NO SOUND IN WINDOWS, YES IN LINUX... HP620

Hello everyone.
I have problem with my sound/sound card.
My notebook is HP 620, product number WS730EA#BED, OS Windows 7 32bit.
Audio driver is IDT.
This notebook has HDMI outport and couple days ago I connected it with my Toshiba TV, which you can connect with HDMI cable.
So I connected notebook and TV and there was picture but not sound.
In sound options I made Digital Audio (HDMI) as a default device, so I can have sound on TV, and there wasn't any sound. I restarted my notebook and there was the same problem - there wasn't sound on TV again.
I disconnected notebook from TV. There wasn't sound on notebook either. As a matter of fact there is no sound to this day.
In IDT audio control panel everything is muted and it's impossible to unmute speakers or headphones.
Device Manager doesn't see problems with soundcard. It says that everything is OK.
On speaker icon is red x and says "no speakers or headphones are plugged in". When I troubleshoot it, it can't fix it and it says that it is disabled.
I tried with updating the drivers - doesn't help.
Uninstalling the drivers and reinstalling it - doesn't help.
In control panel -> sound says that HDMI is not connected (you can't disable it), speakers are default (but you can't configure it) and headphones are default (you can't configure them also). When I go to the recording devices the sound control panel just freezes....
So I thought that problem is with the sound card and I bought the external USB sound card. In BIOS I disabled the integrated sound card. So I installed the external sound card. Everything installed like as it should be. The notebook recognizes the external sound card and says that everything is ok, but again I have red x on sound icon and again I have no sound via external sound card. I rebooted the notebook, same problem.
So integrated or external sound card - I have no sound. Nothing helps, I tried everything to repair it, but it doesn't help.
PLEASE HELP ME !
THESE ARE PROBLEMS IN WINDOWS, WHEN I AM IN LINUX UBUNTU I DO NOT HAVE THESE PROBLEMS ! PLEASE EXPLAIN

You can begin by checking for drivers for the chipset, and for listing your Mac in your profile and question, as it would vary - and you'd get a more direct answer.
If you have not yet run the Apple setup off OS X DVD (while in Windows) to get Boot Camp 3 installed, that of course would be first thing to do. Sometimes 3.1 doesn't help and can make matters worse.
Use Device Manager to update, rollback, uninstall drivers also, and to see what drivers you are using or need.
But knowing what Mac is first.

Similar Messages

No sound from windows 7 on bootcamp

I bought my lovely brand new imac, done all the updates and all is good, I installed windows 7 on bootcamp but cannot not get any sound from the windows, yes I get sound while running the mac but when I boot to windows 7 i hear nothing.
Now the meters that should pop up and down do that so there is sound there I just cant hear it, I have gone without sound for 3 months now and its driving me mad.
I have been to various sites and downloaded high definition drivers etc but still no luck, any ideas?
Regards
daz

You need to install your audio driver yourself, which would be RealTek.
http://www.realtek.com

No sound with Windows 8, HP G70 Notebook PC

No sound after Windows 8 install. tried all suggestions I can find. Works in Linux.Is this ditch 8 and revert to 7?
This question was solved.
View Solution.

SOLVED!!!!!!!!!!!!!!!!!!! Dont ask me why.Press windows key+r type msconfig press enter click boot tab then ADVANCED OPTIONS tick maximum memory reduce memory slightly click apply save restart.
RESTARTS WITH SOUND

Install PT8.53 with Linux Issue: Windows NetMgr and Linux NetMgr

Folks,
Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Dabase 11gR1. OS is Oracle Linux 5. I have installed JDK7, WebLogic 10.3.6, Tuxedo 11gR1 and PeopleTools 8.53 successfully into Oracle Linux 5.
I have been setting up PeopleTools8.53 Database. Because the Install Wizard has problem, I set up PeopleTools 8.53 Database manually using Oracle starter database instance PT853. I have run the following scripts:
1) utlspace.sql
2) dbowner.sql
3) ptddl.sql
4) psadmin.sql
5) psroles.sql
6) connect.sql
Then, we need to run Data Mover script in a Windows Client machine to populate PeopleTools Database instance PT853 in Linux Sever machine. I have installed Oracle Database 11gR2 client for 32-bit Windows in my 64-bit Windows XP Virtual Machine. Now, I confront 2 VMs' connection issue as below:
In Linux Server Machine Net Manager:
Service Name: PT853
Connection Type: Database Default
Protocol" TCP/IP
Host Name: localhost.localdomain
Port Name: 1521
Listener: LISTENER
Protocol: TCP/IP
Host: localhost.localdomain
Port: 1521
I test the Service PT853 using UserID "SYSADM" and Password "SYSADM". The connection is successful.
In Windows Client machine, the information in Net Manager is the same, but the connection is not successful. Its details are as below:
Net Service Name: PT853
Protocol: TCP/IP
Host name of Database Machine: localhost.localdomain
Port Number: 1521
Database Service Name: PT853
Connection Type: Database Default
I test the Service using UserID "SYSADM" and Password "SYSADM" that are the same with Linux, but get this error: TNS: listener does not currently know of service requested in connect descriptor.
My questions are:
Do we need to do something to connect Windows XP with Linux at first ? If yes, How to do it ? If no, how to solve the above issue ?
Thanks.

