No Sound in Vista Bootcamp, Resolution stretched.. Ok in VMware full screen

I have vista home premium installed on my iMac. I am running 4gb of ram, when I'm running VMWare in full screen the resolution is fine and so is the sound But when I run vista with bootcamp, no sound and my res only goes up to 1400 by 1050 not enough for my 20 inch iMac.
I havnent been able to find any info on either of these problems.

I believe *[_THIS IS THE LINK_|http://discussions.apple.com/message.jspa?messageID=7038591#7038591]* to his answered post.
Axel F.

Similar Messages

Microphone doesn't work and screen resolution doesn't change to full screen

my laptop is Toshiba Satellite M300, i dont know the series, this is information from bottom label
TOSHIBA M300
T660 2048 320 14WC DMD agnBT 6C VBX 1Y
PSMDCL-08T010
69080277W
after i install windows 7,
1.why the microphone doesnt work???
2. why the sreen resolution not full screen when i play games??(in vista no proplem about the screen resolution)
thank you..

How did you upgrade? Clean?
Did you get your drivers here?
-Jerry

Switchable Graphics on Vista x64 - Aero is messed up after full screen video or sleep

http://i41.tinypic.com/v7rrpu.jpg
It happens all the time -- after exiting a windows media player, after resuming from sleep or hibernation...
This is a CLEAN new FRESH vista Business x64 install - just 10 hours old.
It has all the newest drivers and software, installed directly from System Update.
I had to reinstall the system because of this problem; turns out it is haunting me, on and on.
When using the ATI graphics the problem disappears, however the ATI graphics are loud and consume too much power.
Additional software installed: Mozilla Firefox, Microsoft Office 2007 with Service Pack 1, NOD32 3.0 and Skype. No additional applications! And i hardly doubt these are the ones causing the problems!
If anyone has a clue about this problem, please share!!! And yes, this is a fresh, clean install (as a matter of fact - not for the first time), the video drivers are the most recent, DirectX is updated. Reinstalling the drivers doesn't fix the problem (tried it on my last fresh install).
On Vista 32-bit this didn't happen, however i have 3GB RAM and Vista x32 allocated only 2,5 GB and I had to upgrade to make use of my full memory.
Windows (vista x64 Business SP1) has all the important updates installed;
PC Doctor won't find any problems with the video card - i ran all the possible tests and they all got a 'pass'.
Message Edited by toshe on 02-20-2009 04:37 PM

ehh that kind of sounds like a screen problem because that happened to me and i went to 2 radio shacks 4 apple stores and thaey all said you have to replace it and its not as expensive

Resolution Stretched/Screen Viewing Problem

I was just cleaning my imac 27" and cleaned the keyboard while its on (silly i know ) and my screen size seems to have stretched. My resolution is at the maximum 2560 x 1440 but i have to move the mouse cursor up and the screen moves so i can see the file/edit/view bars at the top. Then to get back to the dock at the bottom the screen slides down (same left and right as well). How do i get my resolution back to automatically fit the screen. Its really annoying me now
Thanks
Max

Den.thed has probably nailed it, but another possibility is that the Zoom function became enabled via a keyboard combo. To check for the, open the Unversal Access pane in System Preferences; select the Seeing item in the top area. If Zoom is active, and you do not want that feature, turn it off. If this is the cause, the screen will immediately fix itself.

Help! Can't connect to wifi under Vista (bootcamp)

I have no problems connecting under OS X but not under Vista (bootcamp). I checked all the settings in my Belkin router and can't find anything that would cause this. I even tried turning off the security settings, disabling wep/wpa; and even added the mac addresses to the mac control.
However, I was able to connect to the neighbor's unsecured wifi.
Please help! Thanks

nvm, i found the fix...i searched the forum and found a thread in which the poster suggusted a driver download.
I downloaded this driver and it works perfectly....**** bootcamp!

No sound under Vista on Satelite U300 - waranty question?

Hi
I have some big problems with sound. I tried a lot of solution, but nothing. So, this is the problem...I have no sound under Vista.
1. Sound (volume) icon showing, that "no audio output device is installed".
2. I checked System tolls-system information, under _Components - Sound device_ - nothing, no info. _Components - problem devices_ - also nothing. No problem device at all.
3. In device manager - hardware with Sound, video and game controllers - missing. Even then Im checking all other devices, such System devices, or unknown device, it's also nothing. No devices even with yellow question mark. Its seemed like systems run ok.
Very Strange.
Of course u can say, maybe I didn't install sound drivers, but drivers are installed. Download a newest driver from Realtek.
But...sometimes, I have sound. Usually sound is missing. Such thing like restart doesn't help.
One more thing, then I have sound (sometimes it happens), the sound can disappear during my work with computer.
Maybe it's warranty question? I should go to repair centre?

I tried to install Vista using recovery image about 10 times. It doesn't help. Even after that it shows me same mesage. Download newest drivers from realtek, and still nothing. The main thing, that confusing me, it is device manager. No sound hardware at all. It's seems like everything working ok. Even system information show that i dont have installed sound.

