No Sound Issue with PHASE88 sound card

K8T Neo series motherboard, socket 754 - NO SOUND ISSUE
I'm using a AMD athlon64 processor
I am having problems with my PHASE88 sound card. Windows XP regonises it and says the "driver is enabled but has not been started." I can't fix this problem in the device manager anywhere and so I was thinking it may be a conflict with the onboard Audio. I can't find in the BIOS where to disable the on board audio - can someone help?

Hi
Page 3-20 of manual
Integrated peripherals - onboardPCI controller - AC97 sound -disable it.
You may have to install device with New Hardware Wizard in Control panel.
cheers
Jocko

Similar Messages

Vista SP 1 Sound Issues with Creative Drivers

Hi all, I recently switched to a X-Fi Elite Pro, with a Nvidia Video Card.
Windows Vista SP (32bit)
Intel Pentium D .8 Ghz
2gb RAM
XFX GeForce 8600 GT 52mb running
Creative X-Fi Elite Pro
(it's been a while since I've needed this kind of support so let me know if more info is needed)
Anyways, from the moment Vista plays the logon sound there is static crackling and chirping noises whenever there is audio playing at the same time as any kind of visual change on the screen (not every screen update). For example videos on websites that play them as plugins are especially static-y. However, playing a fullscreen game (i.e. World of Warcraft) does not produce the static.
Interestingly, I have now tried two different video cards. The Nvidia and now a ATI Radeon, both have the same identical problem. I first thought that it might just be a Nvidia Issue but this is not the case
I have checked for IRQ conflicts and none exist that I can find. I have updated Windows as much as I think I can. I've tried changing Creative drivers as well.
Any advice is appreciated.Message Edited by djscotty on 0-04-2009 05:7 [email protected]

Re: Vista SP Sound Issues with Creative Drivers [email protected]

Sound issues with ga

hello, ill start out with the basics
system
AMD Athlon 64bit 3000+ .8ghz
MSI Neo2 mainboard
024MB ddr400 ram
ati radeon 9800 pro 28mb video card
soundblaster li've 24bit sound card
I am having various sound issues with a few games i play, most notably FarCry and Halo PC
Farcry is the main problem. about 2 minutes after opening the game, my headphones or speakers will flip out and produce a noise like a highly amplified dial up modem. I have already pursued help on the game forums, and had no luck. any help or suggestions would be appreciated
thanks

I do not use Skype, but may be information from the below linked article helpful.
https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
Best.

Sound issues with MacBook Pro

I am experiencing sound issues with my MacBook Pro. I am using a headset and when I am on a skype calsl I have a hard time hearing the other person, the sound is coming in and out and sounds digitized. This issue only started recently, the sound had been working fine for years before this issue.

I do not use Skype, but may be information from the below linked article helpful.
https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
Best.

I am having sound issues with Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmated. I can hear samples of audio books in the store section. Any ideas?

I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.

I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.

Issues with loud sound settings over headphones.

My Ipad 2 has been having some issues with the sound settings when I put the volume up loud. When I go past a certain level there is a "popping" sound and the volume cuts out all together. If I reduce the volume this popping sound happens again and the volume comes back on.
This only happens through the headphones, and doesn't happen with the external speaker.
Have I stuffed up one of the settings? Is this an OS update issue or do I need to replace the headphone jack?
I have reset all the settings, but haven't done a complete restore yet.
Thanks

Why is everybody posting Flash Player questions in the Shockwave Player forum???

Sound issue with apple tv

hi ,
I am getting sound issue with my apple tv recently. when you navigate around the apple tv menu, the sounds are there but when i try to play any video, the sound is not coming out. (Same with airplay)
The issue can be fix with restarting my apple TV. However, i want a permanent fix. it's not APPLE product at all to always restart to get the apple TV to play sound.
Anyone know any permanent fix? All the software are latest.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Sources of Interference
Wifi Diagnostic Software (for Mac users)

Having sound issues with Mid 2011 iMac 27"

Having sound issues with Mid 2011 iMac 27". It has 10.10.2 OS X. Could this the issue and if so how do I revert to 10.7.3

It is almost impossible to diagnose sounds over the internet, however here is a link to some failing HD sounds. If one of yours be happy, at any rate take it in for service. If you got AppleCare or it's less than a year old it's covered.
Failing hard drive sounds

After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues.