Folks,
Hello. Thanks a lot for replying.
Regarding PeopleSoft networking, I have done Configuration Manager to enable Data Mover and Application Designer to login into Database Instance PT853.
Regarding 2 Virtual Machines (Windows XP and Oracle Linux 5) connects with each other, I have done the following:
First, I follow this tutorial http://www.vmware.com/support/ws5/doc/ws_devices_serial_2vms.html to configure 2 VMs for Windows 7 Host.
Second, in Windows XP Oracle Database Client Install Directory, the file "tnsnames.ora" has one entry that is the Service Name in Net Manager. In Linux Oracle Database Server install directory, the file "tnsnames.ora" has no entries because I installed Oracle Database Server with the starter Database instance PT853.
I have tried to test 2 VMs in the way as below:
In Linux, [user@localhost ~]$ping WindowsHostName
Its output: unknown host WindowsHostName
In Windows XP Command Prompt:
C:\ping localhost.localdomain
Its output: pinging localhost.localdomain 127.0.0.1 with 32 bytes of data...
Reply from 127.0.0.1: bytes=32 time=2ms, TTL=128
It replies a few times and then disconnected by itself. It seems that Windows XP is pinging itself and not Linux Server. The hostname of Linux Server is "localhost.localdomain" as well. It's a kind of confusing to me.
From the above infromation, we can see 2 VMs cannot connect with each other. Net Manager in Windows XP Oracle Client cannot connect its Service PT853.
I don't understand how to connect Oracle Client in Windows with Oracle Database Server in Linux. Can any folk help to solve this issue ?
Very grateful in advanced.

How to upload file from one machine (windows) to another (linux)through cre

How to upload a file from windows platform to linux platform.
on both platforms sun app server is running.
from creator is there any methode to open ftp port and upload

http://www.google.com/search?q=jdbc+blob
Blob processing varies between databases; see also examples for whatever database you are using, e.g.
http://www.google.com/search?q=jdbc+blob+oracle
If you are storing text data instead of binary data, replace "blob" by "clob" in the searches.

Unable to connect to Oracle database running on Windows machine from linux.

