No sound in Virtual machine of Macbook after 10.5.1 update

Hi
I am using new macbook (C2D 2.2 GHz, 4G ram, 160 HDD, X3100 video) with Leopard.
When I installed virtual machine "VMware Fusion" to use boot camp windows partition, I could use boot camp windows as a full window(boot camp) and virtual machine(VMware Fusion's bootcamp partition use) fully.
However, after installing Leopard 10.5.1 update, I can't hear any sound from my virtual machine.
VMware Fusion is showing "Sound will not be available" !!!
So, I installed windows XP in virtual machine's image(not bootcamp).
BU, still no sound.
I think 10.5.1 update interfere virtual machine's sound driver or related driver.
Anyboy know this situation?

Peggy,
I didn't repair the permissions until I experienced the problems with Pages after the initial installation. After I did this, things worked fine. Like I said, after updating to 10.5.1 yesterday, the problem returned and after repairing permissions didn't get things back to normal, I reinstalled iWork '08.
Here's something odd. Even though I trashed the entire iWork '08, when I reinstalled, the installer told me that zero space was required to install iWork '08. So maybe there's some other disk issue involved?
The Repair Disk option is grayed out in Disk Utilities. There's an instruction to run the reapir application from a CD or DVD, but Leopard only has one installation disk and it doesn't have any independently running repair program on it.
Leigh

Similar Messages

Need To Share XP Virtual machine on Macbook Pro in Fusion

I have an XP Virtual machine that I need to share on our Macbook Pro. The problem is that even if I create it in shared folders, I can't share it with anyone but the user who created it. I've discovered that when I check the permssions, there is a "ghost" user called "Staff" and I can't change any of the permissions for "Staff".
I would appreciate any assistance that anyone can provide. As I'm in the early stages of building the VM, I can delete and recreate if necessary.

Vincentjuhhh wrote:
How much RAM do I need to run a virtual machine and also have a fast macbook pro that opens applications in 1 second?
That's like asking how many horsepower you need to go from 0-60 in under 6 seconds. If the vehicle you're driving (the virtual machine) is a Mack Truck pulling 15 Tons of steel, you need quite a few more horses than if you're talking about a F1 race car with a carbon fiber body.
This isn't a question that can be answered based on the information you've provided.
Reduce the resources allocated to the VM and see if performance of your Mac apps improves to an acceptable level.
Given the price of RAM these days, there's virtually no reason not to increase the amount of RAM you have to the maximum your computer will support.

