No sound in speakers

no sound in speakers

System Preference > Sound > Output > Internal Speakers
Make sure Mute is not enabled.
Reset PRAM.  http://support.apple.com/kb/PH4405
Reset SMC.     http://support.apple.com/kb/HT3964
Choose the appropriate method.
MacBook Pro?
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
Best.

Similar Messages

  • No sound from HP G62 laptop and can no longer get sound from speakers or headphone jack . USB sworks

    have an HP G62 laptop.  I can no longer receive sound from speakers or from headphone jack.  If I plug speakers into usb - I will get sound.  Any ideas?

    I don't think I have anything to offer that you haven't done. In Device Manager, Device status says "working properly" and you've reinstalled this driver.
       Realtek Audio Driver for Windows XP
    Right?
    The only other thing I know to do is restore the hard drive to its original factory fresh contents.
    -Jerry

  • My laptop lost all his sound n speakers..only headphones work.is a g6 b1z96ea

    my laptop lost all his sound n speakers..only headphones work.is a g6 b1z96ea
    what the hell is going on??i tried anything but doesn´t works

    Is "Do not disturb" activated in the Settings?
    Did you try to set up the phone as new device without using the latest backup?
    How to back up your data and set up as a new device
    Also try these steps:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    copied from Troubleshooting iPhone hardware

  • Why do I still hear sound through speakers when I'm using ear buds?

    Why do I still hear sound through speakers when I'm using ear buds?

    likely same issue just the detector is stuck in the opposite setting
    https://discussions.apple.com/thread/1343532

  • MSI ex600 sound headphones&speakers problem

    Hello all I have MSI ex600 and i have problem with my sound
    When speakers playing some music and i want hear it in my headphones its problem because speakers playing away
    So i hear music on headphones and speakes too
    I try find some solution (and its many problems with this stuff) but for me didnt work
    Some information of me Sound card :
    Sound(a)   : 82801H ICH8 Family HD Audio Controller module: snd-hda-intel
    [root@SilentHill ~]# lsmod | grep snd
    snd_seq_oss            33408  0
    snd_seq_midi_event      7936  1 snd_seq_oss
    snd_seq                55936  4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device          7956  2 snd_seq_oss,snd_seq
    snd_pcm_oss            42400  0
    snd_mixer_oss          17024  1 snd_pcm_oss
    snd_hda_intel         374568  3
    snd_pcm                82312  2 snd_pcm_oss,snd_hda_intel
    snd_timer              22536  2 snd_seq,snd_pcm
    snd_page_alloc          9232  2 snd_hda_intel,snd_pcm
    snd_hwdep               9096  1 snd_hda_intel
    snd                    57320  15 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
    soundcore               8096  1 snd
    [root@SilentHill ~]# cat /etc/modprobe.conf
    # /etc/modprobe.conf (for v2.6 kernels)
    # alias wlan0 ndiswrapper
    # --- BEGIN: Generated by ALSACONF, do not edit. ---
    # --- ALSACONF version 1.0.15 ---
    alias snd-card-0 snd-hda-intel
    options snd-hda-intel index=0 model=5stack
    alias sound-slot-0 snd-hda-intel
    # --- END: Generated by ALSACONF, do not edit. ---
    That was my last stuff what i tried (options snd-... in modprobe.conf)
    Thanks and sorry for my bad english

    Add this to your modprobe.conf :
    options snd-hda-intel model=3stack-6ch
    It will add a headphones switch to your alsa control which if you disable will mute the onboard speakers.
    Works on my MSI vr600

  • Final cut pro nice professional sound monitor speakers

    I would like some nice book shelf style nice looking sound monitor speakers for my mac pro, when you see people with edit suites in a edcit studio on TV they always have some sexy looking bookshelf speakers, any ideas where to buy these and which are very good at sound monitoring?
    Daz

