No sound is coming from my HP pavilion dv5 laptop after automatic update

product name: HP pavilion dv5 laptop
operating system: windows vista 32 bit home primium
after automatic update  no sound is coming from my laptop.internal speaker are also not working.also windows starting sound is not coming.i also installed the drivers,update sound drivers but still sound is not coming.please give me perfect solution.

Hi,
Can you post back with the full Model No. and Product No. of your dv5 series notebook - see Here for a guide on locating this information.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Today,when i tried to listen music in my iphone 5 ,i noticed that my sound wasnt coming from the speakers but when i plugged earphone ,i listed the sound??

    today,when i tried to listen music in my iphone 5 ,i noticed that my sound wasnt coming from the speakers but when i plugged earphone ,i listened the sound?? i couldnt recognize the problem with my iphone?? really need help!!

    I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

  • Sound is coming from the ear-piece and its really really low

    Title pretty much says it.
    My iPhone is acting really weird ever since this morning, sound isnt coming from the bottom speakers anymore but instead from the ear-piece and its really low.
    I tried resetting the phone with holding down the home and sleep button at the same time but its still the same.
    Anyone else having this problem?

    Connect the headset to a computer or stereo or anything else with 3,5mm minijcack to see if the headset is ok of they work there then your headset is defect if not your phone is the problem

  • Why is the sound coming from the bottom of my laptop

    Im watching netflix and i can barely hear because the sound is only coming from the bottom of my laptop but my sound and speakers are all the way up

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue with your sound, and wanted to help! To start, can you provide me with the Product Number of your notebook?  Here is a link you can use that will help you find your Model and Product Number: How Do I Find My Model Number or Product Number?
    Also, did you have the issue before upgrading to Windows 10?  You can try using the HP Support Assistant to get the drivers you may need to resolve the issue for you.  You can also try a Hard Reset.  If that doesnt help, and this issue started after the upgrade, then you may consider using the Go back to an earlier build option, in your System Settings:HP Notebook PCs - Upgrading to Windows 10
    Once you are back to your original Operating System, check to see if you are experiencing the same issue. If not, then you may consider holding off on the Windows 10 update for a few weeks, until drivers can be updated.
    Please let me know if this information was helpful by clicking the thumbs up below.
    Have a great day!

  • Sound not coming from imac

    I am facing a very strange problem with my Imac. When i am pressing the volume keys on keyboard it is showing muted sign on the screen. No sound is coming from the speakers. Sometimes the muted sign automatically goes and also suddenly display on the screen. But when i am connecting a external headphone sound is coming. So is this a speaker problem or keyboard or any other hardware problem. What is the solution ?

    Your audio settings may have been changed.
    Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
    Change the Audio Output setting to 44100.0 Hz.
    Quit Audio MIDI Setup.
    More info here on no sound from built-in speakers:
    http://support.apple.com/kb/TS1574?viewlocale=en_US
    Or an SMC reset can often cure the problem:
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379

  • No sound is coming from speakers

    there is sound when I plug in headphones. this problem started after I updated to ios 6.1.6.
    I tried cleaning the headphone jack and reseting the phone.

    that's a good thing then that it only show s headphone when the headset is plugged in. then follow these steps reset all settings, settings, general, reset option at the bottom of general, reset all settings, And no you will not lose your information, if issue persist backup and restore your device as new and if that doesn't work, time for a replacement. If you are uncomfortable following these steps you might want to contact Apple 1-800-MY-APPl or setup appointment at the Apple store but do a backup before you head out to the store because they more then likely to restore your device which will Erase all your contents and settings.

  • How can I link specific cells in two different speadsheets so the data from a specific cell in spreadsheet A automatically updates in a specific cell in spreadsheet B. It works in Xcel- Any ideas?

    How can I link specific cells in two different tables so the data from a specific cell in table A automatically updates in a specific cell in table B? It works in Xcel- Any ideas?

    (1) your title ask the way to link different spreadsheets.
    In Numberland, a spreadsheet is an entire document.
    There is no way to link different documents.
    (2) in the message, you ask the way to link different tables.
    This feature is available and is described in iWork Formulas and Functions User Guide (which is available for free from the Help menu).
    Getting the info just requires a simple search in this available resource !
    Yvan KOENIG (VALLAURIS, France) 14 mai 2011 10:37:50

  • How do I avoid Outlook Mac 2011 Yahoo POP emails from downloading duplicate emails to Outlook after recent update to OSX 10.9?

    How do I avoid Outlook Mac 2011 Yahoo POP emails from downloading duplicate emails to Outlook after recent update to OSX 10.9?

    How do I avoid Outlook Mac 2011 Yahoo POP emails from downloading duplicate emails to Outlook after recent update to OSX 10.9?

  • My HP Pavilion dv5 laptop

    On my HP Pavilion dv5 laptop MY 2ND HP LAPTOP..NEVER AGAIN.I went to log in two weeks ago and it has a blue hallo screen saying trying to load files...I put out the word and was told it was NOT the hard drive (this time) I got a virus, this person got me back my Windows 7 , however, I do not see my HP icons, or tool bar or any info AT ALL ABOUT HP, How do I download all of my HP tools and software, such as my WEBCAM?????  Also, I now notice that while typing all of a sudden the cursers stops flashing and it falls back into the body of my typing and starts my typing back somewhere else ...VERY STRANGE...Can any one help me????I sure would appreciate any help....Thank you in advance.....Signed CHRISTL

    Why are you blaming HP for a virus and improper recovery of Windows 7?
    How to properly recover a HP Notebook
    If you did not make your HP recovery media, You can order recovery media here
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00810334&cc=us&lc=en&dlc=en

  • Why the sound of my ipad3 gone suddenly,not first time after i update the software

    Why the sound of my ipad3 gone suddenly,not first time after i update the software

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • No sound is coming from the speakers.