Time Machine Disk borked after 2013-003 security update

I installed the 2013-003 update on the weekend, and conincidentally my Time Machine disk is now locked. I haven't installed anything else really, so this Security Update is the only change I've made in recent memory, which makes me think that it is the cause, or at least the exacerbating factor.
Background: I have a 27" iMac 3.4GHz / 16 GB (iMac 12,2) with running Mountain Lion 10.8.4. I have an external RAID array consisting of 2x 3 TB Seagate Barracudas in a Nexstar MX two-bay enclosure, with the enclosure hardware controlling the RAID. This has worked more or less flawlessly since last fall -- that is until this update. No raid errors from the enclosure -- as far as it knows the disks are in fine health.
After restarting following the update, I get a message that the OS has locked the Time Machine disk (my aforementioned RAID array) -- so I can read data from it, but I can no longer write -- I can no longer make backups. It mounted the disk, and suggested I use disk first aid to fix it, so I do.
Open Disk First aid, and set it to Verify. I get some strange errors. Don't take my word for it, here's the log:
2013-08-18 15:12:11 -0600: Disk Utility started.
2013-08-18 15:12:18 -0600: Verifying partition map for “JMicron H/W RAID1 Media”
2013-08-18 15:12:18 -0600: Starting verification tool:
2013-08-18 15:12:19 -0600: Checking prerequisites
2013-08-18 15:12:19 -0600: Checking the partition list
2013-08-18 15:12:19 -0600: Checking for an EFI system partition
2013-08-18 15:12:19 -0600: Checking the EFI system partition’s size
2013-08-18 15:12:19 -0600: Checking the EFI system partition’s file system
2013-08-18 15:12:19 -0600: Checking all HFS data partition loader spaces
2013-08-18 15:12:19 -0600: Checking Core Storage Physical Volume partitions
2013-08-18 15:12:19 -0600: The partition map appears to be OK
2013-08-18 15:12:19 -0600:
2013-08-18 15:12:19 -0600:
2013-08-18 15:12:33 -0600: Verifying volume “Term Meshern”
2013-08-18 15:12:33 -0600: Starting verification tool:
2013-08-18 15:12:34 -0600: Checking file system2013-08-18 15:12:34 -0600: Checking Journaled HFS Plus volume.
2013-08-18 15:12:34 -0600: Checking extents overflow file.
2013-08-18 15:12:34 -0600: Checking catalog file.
2013-08-18 15:13:08 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:13:08 -0600: (It should be 1 instead of 0)
2013-08-18 15:13:08 -0600: Incorrect block count for file permStore
2013-08-18 15:13:08 -0600: (It should be 1 instead of 0)
2013-08-18 15:13:08 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:13:08 -0600: (It should be 1 instead of 0)
2013-08-18 15:14:37 -0600: Incorrect number of thread records
2013-08-18 15:14:52 -0600: Checking multi-linked files.
2013-08-18 15:16:02 -0600: Checking catalog hierarchy.
2013-08-18 15:17:00 -0600: Invalid directory item count
2013-08-18 15:17:00 -0600: (It should be 89693 instead of 89695)
2013-08-18 15:17:02 -0600: Missing thread record (id = 9067450)
2013-08-18 15:17:02 -0600: Missing thread record (id = 9067458)
2013-08-18 15:17:02 -0600: Invalid directory item count
2013-08-18 15:17:02 -0600: (It should be 332226 instead of 332224)
2013-08-18 15:17:02 -0600: Checking extended attributes file.
2013-08-18 15:18:24 -0600: Checking multi-linked directories.
2013-08-18 15:18:25 -0600: Invalid parent for directory inode (id = 9067450)
2013-08-18 15:18:25 -0600: (It should be 19 instead of 18)
2013-08-18 15:18:25 -0600: Invalid name for directory inode (id = 9067450)
2013-08-18 15:18:25 -0600: (It should be dir_9067450 instead of temp9067450)
2013-08-18 15:18:25 -0600: Incorrect number of directory hard links
2013-08-18 15:21:13 -0600: The volume Term Meshern could not be verified completely.
2013-08-18 15:21:13 -0600: Error: This disk needs to be repaired. Click Repair Disk.2013-08-18 15:21:13 -0600:
2013-08-18 15:21:13 -0600: Disk Utility stopped verifying “Term Meshern”: This disk needs to be repaired. Click Repair Disk.
2013-08-18 15:21:13 -0600:
2013-08-18 15:21:19 -0600: Verify and Repair volume “Term Meshern”
2013-08-18 15:21:19 -0600: Starting repair tool:
2013-08-18 15:21:19 -0600: Checking file system2013-08-18 15:21:19 -0600: Checking Journaled HFS Plus volume.
2013-08-18 15:21:19 -0600: Checking extents overflow file.
2013-08-18 15:21:20 -0600: Checking catalog file.
2013-08-18 15:21:53 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:21:54 -0600: (It should be 1 instead of 0)
2013-08-18 15:21:54 -0600: Incorrect block count for file permStore
2013-08-18 15:21:54 -0600: (It should be 1 instead of 0)
2013-08-18 15:21:54 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:21:54 -0600: (It should be 1 instead of 0)
2013-08-18 15:23:24 -0600: Incorrect number of thread records
2013-08-18 15:23:38 -0600: Checking multi-linked files.
2013-08-18 15:24:50 -0600: Checking catalog hierarchy.
2013-08-18 15:25:48 -0600: Invalid directory item count
2013-08-18 15:25:48 -0600: (It should be 89693 instead of 89695)
2013-08-18 15:25:50 -0600: Missing thread record (id = 9067450)
2013-08-18 15:25:50 -0600: Missing thread record (id = 9067458)
2013-08-18 15:25:50 -0600: Invalid directory item count
2013-08-18 15:25:50 -0600: (It should be 332226 instead of 332224)
2013-08-18 15:25:50 -0600: Checking extended attributes file.
2013-08-18 15:27:12 -0600: Checking multi-linked directories.
2013-08-18 15:27:13 -0600: Invalid parent for directory inode (id = 9067450)
2013-08-18 15:27:13 -0600: (It should be 19 instead of 18)
2013-08-18 15:27:13 -0600: Invalid name for directory inode (id = 9067450)
2013-08-18 15:27:13 -0600: (It should be dir_9067450 instead of temp9067450)
2013-08-18 15:27:13 -0600: Incorrect number of directory hard links
2013-08-18 15:30:01 -0600: The volume Term Meshern could not be verified completely.
2013-08-18 15:30:01 -0600: Volume repair complete.2013-08-18 15:30:01 -0600: Updating boot support partitions for the volume as required.2013-08-18 15:30:01 -0600: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2013-08-18 15:30:01 -0600:
2013-08-18 15:30:01 -0600: Disk Utility stopped repairing “Term Meshern”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2013-08-18 15:30:01 -0600:
So since this, I can rarely mount the disk. When I can, I cannot unlock it to back up to -- although if it's awful as it suggests, I don't think I want to.
But, it all seems a little strange to me. This is RAID, I shouldn't have these problems, no? I mean, the disks are fine -- although if there was an error on the primary, enough time has passed that's been copied to the secondary by now, so I can't swap them.
Has anyone else had an external disk go T/U after this update? Is there some fix I'm missing? I have a new external disk on order (with Thundebolt) so if I have to rebuild my back ups, it won't take as long as this guy over USB, but I don't want to forgo the versions of the files I have no going back some 2 years.
Any insight? Is my backup borked, making me start over new and lose my back up history? Is there anyway I can recover this disk, outside of Disk First Aid / sending it to a data recovery place? Even do you think if I rolled back this update (if that's even a thing) would it set me back on track?
Thanks!