    Best to visit a Pro Audio store - one that caters for musicians/pro audio engineers. Tell them you need "Near-field monitors", but your budget is limited. Seriously - audio engineers spend more on their near-fields than I spent on my plasma monitor. There are two types - self-powered, which have internal amplification, and those needing amplification, in which case a standard hi-fi amp should do you. There is a price differential, of course, and it is also brand dependent. I am still getting good service out of a pair of Spirit Absolute Zeros, which are around ten years old.
    Another consideration is: how far can you separate them from your video monitors? If they are unshielded, their internal magnets will interfere with your picture or your screens if too close - shielded will cost more.
    j0nn0

  • No sound in speakers in my all in one omni 27

    No sound in speakers in my all in one omni 27. Ran all diagnostics, update driver, nothig helped!!!
    Please help!!!

    It could be a hardware issue. You can confirm this by doing an HP Recovery back to factory defaults.
    Performing an HP System Recovery (Windows 7)
    If that fails you can contact support for your repair options: In North America, call (800)-474-6836 outside of North America find your support number here HP Technical Support
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • I installed win8 64bit on macbook pro. everything running good but i am not getting sound in speakers. i am getting sound in earphone/headphones but not in main speakers.

    i installed win8 64bit on macbook pro. everything running good but i am not getting sound in speakers. i am getting sound in earphone/headphones but not in main speakers.

    Have you checked System Preferences -> Sound to see the Output when nothing is plugged in the headphone jack? Also, check if the headphone jack shows a faint read-light, which is the optical laser.

  • TS1574 optic digital port can't be shut off and the sound of speakers not working! what to do?

    optic digital port can't be shut off and the sound of speakers not working! what to do?
    this happened after taking out the head-phones. Now even after pressing CMD+ALT+P+R when booting - the sound of booting appeares BUT after the desktop is ready the sound doesn't work and sound buttons show the sign "circle with crossed line"

    If there is a red light visible in the audio output port, the switch id stuck.  Insert the earphone jack a few times.  If that fails to trip the switch, try a toothpick or similar device and jiggle it inside the port.  If that fails, try a shot or two of compressed air.  If still no success, go to a repair facility.
    Ciao.

  • Sound from speakers as well as headphones after bios update in pavilion g4 1121 tx laptop

    Dear madam/sir
    after performing a bios update as sugested by hp support assistant I am getting sound from speakers as well as earphones .I stay in a small town and there is no hp centre nearby .I am a student staying in hostel where i cant play sound through speakers as it disturbs my room mates .Kindly assist .
               product details
    product no  ; QB404PA#ACJ
    product : hp pavilion g4 1121 tx
    purchased : sept 2011
    Thank You

    Hi @satyakam 
    Welcome to the HP Support Forums!
    I understand that you are enjoying your sound  from everything today. I am happy to help.
    If you have a sound application installed along with your sound driver, then I would check the settings for the speakers and headphone in that application.
    Then I would make your headphone the default device when it is plugged in.
    To make headphone as the default device
    1.    Click on Start; Go to Control Panel.
    2.    Click on Sound.
    3.    Switch to Recording.
    4.    Select your microphone/headset as the default device.
    5.    Save the changes by clicking on OK.
    Also you can Uninstall and re-install your audio device drivers, to do that:
    1.    Click on Start; in the start search type “devmgmt.msc” without quotes and press Enter.
    2.    Expand Sound, Video and Game controllers.
    3.    Right click on the audio component and then click uninstall.
    With the driver uninstalled then download and re-install the driver from:
    HP Pavilion g4-1121tx Notebook PC Drivers
    Just be sure to select the correct operating system from the drop down, and click next, which will refresh the list of drivers below.
    Let me know if that helped at all.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • No sound from speakers or headphones on my hp pavilion dv6-6c50us

    no sound from speakers or headphones on my hp pavilion dv6-6c50us.  Speakers are not muted and volume is up.  May have happened after a system update