No sound under Vista

I can't seem to get sound under Vista. Well, I get sound when I select USB headset, but I can't get my iMac's built-in speakers to be recognised. Help!

It would help if you posted under the appropriate forum, and more details about what you are running to get Vista.
First off, your profile says iBook, but you are talking about an iMac.
Vista can't run very well if at all on an iBook, since iBooks only support emulators and won't support Boot Camp at all. The iMac, if it is an Intel Core iMac, will run Boot Camp. So are you running this under Boot Camp on an iMac Intel Core Mac?

P6N SLI Plat and realtek onboard sound in vista ?

Ok for everybody who's running the onboard sound in vista I have a question for you. In your realtek settings do you have a multiband eq to adjust settings or is everything just a preset to choose from? I dl'd the latest realtek drivers 1.67 and no multiband eq, only thing is presets that you must pick from to shape sound. I'm looking for a multiband eq so I can adjust each frequency myself. Thanks.

Quote from: Puffnstuff on 26-May-07, 05:29:13
Ok for everybody who's running the onboard sound in vista I have a question for you. In your realtek settings do you have a multiband eq to adjust settings or is everything just a preset to choose from?
Everything is just a preset to choose from. I could not find an EQ anywhere. I was actually able to get some nice sound out of the onboard chip. First of all I put a check in "speaker fill". This alone will get sound in all speakers on a surround sound system. Second, I went into "sound effects" and "Room", and then selected "live". Again, this alone will give you sound in all speakers. And third, I set up "room correction" according to my speaker layout. All these combined have produced beautiful sound through my Z680 sound system. Is it true surround sound? I have no idea, but I like it.

Full screen resolution in win7

I have a brand new MacBook Pro 15", and a 4 year old 30" Cinema display.
In Mac OSX, the Cinema display shows full 2560x1600 resolution. However, when using windows 7 (64) via Bootcamp, the Cinema display only shows 1280x800 at full screen. When I set the resolution to 2560x1600, the visible screen shrinks to the middle of the Cinema screen, with a broad black border all around.
I have updated my software with the Mac updater, and have installed the drivers in Bootcamp while the Cinema display is attached to the MacBook.
How do I get the Cinema display to show full 2560x1600 on it's entire screen in Win7?
Any help would be really appreciated. Thanks.

Thanks for comments.
I tried to run some old Win95/98 games. Some of them can be set to run in Windows mode (like Sanitarium), but some can't (like Neverhood).
I'm just wondering in PC world normally we can set stretch mode in BIOS. for example:
Stretch to full screen
Stretch but keep aspect ratio
No stretch (in native resolution)
But I guess there is no such BIOS thing for iMac. I had done some search, and found some people have the same question as mine. Some said can be done by changing setting of display adapter driver (for Nvidia one). My iMac has ATI, and I had installed ATI control panel, but can't find any setting about it.

Hotshot video conversion resolution? No full screen ever?

I have the Pantech Hotshot. The screen resolution of the phone is 400wide x 240high. When I convert a video to that resolution the phone always reduces it to 320 wide instead of filling the screen to the 400 wide and makes the 240 high even smaller. If I convert the video to a larger size it makes the video on screen even smaller. The only video resolution that works decent is 320x240 which fills the screen top to bottom but leaves black bars right and left. If its the phone software that's doing it than what's the point of having a screen 400x240 if you can never view a video in that screen filling resolution? And the video player has no option to zoom or fill the screen. What is the best resolution to convert a video to view on this phone to fill the screen completely like every phone I've ever had was able to do? Thanks

"The screen resolution of the phone is 400wide x 240high. When I convert a video to that resolution the phone always reduces it to 320 wide instead of filling the screen to the 400 wide and makes the 240 high even smaller. If I convert the video to a larger size it makes the video on screen even smaller."
I think you have not found the solution to your situation. We have a non-smartphone (Samsung u370) that, like your phone, has a screen resolution of 400x240 and, like your phone, seemingly won't play a video at the correct resolution when the video is a resolution that exceeds 320x240.
On this u370 phone while playing a video, there are icons on the screen one of which looks like an "X" with arrows at the end of each of the ends of the "X". Tapping this icons causes the video player to expand the video so that now it's playing at the full horizontal resolution of 400.
The video player on our flip phones works the same way. Our LG vx8370 has a 320x240 screen. When I play a 320x240 video, initially the video players plays the video at a resolution of 240 x something. When I push up on the directional pad, then the phone expands the video and then plays it at 320x240.
One more thing. My experience on two different Verizon non-smartphones is the same when it comes to playing widescreen videos -- when I play a video of a resolution such that I have to select the option to expand the video so that the video is playing at the full horizontal resolution of the video, the video player won't show the correct vertical resolution of the widescreen video. Instead, the video player stretches the video to fill the vertical resolution of the phone's screen. While that is tolerable to me for a 16x9 video, my preference is that I find a stretched 2.35:1 video to look unwatchable. The only way that I can preserve the aspect ratio of the widescreen video is to use a video conversion tool that lets me pad the video with blank lines. FFmpeg and mencoder are two tools that have this padding option. So this is what I came up with. Suppose I have a 16:9 widescreen video. The video would need to be about 400x224. Since the video player software on the Verizon non-smartphones will play incorrectly by showing a video stretched to fill the whole screen, I'll need to use the padding command in ffmpeg and add 16 blank lines -- 8 lines above the video and 8 lines below the video. The ffmpeg command for that is
scale=400:224,pad=400:240:0:8
ffmpeg will scale the video to 400x224. The pad command tells ffmpeg that the converted video will have a total of 240 vertical lines of which 224 are the video and 16 of which are blank lines. The "8" tells ffmpeg how to center the video -- there'll be 8 lines above the video and 8 lines below the video.
Since ffmpeg uses a command line interface, two free graphic user interfaces for ffmpeg that I like are Avanti and Pazera:
http://www.videohelp.com/tools/Avanti
http://www.pazera-software.com/products/audio-extractor/
Pazera uses an older version of ffmpeg which can be updated after installing pazera by, if I remember correctly, just deleting the older ffmpeg file and replacing it with the new one.