I had the same issue after a re-build of mountain lion on an older Macbook pro. I followed you link and instructions and it worked! Thanks wjosten

Azure Virtual Machine cannot connect to Internet addresses following update on 8/7/2014

I've got a Windows Server 2012 virtual machine running in Azure that prior to system updates that were rolled out last week could connect to Internet addresses such as Yahoo.com without issue. I do not currently have any virtual networks configured for this
Azure tenant nor have I modified any of its network settings, so the VM was making the connections with its default network configuration. On August 7, 2014 I rebooted the virtual machine to apply some required system updates to the operating system, and following
that reboot the VM could not longer connect to the Internet. I am able to lookup domains in DNS, but cannot ping those domains from the command line or open web sites via a browser.
I've released its IPconfig via the command line and rebooted the server multiple times, both from within a remote desktop connection and from the Azure Management Portal, but these actions have not resolved the issue.
Are there additional configuration steps I need to take to reconnect this VM to Internet sites, or has something changed which requires me to make further changes?
Thank you,
John
MCITP and MCTS: SharePoint, Virtualization, Project Server 2007
My books on Amazon: The SharePoint 2010 Disaster Recovery Guide and
The SharePoint 2007 Disaster Recovery Guide.
My blog: My Central Admin.

Just to close this out, I've been able to resolve the issue. It looks like somehow a Windows Update changed the proxy server settings in Internet Options on the server, and that was preventing traffic from successfully leaving the server. Once I removed
that setting, the issue was resolved.
MCITP and MCTS: SharePoint, Virtualization, Project Server 2007
My books on Amazon: The SharePoint 2010 Disaster Recovery Guide and
The SharePoint 2007 Disaster Recovery Guide.
My blog: My Central Admin.

Sound card cutting out and clicking after 1.6 firm update in windows

I don't know whats going on... but after I ran the firmware update 1.6 on my MBP, my sound card went crazy on the windows partition. The card will put out sound for awhile and then it will turn off and make very annoying clicking noises. I boot to the Mac side and everything is fine. It really ***** because I am a DJ and the number one part of this computer I use intensely is the sound card.... Help! I am going to call apple tomorrow but I think they will not help kindly in windows even with an apple care...