Hi,
I'm not able to connect to oracle database running on Windows machine from Linux machine. I'm geting the below mentioned error. I have given below the code I used to connect to database and database propertes.Do I need to use any specific driver?
Please help me.
Thanks,
Sunjyoti
Code :
import oracle.jdbc.pool.OracleDataSource;
import java.sql.Connection;
import java.util.*;
import java.sql.*;
import java.io.*;
class try2{
public static void main(String args[]) {
try {
          System.out.println("hi");
// Load the properties file to get the connection information
Properties prop = new Properties();
prop.load(new FileInputStream("/home/sreejith/EDIReader/Connection.properties"));
// Create a OracleDataSource instance
OracleDataSource ods = new OracleDataSource();
System.out.println("prop is "+prop);
configureDataSource(ods, prop);
Connection conn=null;
// Create a connection object
conn = ods.getConnection();
     System.out.println("Connection is"+conn);
// Sets the auto-commit property for the connection to be false.
conn.setAutoCommit(false);
} catch (SQLException sqlEx){ // Handle SQL Errors
System.out.println("In exception "+sqlEx);
} catch(Exception excep) { // Handle other errors
System.out.println(" Exception "+ excep.toString());
private static void configureDataSource(OracleDataSource ods, Properties prop) {
// Database Host Name
ods.setServerName(prop.getProperty("HostName"));
// Set the database SID
ods.setDatabaseName(prop.getProperty("SID"));
// Set database port
ods.setPortNumber( new Integer( prop.getProperty("Port") ).intValue());
// Set the driver type
ods.setDriverType ("thin");
// Sets the user name
ods.setUser(prop.getProperty("UserName"));
// Sets the password
ods.setPassword(prop.getProperty("Password"));
Connection properties :
# Your Database Connection details
HostName = 10.20.3.19
SID = EDIREAD
Port = 1521
UserName = dbuser
Password = dbuser
Error I'm getting is
error while trying to connect with odbc datasource
[root@iflexpau2217 EDIReader]# java try2
hi
prop is {HostName=10.20.3.19, Password=dbuser, UserName=dbuser, SID=EDIREAD, Port=1521}
In exception java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Also I tried to connect with weblogic JDBC driver
Code is here:
import java.io.BufferedReader;
import java.io.ByteArrayInputStream;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileReader;
import java.io.IOException;
import java.sql.Blob;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.SQLException;
//import com.entrust.toolkit.util.ByteArray;
public class trial{
     public static void main(String args[]) throws IOException{
          System.out.println("hi");
          Connection p_conn = null;
          PreparedStatement xml_insert = null;
          try {
     // Load the JDBC driver
               System.out.println("hi2");
     // String driverName = "oracle.jdbc.driver.OracleDriver";
String driverName = "weblogic.jdbc.oracle.OracleDriver";
     System.out.println("hi2");
     Class.forName(driverName);
     // Create a connection to the database
     String serverName = "10.20.3.19";
     String portNumber = "1521";
     String sid = "EDIREAD";
     //String url = "jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" + sid;
String url = "jdbc:bea:oracle://10.20.3.19:1521";
     String username = "dbuser";
     String password = "dbuser";
System.out.println("connection is:"+p_conn+"user name is"+username+"password is"+password);
     p_conn = DriverManager.getConnection(url, username, password);
     System.out.println("connection is:"+p_conn+"user name is"+username+"password is"+password);
          xml_insert=p_conn.prepareStatement("insert into PRTB_SUBUNIT (SUBUNT_ID,SUBUNT_SUB_UNIT,SUBUNT_PHYUNT_ID) values (?,?,?)");
          //InputStream in=null;
          File l_file=new File("/home/sreejith/EDIReader/propertyfiles/inputfile/BUG_10802_ES_CSB19_68.txt");
          BufferedReader input =null;
          input=new BufferedReader(new FileReader(l_file));
          String line = null;
          StringBuffer trial=new StringBuffer();
          while (( line = input.readLine()) != null){
               trial.append(line);
               trial.append(System.getProperty("line.separator"));
          //InputStream is = new BufferedInputStream(new FileInputStream(l_file));
          System.out.println(trial.toString());
          //Blob b ;
          //byte[] bytes=trial.toString().getBytes();
          //System.out.println("Size-->"+bytes.length);
          xml_insert.setString(1,new String("SpecailChar"));
          //xml_insert.setBinaryStream(2,new ByteArrayInputStream(bytes),15920);
          xml_insert.setString(3,"SpecailChar");
          xml_insert.executeUpdate();
          p_conn.commit();
          } catch (ClassNotFoundException e) {
               System.out.println("ClassNotFoundException:"+e.getMessage());
          // Could not find the database driver
          } catch (SQLException e) {
               System.out.println("SQEXCEPTIN:"+e.getMessage());
          // Could not connect to the database
          }catch (FileNotFoundException e) {
               System.out.println("filenot found:"+e.getMessage());
          // Could not connect to the database
Error I'm getting is
error while trying with jdbc:
SQEXCEPTIN:[BEA][Oracle JDBC Driver]Error establishing socket to host and port: 10.20.3.19:1521. Reason: Connection refused

Is the Windows firewall active? Have you enabled the port on the firewall, if it is?

No sound on Windows 7 Boot Camp

I've had this problem for a while now, I just ignored it in the past, now I'm really fed up. I've tried everything, downloading Realteck, burning BootCamp drivers onto the CD (I have a Lion which came with no disc), I tried playing around with the Sound in Control Pannel. Someone please help me!