Illustrator CC 2014 documents won't go full screen (and the UI is extremely low resolution)

Illustrator CC 2014 does not seem to be running correctly. My documents will not go full screen. As you can see, there is a huge white gap surrounding the entire document. I cannot grab the corners or sides to stretch it to full width. On top of this, the whole interface is blown up and looks very low resolution.
Compare this to a screen shot of the previous version on the same computer:
The document will expand to the full width available and the the UI looks much better. Does anyone know how to fix this? I am using Windows 8.1

Since you still haven't got your data from the drive(s). I would advise performing a Windows installation without formatting the drive... I don't like this solution but at this stage you have probably tried everything else.
Use a Windows 7 Reinstallation DVD when installing ensure you select...
Select Custom: Install Windows only (advanced)
If you do not select any of the drive options and simply highlight the largest partition and select next:
Windows will dump all the old installation files in the Windows.old folder

Bridge - How to view image in full screen resolution

In Bridge - How to view an image in full screen resolution and not as a Preview (Space bar), like in Lightroom (F), Photoshop or ViewNX 2 ?

The size of the Bridge Preview window will always be the absolute limit of the image display in Bridge. Maybe I am not following you. Sorry

Need help to play a DV file in full screen mode w/o losing resolution

I just finished a 20 minute film using iMovie, and in order to share it, I created a Quicktime DV File using the Full Quality mode. However, when I play the obtained Quicktime file in full screen, the images become blurry and the titles are unreadable, so I am forced to sticking to the standard size (which is relatively small).
I need to project this video THIS SAME WEEK on a screen in front of a large crowd and the largest screen size for Quicktime to avoid pixelation is very small (1/6 of my screen).
Is there any way in which I can get a larger resolution DV file than the one iMovie creates? How can I share this with the audience w/o having to project it from the original iMovie file?
HELP PLEASE...!!!!! I am desperate, so any urgent advice will be greatly appreciated. And please note I am a novice at iMovie (first time I used it). Any help to increase the resolution quality of my DV file will be EXTREMELY HELPFUL.
Thanks a lot in advance.

Any help to increase the resolution quality of my DV file will be EXTREMELY HELPFUL.
For faster editing iMovie 08 & 09 uses single-field processing. This means every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses all of the image, I think you will find it looks better.
iMovie 06 and iDVD 09 is a terrific combination.

Remote Desktop Connection Not Going To Full Screen on EIZO MX340 Monitor 1536x2048 Resolution

I am using a EIZO Rx-340 as a secondary monitor. So far I am only able to get into full screen by using Ctrl-Alt-Fn-Pause but it does not change the resolution. It does not help to move the slider to large. There is a black space at the top and bottom
of the display.

Hi,
Please take a try with the steps below:
1. Start "Remote Desktop Connection".
2. Click on "Options".
3. Click on the "Display" tab.
4. On "Display configuration" settings, you can change the "Remote Desktop Connection" display by moving the slider from "Small to Large".
5. By moving the "Slider" all the way to large, the display settings will automatically set to "Full Screen".
Here is the screenshot:
Also please take a check if the monitor itself is configured well.
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Lack of All format playable Video player with Full Screen STRETCH feature

I am a big fan of Nokia and i know Windows phone is the world best smart phone.im using Lumia 820. but in my highend Lumia devices lack of a
All format playable Video player (like mkv etc.)officially from Nokia or Microsoft.pls this is very important thing for all Lumia user for HD movie experience.pls update current video player.now I'm using Moli player but there is 1
vital feature is missing...this is Full Screen STRETCH...when i play movie using Moli player on my phone screen upper and lower portion appear black bar.It mean Ascept ratio not match.This is very important for full screen movie exp.But this
feature is also available on Android MX player.
So,I request you please update current video player with
Full Screen STRETCH feature for windows phone user.Thank you.

Hello,
You should ask in the
Windows Phone forums on the Microsoft Community forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

No Sound in Vista Bootcamp, Resolution stretched.. Ok in VMware full screen

Similar Messages

Maybe you are looking for