    Hi,
    Try the following.
    Download the relevant IDT Audio installer on the links below and save it to your Downloads folder.
    IDT Audio Installer - Windows 7.
    IDT Audio Installer - Windows 8.
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • No sound from speakers 2-IDT High Definition Audio Codec

    1. ProBook 6550b
    2. Windows 7 Professional SP1
    3. No error
    4. No any changes in Operating System
    5. No sound from from speakers 2-IDT High Definition Audio Codec. I have sound from speakers only(!) when Skype starts or somebody calling me by Skype regardless headphones connected or not (Skype settings).
    All other time I can hear sound only from headphones regardless headphones(RTC) connected or not.

    Good Evening,
    Did you get this fixed I have exsactly the same issue? Two rebuilds and a new motherboard and Im still stuck
    Thanks
    Paul

  • New headset, but certain programs are transmitting sound through speakers and not headphones.

    Spoiler (Highlight to read)
    Hello,
    Hello,
    I just recently purchased a new headset for gaming but have been having some issues with it and the system sound. One major issue is when I call someone on skype, the sound from Skype or the call will go through the headphones, but any other audio comes out of the speakers. I have also notices that iTunes also does not function when I am in a call as well. Some examples would be if I were to want to watch a YouTube video while in a call, the sound would come through the speakers and not the headphones. However, I did find a fix for it. All I had to do was disable the main speakers and the audio was transmitted to the headphones. Another example would be if I wanted to run games via Steam (Garry's Mod, TF2, ect.), I wouldn't get any sound whatsoever from the game. Not through my speakers or headphones. With one exception, Garry's Mod volume I can hear through the speakers while in a Skype call, but I want the sound to come through the headphones. But with TF2, I get no sound whatsoever. If you need any more information about my issue, please feel free to ask. Thank you.
    This question was solved.
    View Solution.

    Hello @LayneStaley,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how certain programs are transmitting sound through speakers and not the headphones, and I would be happy to assist you in this matter!
    To ensure that your headphones are utilized when plugged into your notebook, I recommend following the steps below:
    1. Click the Start button
    2. Click Control Panel
    3. Click on Hardware and Sound (sorting the control panel icons by "category"), and then click on Sound
    4. Under Playback, you should see one or two speaker icons. One of them should already have a green checkmark next to it (which will be your notebook's main speakers). If the second Speakers icon is not visible, right-click in the list of devices and select Show Disabled Devices
    5. A second, disabled icon of "speakers" should appear. Right-click this icon and click Enable
    6. Select the newly enabled speaker device, right-click it, and select "Set as Default Device".
    7. Click Apply.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Audigy 2 zs - moved pc from one room to another and now no sound from speakers (headphones

    As the title says,
    I just completed moving my pc from one room to another. Low and behold I get no sound from speakers (just some stereo speakers with powered sub). I do get audio out of the headphones (fully disconnect headphones from front panel when attempting to get sound from speakers). I know this probably points to a faulty speaker setup but that's pretty straight forward and looks to be fine.
    Anyone encounter this problem before or have any suggestions?
    Thanks!

    Mr. Jefferson, Thanks for the quick response!
    A mystery!  Usually, it's easiest to have FiOS patched into your home's cable TV wiring, so I'm curious why you don't have a coax router that provides you with the ethernet (internet) jacks.  Some questions:
    Do you watch TV from some other source (like satellite or cable TV) but are using FiOS only for Internet?
    I have both fios tv and internet
    You said 2 cables are going from your router to a box in the wall.  What are the 2 ports labeled on the router?
    One of them is just the main "internet" port I guess you could say while the other is just one of the ports labeled 1-4 (plugged into #2 I believe)
    Is there any labeling on the jacks on the wall box?  On the other box in your room?
    On the wall box in this room theres labeling on the jacks on the wall box that says IN and OUT (in marker), while in my room there's the same box but with only ONE, unlabeled jack (I think there's supposed to be another jack but it seems to be closed/sealed off)
    Do you know where the Internet jacks connect to? Like a patch panel or box somewhere in your garage or near where your FiOS/cable tv/phone service is?  Somewhere these cables have to terminate.
    I believe they somehow connect to this box in my garage (did some research and I believe it's called the ONT? and there's another box below it which I believe is the battery)
    Hope this info helps!