    I have a Mac Mini.   All of a sudden my speakers, which have been working for over a year quit. I and bought another set - same issue. I can hear the sound coming from the hard drive.  I've looked at the sound settings but I'm not quite that technical.  Can somebody help?

    If only it were that easy, but thanks!

  • Audio problem; can't seem to control where the sound is coming from!

    Good day!
    I am currently trying to set up a VERY basic "two camera shoot" using my built in iSight, and a Sony DCR-TRV315 Digital-8 w/FireWire camcorder.
    (I know, I know; I'm breaking all sorts of rules using such unmatched cameras. I'm a terrible videographer.)
    I'm NOT capturing from tape, however. I'm just using the lens of it to get a different shot. By just plugging it in, iMovie recognizes it, just as it would a FireWire webcam, and allows me to capture straight to the hard drive.
    To record audio, I'm using a Griffin iMic (USB preamp) with a Sony lavaliere mic.
    I have, of course, selected the iMic as the device for sound input in Sound Preferences.
    When I set the input camera to the built in iSight, the iMic kicks in and the lavaliere works like a dream. However; when I switch to the Sony camera, the iMic seems to get overridden, and the Sony camera's built-in mic kicks in! And the Sony camera isn't even IN the "choose a device for sound input" box in Sound Preferences!
    Is there any way to record JUST the video from the Sony DCR-TRV315, and keep the audio coming in from the iMic? I can't seem to find an audio preference that would control this, like you'd find in Garageband for example. This is a big problem. The look of the video changes enough between shots; I can't have the sound changing with it!
    Thanks for any help!

    Thanks everyone.
    Unfortunately, I think that M. Dubose is correct; for some reason, it doesn't want to seem to split up the FireWire input.
    The real kicker is that, by using the Griffin iMic along with the built-in iSight, I'm ALREADY getting sound and video from two separate sources. It just doesn't want to let me split this FireWire signal like it will the iSight's video signal/built in microphone.
    If it wasn't for this one thing, the input toggle could work quite effectively as a basic switcher. Hopefully, in future iMovie builds, the need for an independent iMovie Sound Prefs will be addressed, as that'd likely take care for this whole thing.
    The other issue is that the camera I'm using isn't true DV; it's Sony's proprietary Digital 8 format, which unfortunately, ain't too hot for image quality. That's why I'm hesitant to record to the tape and import. However, the lens and the FireWire port are still very valid, so by recording directly to the hard drive, it should have been fine for my needs.
    Also; the idea of THAT much precise editing in a single-channel software just makes my head spin. Switching inputs between shots would have been so much easier. Ah well. iMovie is a good program otherwise; I guess you just can't expect the world from free software, eh?
    I'll probably test it with a buddy's FireWire camcorder to make absolutely sure that it isn't just some freaky incompatibility keeping me from selecting the audio in of my choice. But I can't say that I'm too optimistic.
    Thanks again, everyone!

  • Sound not coming from blth speakers

    My 3g does not have stereo sound coming from both speakers. If I cover the left speaker when playing an i-tune, there is absolutely no sound coming from the right speaker. Also , my ringtone and speaker phone doesn't seem as lound as it should be, probably related to the above problem. When I use the earpieces the stereo sound is perfect. Does anyone know if this is the case with their phone? I'd like to know before I take it in. Thanks.

    The iPhone 3G only has one speaker, the right side is a microphone.
    glor

  • Creative I-Trigue L3800 Sound Only Coming From Subwoofer

    Hey all.
    Just wondering if anyone has any ideas as to why the sound is only coming through the subwoofer on a set of these speakers I have been using.
    Checked so far:
    Audio Cable connecting PC to Speaker system.
    Sound settings in Windows 7 (balance etc).
    Unplugged all speakers/control thingy etc and plugged back in.
    I am certain the problem is somewhere inside the subwoofer itself as I was watching something the night before they seemed to 'die'. I literally turned the PC back on this morning to watch something and the sound is now only coming from the subwoofer. I've taken the PCB out of the subwoofer to look for any obvious signs of damage but I'm not an electrician or a speaker expert. The only thing I can see is a slow-blow fuse which looks fine, and I'm guessing that if this were the culprit there would be no sound whatsoever.
    Any ideas? Obviously these are an old set of speakers but if there are any diagnostics I can do to perhaps find the cause and fix it, any help would be greatly appreciated as I currently have no decent device to play sound through.
    Thanks in advance.

    mattbell_5,
    Have you try using headphone on the laptop headphone jack and make sure that's working. If possible try plugging the speaker to another audio device like a MP3 player headphone jack and see whether the speaker is working properly.
    Jason

  • My sound is coming from my built in speakers instead of through the headphone jack.

    I have an Envy 15 1270ca and last night it froze while I was listening to music, forcing me to manually shut it off by holding down the power button. When the computer came back on, my sound was coming out of my built-in speakers instead of my external speakers through the headphone jack. I checked the speakers through my mp3 player, so I know that they are working, so it seems to be the jack which is not working.
    Any help is appreciated!
    This question was solved.
    View Solution.

    Please Reinstall the sound Drivers and Make sure that the no ear phones are plugged in when we reinstall the sound drivers, this should work even after doing this if its not working then please set the BIOS to defaults this should work
    I am an HP employee

Maybe you are looking for