I had experienced this issue on my late 2007 MacBook Pro.
http://discussions.apple.com/thread.jspa?messageID=8136560&#8136560
Until this post, I had not heard of it on the new MacBook Pros.
I would guess that this issue has been caused by a driver conflict. As someone else had suggested, the Boot Camp drivers for the new MacBook Pros are in desperate need of an update.
Call Apple Support, and ask them to begin an investigation into this problem. Direct them to this thread. They will give you an investigation number that you can monitor.
Many of us have been asking Apple for updated drivers for Boot Camp. The more we call. The quicker Apple will resolve.
Other driver related issues for Boot Camp include the following link that I have noted.
http://discussions.apple.com/thread.jspa?messageID=8414578#8414578
Good luck, and let us know.

Client machine force reboot after apply window patch updated

I found all of client machines will force reboot after window patching updated via SCCM 2012. Have any options in SCCM 2012 can let users to choose reboot their machine after patching ? likely WSUS, users can suspend the reboot request. Pls advice.

The notification will happen automatically if ConfigMgr installs updates that require a reboot but a reboot is not initiated so there's nothing additional you need to do.
Note however that allowing users to choose this instead of forcing it is generally bad practice because the updates aren't truly installed until the reboot happens and there have been a couple of updates of the years that cause flakiness until the system
is rebooted also.
Why not allow the users to install the updates when they want up until a deadline and then force the reboot at the deadline (if one hasn't already been performed)? This gives the user the control over the process but also forces it to happen if the user
neglects performing it.
Jason | http://blog.configmgrftw.com

Why have my two machines slowed down after installation of latest update?

Both of our MacBooks slowed down and/or stopped in the middle of loading usual websites immediately after installing new version of Firefox. Since it's both computers, it must be Firefox gumming up the works. Help.

Since you installed system updates and software updates, run "Repair Disk Permissions" in Disk Utility, if you have not done so recently (after the installations).
In terms of the System Preferences Network pane, select Show *Network Port Configurations*. On the list of network services, make sure +Built-in Ethernet+ is at the top of the list. You can also uncheck services you are not using for networking, just in case there is a bug causing conflict.

Time Machine/Capsule failure after 10.5.7 update

Seems a lot of problems.
My time machine will not connect to the server, and I cannot open the time machine function in system preferences without it crashing. Have tried multiple reboots etc. Using the airport utility shows the time capsule to be functioning normally, and the internet works. I've also tried to connect via ethernet cable with no success.

[Using Time Machine and troubleshooting Time Machine issues|http://support.apple.com/kb/HT1770?viewlocale=en_US]
[AirPort Troubleshooting Guide|http://support.apple.com/kb/HT1401]
[Time Capsule: Initial backup is interrupted|http://support.apple.com/kb/HT1176]
Maybe these articles will offer assistance with issues you both are experiencing.
Installed updates can be found in System Preferences/software update/Installed Updates
Message was edited by: ryanka

Issue with VMware player - trying to install Windows 7 on a virtual machine

I'm currently using the basic version of VMware player (not the pro version)
I create a new virtual machine. VMware player automatically detects my Windows 7 bit installation disc
in my attached CD/DVD drive.
in the next screen, i select my operating system version and fill in my windows license key
then there is a progress bar with the title "creating disc" which takes about 10 minutes to complete
after installation, the virtual machine launches.
It says (white on black background)
Network boot from Intel E1000
PXE-E53: no boot filename recived
PXE-M0F Existing Intel PXE Rom.
Operating system not found.
on the bottom of the virtual machine window it says "easy install is installing Windows 7 64 bit",
however my CD/DVD drive is not spinning and there is no progress leaving this alone for 30 minutes.
I then rebooted the Virtual Machine and went into the bios to update the boot order
with the CDrom 1st, then the hard drive and then the network.
I still get the same errors.
I also tried the same process with my Windows Xp installation disc, same issues
Any advice would be appreciated

Jmattson, good idea I'll try the manual install. user "aka", I did check the bios, intel virtualization is enabled.