Then google for Cirrus Logic Audio for Mac running Windows.
Something like this...
MacBook Pro audio sound fix
http://realitypod.com/2010/07/macbook-pro-no-sound-in-windows-7-final-fix/
Cirrus Logic CS4206A (AB 11)
I tried downloading the "High Definition Codecs" driver from Cirrus Logic's website but the download link doesn't work.
http://www.cirrus.com/en/support/lic/lic3.html?uri=/en/pubs/software/CS4207WinVista_Win7_32-64-bit6-6001-1-30.zip
*MacBook Pro No Sound in Windows 7*
Posted by Geek on +Jul 23rd, 2010+
* You are running Vista or Windows 7 on a Macbook
* You have no or low audio/ sound. In macbook pro, you may also see a red light in your audio jack.
*Step 1:* Download the Macbook Pro Cirrus Logic CS4206A Driver from our server.
+(As a request, please do not hotlink this file anywhere else or our server will automatically remove the file from server.)+
+In case the above download link does not work google+ CirrusAudio.10.6.1.zip
*Step 2:* Extract the right type of Driver
(depending on your windows XP/ 7/ 32 bit/ 64bit)
Step3: for Windows 7 only: Right Click on exe file of driver.
Select Properties> Compatibility > run in compatibility mode
Select Windows Vista from drop down menu and Click OK
*Step 4:* Double click the driver and install.

Start Navigation sound in Windows 7 64 bit dissappeared

? [size="">I have been scratching my head over this one.
[size="">After doing a clean install of Windows 7 64 bit on a new build this week, and installing a new X-Fi PCIe Titanium Fatality Pro, I found the start navigation windows sound was no longer there - I am talking about the brief sound you hear, that sounds like a click, when you click a link, double click a folder to open , etc. I could find the sound in windows sounds, but when I pressed test I could not hear it.
[size="">
[size="">After much trial and error, I discovered that I had to disable sound blaster enhancements, in the properties tab for speakers in the sound card settings. I now have that windows sound back.
[size="">When I enable sound blaster enhancements, it goes away, when I disable them, it is back to normal.
[size="">
[size="">Is this normal or unique to me?

Wow, that fixed? my problem also by disabling soundblaster enhancements. How were you able to figure that one out? I was trying to figure it'sout also many months ago when I first got windows 7 beta and couldn't do it. Anyway,
Seems like most people don't like this start navigation sound, but I do.
I don't like the fact of having to disable soundblaster enhancements also.
Have you noticed that if you change the windows theme to something else it will actually work?

Dual Boot Windows 8 and Linux?

I have (UEFI System) an ASUS K55A UEFI motherboard laptop that came factory with Windows 8. I would like to install backtrack linux and Windows 8, but before I go screwing up my laptop, I want to see if this would be at all possible. I would use a virtual
machine, but I need Backtrack Linux on a physical machine for testing purposes as I am taking a course in computer forensics, and I want to test cracking my home wi-fi. My processor is an Intel Core i5 2.5 ghz with a 500 GB HDD and 8GB DDR3 RAM. Any insight
on this would be appreciated. Thank You.

Hi,
You can refer to this article to get detail information.
http://apcmag.com/how-to-dual-boot-windows-8-and-linux.htm
Niki Han
TechNet Community Support

Dual boot with Windows 7 and LINUX - Tecra A11 (PTSE1A-00L005)

Hi,
I bought a new Tecra A11 Laptop which runs WIN7 Pro. I want to install LINUX also. That means, I want to run my laptop in dual boot Win7 Pro/LINUX (any distributor). Please tell me how to do that.
There are 5 partitions on the HDD:
1. Active, Recovery partiton 1.46 Gb (no drive letter)
2. Active Primary C: Boot 145.04 Gb (NTFS)
3. Active Logical E: 78.13 Gb (NTFS)
4. Active Logical F: 64.25 Gb (NTFS)
5. Primary Partition 9.2 Gb (no drive letter, application unknown)
Hey, I need it badly, because I have admitted to a course of RHCE (Red Hat Certified Engineer)
Please help me

Hi
I may not be able to give You a step-by-step explanation but most distros today offer a possibility to co-exist with Windows.
During the installation the unused free space will be taken by Linux (with the consent of the user of course!!)
What exact setup is needed by You is impossible for anyone else to say, but I would suggest to make the space occupied by the F drive available for Linux.
You seem to have space enough for Windows and the Linux OS does not need much.
Some thoughts concerning your partition setup:
I would NOT touch 1,2 and 5 no matter what. They are your system and some system internal partitions (recovery environment and data) and would not be fun to lose.
1. Active, Recovery partiton 1.46 Gb (no drive letter)
2. Active Primary C: Boot 145.04 Gb (NTFS)
3. Active Logical E: 78.13 Gb (NTFS)
4. Active Logical F: 64.25 Gb (NTFS)
5. Primary Partition 9.2 Gb (no drive letter, application unknown)
So pick a Distro (my suggestion Ubuntu, Mint, Fedora, OpenSuse - Fedora will be the one closest related to RedHat) which will guide You through the steps to allocate space for Linux.
I would suggest however to remove the drive F in Windows so Linux does not start resizing all partitions.
I am sure that will work fine, but will just take time and the pretty unnecessary F drive will most surely be kept.
If You already have valuable data on your unit, make sure to back it up!! No software comes with warranties :)
Last but not least - make 100% sure to create a recovery set with the help of Toshiba Recovery media creator BEFORE you start installing Linux.
If something goes wrong You might want to have the possibility to put the unit back into factory state.
Good luck and keep asking if You need additional help!
Tom