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

I added an iTunes card to my account. THe balance shows on the account, but I can not download, because iTunes has an issue with the debit card linked to the account. Shouldn't it default to the balance from the card I added?

iTunes keeps telling me my debit card is declined, when I am trying to use an iTunes card that I added today. The amount from the iTunes card shows on the account.

You need to fix the issue with the credit card on the iTunes account or you can remove the credit card.

Ok, so I have a 1g macbook Pro and I'm having an issue with the graphics card, so I believe.

     I believe I'm having an issue with the graphics card. For one, when I'm using programs like iMovie '11, SPORE, or the Sims 3 for long periods (hours usualy) of time, the computer will be perfectly fine. It gets warmish-hot, like usuall, all of a sudden it will randomly freeze for 5 to 10 seconds, then shut down and reststart. This happens, espically on the Sims 3 I can play for a while, but when I try to save it will shut down on me.
     Also, I got a new iPod touch 4g on the 25th, the first few times I tried syncing and downloading, it started off fine, but after 10 min. it would restart. Now it works ok, but I still monitor it just incase.
     Can anyone help me understand why all of this is happening? I beleve the graphics card isn't good enough, even though it meets the standards for iLife, and The Sims 3. My graphics card is a ATI,RadeonX1600. The laptop has 2 GB RAM runs at 2.16GHz with an Intel Core Duo on OS X Snow Lepard (10.6.8). Thanks everyone.

Threads are just processes that link together like the threads in these discussions, well, maybe that is a bad example given how disjointed these get
It looks like you are not pushing the cpu or hard drive enough to cause your behavior. Not sure what the temperature limit on that cpu is, on the newer models it is around 100-110 °C which is notciabley hot, and the system shutsdown for self protection at the thermal limit.
You could be hitting a thermal limit causing that behavior...so do you see good behavior at lower load levela on the system? Does this only happen with when you are under the high graphic loads?
Trying to zero in on when this occurs to see if we an isolate the problem.

Issues with games, video card issue?

Hi,
I have been having issues with games lately. Mostly they are hidden object games from Big Fish, but they start up then minimize, it doesn't crash completely just minimizes, I click on it again and it works for a few seconds and minimizes itself again and again. I am unable to play the games because it keeps minimizing. could this be an issue with my video card? I have attempted updating it but it doesn't seem to help. Any ideas?

Ok OK, Update...
the games work perfectly on my father's HP which runs windows 7...so it definatly is NOT because of not updated stuff....I really dont know what else to do at this point....no suggestions from anyone?!?!?!

HT203254 Issues with the graphics card on 2008 Macbook Pro

So if I am having issues with the graphics card and my Macbook is among those from 2008 affected but it is after the free repair program has ended, how can I repair it myself? What parts need to be replaced?

So if I am having issues with the graphics card and my Macbook is among those from 2008 affected but it is after the free repair program has ended, how can I repair it myself? What parts need to be replaced?

Sound Issues with Mac OS X 10.4.10 ?

I had successfully updated to 10.4.10. However, now whenever I use iTunes and start a song, I get a "Pop" noise from my Creature II speaker system. After I stop the song and a few seconds later, I get a "Pop" noise from my speakers. So, it sounds like the MacMini is initializing the speaker before and after playing sound through the sound card. I don't know. Has anyone has issues with this "Pop" noise? Is there a setting I can look at to get rid of this "initializing" sound? This is driving me nuts! I do not remember this "Pop" sound during my normal usage under 10.4.9. Thanks, Tony.

My wife's mini had a similar issue. She upgraded to 10.4.10 and her sound stopped working. She would also get the login screen freezes. Where her computer is located, turning off Airport is not an option, and the sound issue is very frustrating. I helped her restore her entire computer from a 10.4.9 backup she had made just a couple days before, and while the lockup problems are gone, the headphone jack still will not output sound. Just two pops when you plug the speakers in, and that's it. I've tried resetting the PMU with no luck. I hope Apple fixes whatever it is they screwed up, and soon. I won't be applying 10.4.10 to any of my other machines.

No Sound Issue with PHASE88 sound card

Similar Messages

Maybe you are looking for