmark next to it (which will be your notebook's main speakers). If the second Speakers icon is not visible, right-click in the list of devices and select Show Disabled Devices
    5. A second, disabled icon of "speakers" should appear. Right-click this icon and click Enable
    6. Select the newly enabled speaker device, right-click it, and select "Set as Default Device".
    7. Click Apply.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Speakers stopped working all of a sudden in my laptop HP pavilion g6 (windows 8)

    Its been a year i bought lapi. i hardly used it.. My laptop speakers stopped working all of a sudden. I think its coz i upgraded my os from windows 8 to 8.1 (automatically). Even though i upgraded it still askes for upgradation every time i switch on the laptop..
    Can anyone suggest me the issue..??
    Thanks in advance for solution..

    Hello San123,
    Welcome to the HP Forums!
    I will definitely assist you with the computer's issue regarding lack of sound from the speakers. Before anything else is done, please make sure you try every step in this thread: Troublesho​oting Guide: Audio does not Work after a Certain Period of Time
    If every step does not help, please provide the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    5. What steps have been attempted from my first post on this thread, and what were the results?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Either way, let me know what happens. Thanks!
    Mario
    I worked on behalf of HP.

  • My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

    My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

    Hey Hype.Beast.187,
    Here are some troubleshooting steps for not being able to hear sound through your iPhone speakers. I'd pay special attention to steps 8, 9, and 10 in your situation:
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    All the best,
    David

Maybe you are looking for

  • Visio 2010 Std installation problem on Windows 8.1

    Visio 2010 Standard fails to install on a new Windows 8.1 Dell XPS 12 system. It goes through the installation, seems to complete, but at the last moment, the progress bar goes back half way and then an error message appears: Vision encountered a pro

  • 0000000003/2007 excise invoice is not meant for exports.

    WHEN IAM CREAING ARE 1 IA M GETTING THIS ERROR 0000000003/2007 excise invoice is not meant for exports. Message no. 4F242

  • Microfon problems s400 with noise reduction

    Hello people, have a problem with the microfon sound. This recording is either noisy (without HD driver and with HD drivers without noise reduction) or it is distorted (with HD drivers and noise reduction). Drivers I've tried from the Lenovo page and

  • DrillDown and field order

    Hello, I have a dimension with several levels each one with a code field and a description field. When I drill from an high level to a lower one the bi give me the descritpion before the code... is there a way to tell in which order drill down fields

  • Error using multiple subqueries in a from statement - sorry so long

    From the query below, my results should only be 3 rows but, for whatever reason, I'm getting 3 of each operation number. Can someone PLEASE tell me why this is looking more than once? Version - Oracle 9i Here's the query select base.equivalent_operat