  • A1000L IdeaPad No Audio Sound from Speakers

    Our IdeaPad A1000L was working great for a while, but now it will not produce sound from the speakers.  At first I assumed I somehow had it set to silent even though the volume bar was all the way up.  I reset all my audio settings.  Then I realized the audio works fine from headphones.  I did a full reset on the tablet, and still no sound from speakers -- only from headphones.  I have read a similar thread where it was suggested that this might be caused by damage to the headphone port, but I rarely use headphones, and don't think I'd ever used them before with this device.  Still, I tried jiggling the headphone thing around in there like suggested and it's still not working.  When I look in there with a flashlight, it looks exactly like the inside of the headphone port on our other IdeaPad.  Is there anything else I can check/try before taking it in for service?

    Hello rkrohatgi,
    Thank you for the details of the issue you are experiencing and the troubleshooting steps you have already taken.  It sounds like you are seeing a screen similar to this when trying to adjust the volume:
    I recommend the following steps for an issue like this (you can skip any of the steps you have already taken):
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the full article here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Clicking sound from speakers!

    I have problem with sound but this is strange one and i can't find solution anywhere... I am pretty good with computers and i usualy find solutions on internet when i have problem but this is something i can't solve by myself... My laptop is HP 355 G2 and i have Windows 10 installed on it but the same problem was on Windows 8.1 too... So after clean installation of Win10 the sound was good and worked normaly for 2-3 days and now i only hear a clicking sound from speakers when audio is playing but the strange thing is that when i pick up laptop from the table the sound start to work for few seconds and then the clicking sound comes back again, so i suspect that this has something to do with accelerometer which is built  in laptop for hard disc parking in case of drop or something like that... I tryed to uninstal/disable driver for accelerometer but windows install it again emidiatly after reboot, i tryed clean install few times and problem apears again and again... I just don't know anymore what to try to do in order to solve this so if anyone know anything about this please help... And i forgot to say that headphone jack work normaly and when i plug the headphones or external speakers in headphones jack the sound works but the clicking sound still comes out from built  in speakers... Thanks in advance and sorry for my English, it is not my native language and there is no support forums on my native language witch is Serbian...

    Bump

Maybe you are looking for

  • IPhone Problem Hardware and Software Overview

    Dear iPhone Users, over the time I myself have been using the iPhone for some months and discovered some hardware and aoftware problems, with perhaps some solutions to such problems. a) The "Dead-Flashlight" Error: This is an annoying error, which is

  • Just got a new Ipad and can't get computer to recognize it.

    I just got a new Ipad and when I hook it up to the computer it does not show up on my desktop or in itunes. And on the ipad screen it still is asking me to plug in the USB. I have tried 3 different ports, restarting both the computer and Ipad with no

  • %SI_DOCUMENT_NAME% in Edge 3.1 not showing document name

    We have a problem with the placeholder %SI_DOCUMENT_NAME% not being populated with the document name, instead it only shows the placeholder itself in the mail, i.e. "%SI_DOCUMENT_NAME%" How can I fix this?

  • Intunes will not install along with quicktime

    i download the latest version of itunes and quicktime and when i try to install it i get an error about how quicktime can not read c:/windows/installer/quicktime.msi cannot read so any help would be greatly helped i have totally removed quick time an

  • External operation in routing

    Hi In routing if I maintain controlkey with external operation, I have to enter the info record details. (I have to create info record without ref to material, the pur req/Pur ord created will be account assigned). When ever I create an order the sys