Lion 10.7.4 issues with Virtual Machines

Hi,
I'm having lot of issues with virtual machines (both Parallels and VMWare)
since having update to lion 10.7.4.
I make myself:
If I switch on Mac OS a run any vitrual machine software
I can run Windows XP and Ubuntu at same time with no issue and very fluently.
But, if I switch on Mac OS and start using Eclipse, Safari 5.2 and other production stuff and
want to use vmware or paralles
they become unusable even if I quit all the tasks ans "purge" memory.
(eg: if i click start button on windows I have to wait seconds before the start menu pops up)
Any Idea?
I have MacBook Pro 13 Unibody mid 2009 with SSD Drive AND 4GB of RAM
and I had no such issues with Lion 10.7.3

alex_75 wrote:
As you wrote before, virtual mchines need big chunks of contigous RAM and
2,5 GB of free RAM wuold have enough ammount of such a RAM.
No, it wouldn't. 2.5 GB of free RAM could consist of 5 chunks of 500 MB of contiguous RAM, separated by RAM allocated by other processes.
Here is a hypothetical memory map. Assume a is application memory, o is operating system memory, and - is free memory.
boot:           oooo--------------
run app1:    ooooaao-----------
run app2:    ooooaaoaaaaaaoo---quit app1:   oooo---aaaaaaoo---
Maybe there is some issue in the way 10.7.4, in some perticolar situations, handle the process of freeing RAM.
What you can't accept, and I don't know why, is that before the update to 10.7.4 everithing was fine.
I don't know why you don't beleve me.
There is nothing in the 10.7.4 update description that mentions a re-write of the virtual memory system. http://support.apple.com/kb/HT5167
I just worte here to see if someone could give any advice to do further invesigations.
I know the price of upgrading RAM but I think that this would be a "microsoft like" solution
and I'm trying to find what service or task or whatever is creating this issue.
The only thing "Microsoft like" about buying more RAM is the fact that you need it to run your Microsoft operating systems. It has been this way as long as I can remember. I upgraded my MacBook to 4 GB RAM in 2008 just so I could run Windows more easily.
Perhaps you have your virtual memory settings too high. Depending on what you are doing in the VM, you may not need the default settings. XP will run low-intensity tasks with a 500 MB VM size. It will run just about anything in 1 GB. Linux should run fine in the same range too.

Oracle Virtual Machine Connect by Prior Problem

Hi Friends ,
In my company we have virtualization. this is new in our organization.
oracle image have been taken and put in to virtual machine.(vmware).
after that, procedure which has "connect by prior" start to create wrong output.
please help us on what to do to correct problem given above.
(my oracle version 10g)

JAVAMAN2 wrote:
simple sample:
SELECT ROWNUM+2000-1 AS YIL FROM DUAL CONNECT BY ROWNUM <= 2010-2005 ORDER BY ROWNUM+2000-1 DESC;output on virtual machine
2009,2008,2007,2006,2005
output on real world
2010,2009,2008,2007,2006,2005If that is really the output from that query, then both your virtual machine and your "real world" are broken. On all 4 versions of Oracle I have available, I get:
SQL> SELECT ROWNUM + 2000 - 1 AS YIL
2 FROM DUAL
3 CONNECT BY ROWNUM <= 2010 - 2005
4 ORDER BY ROWNUM + 2000 - 1 DESC;
       YIL
      2004
      2003
      2002
      2001
      2000Which is what I would expect given that 2010 - 2005 = 5.
Perhaps if you showed an actual cut and paste from a sqlplus session on each machine someone might be able to help, however, I'm inclined to agree with sb92075 that it is a data issue in your real query.
John