DUAL BOOT windows 7 and linux HELP

MASTERS
im planing to have windows 7 and linux at the same time (DUAL BOOT)
but i dont know if one key recovery still works after installation
ihave lenovo g560
i3 @ 2.53
4gb ram
any advice guys?

hi botards01,
If you're planning to use linux occasionally (Ubuntu for example) and you don't want to risk losing the One Key Recovery functionality, try to install Ubuntu via Wubi as this doesn't repartition your HDD but creates a virtual disk on your current OS.
Check it out - Install Ubuntu in Windows With Wubi
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Dual booting pre-installed Windows 8 and Linux?

I just bought a G780 with Windows 8 pre-installed. Ideally, I would also like to install some flavor of Linux. I've been searching but not finding much info on how difficult or time-consuming this would be, or if there are any special considerations or anything. I've found some guides on dual-booting Windows 8 and Linux but they were all for installing Windows straight from a disk, not anything where it's already pre-installed, and some indicated they thought it might be problematic to use a pre-installed version of Windows. Anyway I was hoping that if anybody has done this on the G780 or even a similar laptop that you could share how it went and any difficulties you encountered. I'm open to using any Linux distro if it'll be easy to install. I would appreciate any info you could share. Thanks.

I had issues with Windows 8 as pre-installed on my G580, my employer at the time was using Windows 7 only and would not allow upgrades for security purposes. I deleted the entire drive (including hidden) knowing at some point I would re-install Windows 8 or later from retail disk when needed.
Linux can resize partitions during the install process, but be careful not to disturb the hidden partition or the windows boot loader in the process. Linux Mint is the best yet for this purpose, OpenSUSE and Fedora failed, CentOS failed and Ubuntu was not able to boot, but did not "hurt" the windows partitions.
Good luck.

Never used microphone input before, sound recorder window okay, no sound output.

Sound from sound recorder input goes nowhere, a sound window is supposed to open, it does not.
There is some software missing in my pavilion g7 laptop. Media player sound is fine, internet sound
is fine, only sound missing is from the microphone input. The sound recorder window is open and the
recording bar is moving as the input varies, how do I get the sound to the speakers. Never used this
option before, it might be defective from the factory.
This question was solved.
View Solution.

Problem solved. You cannot turn on computer with the microphone or other audio cable plugged in.
Otherwise the computer does not respond to the inputs, you have to plug in the microphone or audio
cable after logging in and then a window will open that allows you to select the that input over the default.

On windows: ok. on linux: failed, why? JBO-30003 and JBO-26061

I changed my password to my database connection in Jdeveloper and compiled my .war file and run in JBOSS under windows 2000 and windows98. It is ok without any problem. That's for testing purpose.
So after that when i put in Jboss running under linux (which is for daily operation) the problems occured:
JBO-30003: The application pool (Request.RequestModule.RequestModuleLocal) failed to checkout an application module due to the following exception:
oracle.jbo.DMLException:
JBO-26061: Error while opening JDBC connection.
plus one error: unable to logon, wrong username and pasword
anyone know how to solve this?
i've checked out bc4j.xcfg to look for whether i have changed to the correct user name and password and it is all right.
It ran perfectly under windows 2000 and windows 98 and linux but ever since i have change the password, it only run on windows 2000 and windows98. Anyone have solution to that? Your help is very much appreciated. =)

Are you using JDBC thin? What does your connection string look like?
Rob

No sound in Windows

No sound in Windows. Can not use radio or streaming

I posted this earlier this afternoon after trying multiple suggestions online. then I found the Answer:
http://www.simplehelp.net/2009/01/26/how-to-get-sound-working-in-windows-7-runni ng-via-boot-camp/
worked immediately

NO SOUND IN WINDOWS, YES IN LINUX... HP620

Similar Messages

Maybe you are looking for