Hyper-V Virtual machine disappeared

Hello,
I am running Windows Server 2008 R2 SP1. I have the Hyper-V role installed with to virtual machines. I rebooted yesterday after windows updates loaded and now one of my virtual machine have disappeared. I have run through hours of technet
forums trying to find the answer and have come up empty.
I checked ProgramData\Microsoft\Windows|Hyper-V\Virtual Machines and the symbolic link is gone. I tried to recreat it using the mklink command, but every time I recreate the symbolic link to the .xml it comes back as a link to a file folder.
I checked the acl on the virtual machine .xml on my D: drive and the GUID SID is missing. I also tried to add it back via the iacls command but it doesn't seem to exist.
After all that, I decided to recreate the entire virtual machine, but now I can't create virtual machines. I get teh following error:
"Failed to create external configuration store at 'folder path': A required privilege is not held by the client. (Virtual machine ID 0x80070522)"
After that error I opend azman.msc and verified that the initalstore.xml has the administrators group in it.
I do not know what else I can do from here. Any help would be appreciated.

Hi Jumar2,
This will help others who are fighting with similar issues.
Thanks for your sharing .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

VMX20 - Limit virtual machine log file size and number

Hi all,
Here is parameter file
log.rotateSize=1000000
log.keepOld=10
that I have apply on virtual machine VMX. After I run the compliance checker again and it still showing fail.
I also have try restart the virtual machine machine few time but the log file keep increase.
For my understanding if we apply this parameter setting once the virtual machine log file over 1,000kb or 10 log file the new log file will replace the old one, correct me if Ii wrong.
Here is my question
1. Did the parameter file have restrict on any version of VMware?
2. If the log file less than 1,000kb and it already have 10 log file, so the new log file will still replace the old log file?
Thk.
Best regards.
Wong Pak Lian

Hi a_nut_in,
The problem have been solved in VMware vsphere version 5 with compliance checker for vsphere 5.0.
But under VMware vsphere version 4 I have found out the parameter is ok and workable but the results is still showing fail, will this is software bug?
Thk.
Best regards.
Wong Pak Lian

Error creating Virtual Machine from Oracle VM Template Input/output error

Hi,
I'm creating a virtual machine from the Oracle VM Template (OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM) I downloaded from eDelivery. I keep getting this error.
=========
Check Agent Version
Check Address and NetworkType
Register virtual machine img
Register virtual machine geninfo
Register networks
Register virtual disks
CopyFromTemplateAsync:Call agent
CopyFromTemplateCallBack
CallBack:end-success:end:failed:<Exception: ['dd', 'if=/var/ovs/mount/ECE4B252180944D18EE19A4F6C9EC3F0/seed_pool/OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM/System.img', 'iflag=direct', 'of=/var/ovs/mount/ECE4B252180944D18EE19A4F6C9EC3F0/running_pool/39_E_BIZ_1213_APP/System.img', 'bs=1M'] => dd: reading `/var/ovs/mount/ECE4B252180944D18EE19A4F6C9EC3F0/seed_pool/OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM/System.img': Input/output error
4872+0 records in
4872+0 records out
5108662272 bytes (5.1 GB) copied, 205.557 seconds, 24.9 MB/s
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXUtility.py", line 354, in utl_cp_vm
run_cmd(args=cmd)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd
raise Exception('%s => %s' % (args, err))
Update virtual machine status:Error
========
After endless searches there doesn't seem to be a lot of information out there.
Any help will be appreciated.
regards
Dave

It looks like your disk drive may have bad sectors on it, and when the dd copy reaches those bad sectors, it reports an error. Check /var/log/messages on the OVM server to see if it reports disk errors.

XP mode on Win7 Pro x64, windows xp update/svchost pushes CPU to 100% in virtual machine.

Installed xp mode on a win7 pro, dell 490 with xeon cpu. The install goes without error, win xp virtual machine loads nicely, I do not enable updates at the config during 1st startup. When Automatic update is enabled later control panel shows svchost is
pushing the cpu to 100% and the update never completes.

Hi,
1. try to run XP in safe mode by F8
2. then change Automatic update service to Manual or Disable.
3.boot XP into normal mode and see weather its still 100%.
thanks
How do you start safe mode when running XP Mode in Win 7? When you start XP Mode, the BIOS is hidden. By the time the XP Mode window comes up, its already loading the Windows desktop.

No sound in Virtual machine of Macbook after 10.5.1 update

Similar Messages

Maybe you are looking for